Superior Robust Ultrathin Single-Crystalline Silicon Carbide Membrane as a Versatile Platform for Biological Applications

Simulations of Infrared Reflectivity and Transmission Phonon Spectra for Undoped and Doped GeC/Si (001)

Exploring the phonon characteristics of novel group-IV binary XC (X = Si, Ge, Sn) carbides and their polymorphs has recently gained considerable scientific/technological interest as promising alternatives to Si for high-temperature, high-power, optoelectronic, gas-sensing, and photovoltaic applications. Historically, the effects of phonons on materials were considered to be a hindrance. However, modern research has confirmed that the coupling of phonons in solids initiates excitations, causing several impacts on their thermal, dielectric, and electronic properties. These studies have motivated many scientists to design low-dimensional heterostructures and investigate their lattice dynamical properties. Proper simulation/characterization of phonons in XC materials and ultrathin epilayers has been challenging. Achieving the high crystalline quality of heteroepitaxial multilayer films on different substrates with flat surfaces, intra-wafer, and wafer-to-wafer uniformity is not only inspiring but crucial for their use as functional components to boost the performance of different nano-optoelectronic devices. Despite many efforts in growing strained zinc-blende (zb) GeC/Si (001) epifilms, no IR measurements exist to monitor the effects of surface roughness on spectral interference fringes. Here, we emphasize the importance of infrared reflectivity Rω and transmission Tω spectroscopy at near normal θi = 0 and oblique θi ≠ 0 incidence (Berreman effect) for comprehending the phonon characteristics of both undoped and doped GeC/Si (001) epilayers. Methodical simulations of Rω and Tω revealing atypical fringe contrasts in ultrathin GeC/Si are linked to the conducting transition layer and/or surface roughness. This research provided strong perspectives that the Berreman effect can complement Raman scattering spectroscopy for allowing the identification of longitudinal optical ωLO phonons, transverse optical ωTO phonons, and LO-phonon-plasmon coupled ωLPP+ modes, respectively.

High-Strength Amorphous Silicon Carbide for Nanomechanics

For decades, mechanical resonators with high sensitivity have been realized using thin-film materials under high tensile loads. Although there are remarkable strides in achieving low-dissipation mechanical sensors by utilizing high tensile stress, the performance of even the best strategy is limited by the tensile fracture strength of the resonator materials. In this study, a wafer-scale amorphous thin film is uncovered, which has the highest ultimate tensile strength ever measured for a nanostructured amorphous material. This silicon carbide (SiC) material exhibits an ultimate tensile strength of over 10 GPa, reaching the regime reserved for strong crystalline materials and approaching levels experimentally shown in graphene nanoribbons. Amorphous SiC strings with high aspect ratios are fabricated, with mechanical modes exceeding quality factors 108 at room temperature, the highest value achieves among SiC resonators. These performances are demonstrated faithfully after characterizing the mechanical properties of the thin film using the resonance behaviors of free-standing resonators. This robust thin-film material has significant potential for applications in nanomechanical sensors, solar cells, biological applications, space exploration, and other areas requiring strength and stability in dynamic environments. The findings of this study open up new possibilities for the use of amorphous thin-film materials in high-performance applications.

Customizable Microfluidic Devices: Progress, Constraints, and Future Advances

The field of microfluidics encompasses the study of fluid behavior within micro-channels and the development of miniature systems featuring internal compartments or passageways tailored for fluid control and manipulation. Microfluidic devices capitalize on the unique chemical and physical properties exhibited by fluids at the microscopic scale. In contrast to their larger counterparts, microfluidic systems offer a multitude of advantages. Their implementation facilitates the investigation and utilization of reduced sample, solvent, and reagent volumes, thus yielding decreased operational expenses. Owing to their compact dimensions, these devices allow for the concurrent execution of multiple procedures, leading to expedited experimental timelines. Over the past two decades, microfluidics has undergone remarkable advancements, evolving into a multifaceted discipline. Subfields such as organ-on-a-chip and paper-based microfluidics have matured into distinct fields of study. Nonetheless, while scientific progress within the microfluidics realm has been notable, its translation into autonomous end-user applications remains a frontier to be fully explored. This paper sets forth the central objective of scrutinizing the present research paradigm, prevailing limitations, and potential prospects of customizable microfluidic devices. Our inquiry revolves around the latest strides achieved, prevailing constraints, and conceivable trajectories for adaptable microfluidic technologies. We meticulously delineate existing iterations of microfluidic systems, elucidate their operational principles, deliberate upon encountered limitations, and provide a visionary outlook toward the future trajectory of microfluidic advancements. In summation, this work endeavors to shed light on the current state of microfluidic systems, underscore their operative intricacies, address incumbent challenges, and unveil promising pathways that chart the course toward the next frontier of microfluidic innovation.

Single-Ion Counting with an Ultra-Thin-Membrane Silicon Carbide Sensor

In recent times, ion implantation has received increasing interest for novel applications related to deterministic material doping on the nanoscale, primarily for the fabrication of solid-state quantum devices. For such applications, precise information concerning the number of implanted ions and their final position within the implanted sample is crucial. In this work, we present an innovative method for the detection of single ions of MeV energy by using a sub-micrometer ultra-thin silicon carbide sensor operated as an in-beam counter of transmitted ions. The SiC sensor signals, when compared to a Passivated Implanted Planar Silicon detector signal, exhibited a 96.5% ion-detection confidence, demonstrating that the membrane sensors can be utilized for high-fidelity ion counting. Furthermore, we assessed the angular straggling of transmitted ions due to the interaction with the SiC sensor, employing the scanning knife-edge method of a focused ion microbeam. The lateral dimension of the ion beam with and without the membrane sensor was compared to the SRIM calculations. The results were used to discuss the potential of such experimental geometry in deterministic ion-implantation schemes as well as other applications.

Wide bandgap semiconductor nanomembranes as a long-term biointerface for flexible, implanted neuromodulator

Electrical neuron stimulation holds promise for treating chronic neurological disorders, including spinal cord injury, epilepsy, and Parkinson's disease. The implementation of ultrathin, flexible electrodes that can offer noninvasive attachment to soft neural tissues is a breakthrough for timely, continuous, programable, and spatial stimulations. With strict flexibility requirements in neural implanted stimulations, the use of conventional thick and bulky packages is no longer applicable, posing major technical issues such as short device lifetime and long-term stability. We introduce herein a concept of long-lived flexible neural electrodes using silicon carbide (SiC) nanomembranes as a faradic interface and thermal oxide thin films as an electrical barrier layer. The SiC nanomembranes were developed using a chemical vapor deposition (CVD) process at the wafer level, and thermal oxide was grown using a high-quality wet oxidation technique. The proposed material developments are highly scalable and compatible with MEMS technologies, facilitating the mass production of long-lived implanted bioelectrodes. Our experimental results showed excellent stability of the SiC/silicon dioxide (SiO₂) bioelectronic system that can potentially last for several decades with well-maintained electronic properties in biofluid environments. We demonstrated the capability of the proposed material system for peripheral nerve stimulation in an animal model, showing muscle contraction responses comparable to those of a standard non-implanted nerve stimulation device. The design concept, scalable fabrication approach, and multimodal functionalities of SiC/SiO₂ flexible electronics offer an exciting possibility for fundamental neuroscience studies, as well as for neural stimulation-based therapies.

Integrated, Transparent Silicon Carbide Electronics and Sensors for Radio Frequency Biomedical Therapy

The integration of micro- and nanoelectronics into or onto biomedical devices can facilitate advanced diagnostics and treatments of digestive disorders, cardiovascular diseases, and cancers. Recent developments in gastrointestinal endoscopy and balloon catheter technologies introduce promising paths for minimally invasive surgeries to treat these diseases. However, current therapeutic endoscopy systems fail to meet requirements in multifunctionality, biocompatibility, and safety, particularly when integrated with bioelectronic devices. Here, we report materials, device designs, and assembly schemes for transparent and stable cubic silicon carbide (3C-SiC)-based bioelectronic systems that facilitate tissue ablation, with the capability for integration onto the tips of endoscopes. The excellent optical transparency of SiC-on-glass (SoG) allows for direct observation of areas of interest, with superior electronic functionalities that enable multiple biological sensing and stimulation capabilities to assist in electrical-based ablation procedures. Experimental studies on phantom, vegetable, and animal tissues demonstrated relatively short treatment times and low electric field required for effective lesion removal using our SoG bioelectronic system. In vivo experiments on an animal model were conducted to explore the versatility of SoG electrodes for peripheral nerve stimulation, showing an exciting possibility for the therapy of neural disorders through electrical excitation. The multifunctional features of SoG integrated devices indicate their high potential for minimally invasive, cost-effective, and outcome-enhanced surgical tools, across a wide range of biomedical applications.

Fibrillar Nanomembranes of Recombinant Spider Silk Protein Support Cell Co-culture in an In Vitro Blood Vessel Wall Model

Basement membrane is a thin but dense network of self-assembled extracellular matrix (ECM) protein fibrils that anchors and physically separates epithelial/endothelial cells from the underlying connective tissue. Current replicas of the basement membrane utilize either synthetic or biological polymers but have not yet recapitulated its geometric and functional complexity highly enough to yield representative in vitro co-culture tissue models. In an attempt to model the vessel wall, we seeded endothelial and smooth muscle cells on either side of 470 ± 110 nm thin, mechanically robust, and nanofibrillar membranes of recombinant spider silk protein. On the apical side, a confluent endothelium formed within 4 days, with the ability to regulate the permeation of representative molecules (3 and 10 kDa dextran and IgG). On the basolateral side, smooth muscle cells produced a thicker ECM with enhanced barrier properties compared to conventional tissue culture inserts. The membranes withstood 520 ± 80 Pa pressure difference, which is of the same magnitude as capillary blood pressure in vivo. This use of protein nanomembranes with relevant properties for co-culture opens up for developing advanced in vitro tissue models for drug screening and potent substrates in organ-on-a-chip systems.

Old is Gold: Electrolyte Aging Influences the Topography, Chemistry, and Bioactivity of Anodized TiO2 Nanopores

Titanium dioxide (TiO₂) nanostructures including nanopores and nanotubes have been fabricated on titanium (Ti)-based orthopedic/dental implants via electrochemical anodization (EA) to enable local drug release and enhanced bioactivity. EA using organic electrolytes such as ethylene glycol often requires aging (repeated anodization of nontarget Ti) to fabricate stable well-ordered nanotopographies. However, limited information is available with respect to its influence on topography, chemistry, mechanical stability, and bioactivity of the fabricated structures. In the current study, titania nanopores (TNPs) using a similar voltage/time were fabricated using different ages of electrolyte (fresh/0 h to 30 h aged). Current density vs time plots of EA, changes in the electrolyte (pH, conductivity, and Ti/F ion concentration), and topographical, chemical, and mechanical characteristics of the fabricated TNPs were compared. EA using 10-20 h electrolytes resulted in stable TNPs with uniform size and improved alignment (parallel to the underlying substrate microroughness). Additionally, to evaluate bioactivity, primary human gingival fibroblasts (hGFs) were cultured onto various TNPs in vitro. The findings confirmed that the proliferation and morphology of hGFs were enhanced on 10-20 h aged electrolyte anodized TNPs. This pioneering study systematically investigates the optimization of anodization electrolyte toward fabricating nanoporous implants with desirable characteristics.

Functional Microarray Platform with Self-Assembled Monolayers on 3C-Silicon Carbide

Currently available bioplatforms such as microarrays and surface plasmon resonators are unable to combine high-throughput multiplexing with label-free detection. As such, emerging microelectromechanical systems (MEMS) and microplasmonics platforms offer the potential for high-resolution, high-throughput label-free sensing of biological and chemical analytes. Therefore, the search for materials capable of combining multiplexing and label-free quantitation is of great significance. Recently, interest in silicon carbide (SiC) as a suitable material in numerous biomedical applications has increased due to its well-explored chemical inertness, mechanical strength, bio- and hemocompatibility, and the presence of carbon that enables the transfer-free growth of graphene. SiC is also multifunctional as both a wide-band-gap semiconductor and an efficient low-loss plasmonics material and thus is ideal for augmenting current biotransducers in biosensors. Additionally, the cubic variant, 3C-SiC, is an extremely promising material for MEMS, being a suitable platform for the easy micromachining of microcantilevers, and as such capable of realizing the potential of real time miniaturized multiplexed assays. The generation of an appropriately functionalized and versatile organic monolayer suitable for the immobilization of biomolecules is therefore critical to explore label-free, multiplexed quantitation of biological interactions on SiC. Herein, we address the use of various silane self-assembled monolayers (SAMs) for the covalent functionalization of monocrystalline 3C-SiC films as a novel platform for the generation of functionalized microarray surfaces using high-throughput glycan arrays as the model system. We also demonstrate the ability to robotically print high throughput arrays on free-standing SiC microstructures. The implementation of a SiC-based label-free glycan array will provide a proof of principle that could be extended to the immobilization of other biomolecules in a similar SiC-based array format, thus making potentially significant advances to the way biological interactions are studied.

Transparent crystalline cubic SiC-on-glass electrodes enable simultaneous electrochemistry and optical microscopy

This work presents crystalline SiC-on-glass as a transparent, robust, and optically stable electrode for simultaneous electrochemical characterization and optical microscope imaging. Experimental results show a large potential window, as well as excellent stability and repeatability over multiple cyclic voltammetric scans in common redox biomarkers such as ruthenium hexaammine and methylene blue. The high optical transmittance and biocompatibility of SiC-on-glass were also observed, enabling cell culture, electrical stimulation, and high resolution fluorescence imaging. This new platform opens exciting opportunities in multi-functional biosensing-probes and observation.