Ag3PO4@UMOFNs Core-Shell Structure: Two-Dimensional MOFs Promoted Photoinduced Charge Separation and Photocatalysis

Tailoring van der Waals interactions in ultra-thin two dimensional metal-organic frameworks (MOFs) for photoconductive applications

The diverse structural tunability of 2-dimensional π-stacked layered metal-organic frameworks (2D MOFs) enables the control of charge carrier mobility to achieve specific photoconductive characteristics. This study demonstrates the potential of various theoretical methodologies and frameworks in establishing a correlation between structure and functionality for such purposes. Through a focus on the archetypal Ni3(HITP)2 2D MOF, we examine the impact of quantum confinement and stacking fault defects on the absorption spectra using our recently-developed Frenkel-Holstein Hamiltonian. Specifically, the relationship between optical properties and number of layer units along the π-stacking direction is discussed. We employ Marcus rate theory to evaluate vertical carrier mobility subject to inter-layer proximity and different crystal packing which affect van der Waals interactions between layers. The insights presented in this research can inform the development of guidelines for enhancing photoconductive properties in 2D MOF nanosheets.

Poor/rich dual electron reaction centers promoting photo-Fenton synergistic removal of organic pollutants: Graphite carbon-modified copper ferrite

Controlling high recombination of photogenerated carriers and optimizing low cycling of metal valence states are the two key control steps in enhancing photo-Fenton oxidation. To achieve multiscale synergy of photo-Fenton degradation, graphite carbon-modified copper ferrite composites (C/CFO) with poor/rich dual electron reaction centers were synthesized through direct carbonization of Fe/Cu bimetallic organic frameworks. A novel photo-Fenton catalytic system was constructed by irradiating the Fenton reaction with visible light. The photo-Fenton degradation efficiency of C/CFO for tetracycline (100 mg‧L-1) was 93.69% ± 0.02%, and the degradation rate constant was 4.84 times higher than that of the control. Optimized preparation and catalytic conditions, ensured good cyclic stability and broad applicability of C/CFO. This excellent stability performance improvement can be attributed to the following main factors: (1) The introduction of graphite carbon not only increases the specific surface area of C/CFO, but also acts as a bridge between the dual electron reaction centers, facilitating the transfer of photogenerated electrons. (2) On the one hand, the electron-poor reaction centers Fe and Cu capture photogenerated electrons, accelerate the Fenton reaction, and realize the valence cycling of Fe and Cu. On the other hand, the electron-rich reaction centers (oxygen vacancies) act as active sites for H2O2 adsorption, which greatly accelerate the decomposition of H2O2. Overall, the synergy of dual electron reaction centers effectively promoted photo-Fenton oxidation.

Designing and synthesis of perovskite nanocrystals: a promising wide-spectrum solar light-responsive photocatalyst and lead ion sensor

Perovskites are an emerging material with a variety of applications, ranging from their solar light conversion capability to their sensing efficiency. In current study, perovskite nanocrystals (PNCs) were designed using theoretical density functional theory (DFT) analysis. Moreover, the theoretically designed PNCs were fabricated and confirmed by various characterization techniques. The calculated optical bandgap from UV-Vis and fluorescence spectra were 2.15 and 2.05 eV, respectively. The average crystallite size of PNCs calculated from Scherrer equation was 15.18 nm, and point of zero charge (PZC) was obtained at pH 8. The maximum eosin B (EB) removal efficiency by PNCs was 99.56% at optimized conditions following first-order kinetics with 0.98 R2 value. The goodness of the response surface methodology (RSM) model was confirmed from analysis of variance (ANOVA), with the experimental F value (named after Ronald Fisher) of 194.66 being greater than the critical F value F0.05, 14, 14 = 2.48 and a lack of fit value of 0.0587. The Stern-Volmer equation with a larger Ksv value of 1.303710 × 10 6 for Pb2+ suggests its greater sensitivity for Pb2+ among the different metals tested.

The use of bimetallic metal-organic frameworks as restoration materials for pollutants removal from water environment

Bimetallic metal-organic frameworks (BMOFs) are a class of functional porous materials constructed by coordination between nodes containing two different metal ions and organic ligands. Studies have shown that the catalytic activity of BMOFs is greatly improved owing to the adjustment of charge distribution and the increase of active sites as well as the synergistic effect between the bimetals, and the advantages of their large specific surface area, high porosity, unique structure and dispersed active centres make them available as important organic materials applied in the field of wastewater treatment. In this review, the preparation and construction methods for BMOFs in recent years are summarized, and we focus on their removal of different types of pollutants in the aqueous environment, including ions, dyes, pharmaceuticals or personal care products, phenolic compounds and microorganisms, as well as their corresponding removal mechanisms. In addition, we provide an outlook on their future opportunities and challenges in wastewater treatment.

Visible Light-Driven Photocatalytic Degradation of Methylene Blue Dye Using a Highly Efficient Mg-Al LDH@g-C3N4@Ag3PO4 Nanocomposite

The issue of water resource pollution resulting from the discharge of dyes is a matter of great concern for the environment. In this investigation, a new ternary heterogeneous Mg-Al LDH@g-C3N4X@Ag3PO4Y (X = wt % of g-C3N4 with respect to Mg-Al layered double hydroxide (LDH) and Y = wt % of Ag3PO4 loaded on Mg-Al LDH@g-C3N430) nanocomposite was prepared with the aim of increasing charge carrier separation and enhancement of photocatalytic performance to degrade methylene blue (MB) dye. The prepared samples were subjected to characterization via Fourier-transform infrared spectroscopy, field emission scanning electron microscopy, energy-dispersive X-ray, transmission electron microscopy, X-ray diffraction, UV-vis diffuse reflectance spectroscopy, photoluminescence, and photoelectrochemical analysis. It was observed that in the presence of the composite of Mg-Al LDH and g-C3N4, the photocatalytic decomposition of MB under 150 W mercury lamp illumination increases significantly as opposed to Mg-Al LDH alone, and the Mg-Al LDH@g-C3N4 level with Ag3PO4 coating causes the complete degradation of MB to occur in less time. The outcomes show that the Mg-Al LDH@g-C3N430@Ag3PO45 nanocomposite demonstrated the highest photodegradation activity (99%). Scavenger tests showed that the two most effective agents in the photodegradation of MB are holes and hydroxyl radicals, respectively. Finally, a type II heterojunction photocatalytic degradation mechanism for MB by Mg-Al LDH@g-C3N430@Ag3PO45 was proposed.

Heterostructured Ag@MOF-801/MIL-88A(Fe) Nanocomposite as a Biocompatible Photocatalyst for Degradation of Reactive Black 5 under Visible Light

Heterostructured Ag@MOF-801/MIL-88A(Fe) nanocomposite was synthesized through template effects in metal-organic frameworks (MOFs). MIL-88A(Fe) was fabricated on a MOF-801 template using the internal extended growth method (IEGM) via polyvinylpyrrolidone (PVP) as the structure-director agent to create the MIL-88A(Fe)-on-MOF-801 heterostructure. The MOF-801/MIL-88A(Fe) heterostructure was used as a template for the formation of Ag nanoparticles (NPs) inside it via a double solvents method (DSM) combined with a photoreduction route (PR). To characterize synthesized samples to a high level of detail, PXRD, FT-IR, EDX, N2 adsorption-desorption isotherms, TEM, DRS, PL, EIS, and Mott-Sckottky measurements were used. The resulting Ag@MOF-801/MIL-88A(Fe) nanocomposite demonstrated the highest photocatalytic activity of 91.72% for the degradation of Reactive Black 5, after 30 min under visible light irradiation.

Surface ligand-assisted synthesis and biomedical applications of metal-organic framework nanocomposites

Metal-organic framework (MOF) nanocomposites have recently gained intensive attention for biosensing and disease therapy applications owing to their outstanding physiochemical properties. However, the direct growth of MOF nanocomposites is usually hindered by the mismatched lattice in the interface between the MOF and other nanocomponents. Surface ligands, molecules with surfactant-like properties, are demonstrated to exhibit the robust capability to modify the interfacial properties of nanomaterials and can be utilized as a powerful strategy for the synthesis of MOF nanocomposites. Besides this, surface ligands also exhibit significant functions in the morphological control and functionalization of MOF nanocomposites, thus greatly enhancing their performance in biomedical applications. In this review, the surface ligand-assisted synthesis and biomedical applications of MOF nanocomposites are comprehensively reviewed. Firstly, the synthesis of MOF nanocomposites is discussed according to the diverse roles of surface ligands. Then, MOF nanocomposites with different properties are listed with their applications in biosensing and disease therapy. Finally, current challenges and further directions of MOF nanocomposites are presented to motivate the development of MOF nanocomposites with elaborate structures, enriched functions, and excellent application prospects.

An electrochemiluminescence immunosensor with double co-reaction accelerators based on Ag3PO4@EuPO4-AgNP for detecting squamous cell carcinoma antigen

This study aimed to design a sandwich electrochemiluminescence (ECL) immunosensor with double co-reaction accelerators for sensitively detecting squamous cell carcinoma antigen (SCCA). First, silver orthophosphate (Ag3PO4) nanoparticles were modified on the surface of EuPO4 nanowires to improve their poor dispersibility/solubility. At the same time, EuPO4 was used as a co-reaction accelerator to catalyze S2O82- to produce more intermediates (SO4•-), significantly enhancing the ECL signal of Ag3PO4. Ag nanoparticles (AgNP) modified on Ag3PO4@EuPO4 composite nanomaterials were used not only as linkers of luminescence groups and biomarkers but also as a co-reaction accelerator to effectively enhance ECL signal. The designed ECL immunosensor displayed several advantages, including good stability and reproducibility. Under the optimal conditions, its linear range in detecting SCCA was 0.0001-50 ng·mL-1, the detection limit was 25 fg·mL-1 (S/N = 3), the recovery was 96.6-100.4%, and the relative standard deviation was less than 4.8%. It was successfully applied to detect SCCA in human serum.

Broccoli-liked silver phosphate nanoparticles supported on green nanofiber membrane for visible-light driven photodegradation towards water pollutants

In view of the practical application, it is imperative to develop efficient, exercisable, and visible light driven water pollution treatment materials. Herein, a high-efficiency green photocatalytic membrane for water pollution treatment is proposed and fabricated conveniently. Firstly, silver phosphate (Ag₃PO₄) nanoparticles with controlled morphology were prepared by simple liquid-phase precipitation method, and then a hierarchical structured Ag₃PO₄@polylactic acid (PLA) composite nanofiber membrane was prepared by electrospinning. Using electrospun PLA nanofiber membrane as a carrier of photocatalysts can significantly improve the dispersion of Ag₃PO₄nanoparticles, and increase the contact probability with pollutants and photocatalytic activity. The prepared PLA@Ag₃PO₄composite membrane was used to degrade methylene blue (MB) and tetracycline hydrochloride (TC) under visible light irradiation. The results showed that the removal ratio of pollutants on Ag₃PO₄@PLA composite nanofiber membrane was 94.0% for MB and 82.0% for TC, demonstrating an outstanding photocatalytic activity of composite membrane. Moreover, the PLA nanofiber membrane is a self-supported and biodegradable matrix. After five cycles, it can still achieve 88.0% of the initial photocatalytic degradation rate towards MB, showing excellent recyclability. Thus, this composite nanofiber membrane is a high-efficiency and environmental-friendly visible light driven water pollution treatment material that could be used in real applications.

Promotion effect of free Ag+ ions on photocatalytic dechlorination processes

Free silver ions (Ag+) in the solution exhibit enhanced photocatalytic dechlorination processes of organic chloride, including 2-chlorophenol, 2,4-dichlorophenol and 2,4,6-trichlorophenol, over PhC2Cu under visible light irradiation.

Enhanced Visible-Light-Driven Hydrogen Production through MOF/MOF Heterojunctions

A strategy for enhancing the photocatalytic performance of MOF-based systems (MOF: metal-organic framework) is developed through the construction of MOF/MOF heterojunctions. The combination of MIL-167 with MIL-125-NH₂ leads to the formation of MIL-167/MIL-125-NH₂ heterojunctions with improved optoelectronic properties and efficient charge separation. MIL-167/MIL-125-NH₂ outperforms its single components MIL-167 and MIL-125-NH₂, in terms of photocatalytic H₂ production (455 versus 0.8 and 51.2 μmol h^-1 g^-1, respectively), under visible-light irradiation, without the use of any cocatalysts. This is attributed to the appropriate band alignment of these MOFs, the enhanced visible-light absorption, and long charge separation within MIL-167/MIL-125-NH₂. Our findings contribute to the discovery of novel MOF-based photocatalytic systems that can harvest solar energy and exhibit high catalytic activities in the absence of cocatalysts.

Highly-efficient and stable photocatalytic activity of lead-free Cs2AgInCl6 double perovskite for organic pollutant degradation

Photocatalytic applications of halide perovskites have attracted increasing attention. However, lack of stability and lead toxicity of lead halide perovskites have hindered their applications. Metal halide double perovskite (DP) Cs₂AgInCl₆ is a stable, environment-friendly semiconductor with direct band gap, and then the best promising alternative to lead halide perovskites. Here, the applications of Cs₂AgInCl₆ DP to photocatalytic degradation of organic pollutants have been developed, in which the octahedral Cs₂AgInCl₆ DP particles (~3.33 eV) were prepared by precipitation from acid solutions. The as-prepared samples exhibit high photocatalytic activity, which can degrade about 98.5% of water-insoluble carcinogen Sudan Red III in only 16 min, and have a good stability for 5 cycle operations. Furthermore, the Cs₂AgInCl₆ DP also can degrade Rhodamine B, Methyl orange and Methyl red efficiently, demonstrating a highly-efficient and stable ethanol solvent-based photocatalytic system for organic pollutants degradation. The high photocatalytic activity could be attributed to direct band gap and long carrier lifetime of Cs₂AgInCl₆ DP. These unique features of Cs₂AgInCl₆ DP indicate that it could have a good application prospect for photocatalytic degradation of organic pollutants.

Semiconducting CuxNi3-x(hexahydroxytriphenylene)2 framework for electrochemical aptasensing of C6 glioma cells and epidermal growth factor receptor

A 2D CuNi metal-organic framework (MOF) named CuxNi3-x(HHTP)2 was synthesized with 2,3,6,7,10,11-hexahydroxytriphenylene (HHTP) as the linker and was used as a sensitive scaffold to adsorb aptamer strands for the electrochemical detection of living C6 glioma cells and one of their biomarkers, epidermal growth factor receptor (EGFR). Different from conventional MOFs, the CuxNi3-x(HHTP)2 MOF comprises long-range delocalized electrons, a graphene-analog nanostructure, multiple metal states (Cu0/Cu+/Cu2+ and Ni2+/Ni3+), and abundant oxygen vacancies. With these features, the CuxNi3-x(HHTP)2 MOF anchored a large amount of C6 cell-targeted aptamer strands via coordination among metal centers, oligonucleotides, π-π stacking, and van der Waals force. The CuxNi3-x(HHTP)2-based cytosensor showed a low limit of detection (LOD) of 21 cells mL-1 toward C6 glioma cells within a wide range from 50 cells mL-1 to 1 × 105 cells mL-1. Moreover, the proposed aptasensor displayed high selectivity, good stability, acceptable reproducibility, and a low LOD of 0.72 fg mL-1 for detecting EGFR with the concentration ranging from 1 fg mL-1 to 1 ng mL-1. The aptasensor based on the CuxNi3-x(HHTP)2 MOF exhibited superior sensing performance over those based on its monometallic analogues such as Cu3(HHTP)2 MOF and Ni3(HHTP)2 MOF. Hence, this sensing strategy based on a bimetallic semiconducting MOF shows great potential for cancer diagnosis.

Novel 2D/2D BiOBr/UMOFNs direct Z-scheme photocatalyst for efficient phenol degradation

A novel 2D/2D BiOBr/ultrathin metal-organic framework nanosheets (UMOFNs) direct Z-scheme photocatalyst was successfully synthesized by using a simple deposition-precipitation method. The photocatalytic performance was evaluated under light irradiation, which revealed that the 2D/2D BiOBr/UMOFNs Z-scheme photocatalyst exhibits higher photocatalytic degradation of phenol compared to pristine BiOBr and UMOFNs. A BiOBr/UMOFNs-40% (mass ratio for BiOBr and UMOFNs of 1:0.4) photocatalyst was found to show the best photocatalytic degradation efficiency and stability, reaching 99% phenol degradation under light irradiation of 270 min and maintaining 97% degradation after 5 recycling runs. Results obtained from a trapping experiment and electron paramagnetic resonance suggest that reactive ·OH and O₂ ^·- play a major role in phenol degradation. Photoluminescence and photocurrent results reveal that the excellent photocatalytic activity of the 2D/2D BiOBr/UMOFNs photocatalyst can be ascribed to the efficient separation of photogenerated electron-hole pairs through a direct Z-scheme system. This article provides a possible reference for designing Z-scheme photocatalysts by using MOFs and semiconductors for practical organic pollutant treatment.

Recent advances in the removal of persistent organic pollutants (POPs) using multifunctional materials:a review

Persistent organic pollutants (POPs) have gained heightened attentions in recent years owing to their persistent property and hazard influence on wild life and human beings. Removal of POPs using varieties of multifunctional materials have shown a promising prospect compared with conventional treatments. Herein, three main categories, including thermal degradation, electrochemical remediation, as well as photocatalytic degradation with the use of diverse catalytic materials, especially the recently developed prominent ones were comprehensively reviewed. Kinetic analysis and underlying mechanism for various POPs degradation processes were addressed in detail. The review also systematically documented how catalytic performance was dramatically affected by the nature of the material itself, the structure of target pollutants, reaction conditions and treatment techniques. Moreover, the future challenges and prospects of POPs degradation by means of multiple multifunctional materials were outlined accordingly. Knowing this is of immense significance to enhance our understanding of POPs remediation procedures and promote the development of novel multifunctional materials.

Dual-functional Ag3PO4@palygorskite composite for efficient photodegradation of alkane by in situ forming Pickering emulsion photocatalytic system

Removal of oil from water is highly imperative, because of the worldwide oil-contaminated water caused by industrial development and oil spill accidents. As a solution to meet the demand for clean energy technology, photocatalysis has drawn great attention recently. However, a major problem encountered in photodegrading oil is the difficult availability of oil by photocatalyst. To overcome this problem, a novel concept of integrating Pickering emulsification of palygorskite (PAL) clay particles with photocatalytic activity of Ag₃PO₄ is proposed in this work. By a simple co-precipitation method, Ag₃PO₄@PAL composite was prepared and used for the simultaneous emulsification and decomposition of tetradecane. Via a simple Pickering emulsion-based photocatalytic system, Ag₃PO₄ could contact with tetradecane directly, which effectively overcomes the agglomeration and settlement of Ag₃PO₄ in aqueous phase. This in situ photocatalytic system shows a higher efficiency for photodegradation of tetradecane, comparing with traditional solution-dispersed photocatalytic system. Under visible-light irradiation, the removal efficiency of tetradecane is 4.9 times higher than Ag₃PO₄ alone. Direct contact of Ag₃PO₄ with oil pollutes and sufficiently large active surface area greatly improve the efficiency of photodegrading oil. This study provides a new and simple strategy for oil photodegradation via an in situ Pickering emulsion system.

Recent advances in MOF-based photocatalysis: environmental remediation under visible light

Highly photoactive MOFs can be engineered via various strategies for the purpose of extended visible light absorption, more efficient generation, separation and transfer of charge carriers, as well as good recyclability.

The synergistic effect of Co/Ni in ultrathin metal–organic framework nanosheets for the prominent optimization of non-enzymatic electrochemical glucose detection

Co–Ni ultrathin metal organic framework nanosheets exhibited extremely high sensitivity, wide linear range, low detection limit and excellent selectivity as a glucose sensing electrode material.

3D Bombax-structured carbon nanotube sponge coupling with Ag3PO4 for tetracycline degradation under ultrasound and visible light irradiation

A novel photocatalytic carbon nanotube sponge with three-dimensional Bombax-structure was fabricated by a facile chemical vapor deposition followed by in situ ion-exchange approach. The as-prepared sponge achieved both high-efficiency adsorption and photocatalysis towards antibiotics, which can remove up to 90% of tetracycline within an hour. The morphology and mechanism of the photocatalytic CNT sponge were explored by multiple measures. Results show the functional groups and high specific surface area of CNT sponge play vital roles in preparing this Bombax-structured Ag₃PO₄/CNT sponge, the band gap of which can be tuned by varying the ration between Ag₃PO₄ and CNT. The photodegradation experiments of tetracycline with the assistance of ultrasound irradiation were performed, Ag₃PO₄/CNT sponge exhibits preferable photocatalytic activity, which can be attributed to both the enhancement of specific surface area of Ag₃PO₄ and the cavitation effect on CNT surface. The efficiency contributed by ultrasound could account for more than half of the degradation efficiency when the ultrasound power was 100 W. The improvement in transfer efficiency and the delay in charge recombination of Ag₃PO₄/CNT sponge were further verified by Electrochemical impedance spectra (EIS) and Photoluminescence tests (PL). Reactive free-radical species were detected by the Electron Spin Resonance (ESR). The intermediates and possible pathway were analyzed by gas chromatography-mass spectrometer (GC-MS) technique.

Tetrahedral UMOFNs/Ag3PO4 Core-Shell Photocatalysts for Enhanced Photocatalytic Activity under Visible Light

A new visible-light-responsive tetrahedral ultrathin metal-organic framework nanosheet (UMOFNs)/Ag₃PO₄ composite photocatalyst with a core-shell structure was readily synthesized by sonication in an organic solvent. Characterization methods for the photocatalyst included X-ray diffraction (XRD), scanning electron microscopy, transmission electron microscopy, and UV-vis diffuse reflectance spectroscopy. The XRD patterns of the composite photocatalyst before and after visible-light irradiation demonstrated that trace amounts of Ag ions in the composite photocatalyst easily transformed into Ag nanoparticles, which play a role in promoting charge separation at the interface of a heterojunction. The UMOFNs/Ag₃PO₄ composite photocatalyst showed higher photocatalytic activity for the photodegradation of 2-chlorophenol (2-CP) under visible-light irradiation (>420 nm) than Ag₃PO₄. The complete degradation of 2-CP was achieved in 7 min using the tetrahedral UMOFNs/Ag₃PO₄ core-shell photocatalyst, and the apparent reaction rate was approximately 26 times higher than that of pure Ag₃PO₄. Further, a scavenger experiment showed h⁺ and O₂ ^•- were the major reactive species involved in the photocatalytic reaction system. This enhanced photocatalytic activity results from the efficient separation of photoinduced electron-hole pairs and the increase of interface area between Ag₃PO₄, UMOFNs, and the Ag nanoparticles.

Tuning the Supramolecular Structures of Metal-Free Porphyrin via Surfactant Assisted Self-Assembly to Enhance Photocatalytic Performance

Metal-free porphyrin with good planarity is beneficial to π-π stack interactions, which promotes electron coupling and the separation and transfer of photogenerated carriers. It is necessary to develop metal-free porphyrin-based photocatalysts and exploit the photocatalytic mechanism. Herein, metal-free porphyrin (5,10,15,20-tetrakis(4-carboxyphenyl)porphyrin, TCPP) was self-assembled through an acid-based neutralization reaction and mixing dual-solvents under surfactants to form different aggregates. Morphology structures, optical and optoelectronic properties of the TCPP aggregates were characterized in detail. TCPP self-assemblies showed higher photocatalytic activities for the degradation of phenol under visible light than untreated TCPP powders, and the aggregates of nanorods formed through the acid-based neutralization reaction in the presence of hexadecyl trimethyl ammonium bromide (CTAB) possessed 2.6 times more activity than the nanofiber aggregates formed through mixing dual-solvents. It was proved that self-assembly methods are crucial for controlling the aggregation of porphyrins to form different aggregations, which have a profound impact on the photocatalytic activity.

Bi-metal-organic frameworks type II heterostructures for enhanced photocatalytic styrene oxidation

Fabricating heterostructures enhances the photocatalytic performance of metal-organic frameworks (MOFs) due to their excellent light absorption and high efficient charge transfer capacity. In this study, we designed and implemented three-dimensional dendritic UiO-66-NH2@MIL-101(Fe) (UOML) heterostructures as catalysts for photocatalytic styrene oxidation. The UOML catalysts exhibited a well-matched band gap structure and efficient catalytic interface, leading to a remarkable photoexcited carrier separation and catalytic activity. Our results present a promising insight for synthesizing novel MOFs-based catalysts and their applications.

Z-Scheme Photocatalytic CO2 Reduction on a Heterostructure of Oxygen-Defective ZnO/Reduced Graphene Oxide/UiO-66-NH2 under Visible Light

The construction of a Z-scheme heterojunction is an effective way to isolate photogenerated electron-holes and enhance the activity of the semiconductor photocatalysts. However, the Z-scheme heterojunctions based on metal-organic frameworks were rarely reported. Herein, a novel oxygen-defective ZnO (O-ZnO)/reduced graphene oxide (rGO)/UiO-66-NH₂ Z-scheme heterojunction has been prepared by a facile solvothermal route. The morphologies, structures, and photoelectric characteristics of the acquired materials were characterized in detail. The photocatalytic activity of the O-ZnO/rGO/UiO-66-NH₂ heterostructure was assessed by photocatalytic CO₂ reduction. The results indicated that the O-ZnO/rGO/UiO-66-NH₂ heterostructure could efficiently reduce CO₂ to CH₃OH and HCOOH, and its activity was significantly superior to that of O-ZnO/UiO-66-NH₂ and ZnO/rGO/UiO-66-NH₂. Under illumination of visible light, the yield of CH₃OH and HCOOH over the O-ZnO/rGO/UiO-66-NH₂ heterostructure reached 34.83 and 6.41 μmol g^-1 h^-1, respectively. The high photoactivity of the O-ZnO/rGO/UiO-66-NH₂ heterostructure should be caused by the effective spatial separation of photogenerated electrons and holes via a Z-scheme charge transfer. This research may well present an insight into the design and fabrication of novel Z-scheme photocatalytic systems for environmental remediation and energy conversion.