Tellurophene-Based Random Copolymers for High Responsivity and Detectivity Photodetectors

Rongalite in PEG-400 as a general and reusable system for the synthesis of 2,5-disubstituted chalcogenophenes

Herein we report the use of rongalite in PEG-400 as a general, efficient, and environmentally benign reductive system for the synthesis of a wide range of 2,5-disubstituted chalcogenophenes from elemental sulfur, selenium and tellurium.

Visible-blind ultraviolet narrowband photomultiplication-type organic photodetector with an ultrahigh external quantum efficiency of over 1 000 000

A visible-blind ultraviolet (UV) photodetector can detect UV signals and is not interfered with by visible light or infrared light in the environment. In order to realize high-performance visible-blind UV organic photodetectors (OPDs), we design photomultiplication-type (PM-type) OPDs by using a novel strategy. Firstly, wide bandgap organic semiconductor materials, which do not absorb visible light, are selected as donors to absorb UV light. Secondly, a very small amount of C₆₀ is used as an acceptor to trap photogenerated electrons. These accumulating electrons near the Al electrode form a potential, which leads to band bending and narrowing of the interface barrier, thereby assisting hole-tunneling injection to form a multiplication. The fabricated visible-blind UV PM-type OPDs with donor/acceptor doping ratio of 50 : 1 exhibit a narrowband response with full-width at half-maximum (FWHM) of approximately 36 nm, an ultrahigh external quantum efficiency of 1.08 × 10⁶% and a remarkable specific detectivity of 1.28 × 10¹⁴ jones at 335 nm wavelength under -14 V bias. The UV-to-visible rejection ratio exceeds 10³ by adjusting the donor/acceptor mixing ratios. The devices made with other wide bandgap organic materials also showed similar performance, indicating that this device structure provides an effective method for the preparation of high-performance visible-blind UV PM-type OPDs. In addition, we prepared a flexible visible-blind UV PM-type OPD based on a PET substrate and integrated it with a flexible OLED to fabricate a wearable UV monitor, which can visually detect the intensity of UV light.

Naphthalene diimides: perspectives and promise

In this review, we describe the developments in the field of naphthalene diimides (NDIs) from 2016 to the presentday. NDIs are shown to be an increasingly interesting class of molecules due to their electronic properties, large electron deficient aromatic cores and tendency to self-assemble into functional structures. Almost all NDIs possess high electron affinity, good charge carrier mobility, and excellent thermal and oxidative stability, making them promising candidates for applications in organic electronics, photovoltaic devices, and flexible displays. NDIs have also been extensively studied due to their potential real-world uses across a wide variety of applications including supramolecular chemistry, sensing, host-guest complexes for molecular switching devices, such as catenanes and rotaxanes, ion-channels, catalysis, and medicine and as non-fullerene accepters in solar cells. In recent years, NDI research with respect to supramolecular assemblies and mechanoluminescent properties has also gained considerable traction. Thus, this review will assist a wide range of readers and researchers including chemists, physicists, biologists, medicinal chemists and materials scientists in understanding the scope for development and applicability of NDI dyes in their respective fields through a discussion of the main properties of NDI derivatives and of the status of emerging applications.

Lateral Photodetectors Based on Double-Cable Polymer/Two-Dimensional Perovskite Heterojunction

Double-cable conjugated polymers and two-dimensional (2D) perovskites are both promising materials for next-generation photodetectors (PDs) due to their solution processibility and tunable optoelectronic properties. In this work, a lateral PD is designed by layering a double-cable conjugated polymer film atop a 2D Ruddlesden-Popper perovskite film. Compared to the corresponding single-layer polymer and perovskite PDs, the heterojunction device exhibits greatly improved performance with a high responsivity of 27.06 A W^-1, an on/off ratio of 1379, and a short rise/decay time of 3.53/3.78 ms. In addition, a flexible device using polyimide as the substrate is successfully fabricated and exhibits comparable performance with the device on glass. This work demonstrates the great potential of double-cable polymer/2D perovskite heterojunctions in future flexible optoelectronics.

Metallacycle Transfer and its Link to Light-Emitting Materials and Conjugated Polymers

Major advances in optoelectronic technologies (e. g., solar cells, organic light-emitting diodes, etc…) are prefaced by the discovery of new synthetic methodologies. In this review, the key role of the Fagan-Nugent reaction in enabling our team (and others) to gain access to new building blocks for luminescent materials and conjugated polymers bearing p-block elements will be described. The Fagan-Nugent reaction is extremely powerful as a synthetic tool since the efficient zirconium-element atom exchange involved affords a wide range of unsaturated inorganic heterocycles of controllable composition and function.

The Synthesis and Optoelectronic Applications for Tellurophene-Based Small Molecules and Polymers

Tellurophene-based small molecules and polymers have received great attentions owing to their applications in thin-film transistors, solar cells, and sensors. This article reviews the current progress of the synthesis and applications of tellurophene-based small molecules and polymers. The physicochemical properties and optoelectronic applications of tellurophene-based materials are summarized and discussed. In the end, the challenges and outlook of tellurophene-based materials are presented.

High-Performance All-Polymer Photodetectors via a Thick Photoactive Layer Strategy

To achieve high detectivity in all-polymer photodetectors (all-PPDs), a thick-film photoactive layer is favored because it can effectively suppress the dark current density. However, if the photoactive layer of the film is too thick, it leads to reduced responsivity owing to increased recombination loss. We developed high-performance all-PPDs by using a narrowband-gap p-type polymer NT40 and an n-type polymer poly{[ N, N'-bis(2-octyldodecyl)-naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]- alt-5,5'-(2,2'bithiophene)} as the photoactive layer. The high charge carrier mobility of both copolymers enabled a photoactive layer thickness of 300 nm, leading to an ultralow dark current density of 4.85 × 10^-10 A cm^-2, a detectivity of 2.61 × 10¹³ Jones, a high responsivity of 0.33 A W^-1 at 720 nm, and a bias of -0.1 V. The detectivity achieved >10¹³ Jones in a wide range from 360 to 850 nm, which is among the highest values so far reported for all-PPDs without extra gains. More importantly, the resultant all-PPDs exhibited a high working frequency over 10 kHz associated with a large linear dynamic range. These findings demonstrate great potential for practical applications of the all-PPDs developed in this work.

Study on photoelectric characteristics of monolayer WS2 films

It is important to determine the time-dependent evolution of the excited monolayer WS₂, which will provide a basis for the reasonable design of optoelectronic devices based on two-dimensional transition metal dichalcogenides. Here, we made a simple and large-area photodetector based on the monolayer WS₂, with high light sensitivity and fast response, benefiting from the special dynamics of carrier involving the exciton, trion, and charge. Moreover, we tested the relaxation behavior of the excited monolayer WS₂ by employing transient absorption (TA). It was found that the multi-body interaction among exciton would occur after the density of pump photon increases to 3.45 × 10¹⁴ photons per cm². The exciton dissociation accompanying the generation of trion would appear in the photo-induced relaxation process, which would be a benefit for the operation of this photodetector. Increasing the energy of the exciton is good for the generation of carrier by comparing the relaxation behavior of WS₂ excited to A and B exciton states. However, the bound exciton relaxation, originating from the capture process of the defect state, would exist and play an unfavorable role during the functioning of devices.

It is important to determine the time-dependent evolution of the excited monolayer WS₂, which will provide a basis for the reasonable design of optoelectronic devices based on two-dimensional transition metal dichalcogenides.

Synthesis and self-assembly of thiol-modified tellurophenes

An asymmetric thiol-modified tellurophene was designed and synthesized, and the ability of the compound to form a monolayer on a gold electrode was confirmed. The surface-active tellurophene was synthesized using Cadiot–Chodkiewicz coupling followed by ring closing and thiol modification. The tellurophene compound forms a monolayer on gold surfaces from a concentrated solution within 24 h. The ability of the compound to conjugate to gold is confirmed by X-ray photoelectron spectroscopy (XPS). A surface blocking experiment was used to evaluate the extent of formation of a monolayer on a gold electrode.