In Situ Embedded Pseudo Pd-Sn Solid Solution in Micropores Silica with Remarkable Catalytic Performance for CO and Propane Oxidation

Interfacial Electron Engineering of PdSn-NbN/C for Highly Efficient Cleavage of the C-C Bonds in Alkaline Ethanol Electrooxidation

The splitting of the C-C bonds of ethanol remains a key issue to be addressed, despite tremendous efforts made over the past several decades. This study highlights the enhancement mechanism of inexpensive NbN-modified Pd1 Sn3 -NbN/C towards the C-C bonds cleavage for alkaline ethanol oxidation reaction (EOR). The optimal Pd1 Sn3 -NbN/C delivers a catalytic activity up to 43.5 times higher than that of commercial Pd/C and high carbonate selectivity (20.5%) toward alkaline EOR. Most impressively, the Pd1 Sn3 -NbN/C presents good durability even after 25 200 s of chronoamperometric testing. The enhanced catalytic performance is mainly due to the interfacial interaction between PdSn and NbN, demonstrated by multiple structural characterization results. In addition, in situ ATR-SEIRAS (Attenuated total reflection-surface enhanced infrared absorption spectroscopy) results suggest that NbN facilitates the C-C bonds cleavage towards the alkaline EOR, followed by the enhanced OH adsorption to promote the subsequent oxidation of C1 intermediates after doping Sn. DFT (density functional theory) calculations indicate that the activation barriers of the C-H bond cleavage in CH3 CH2 OH, CH3 CHOH, CH3 CHO, CH3 CO, CH2 CO, and the C-C bond cleavage in CH3 CO, CH2 CO, CHCO are evidently reduced and the removal of adsorbed CH3 CO and CO becomes easier on the PdSn-NbN/C catalyst surface.

Catalytic oxidation mechanism of AsH3 over CuO@SiO2 core-shell catalysts via experimental and theoretical studies

In this study, CuO@SiO₂ core-shell catalysts were successfully synthesized and applied to efficiently remove hazardous gaseous pollutant arsine (AsH₃) by catalytic oxidation under low-temperature and low-oxygen conditions for the first time. In typical experiments, the CuO@SiO₂ catalysts showed excellent AsH₃ removal activity and stability under low-temperature and low-oxygen conditions. The duration of the AsH₃ conversion rate above 90 % for the CuO@SiO₂ catalysts was 39 h, which was markedly higher than that of other catalysts previously reported in the literature. The considerable catalytic activity and stability were attributed to the protection and confinement effects of the SiO₂ shell, which resulted in highly dispersed CuO nanoparticles. Meanwhile, the strong interaction between the CuO core and SiO₂ shell further facilitated the formation of active species such as coordinatively unsaturated Cu²⁺ and chemisorbed oxygen. The accumulation of oxidation products (As₂O₃ and As₂O₅) on the interface between the CuO core and SiO₂ shell and the pore channels of the SiO₂ shell is the main cause of catalysts deactivation. Furthermore, through combined density functional theory (DFT) calculations and characterization methods, a reaction pathway including gradual dehydrogenation (AsH₃*→AsH₂*→AsH*→As*) and gradual oxidation (2As*→As*+AsO*→2AsO*→As₂O₃) for the catalytic oxidation of AsH₃ on CuO (111) surface was constructed to clarify the detailed reaction mechanism. The CuO@SiO₂ core-shell catalysts applied in this study could provide a powerful method for developing AsH₃ catalysts from multiple know AsH₃ removal systems.

Intra-crystalline mesoporous zeolite encapsulation-derived thermally robust metal nanocatalyst in deep oxidation of light alkanes

Zeolite-confined metal nanoparticles (NPs) have attracted much attention owing to their superior sintering resistance and broad applications for thermal and environmental catalytic reactions. However, the pore size of the conventional zeolites is usually below 2 nm, and reactants are easily blocked to access the active sites. Herein, a facile in situ mesoporogen-free strategy is developed to design and synthesize palladium (Pd) NPs enveloped in a single-crystalline zeolite (silicalite-1, S-1) with intra-mesopores (termed Pd@IM-S-1). Pd@IM-S-1 exhibited remarkable light alkanes deep oxidation performances, and it should be attributed to the confinement and guarding effect of the zeolite shell and the improvement in mass-transfer efficiency and active metal sites accessibility. The Pd−PdO interfaces as a new active site can provide active oxygen species to the first C−H cleavage of light alkanes. This work exemplifies a promising strategy to design other high-performance intra-crystalline mesoporous zeolite-confined metal/metal oxide catalysts for high-temperature industrial thermal catalysis.

Zeolite-confined metal nanoparticles (NPs) have attracted much attention owing to their superior sintering resistance and broad applications. Here the authors develop a facile in situ mesoporogen-free strategy to design and synthesize palladium NPs enveloped within a single-crystalline zeolite with intra-mesopores.

Preparation and Investigation of Pd and Bimetallic Pd-Sn Nanocrystals on γ-Al2O3

One of the key factors for producing highly dispersed controlled nanoparticles is the method used for metal deposition. The decomposition of metal-organic precursors is a good method for deposition of metal nanoparticles with very small sizes and narrow size distributions on the surface of various supports. The preparation process of Pd and bimetallic Pd-Sn nanoparticles supported onto γ-Al2O3 is considered. The samples were prepared by diffusional co-impregnation of the γ-Al2O3 support by using organometallic Pd(acac)2 and Sn(acac)2Cl2 precursors. To achieve the formation of Pd and bimetallic Pd-Sn nanoparticles on the support surface, the synthesized samples were then subjected to thermal decomposition under Ar (to decompose the organometallic bound to the surface while keeping the formed nanoparticles small) followed by an oxidation in O2 (to eliminate the organic compounds remaining on the surface) and a reduction in H2 (to reduce the nanoparticles oxidized during the previous step). A combination of methods (ICP-OES, TPR-H2, XPS, TEM/EDX) was used to compare the physical-chemical properties of the synthesized Pd and bimetallic Pd-Sn nanoparticles supported on the γ-Al2O3. The three samples exhibit narrow size distribution with a majority on nanoparticles between 3 and 5 nm. Local EDX measurements clearly showed that the nanoparticles are bimetallic with the expected chemical composition and the measured global composition by ICP-OES. The surface composition and electronic properties of Pd and Sn on the γ-Al2O3 support were investigated by XPS, in particular the chemical state of palladium and tin after each step of thermal decomposition treatments (oxidation, reduction) by the XPS method has been carried out. The reducibility of the prepared bimetallic nanoparticles was measured by hydrogen temperature programmed reduction (TPR-H2). The temperature programmed reduction TPR-H2 experiments have confirmed the existence of strong surface interactions between Pd and Sn, as evidenced by hydrogen spillover of Pd to Sn (Pd-assisted reduction of oxygen precovered Sn). These results lead us to propose a mechanism for the formation of the bimetallic nanoparticles.

Amorphous Boron Dispersed in LaCoO3 with Large Oxygen Vacancies for Efficient Catalytic Propane Oxidation

Unsatisfactory oxygen mobility is a considerable barrier to the development of perovskites for low-temperature volatile organic compounds (VOCs) oxidation. This work introduced small amounts of dispersed non-metal boron into the LaCoO₃ crystal through an easy sol-gel method to create more oxygen defects, which are conducive to the catalytic performance of propane (C₃ H₈ ) oxidation. It reveals that moderate addition of boron successfully induces a high distortion of the LaCoO₃ crystal, decreases the perovskite particle size, and produces a large proportion of bulk Co²⁺ species corresponding to abundant oxygen vacancies. Additionally, surface Co³⁺ species, as the acid sites, which are active for cleaving the C-H bonds of C₃ H₈ molecules, are enriched. As a result, the LCB-7 (molar ratio of Co/B=0.93:0.07) displays the best C₃ H₈ oxidation activity. Simultaneously, the above catalyst exhibits superior thermal stability against CO₂ and H₂ O, lasting 200 h. This work provides a new strategy for modifying the catalytic VOCs oxidation performance of perovskites by the regulation of amorphous boron dispersion.

Construction and evolution of active palladium species on phase-regulated reducible TiO2 for methane combustion

Non-traditional amorphous Pd²⁺ species on the surface of Pd/TiO₂ catalysts facilitate CH₄ combustion, while formed Pd_xTi_1−xO₂ would be detrimental.

The effects of MoO3 impregnation order on the catalytic activity for propane combustion over Pt/ZrO2 catalysts: the crucial roles of Pt–MoO3 interfacial sites density

MoO₃ promoted Pt/ZrO₂ catalysts were prepared by co-impregnation (Pt–Mo/ZrO₂) or stepwise impregnation (Pt/Mo/ZrO₂ and Mo/Pt/ZrO₂) for propane combustion.

Enhancement of propane combustion activity over CoOx catalysts by introducing C2–C5 diols

C₂–C₅ diols effectively promote the degradation of propane by weakening the Co–O bond strength of CoO_x.

Controllable P Doping of the LaCoO3 Catalyst for Efficient Propane Oxidation: Optimized Surface Co Distribution and Enhanced Oxygen Vacancies

The properties of LaCoO₃ are modified by a controllable P doping strategy via a simple sol-gel route. It is demonstrated that appropriate P doping is beneficial for forming a relatively pure perovskite phase and hinders the growth of perovskite nanoparticles. The combined results of density functional theory (DFT), extended X-ray absorption fine structure (EXAFS), X-ray absorption near-edge structure (XANES), temperature-programmed reduction of hydrogen (H₂-TPR), X-ray photoelectron spectroscopy (XPS), and temperature-programmed desorption of ammonia (NH₃-TPD) reveal that appropriate P doping gives rise to more oxygen vacancies, optimized distribution of Co ions, and improved surface acidity, which are beneficial for the adsorption of active oxygen species and the activation of propane molecules, resulting in an excellent catalytic oxidation performance. Especially, LaCo_0.97P_0.03O₃ exhibits more surface-active oxygen species, higher bulk Co³⁺ proportion, increased surface Co²⁺ species, and increased acidity, resulting in its superior propane oxidation performance, which is dominated by the Langmuir-Hinshelwood mechanism. In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) confirms that the presence of P will accelerate oxygen mobility, which in turn promotes the oxidation rate. Moreover, the obtained LaCo_0.97P_0.03O₃ catalyst displays excellent thermal stability during the 60 h durability test at 400 °C and strong resistance against 5 vol % H₂O and/or 5 vol % CO₂ for prolonged 150 h.

Templated synthesis of nickel nanoparticles embedded in a carbon layer within silica capsules

The encapsulation of small non-noble metal nanoparticles (NPs) within an inorganic layer has received considerable attention owing to their enhanced stability and high catalytic activity. Using a combination of emulsion-free polymerization, inner RF-Ni2+ and outer SiO2 coating, and subsequent carbonization treatment, herein, we have fabricated worm-like structured Ni-based composites in which a high density of nickel NPs are embedded in a carbon layer and also entrapped by SiO2 nanocages. We find that the carbonization temperature plays a vital role in adjusting the size of the Ni NPs. A detailed examination of the encapsulated nickel particles synthesized at 700 °C exhibited the best performance on the catalysis of the reduction of 4-NPs. Moreover, owing to the good alloying ability of the Ni NPs with noble metal NPs, the Ni-Pd alloy NPs are also entrapped in the SiO2 nanocages, which exhibit better performance on the catalysis than the Ni-based composites. The encapsulation of Ni-Pd alloys within SiO2 nanocages also improves stability against agglomeration and metal separation during catalytic operation.

Mechanochemical redox: a calcination-free process to support CoMnOx catalysts

A calcination-free process (mechanochemical redox loading method) to load CoMnO_x onto various supports for efficient and stable CO oxidation.

Ru/CeO2 Catalyst with Optimized CeO2 Support Morphology and Surface Facets for Propane Combustion

Tailoring the interfaces between active metal centers and supporting materials is an efficient strategy to obtain a superior catalyst for a certain reaction. Herein, an active interface between Ru and CeO₂ was identified and constructed by adjusting the morphology of CeO₂ support, such as rods (R), cubes (C), and octahedra (O), to optimize both the activity and the stability of Ru/CeO₂ catalyst for propane combustion. We found that the morphology of CeO₂ support does not significantly affect the chemical states of Ru species but controls the interaction between the Ru and CeO₂, leading to the tuning of oxygen vacancy in the CeO₂ surface around the Ru-CeO₂ interface. The Ru/CeO₂ catalyst possesses more oxygen vacancy when CeO₂-R with predominantly exposed CeO₂{110} surface facets is used, providing a higher ability to adsorb and activate oxygen and propane. As a result, the Ru/CeO₂-R catalyst exhibits higher catalytic activity and stability for propane combustion compared with the Ru/CeO₂-C and Ru/CeO₂-O catalysts. This work highlights a new strategy for the design of efficient metal/CeO₂ catalysts by engineering morphology and associated surface facet of CeO₂ support for the elimination of light alkane pollutants and other volatile organic compounds.

Understanding the Impact of Defects on Catalytic CO Oxidation of LaFeO3-Supported Rh, Pd, and Pt Single-Atom Catalysts

Understanding the intrinsic catalytic properties of perovskite materials can accelerate the development of highly active and abundant complex oxide catalysts. Here, we performed a first-principles density functional theory study combined with a microkinetics analysis to comprehensively investigate the influence of defects on catalytic CO oxidation of LaFeO₃ catalysts containing single atoms of Rh, Pd, and Pt. La defects and subsurface O vacancies considerably affect the local electronic structure of these single atoms adsorbed at the surface or replacing Fe in the surface of the perovskite. As a consequence, not only the stability of the introduced single atoms is enhanced but also the CO and O₂ adsorption energies are modified. This also affects the barriers for CO oxidation. Uniquely, we find that the presence of La defects results in a much higher CO oxidation rate for the doped perovskite surface. A linear correlation between the activation barrier for CO oxidation and the surface O vacancy formation energy for these models is identified. Additionally, the presence of subsurface O vacancies only slightly promotes CO oxidation on the LaFeO₃ surface with an adsorbed Rh atom. Our findings suggest that the introduction of La defects in LaFeO₃-based environmental catalysts could be a promising strategy toward improved oxidation performance. The insights revealed herein guide the design of the perovskite-based three-way catalyst through compositional variation.

MOF-derived Ni@NC catalyst: synthesis, characterization, and application in one-pot hydrogenation and reductive amination

MOF-derived Ni@NC is prepared and used as highly selective catalyst for one-pot hydrogenation and reductive amination.