Hydrothermal Synthesis of a New Kind of N-Doped Graphene Gel-like Hybrid As an Enhanced ORR Electrocatalyst

Comprehensive Insights and Advancements in Gel Catalysts for Electrochemical Energy Conversion

Continuous worldwide demands for more clean energy urge researchers and engineers to seek various energy applications, including electrocatalytic processes. Traditional energy-active materials, when combined with conducting materials and non-active polymeric materials, inadvertently leading to reduced interaction between their active and conducting components. This results in a drop in active catalytic sites, sluggish kinetics, and compromised mass and electronic transport properties. Furthermore, interaction between these materials could increase degradation products, impeding the efficiency of the catalytic process. Gels appears to be promising candidates to solve these challenges due to their larger specific surface area, three-dimensional hierarchical accommodative porous frameworks for active particles, self-catalytic properties, tunable electronic and electrochemical properties, as well as their inherent stability and cost-effectiveness. This review delves into the strategic design of catalytic gel materials, focusing on their potential in advanced energy conversion and storage technologies. Specific attention is given to catalytic gel material design strategies, exploring fundamental catalytic approaches for energy conversion processes such as the CO2 reduction reaction (CO2RR), oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and more. This comprehensive review not only addresses current developments but also outlines future research strategies and challenges in the field. Moreover, it provides guidance on overcoming these challenges, ensuring a holistic understanding of catalytic gel materials and their role in advancing energy conversion and storage technologies.

Efficient removal of levofloxacin by a magnetic NiFe-LDH/N-MWCNTs nanocomposite: Characterization, response surface methodology, and mechanism

Antibiotic pollutants in water bodies, was studied to remove using an oxidized, nitrogen-doped, and Fe₃O₄ and NiFe-LDH decorated MWCNT (magnetic NiFe-LDH/N-MWCNTs) nanocomposite (NC). The novel, engineered NC was characterized by different techniques of SEM, XRD, TEM, EDX, and XPS and then examined under different main effective parameters of NC dose, levofloxacin (LVX) concentration, pH, time, and temprature. The experimentally obtained data then evaluated using the modeling approaches of RSM, GRNN, and ANFIS. The as prepared adsorbent showed an excellent adsorption performance (removal efficiency = 95.28% and adsorption capacity = 344.83-454.55 mg/g) under the respective values of the mentioned parameters of 0.152 g, 23.01 mg/L, 12.00 min, and 37.5 °C, respectively. The comparison of the models showed that although all of them accurately predicted the removal efficiency, ANFIS presented the best capability with R², RMSE, MSE, MAE, as well as AAD of 0.9998, 0.0082, -0.0004, 0.0069, 0.1322, respectively. The adsorption by the NC followed Freundlich isotherm (R² = 0.9993) and PSO kinetic (>0.998) models, confirming a heterogenous chemisorption process. The thermodynamic parameters showed an endothermic and spontaneous nature for LVX removal by magnetic NiFe-LDH/N-MWCNTs NC. A high-performance efficiency, appropriate reusability (five times without loss of efficiency), as well as easy separation due to magnetic properties, makes the NC to a promising option in removing LVX from water.

Recent Advancements in the Synthesis and Application of Carbon-Based Catalysts in the ORR

Fuel cells are a promising alternative to non-renewable energy production industries such as petroleum and natural gas. The cathodic oxygen reduction reaction (ORR), which makes fuel cell technology possible, is sluggish under normal conditions. Thus, catalysts must be used to allow fuel cells to operate efficiently. Traditionally, platinum (Pt) catalysts are often utilized as they exhibit a highly efficient ORR with low overpotential values. However, Pt is an expensive and precious metal, posing economic problems for commercialization. Herein, advances in carbon-based catalysts are reviewed for their application in ORRs due to their abundance and low-cost syntheses. Various synthetic methods from different renewable sources are presented, and their catalytic properties are compared. Likewise, the effects of heteroatom and non-precious metal doping, surface area, and porosity on their performance are investigated. Carbon-based support materials are discussed in relation to their physical properties and the subsequent effect on Pt ORR performance. Lastly, advances in fuel cell electrolytes for various fuel cell types are presented. This review aims to provide valuable insight into current challenges in fuel cell performance and how they can be overcome using carbon-based materials and next generation electrolytes.

Nitrogen-Doped Reduced Graphene Oxide Supported Pd4.7Ru Nanoparticles Electrocatalyst for Oxygen Reduction Reaction

It is imperative to design an inexpensive, active, and durable electrocatalyst in oxygen reduction reaction (ORR) to replace carbon black supported Pt (Pt/CB). In this work, we synthesized Pd_4.7Ru nanoparticles on nitrogen-doped reduced graphene oxide (Pd_4.7Ru NPs/NrGO) by a facile microwave-assisted method. Nitrogen atoms were introduced into the graphene by thermal reduction with NH₃ gas and several nitrogen atoms, such as pyrrolic, graphitic, and pyridinic N, found by X-ray photoelectron spectroscopy. Pyridinic nitrogen atoms acted as efficient particle anchoring sites, making strong bonding with Pd_4.7Ru NPs. Additionally, carbon atoms bonding with pyridinic N facilitated the adsorption of O₂ as Lewis bases. The uniformly distributed ~2.4 nm of Pd_4.7Ru NPs on the NrGO was confirmed by transmission electron microscopy. The optimal composition between Pd and Ru is 4.7:1, reaching −6.33 mA/cm² at 0.3 V_RHE for the best ORR activity among all measured catalysts. Furthermore, accelerated degradation test by electrochemical measurements proved its high durability, maintaining its initial current density up to 98.3% at 0.3 V_RHE and 93.7% at 0.75 V_RHE, whereas other catalysts remained below 90% at all potentials. These outcomes are considered that the doped nitrogen atoms bond with the NPs stably, and their electron-rich states facilitate the interaction with the reactants on the surface. In conclusion, the catalyst can be applied to the fuel cell system, overcoming the high cost, activity, and durability issues.

Nitrogen Functionalization of CVD Grown Three-Dimensional Graphene Foam for Hydrogen Evolution Reactions in Alkaline Media

Three-dimensional graphene foam (3D-GrFoam) is a highly porous structure and sustained lattice formed by graphene layers with sp2 and sp3 hybridized carbon. In this work, chemical vapor deposition (CVD)-grown 3D-GrFoam was nitrogen-doped and platinum functionalized using hydrothermal treatment with different reducing agents (i.e., urea, hydrazine, ammonia, and dihydrogen hexachloroplatinate (IV) hydrate, respectively). X-ray photoelectron spectroscopy (XPS) survey showed that the most electrochemically active nitrogen-doped sample (GrFoam3N) contained 1.8 at % of N, and it exhibited a 172 mV dec-1 Tafel plot associated with the Volmer-Heyrovsky hydrogen evolution (HER) mechanism in 0.1 M KOH. By the hydrothermal process, 0.2 at % of platinum was anchored to the graphene foam surface, and the resultant sample of GrFoamPt yielded a value of 80 mV dec-1 Tafel associated with the Volmer-Tafel HER mechanism. Furthermore, Raman and infrared spectroscopy analysis, as well as scanning electron microscopy (SEM) were carried out to understand the structure of the samples.

N, P-Codoped Graphene Dots Supported on N-Doped 3D Graphene as Metal-Free Catalysts for Oxygen Reduction

Nitrogen and phosphorus-codoped graphene dots supported on nitrogen-doped three-dimensional graphene (N, P-GDs/N-3DG) have been synthesized by a facile freeze-annealing process. On the surface of the 3D interconnected porous structure, the N, P-GDs are uniformly dispersed. The as-prepared N, P-GDs/N-3DG material served as a metal-free catalyst for oxygen reduction reaction (ORR) in an alkaline medium and evaluated by a rotating ring-disk electrode. The N, P-GDs/N-3DG catalyst exhibits excellent ORR activity, which is comparable to that of the commercial Pt/C catalyst. Furthermore, it exhibits a higher tolerance to methanol and better stability than the Pt/C. This enhanced electrochemical catalytic performance can be ascribed to the presence of abundant functional groups and edge defects. This study indicates that P-N bonded structures play a vital role as the active sites in ORR.

Universal Method to Fabricate Transition Metal Single-Atom-Anchored Carbon with Excellent Oxygen Reduction Reaction Activity

Single-atom catalysts (SACs) have attracted great attention due to their high atom-utilization and catalytic efficiency. However, a universal synthetic route is still lacking, which restricts the SAC-related investigation and application. Here, we report a simple and cost-effective method to fabricate transition metal SACs through ion exchange and annealing procedures. Benefiting from the "egg-box" structure property of alginate, the metal ion can be effectively anchored into the organic center. Using CuCl₂ as a representative transition metal ion, the Cu SAC structure was synthesized and identified by aberration-corrected high-angle annular dark-field scanning transmission electron microscopy and X-ray absorption fine structure spectroscopy. Through optimizing CuCl₂ concentration, the obtained Cu SAC exhibited a good oxygen reduction reaction activity, whose onset potential, half wave potential, and limiting current density are all comparable to those of 20 wt % Pt/C. Cu-N₄ was identified as the responsible catalytic site. More importantly, other transition metal SACs can be easily synthesized via altering metallic solution, which proves the universality of our proposed method. This work may be valuable for the cost-effective and universal SAC synthetic method development.

Cobalt and nitrogen codoped carbon nanotubes derived from a graphitic C3N4 template as an electrocatalyst for the oxygen reduction reaction

Sluggish oxygen reduction reaction kinetics have been a main obstacle for commercial application of fuel cells. To replace Pt-based noble metal electrocatalysts, it is crucial to develop economical materials as electrocatalysts. Herein, we provide a strategy to prepare Co and N codoped carbon nanotubes for efficient oxygen reduction reaction. The composites are synthesized by hydrothermal reaction followed by calcination at 900 °C. Graphitic carbon nitride is used as a template and nitrogen source, and citric acid and cobalt nitrate hexahydrate are used as carbon and cobalt sources, respectively. Due to the synergistic effect of Co and N codoping and increased specific surface area, the resulting Co and N codoped carbon nanotubes exhibit excellent catalytic performance. The present results provide experimental support for further development of electrocatalysts.

A NiFe layered double hydroxide-decorated N-doped entangled-graphene framework: a robust water oxidation electrocatalyst

Three dimensional (3D) porous carbon materials are highly desirable for electrochemical applications owing to their high surface area and porosity. Uniformly distributed porosity in the 3D architecture of carbon support materials allows reactant molecules to access more electrochemically active centres and simultaneously facilitate removal of the product formed during electrochemical reactions. Herein, we have prepared a nitrogen-doped entangled graphene framework (NEGF), decorated with NiFe-LDH nanostructures by an in situ solvothermal method followed by freeze-drying at high vacuum pressure and low temperature. The freeze-drying method helped to prevent the restacking of the graphene sheets and the formation of a high surface area nitrogen-doped entangled graphene framework (NEGF) supported NiFe-LDHs. The incorporation of the NEGF has significantly reduced the overpotential for the electrochemical oxygen evolution reaction (OER) in 1 M KOH solution. This corresponds to an overpotential reduction from 340 mV for NiFe-LDHs to 290 mV for NiFe-LDH/NEGF to reach the benchmark current density of 10 mA cm^-2. The preparation of the catalyst is conceived through a low-temperature scalable process.

Controlled Synthesis of Co@N-Doped Carbon by Pyrolysis of ZIF with 2-Aminobenzimidazole Ligand for Enhancing Oxygen Reduction Reaction and the Application in Zn-Air Battery

The Co/N-doped carbon material, as an important electrocatalytic material, has been attracted intense interest in ORR and Zn-air battery. Here, we report an efficient Co@N-doped carbon catalyst (Co@N-C-1) obtained by pyrolysis of ZIF precursor with 2-aminobenzimidazole. The introduction of 2-aminobenzimidazole results in the formation of hierarchical meso/microporous structure of the as-prepared Co@N-C-1, effectively avoiding the aggregation of Co nanoparticles during pyrolysis and the higher N content, which contributes to enhance the ORR electrocatalytic activities. The obtained Co@N-C-1 exhibits remarkable ORR performance with a half-wave potential of 0.938 V vs RHE in alkaline media. As the air catalyst of zinc-air batteries, Co@N-C-1 displays 1.439 V of open-circuit voltage and 1413.3 Wh·kg^-1 of energy density.

Turning on electrocatalytic oxygen reduction by creating robust Fe-Nx species in hollow carbon frameworks via in situ growth of Fe doped ZIFs on g-C3N4

Iron-nitrogen-carbon (Fe-N-C) electrocatalysts have been demonstrated to be promising candidates to substitute conventional Pt/C electrocatalysts in the oxygen reduction reaction (ORR) due to the benefits of high efficiency and affordable price. Unfortunately, Fe is prone to aggregation upon high-temperature treatment, which may cover the active sites of the Fe-Nx species and further affect the ORR performance. Thus, the key issue is to avoid Fe aggregation and keep it uniformly dispersed as much as possible. In this work, Fe-N-C catalysts with robust Fe-Nx species in hollow carbon frameworks were created via in situ growth of Fe doped Zn based zeolitic imidazolate frameworks (ZIFs) on g-C3N4 with the subsequent pyrolysis treatment. The developed catalysts demonstrate superb ORR activity, high resistance to methanol and ultralong stability as compared with traditional Pt/C catalysts in alkaline solution. The brilliant performance benefits from the firm connection and robust structure of the optimal Fe-Nx species that are homogeneously dispersed in the hollow carbon frameworks. This work presents a facile and reasonable strategy for the development of excellent ORR electrocatalysts.

Hierarchical NiMoO4@Co3V2O8 hybrid nanorod/nanosphere clusters as advanced electrodes for high-performance electrochemical energy storage

Herein, a synergistic strategy to construct hierarchical NiMoO₄@Co₃V₂O₈ (denoted as NMO@CVO) hybrid nanorod/nanosphere clusters is proposed for the first time, where Co₃V₂O₈ nanospheres (denoted as CVO) have been uniformly immobilized on the surface of the NiMoO₄ nanorods (denoted as NMO) via a facile two-step hydrothermal method. Due to the surface recombination effect between NMO and CVO, the as-prepared NMO@CVO effectively avoids the aggregation of CVO nanosphere clusters. The unique hybrid architecture can make the most of the large interfacial area and abundant active sites for storing charge, which is greatly beneficial for the rapid diffusion of electrolyte ions and fast electron transport. The optimized NMO@CVO-8 composite nanostructure displays battery-like behavior with a maximum specific capacity of 357 C g^-1, excellent rate capability (77.8% retention with the current density increasing by 10 times) and remarkable cycling stability. In addition, an aqueous asymmetric energy storage device is assembled based on the NMO@CVO-8 hybrid nanorod/nanosphere clusters and activated carbon. The device shows an ultrahigh energy density of 48.5 W h kg^-1 at a power density of 839.1 W kg^-1, good rate capability (20.9 W h kg^-1 even at 7833.7 W kg^-1) and excellent cycling stability (83.5% capacitance retention after 5000 cycles). More notably, two charged devices in series can light up a red light-emitting diode (LED) for 20 min, demonstrating its potential in future energy storage applications. This work indicates that the hierarchical NiMoO₄@Co₃V₂O₈-8 hybrid nanorod/nanosphere clusters are promising energy storage materials for future practical applications and also provides a rational strategy for fabricating novel nanostructured materials for high-performance energy storage.

Porous nickel electrodes with controlled texture for the hydrogen evolution reaction and sodium borohydride electrooxidation

Porous Ni electrodes with different textures were successfully fabricated by electrodeposition in the presence of NH₄Cl and (NH₄)₂SO₄. Moreover, we studied the effect of texture on porous nickel electrodes for HER and NaBH₄ electrooxidation.

Fluorine-enriched mesoporous carbon as efficient oxygen reduction catalyst: understanding the defects in porous matrix and fuel cell applications

Herein, fluorine enrichment in mesoporous carbon (F-MC) was explored to introduce maximum charge polarization in the porous matrix, which is beneficial for the preferential orientation of O2 molecules and their subsequent reduction. Ex situ doping of F to porous carbon derived from phloroglucinol-formaldehyde resin using Pluronic F-127 as a structure-directing agent is standardized. The optimized F-MC catalyst exhibited excellent electrocatalytic activity towards the oxygen reduction reaction (ORR) in alkaline media (0.1 M KOH) with an onset potential of -0.10 V vs. SCE and diffusion-limiting current of 4.87 mA cm-2, while displaying only about 50 mV overpotential in the half-wave region compared to Pt-C (40 wt%). In the stability test, the catalyst showed only 10 mV negative shift in its half-wave potential after 10 000 potential cycles. The rotating ring disk electrode (RRDE) experiments revealed that F-MC follows the most preferable 4e - pathway (n = 3.61) with a moderate peroxide (HO2 -) yield. This was further supported by density functional theory calculations and also deeply explains the existence of defects being beneficial for the ORR. The F-MC catalyst owing to its promising ORR activity and long-term electrochemical stability can be viewed as a potential alternative ORR catalyst for anion exchange membrane fuel cell applications.

Graphite N-C-P dominated three-dimensional nitrogen and phosphorus co-doped holey graphene foams as high-efficiency electrocatalysts for Zn-air batteries

The search for metal-free catalysts for oxygen reduction reactions (ORRs) in energy storage and conversion devices, such as fuel cells and metal-air batteries, is highly desirable but challenging. Here, we have designed and synthesized controllable 3D nitrogen and phosphorous co-doped holey graphene foams (N,P-HGFs) as a high-efficiency ORR catalyst through structural regulation and electronic engineering. The obtained catalyst shows a half-wave potential of 0.865 V in alkaline electrolytes. It is found that Zn-air batteries with the N,P-HGFs-1000 air electrode exhibit excellent discharge performance and durability. Our study suggests that the remarkable ORR performance of N,P co-doped graphene is mainly due to the graphite N-C-P structure, where an enhanced charge density and increased HOMO energy level are confirmed by both experimental results and theoretical density-functional theory calculations.

Synthesis of Bimetallic Conductive 2D Metal-Organic Framework (Cox Niy -CAT) and Its Mass Production: Enhanced Electrochemical Oxygen Reduction Activity

The development of new electrocatalysts for electrochemical oxygen reduction to replace expensive and rare platinum-based catalysts is an important issue in energy storage and conversion research. In this context, conductive and porous metal-organic frameworks (MOFs) are considered promising materials for the oxygen reduction reaction (ORR) due to not only their high surface area and well-developed pores but also versatile structural features and chemical compositions. Herein, the preparation of bimetallic conductive 2D MOFs (Co_x Ni_y -CATs) are reported for use as catalysts in the ORR. The ratio of the two metal ions (Co²⁺ and Ni²⁺ ) in the bimetallic Co_x Ni_y -CATs is rationally controlled to determine the optimal composition of Co_x Ni_y -CAT for efficient performance in the ORR. Indeed, bimetallic MOFs display enhanced ORR activity compared to their monometallic counterparts (Co-CAT or Ni-CAT). During the ORR, bimetallic Co_x Ni_y -CATs retain an advantageous characteristic of Co-CAT in relation to its high diffusion-limiting current density, as well as a key advantage of Ni-CAT in relation to its high onset potential. Moreover, the ORR-active bimetallic Co_x Ni_y -CAT with excellent ORR activity is prepared at a large scale via a convenient method using a ball-mill reactor.

Synthesis of Hydrogen-Substituted Graphyne Film for Lithium-Sulfur Battery Applications

Graphyne (GY) is a new type of carbon allotrope, which is viewed as a rapidly rising star in the carbon family referred to as 2D carbon allotropes due to its extraordinary properties. Considering the dynamic nature of the alkyne metathesis reaction, a hydrogen-substituted graphyne (HsGY) film is successfully synthesized on a gas/liquid interface using 1,3,5-tripynylbenzene (TPB) as the precursor. The synthesized HsGY film is used as a sulfur host matrix to be applied in lithium-sulfur batteries (LSBs). The HsGY@S electrode is prepared using S₈ as sulfur source and presents excellent electrochemical performance.

High-level nitrogen-doped, micro/mesoporous carbon as an efficient metal-free electrocatalyst for the oxygen reduction reaction: optimizing the reaction surface area by a solvent-free mechanochemical method

Acting as an efficient metal-free ORR electrocatalyst, nitrogen-doped porous carbon derived from coconut mesocarp was prepared by a solvent-free ball-milling process.

Enriched graphitic N in nitrogen-doped graphene as a superior metal-free electrocatalyst for the oxygen reduction reaction

The active center of N-G catalysts for ORR is confirmed to be related to the graphitic N, and the total N content in N-G catalysts is not the key factors to determine the ORR activity.