Directional Passive Transport of Microdroplets in Oil-Infused Diverging Channels for Effective Condensate Removal

Single Condensation Droplet Self-Ejection from Divergent Structures with Uniform Wettability

Coalescence-induced condensation droplet jumping has been extensively studied for anti-icing, condensation heat transfer, water harvesting, and self-cleaning. Another phenomenon that is gaining attention for potential enhancements is the self-ejection of individual droplets. However, the mechanism underlying this process remains elusive due to cases in which the abrupt detachment of an interface establishes an initial Laplace pressure difference. In this study, we investigate the self-ejection of individual droplets from uniformly hydrophobic microstructures with divergent geometries. We design, fabricate, and test arrays of truncated, nanostructured, and hydrophobic microcones arranged in a square pattern. High-speed microscopy reveals the dynamics of a single condensation droplet between four cones: after cycles of growth and stopped self-propulsion, the suspended droplet self-ejects without abrupt detachments. Through analytical modeling of the droplet in a conical pore as an approximation, we describe the slow isopressure growth phases and the rapid transients driven by surface energy release once a dynamic configuration is reached. Microcones with uniform wettability, in addition to being easier to fabricate, have the potential to enable the self-ejection of all nucleated droplets with a designed size, promising significant improvements in the aforementioned applications and others.

Biomimetic on-chip filtration enabled by direct micro-3D printing on membrane

Membrane-on-chip is of growing interest in a wide variety of high-throughput environmental and water research. Advances in membrane technology continuously provide novel materials and multi-functional structures. Yet, the incorporation of membrane into microfluidic devices remains challenging, thus limiting its versatile utilization. Herein, via micro-stereolithography 3D printing, we propose and fabricate a "fish gill" structure-integrated on-chip membrane device, which has the self-sealing attribute at structure-membrane interface without extra assembling. As a demonstration, metallic micromesh and polymeric membrane can also be easily embedded in 3D printed on-chip device to achieve anti-fouling and anti-clogging functionality for wastewater filtration. As evidenced from in-situ visualization of structure-fluid-foulant interactions during filtration process, the proposed approach successfully adopts the fish feeding mechanism, being able to "ricochet" foulant particles or droplets through hydrodynamic manipulation. When benchmarked with two common wastewater treatment scenarios, such as plastic micro-particles and emulsified oil droplets, our biomimetic filtration devices exhibit 2 ~ 3 times longer durability for high-flux filtration than devices with commercial membrane. This proposed 3D printing-on-membrane approach, elegantly bridging the fields of microfluidics and membrane science, is instrumental to many other applications in energy, sensing, analytical chemistry and biomedical engineering.

Bioinspired functional SLIPSs and wettability gradient surfaces and their synergistic cooperation and opportunities for enhanced condensate and fluid transport

Bioinspired smart functional surfaces have received increasing attention in recent years owed to their tunable wettability and enhanced droplet transport suggesting them as excellent candidates for industrial and nanotechnology-related applications. More specifically, bioinspired slippery lubricant infused porous surfaces (SLIPSs) have been proposed for their low adhesion enabling continuous dropwise condensation (DWC) even of low-surface tension fluids. In addition, functional surfaces with chemical and/or structural wettability gradients have also been exploited empowering spontaneous droplet transport in a controlled manner. Current research has focused on the better understanding of the mechanisms and intimate interactions taking place between liquid droplets and functional surfaces or on the forces imposed by differences in surface wettability and/or by Laplace pressure owed to chemical or structural gradients. Nonetheless, less attention has been paid to the synergistic cooperation of efficiently driving droplet transport via chemical and/or structural patterns/gradients on a low surface energy/adhesion background imposed by SLIPSs, with the consequent promising potential for microfluidics and condensation heat transfer applications amongst others. This review provides a detailed and timely overview and summary on recent advances and developments on bioinspired SLIPSs and on wettability gradient surfaces with focus on their synergistic cooperation for condensation and fluid transport related applications. Firstly, the fundamental theory and mechanisms governing complex droplet transport on homogeneous, on wettability gradient surfaces and on inclined SLIPSs are introduced. Secondly, recent advances on the fabrication and characterization of SLIPSs and functional surfaces are presented. Then, the condensation performance on such functional surfaces comprising chemical or structural wettability gradients is reviewed and their applications on condensation heat transfer are summarized. Last a summary outlook highlighting the opportunities and challenges on the synergistic cooperation of SLIPSs and wettability gradient surfaces for heat transfer as well as future perspective in modern applications are presented.

Rapid and Persistent Suction Condensation on Hydrophilic Surfaces for High-Efficiency Water Collection

Water collection by dew condensation emerges as a sustainable solution to water scarcity. However, the transient condensation process that involves droplet nucleation, growth, and transport imposes conflicting requirements on surface properties. It is challenging to satisfy all benefits for different condensation stages simultaneously. By mimicking the structures and functions of moss Rhacocarpus, here, we report the attainment of dropwise condensation for efficient water collection even on a hydrophilic surface gated by a liquid suction mechanism. The Rhacocarpus-inspired porous surface (RIPS), which possesses a three-level wettability gradient, facilitates a rapid, directional, and persistent droplet suction. Such suction condensation enables a low nucleation barrier, frequent surface refreshing, and well-defined maximum droplet shedding radius simultaneously. Thus, a maximum ∼160% enhancement in water collection performance compared to the hydrophobic surface is achieved. Our work provides new insights and a design route for developing engineered materials for a wide range of water-harvesting and phase-change heat-transfer applications.

Laplace Pressure Driven Single-Droplet Jumping on Structured Surfaces

Droplet transport on, and shedding from, surfaces is ubiquitous in nature and is a key phenomenon governing applications including biofluidics, self-cleaning, anti-icing, water harvesting, and electronics thermal management. Conventional methods to achieve spontaneous droplet shedding enabled by surface-droplet interactions suffer from low droplet transport velocities and energy conversion efficiencies. Here, by spatially confining the growing droplet and enabling relaxation via rationally designed grooves, we achieve single-droplet jumping of micrometer and millimeter droplets with dimensionless jumping velocities v* approaching 0.95, significantly higher than conventional passive approaches such as coalescence-induced droplet jumping (v* ≈ 0.2-0.3). The mechanisms governing single-droplet jumping are elucidated through the study of groove geometry and local pinning, providing guidelines for optimized surface design. We show that rational design of grooves enables flexible control of droplet-jumping velocity, direction, and size via tailoring of local pinning and Laplace pressure differences. We successfully exploit this previously unobserved mechanism as a means for rapid removal of droplets during steam condensation. Our study demonstrates a passive method for fast, efficient, directional, and surface-pinning-tolerant transport and shedding of droplets having micrometer to millimeter length scales.

Empowering microfluidics by micro-3D printing and solution-based mineral coating

Fluid-solid interaction in porous materials is of tremendous importance to earth, space, energy, environment, biological, and medical applications. High-resolution 3D printing enables efficient fabrication of porous microfluidic devices with complicated pore-throat morphology, but lacking desired surface functionality. In this work, we propose a novel approach to additively fabricate functional porous devices by integrating micro-3D printing and solution-based internal coating. This approach is successfully applied to create energy/environment-orientated porous micromodels that replicate the μCT-captured porous geometry and natural mineralogy of carbonate rock. The functional mineral coating in a 3D-printed porous scaffold is achieved by seeding calcite nanoparticles along the inner surface and enabling in situ growth of calcite crystals. For conformal and stable coating in confined pore spaces, we manage to control the wetting and capillarity effects during fabrication: (i) capillarity-enhanced nanoparticle immobilization for forming an adhered seeding layer; (ii) capillary pore-throat blockage mitigation for uniform crystal growth. These transparent micromodels are then used to directly image and characterize microscopic fluid dynamics including wettability-dependent fluid propagation and capillarity-held phase transition processes. The proposed approach can be readily tailored with on-demand-designed scaffold geometry and appropriate coating recipe to fit in many other emerging applications.

Condensation of Satellite Droplets on Lubricant-Cloaked Droplets

Condensation on lubricant-infused micro- or nanotextured superhydrophobic surfaces exhibits remarkable heat transfer performance owing to the high condensation nucleation density and efficient condensate droplet removal. When a low surface tension lubricant is used, it can spread on the condensed droplet and "cloak" it. Here, we describe a previously unobserved condensation phenomenon of satellite droplet formation on lubricant-cloaked water droplets using environmental scanning electron microscopy. The presence of satellite droplets confirms the cloaking behavior of common lubricants on water such as Krytox oils. More interestingly, we have observed satellite droplets on BMIm ionic liquid-infused surfaces, which is unexpected because BMIm was used in previous reports as a lubricant to eliminate cloaking during water condensation. Our studies reveal that the cloaking of BMIm on water droplets is theoretically favorable due to the fast timescale spreading during initial condensation when compared to the long timescale required for dissolution of the lubricant in water. We utilize a novel characterization approach based on Raman spectroscopy to confirm the existence of cloaking lubricant films on water droplets residing on lubricant-infused surfaces. The selected lubricants include Krytox oil, ionic liquid, and dodecane, which have drastically different surface tensions and polarities. In addition, spreading dynamics of cloaking and noncloaking lubricants on water droplets show that ionic liquid has the capability to mobilize water droplets spontaneously owing to cloaking and its relatively high surface tension. Our studies not only elucidate the physics governing cloaking and satellite droplet condensation phenomena at micro- and macroscales but also reveal a subset of previously unobserved lubricant-water interfacial interactions for a large variety of applications.

Imaging and characterizing fluid invasion in micro-3D printed porous devices with variable surface wettability

Fluid invasion in porous media widely exists in many applications, such as waterflooded oil/gas recovery, carbon geo-sequestration, water filtration and membrane distillation. The invasion dynamics is significantly affected by the surface wettability, interfacial tension, pore-throat topology and many other parameters. In this work, we experimentally investigate the effect of surface wettability on the multiphase flow behavior, particularly the interfacial dynamics, through direct visualization of fluid invasion in a porous microfluidic device (micromodel). The micromodels have been fabricated by using a micro-stereolithography 3D printer with acrylate-based resins. With a high printing resolution of up to 2 μm, these micromodels successfully mimic the complex pore-throat features of natural porous media (i.e. rocks) based on their thin-section or micro-CT images. Moreover, the transparency of the as-printed micromodel also enables microfluidic flow imaging. By injecting different fluids into surface-modified micromodels, we observe and study the invasion dynamics, including the lateral interfacial curvature, multiphase flow path and fluid trapping behavior, under various surface wettability conditions. By combining optical flow imaging and numerical simulation, we have systematically analyzed the wettability-dependent residue distribution and revealed four different types of trapping mechanisms. This work offers a novel methodology to study microscale flow in porous media with micro-3D printing and multiphase flow imaging.

Self-Sustained Cascading Coalescence in Surface Condensation

Sustained dropwise condensation of water requires rapid shedding of condensed droplets from the surface. Here, we elucidate a microfluidic mechanism that spontaneously sweeps condensed microscale droplets without the need for the traditional droplet removal pathways such as use of superhydrophobicity for droplet rolling and jumping and utilization of wettability gradients for directional droplet transport among others. The mechanism involves self-generated, directional, cascading coalescence sequences of condensed microscale droplets along standard hydrophobic microgrooves. Each sequence appears like a spontaneous zipping process, can sweep droplets along the microgroove at speeds of up to ∼1 m/s, and can extend for lengths more than 100 times the microgroove width. We investigate this phenomenon through high-speed in situ microscale condensation observations and demonstrate that it is enabled by rapid oscillations of a condensate meniscus formed locally in a filled microgroove and pinned on its edges. Such oscillations are in turn spontaneously initiated by coalescence of an individual droplet growing on the ridge with the microgroove meniscus. We quantify the coalescence cascades by characterizing the size distribution of the swept droplets and propose a simple analytical model to explain the results. We also demonstrate that, as condensation proceeds on the hydrophobic microgrooved surface, the coalescence cascades recur spontaneously through repetitive dewetting of the microgrooves. Lastly, we identify surface design rules for consistent realization of the cascades. The hydrophobic microgrooved textures required for the activation of this mechanism can be realized through conventional, scalable surface fabrication methods on a broad range of materials (we demonstrate with aluminum and silicon), thus promising direct application in a host of phase-change processes.

Hierarchical Condensation

With the recent advances in surface fabrication technologies, condensation heat transfer has seen a renaissance. Hydrophobic and superhydrophobic surfaces have all been employed as a means to enhance condensate shedding, enabling micrometric droplet departure length scales. One of the main bottlenecks for achieving higher condensation efficiencies is the difficulty of shedding sub-10 μm droplets due to the increasing role played by surface adhesion and viscous limitations at nanometric length scales. To enable ultraefficient droplet shedding, we demonstrate hierarchical condensation on rationally designed copper oxide microhill structures covered with nanoscale features that enable large (∼100 μm) condensate droplets on top of the microstructures to coexist with smaller (<1 μm) droplets beneath. We use high-speed optical microscopy and focal plane shift imaging to show that hierarchical condensation is capable of efficiently removing sub-10-μm condensate droplets via both coalescence and divergent-track-assisted droplet self-transport toward the large suspended Cassie-Baxter (CB) state droplets, which eventually shed via classical gravitational shedding and thereby avoid vapor side limitations encountered with droplet jumping. Interestingly, experimental growth rate analysis showed that the presence of large CB droplets accelerates individual underlying droplet growth by ∼21% when compared to identically sized droplets not residing beneath CB droplets. Furthermore, the steady droplet shedding mechanism shifted the droplet size distribution toward smaller sizes, with ∼70% of observable underlying droplets having radii of ≤5 μm compared to ∼30% for droplets growing without shading. To elucidate the overall heat transfer performance, an analytical model was developed to show hierarchical condensation has the potential to break the limits of minimum droplet departure size governed by finite surface adhesion and viscous effects through the tailoring of structure length scale, coalescence, and self-transport. More importantly, abrasive wear tests showed that hierarchical condensation has good durability against mechanical damage to the surface. Our study not only demonstrates the potential of hierarchical condensation as a means to break the limitations of droplet jumping, it develops rational design guidelines for micro/nanostructured surfaces to enable excellent heat transfer performance as well as extended durability.

Cleaning of Fluid-Infused Surfaces in Microchannels

When an immiscible fluid is flowing over a fluid-infused surface with transverse grooves in a microchannel, the infused fluid is either left in or cleaned away from the grooves by the flowing fluid. The cleaning status depends on the geometric parameters of the groove and the contact angle of the flowing fluids. The critical width of the grooves for the infused fluid enclosed in or driven out of the grooves is derived. This study helps to understand the stability of the Cassie status in a low-shear flow where the surface tension plays the key role.