Transforming Monolayer Transition-Metal Dichalcogenide Nanosheets into One-Dimensional Nanoscrolls with High Photosensitivity

Unveiling the Mechanism of Spontaneous Nanoscroll Formation from Janus Transition Metal Dichalcogenide Nanoribbons

Due to the atomic asymmetry, Janus transition metal dichalcogenide monolayers possess spontaneous curling and can even form one-dimensional nanoscrolls. Unveiling this spontaneous formation mechanism of nanoscrolls is of great importance for precise structural control. In this paper, we successfully simulate the process of Janus MoSSe nanoscroll formation from flat nanoribbons, based on molecular dynamics (MD) simulations with hybrid potentials. The spontaneous scrolling is purely driven by the relaxation of intrinsic strain in Janus MoSSe. The final structure of nanoscroll is strongly affected by the length of nanoribbon with a nonmonotonous relation. To further understand the mechanism, we establish a thermodynamic model to determine the inner radius of MoSSe nanoscrolls, which is shown to be related to spontaneous curvature, bending stiffness, interlayer van der Waals interaction, interlayer distance, and length of initial nanoribbon. The results correspond well with MD simulations of nanoscrolls from flat nanoribbons and the molecular static simulations of directly built nanoscrolls. Moreover, the inner radii of MoSeTe and MoSTe nanoscrolls are predicted based on the model. Our results provide insights into the Janus TMD nanoscroll formation and a pathway for controllable fabrication of nanoscrolls.

Nanoscale detection of carbon dots-induced changes in actin skeleton of neural cells

Understanding the cytotoxicity of fluorescent carbon dots (CDs) is crucial for their applications, and various biochemical assays have been used to study the effects of CDs on cells. Knowledge on the effects of CDs from a biophysical perspective is integral to the recognition of their cytotoxicity, however the related information is very limited. Here, we report that atomic force microscopy (AFM) can be used as an effective tool for studying the effects of CDs on cells from the biophysical perspective. We achieve this by integrating AFM-based nanomechanics with AFM-based imaging. We demonstrate the performance of this method by measuring the influence of CDs on living human neuroblastoma (SH-SY5Y) cells at the single-cell level. We find that high-dose CDs can mechanically induce elevated normalized hysteresis (energy dissipation during the cell deformation) and structurally impair actin skeleton. The nanomechanical change highly correlates with the alteration of actin filaments, indicating that CDs-induced changes in SH-SY5Y cells are revealed in-depth from the AFM-based biophysical aspect. We validate the reliability of the biophysical observations using conventional biological methods including cell viability test, fluorescent microscopy, and western blot assay. Our work contributes new and significant information on the cytotoxicity of CDs from the biophysical perspective.

Space-Confined Growth of Ultrathin P-Type GeTe Nanosheets for Broadband Photodetectors

As p-type phase-change degenerate semiconductors, crystalline and amorphous germanium telluride (GeTe) exhibit metallic and semiconducting properties, respectively. However, the massive structural defects and strong interface scattering in amorphous GeTe films significantly reduce their performance. In this work, two-dimensional (2D) p-type GeTe nanosheets are synthesized via a specially designed space-confined chemical vapor deposition (CVD) method, with the thickness of the GeTe nanosheets reduced to 1.9 nm. The space-confined CVD method improves the crystallinity of ultrathin GeTe by lowering the partial pressure of the reactant gas, resulting in GeTe nanosheets with excellent p-type semiconductor properties, such as a satisfactory on/off ratio of 105. Temperature-dependent electrical measurements demonstrate that variable-range hopping and optical-phonon-assisted hopping mechanisms dominate transport behavior at low and high temperatures, respectively. GeTe devices exhibit significantly high responsivity (6589 and 2.2 A W-1 at 633 and 980 nm, respectively) and detectivity (1.67 × 1011 and 1.3 × 108 Jones at 633 and 980 nm, respectively), making them feasible for broadband photodetectors in the visible to near-infrared range. Furthermore, the fabricated GeTe/WS2 diode exhibits a rectification ratio of 103 at zero gate voltage. These satisfactory p-type semiconductor properties demonstrate that ultrathin GeTe exhibits enormous potential for applications in optoelectronic interconnection circuits.

Rhodamine 6G/Transition Metal Dichalcogenide Hybrid Nanoscrolls for Enhanced Optoelectronic Performance

The low light absorption efficiency has seriously hindered the application of two-dimensional transition metal dichalcogenide (TMDC) nanosheets in the field of optoelectronic devices. Various approaches have been used to improve the performance of TMDC nanosheets. Preparation of one-dimensional TMDC nanoscrolls in combination with photoactive materials has been a promising method to improve their properties recently. In this work, we report a facile method to enhance the optoelectronic performance of TMDC nanoscrolls by wrapping the photoactive organic dye rhodamine (R6G) into them. After R6G molecules were deposited on monolayer TMDC nanosheets by the solution method, the R6G/MoS2 nanoscrolls with lengths up to hundreds of microns were prepared in a short time by dropping a mixture of ammonia and ethanol solution on the R6G/MoS2 nanosheets. The as-obtained R6G/MoS2 nanoscrolls were well characterized by optical microscopy, atomic force microscopy, Raman spectroscopy, and transmission electron microscopy to prove the encapsulation of R6G. There are multiple type II heterojunction interfaces in the R6G/MoS2 nanoscrolls, which can promote the generation of photo-induced carriers and the following electron-hole separation. The separated electrons were transported rapidly along the axial direction of the R6G/MoS2 nanoscrolls, which greatly improves the efficiency of light absorption and photoresponse. Under the irradiation of an incident 405 nm laser, the photoresponsivity, carrier mobility, external quantum efficiency, and detectivity of R6G/MoS2 nanoscrolls were enhanced to 66.07 A/W, 132.93 cm2V-1s-1, 20,261%, and 1.25 × 1012 cm·Hz1/2W-1, which are four orders of magnitude higher than those of monolayer MoS2 nanosheets. Our work indicates that the R6G/TMDC hybrid nanoscrolls could be promising materials for high-performance optoelectronic devices.

Real-Time Monitoring of Adsorption-Induced Scrolling of Colloidal Inorganic Nanosheets

Inorganic nanotubes have attracted much attention due to their unique physicochemical properties. Nanotubes can be prepared by scrolling exfoliated nanosheets under ambient conditions. However, how the nanosheet scrolled in its colloidal state has not been experimentally visualized. In this paper, we directly observed the scrolling process of nanosheets upon adsorption of organic cations. Exfoliated flat nanosheets of niobate and clay in aqueous colloids were found to scroll by adding organic cations, such as exfoliation reagents, to the colloids. Employment of cationic stilbazolium dye enabled in situ observation of the dye adsorption and scrolling by optical microscopy based on changes in color and morphology of the nanosheets. The scrolling was promoted for nanosheets adsorbed with a stilbazolium dye with a longer alkyl chain, suggesting that the interaction between the hydrophobic parts of the dye cations is the driving force of the scrolling. This finding should encourage research on the formation of nanotubes from nanosheets and also provides important guidelines for the selection of appropriate exfoliation reagents when exfoliating nanosheets from layered crystals.

One-Dimensional MoS2 Nanoscrolls as Miniaturized Memories

Dimensionality of materials is closely related to their physical properties. For two-dimensional (2D) semiconductors such as monolayer molybdenum disulfide (MoS2), converting them from 2D nanosheets to one-dimensional (1D) nanoscrolls could contribute to remarkable electronic and optoelectronic properties, yet the rolling-up process still lacks sufficient controllability, which limits the development of their device applications. Herein we report a modified solvent evaporation-induced rolling process that halts at intermediate states and achieve MoS2 nanoscrolls with high yield and decent axial uniformity. The accordingly fabricated nanoscroll memories exhibit an on/off ratio of ∼104 and a retention time exceeding 103 s and can realize multilevel storage with pulsed gate voltages. Such open-end, high-curvature, and hollow 1D nanostructures provide new possibilities to manipulate the hysteresis windows and, consequently, the charge storage characteristics of nanoscale field-effect transistors, thereby holding great promise for the development of miniaturized memories.

Directed morphology engineering of 2D MoS2 nanosheets to 1D nanoscrolls with enhanced hydrogen evolution and specific capacitance

1D-molybdenum disulfide (MoS2) nanoscrolls displayed enhanced electrochemical properties compared to 2D-MoS2 nanosheet counterparts. Rolling of nanosheets is the main fabrication route to nanoscrolls. However, owing to the conflict between chemical stability and multiple bending, the morphology transition from nanosheets to nanoscrolls is quite challenging. Herein we describe a reversible morphology transition from nanosheets to nanoscrolls by utilizing non-covalent interactions between MoS2 nanosheets and phenothiazine based organic dye. Interestingly, nanoscrolls can easily be opened back into nanosheets by destroying the non-covalent interactions with organic solvents. The prepared nanoscrolls exhibited enhanced electrochemical properties than nanosheets. Compared to nanosheets, nanoscrolls exhibited comparatively lower overpotential with a Tafel slope of 141 mV dec-1 and high specific capacitance of 1868 F g-1. Hydrogen evolution by the Volmer-Heyrovsky mechanism being superior for the nanoscrolls is envisaged by the relatively increased availability of Hads sites at MoS2 edges induced by scrolling. Whereas the high specific capacitance value of nanoscrolls is ascribed to the enhanced electrical double-layer capacitance mediated charge storage, which arises due to the synergistic effect of both scrolled structure and the electron-rich phenothiazine-based dye.

Spontaneous formation of MoS2 nanoscrolls from flat monolayers with sulfur vacancies: a molecular dynamics investigation

The unique physical properties exhibited by one-dimensional nanoscrolls assembled from nanosheets have propelled them into the spotlight of two-dimensional materials research. However, the self-scrolling mechanism of transition metal dichalcogenides has not been unveiled with an appropriate theoretical approach. In this paper, we systematically investigate the spontaneous formation of MoS2 nanoscrolls from flat monolayers by molecular dynamics simulations based on a reactive force field. The sulfur vacancies on one side break the atomic symmetry and the reconstruction acts as the driving force for the curling of the flat nanoribbon. If sulfur vacancies are arranged in a line, clear bending angles of the nanoribbon can be obtained and the angle relies on the direction of the line vacancy. With random sulfur vacancies on the top, spontaneous curling and a time-dependent scrolling process of the nanoribbon can be observed. The interplay between dangling bonds and van der Waals (vdW) interactions plays a pivotal role in the formation process of MoS2 nanoscrolls. With an increasing density of sulfur vacancies, the curvature of the nanoscrolls increases. Meanwhile, the scrolling rate accelerates and the time required for the formation of vdW structures decreases. These results provide theoretical insights into the fabrication of nanoscrolls and pave avenues for tailoring nanoscrolls with different morphologies.

Transition Metal Dichalcogenides Nanoscrolls: Preparation and Applications

Two-dimensional (2D) transition metal dichalcogenides (TMDCs) nanosheets have shown extensive applications due to their excellent physical and chemical properties. However, the low light absorption efficiency limits their application in optoelectronics. By rolling up 2D TMDCs nanosheets, the one-dimensional (1D) TMDCs nanoscrolls are formed with spiral tubular structure, tunable interlayer spacing, and opening ends. Due to the increased thickness of the scroll structure, the light absorption is enhanced. Meanwhile, the rapid electron transportation is confined along the 1D structure. Therefore, the TMDCs nanoscrolls show improved optoelectronic performance compared to 2D nanosheets. In addition, the high specific surface area and active edge site from the bending strain of the basal plane make them promising materials for catalytic reaction. Thus, the TMDCs nanoscrolls have attracted intensive attention in recent years. In this review, the structure of TMDCs nanoscrolls is first demonstrated and followed by various preparation methods of the TMDCs nanoscrolls. Afterwards, the applications of TMDCs nanoscrolls in the fields of photodetection, hydrogen evolution reaction, and gas sensing are discussed.

A single step wet chemical approach to bifunctional ultrathin (ZnO)62(Fe2O3)38 dendritic nanosheets

At the ultrathin scale, nanomaterials exhibit interesting chemical and physical properties, like flexibility, and polymer-like rheology. However, to limit the dimensions of composite nanomaterials at the ultrathin level is still a challenging task. Herein, by adopting a new low temperature single step and single pot wet chemical approach, we have successfully fabricated two dimensional (2D) mixed oxide ZnO-Fe₂O₃ dendritic nanosheets (FZDNSs). Various control experimental outcomes demonstrate that precursor salts of both the metals are crucial for the formation of stable 2D FZDNSs. The obtained FZDNSs not only exhibit the best photoreduction performance but also much enhanced electrocatalytic performance. This work will provide a promising avenue for the synthesis of cost effective transition metal mixed oxide based 2D nanosheets having wide ranging applications.

Enhancing Photodetection Ability of MoS2 Nanoscrolls via Interface Engineering

Van der Waals semiconductors have been really confirmed in two-dimensional (2D) layered systems beyond the traditional limits of lattice-matching requirements. The extension of this concept to the 1D atomic level may generate intriguing physical functionalities due to its non-covalent bonding surface. However, whether the curvature of the lattice in such rolled-up structures affects their optoelectronic features or the performance of devices established on them remains an open question. Here, MoS₂-based nanoscrolls were obtained by virtue of an alkaline solution-assisted method and the 0D/1D (BaTiO₃/MoS₂) strategy to tune their optoelectronic properties and improve the light sensing performance was explored. The capillary force generated by a drop of NaHCO₃ solution could drive the delamination of nanosheets from the underlying substrate and a spontaneous rolling-up process. The package of BaTiO₃ particles in MoS₂ nanoscrolls has been evident by TEM image, and the optical characterizations were mirrored via micro-Raman spectroscopy and photoluminescence. These bare MoS₂ nanoscrolls reveal a reduced photoresponse compared to the plane structures due to the curvature of the lattice. However, such BaTiO₃/MoS₂ nanoscrolls exhibit a significantly improved photodetection (R_hybrid = 73.9 A/W vs R_only = 1.1 A/W and R_2D = 1.5 A/W at 470 nm, 0.58 mW·cm^-2), potentially due to the carrier extraction/injection occurring between BaTiO₃ and MoS₂. This study thereby provides an insight into 1D van der Waals material community and demonstrates a general approach to fabricate high-performance 1D van der Waals optoelectronic devices.

Recent Advances in Rolling 2D TMDs Nanosheets into 1D TMDs Nanotubes/Nanoscrolls

Transition metal dichalcogenides (TMDs) van der Waals (vdW) 1D heterostructures are recently synthesized from 2D nanosheets, which open up new opportunities for potential applications in electronic and optoelectronic devices. The most recent and promising strategies in regards to forming 1D TMDs nanotubes (NTs) or nanoscrolls (NSs) in this review article as well as their heterostructures that are produced from 2D TMDs are summarized. In order to improve the functionality of ultrathin 1D TMDs that are coaxially combined with boron nitride nanotubes and single-walled carbon nanotubes. 1D heterostructured devices perform better than 2D TMD nanosheets when the two devices are compared. The photovoltaic effect in WS₂ or MoS₂ NTs without a junction may exceed the Shockley-Queisser limit for the above-band-gap photovoltage generation. Photoelectrochemical hydrogen evolution is accelerated when monolayer WS₂ or MoS₂ NSs are incorporated into a heterojunction. In addition, the photovoltaic performance of the WSe₂ /MoS₂  NSs junction is superior to that of the performance of MoS₂ NSs. The summary of the current research about 1D TMDs can be used in a variety of ways, which assists in the development of new types of nanoscale optoelectronic devices. Finally, it also summarizes the current challenges and prospects.

Indirect Band Gap in Scrolled MoS2 Monolayers

MoS₂ nanoscrolls that have inner core radii of ∼250 nm are generated from MoS₂ monolayers, and the optical and transport band gaps of the nanoscrolls are investigated. Photoluminescence spectroscopy reveals that a MoS₂ monolayer, originally a direct gap semiconductor (∼1.85 eV (optical)), changes into an indirect gap semiconductor (∼1.6 eV) upon scrolling. The size of the indirect gap for the MoS₂ nanoscroll is larger than that of a MoS₂ bilayer (∼1.54 eV), implying a weaker interlayer interaction between concentric layers of the MoS₂ nanoscroll compared to Bernal-stacked MoS₂ few-layers. Transport measurements on MoS₂ nanoscrolls incorporated into ambipolar ionic-liquid-gated transistors yielded a band gap of ∼1.9 eV. The difference between the transport and optical gaps indicates an exciton binding energy of 0.3 eV for the MoS₂ nanoscrolls. The rolling up of 2D atomic layers into nanoscrolls introduces a new type of quasi-1D nanostructure and provides another way to modify the band gap of 2D materials.

Direct Synthesis of MoS2 Nanosheets in Reduced Graphene Oxide Nanoscroll for Enhanced Photodetection

Due to their unique tubular and spiral structure, graphene and graphene oxide nanoscrolls (GONS) have shown extensive applications in various fields. However, it is still a challenge to improve the optoelectronic application of graphene and GONS because of the zero bandgap of graphene. Herein, ammonium tetrathiomolybdate ((NH₄)₂MoS₄) was firstly wrapped into the ((NH₄)₂MoS₄@GONS) by molecular combing the mixture of (NH₄)₂MoS₄ and GO solution on hydrophobic substrate. After thermal annealing, the (NH₄)₂MoS₄ and GO were converted to MoS₂ nanosheets and reduced GO (RGO) simultaneously, and, thus, the MoS₂@RGONS was obtained. Raman spectroscopy and high-resolution transmission electron microscopy were used to confirm the formation of MoS₂ nanosheets among the RGONS. The amount of MoS₂ wrapped in RGONS increased with the increasing height of GONS, which is confirmed by the atomic force microscopy and Raman spectroscopy. The as-prepared MoS₂@RGONS showed much better photoresponse than the RGONS under visible light. The photocurrent-to-dark current ratios of photodetectors based on MoS₂@RGONS are ~570, 360 and 140 under blue, red and green lasers, respectively, which are 81, 144 and 35 times of the photodetectors based on RGONS. Moreover, the MoS₂@RGONS-based photodetector exhibited good power-dependent photoresponse. Our work indicates that the MoS₂@RGONS is expected to be a promising material in the fields of optoelectronic devices and flexible electronics.

Enhancing the Photoelectrochemical Hydrogen Evolution Reaction through Nanoscrolling of Two-Dimensional Material Heterojunctions

The clean production of hydrogen from water using sunlight has emerged as a sustainable alternative toward large-scale energy generation and storage. However, designing photoactive semiconductors that are suitable for both light harvesting and water splitting is a pivotal challenge. Atomically thin transition metal dichalcogenides (TMD) are considered as promising photocatalysts because of their wide range of available electronic properties and compositional variability. However, trade-offs between carrier transport efficiency, light absorption, and electrochemical reactivity have limited their prospects. We here combine two approaches that synergistically enhance the efficiency of photocarrier generation and electrocatalytic efficiency of two-dimensional (2D) TMDs. The arrangement of monolayer WS₂ and MoS₂ into a heterojunction and subsequent nanostructuring into a nanoscroll (NS) yields significant modifications of fundamental properties from its constituents. Spectroscopic characterization and ab initio simulation demonstrate the beneficial effects of straining and wall interactions on the band structure of such a heterojunction-NS that enhance the electrochemical reaction rate by an order of magnitude compared to planar heterojunctions. Phototrapping in this NS further increases the light-matter interaction and yields superior photocatalytic performance compared to previously reported 2D material catalysts and is comparable to noble-metal catalyst systems in the photoelectrochemical hydrogen evolution reaction (PEC-HER) process. Our approach highlights the potential of morphologically varied TMD-based catalysts for PEC-HER.

Solvent-Free Preparation of Closely Packed MoS2 Nanoscrolls for Improved Photosensitivity

Due to their enhanced light absorption efficiency, one-dimensional (1D) transition metal dichalcogenide (TMDC) nanoscrolls derived from two-dimensional (2D) TMDC nanosheets have shown excellent optoelectronic properties. Currently, organic solvent and alkaline droplet-assisted scrolling methods are popular for preparing TMDC nanoscrolls. Unfortunately, the adsorption of organic solvent or alkaline impurities on TMDC is inevitable during the preparation, which affects the optoelectronic properties of TMDC. In this work, we report a solvent-free method to prepare closely packed MoS₂ nanoscrolls by dragging a deionized water droplet onto the chemical vapor deposition grown monolayer MoS₂ nanosheets at 100 °C (referred to as MoS₂ NS-W). The as-prepared MoS₂ NS-W was well characterized by optical microscopy, atomic force microscopy, and ultralow frequency (ULF) Raman spectroscopy. After high temperature annealing, the height of MoS₂ nanoscrolls prepared using an ethanol droplet (referred to as MoS₂ NS-E) greatly decreased, indicating the loss of encapsulated ethanol in MoS₂ NS-E. While the height of MoS₂ NS-W was almost unchanged under the same conditions, implying that no water was embedded in the scroll. Compared to the MoS₂ NS-E, the MoS₂ NS-W shows more ULF breathing mode peaks, confirming the stronger interlayer interaction. In addition, the MoS₂ NS-W shows a higher Young's modulus than MoS₂ NS-E, which could arise from the closely packed scroll structure. Importantly, the MoS₂ NS-W device showed a photosensitivity 1 order of magnitude higher than that of the MoS₂ NS-E device under blue, green, and red lasers, respectively. The decreased photosensitivity of MoS₂ NS-E was attributed to the larger dark current, which might be assigned to the adsorbed ethanol between the adjacent layers in MoS₂ NS-E. Our work provides a solvent-free method to prepare closely packed MoS₂ nanoscrolls at large scale and demonstrates their great potential for high-performance optoelectronic devices.

High-responsivity photodetector based on scrolling monolayer MoS2hybridized with carbon quantum dots

The monolayer MoS₂based photodetectors have been widely investigated, which show limited photoelectric performances due to its low light absorption and uncontrollable adsorbates. In this paper, we present a MoS₂-based hybrid nanoscrolls device, in which one-dimensional nanoscrollsof MoS₂is hybridized with carbon quantum dots (CQDs). This device architecture effectively enhanced the photodetection performance. The photoresponsivity and detectivity values of MoS₂/CQDs-NS photodetectors are respectively 1793 A W^-1and 5.97 × 10¹²Jones, which are 830-fold and 268-fold higher than those of pristine MoS₂under 300 nm illumination atV_ds = 5 V. This research indicates a significant progress in fabricating high-performance MoS₂photodetectors.

Wrapping Plasmonic Silver Nanoparticles inside One-Dimensional Nanoscrolls of Transition-Metal Dichalcogenides for Enhanced Photoresponse

The low light absorption of transition-metal dichalcogenide (TMDC) nanosheets hinders their application as high-performance optoelectronic devices. Rolling them up into one-dimensional (1D) nanoscrolls and decorating them with plasmonic nanoparticles (NPs) are both effective strategies for enhancing their performance. When these two approaches are combined, in this work, the light-matter interaction in TMDC nanosheets is greatly improved by encapsulating silver nanoparticles (Ag NPs) in TMDC nanoscrolls. After the silver nitrate (AgNO₃) solution was spin-coated on monolayer (1L) MoS₂ and WS₂ nanosheets grown by chemical vapor deposition, Ag NPs were homogeneously formed to obtain MoS₂-Ag and WS₂-Ag nanosheets due to the TMDC-assisted spontaneous reduction, and their size and density can be well controlled by tuning the concentration of the AgNO₃ solution. By the simple placement of alkaline droplets on MoS₂-Ag or WS₂-Ag hybrid nanosheets, MoS₂-Ag or WS₂-Ag nanoscrolls with large sizes were obtained in large area. The obtained hybrid nanoscrolls exhibited up to 500 times increased photosensitivities compared with 1L MoS₂ nanosheets, arising from the localized surface plasmon resonance effect of Ag NPs and the scrolled-nanosheet structure. Our work provides a reliable method for the facile and large-area preparation of NP/nanosheet hybrid nanoscrolls and demonstrates their great potential for high-performance optoelectronic devices.

QD/2D Hybrid Nanoscrolls: A New Class of Materials for High-Performance Polarized Photodetection and Ultralow Threshold Laser Action

Nanoscrolls are a class of nanostructures where atomic layers of 2D materials are stacked consecutively in a coaxial manner to form a 1D spiral topography. Self-assembly of chemical vapor deposition grown 2D WS₂ monolayer into quasi-1D van der Waals scroll structure instigates a plethora of unique physiochemical properties significantly different from its 2D counterparts. The physical properties of such nanoscrolls can be greatly manipulated upon hybridizing them with high-quantum-yield colloidal quantum dots, forming 0D/2D structures. The efficient dissociation of excitons at the heterojunctions of QD/2D hybridized nanoscrolls exhibits a 3000-fold increased photosensitivity compared to the pristine 2D-material-based nanoscroll. The synergistic effects of confined geometry and efficient QD scatterers produce a nanocavity with multiple feedback loops, resulting in coherent lasing action with an unprecedentedly low lasing threshold. Predominant localization of the excitons along the circumference of this helical scroll results in a 12-fold brighter emission for the parallel-polarized transition compared to the perpendicular one, as confirmed by finite-difference time-domain simulation. The versatility of hybridized nanoscrolls and their unique properties opens up a powerful route for not-yet-realized devices toward practical applications.

Surface-Modified Ultrathin InSe Nanosheets with Enhanced Stability and Photoluminescence for High-Performance Optoelectronics

Indium selenide (InSe) has become a research hotspot because of its favorable carrier mobility and thickness-tunable band gap, showing great application potential in high-performance optoelectronic devices. The trend of miniaturization in optoelectronics has forced the feature sizes of the electronic components to shrink accordingly. Therefore, atomically thin InSe crystals may play an important role in future optoelectronics. Given the instability and ultralow photoluminescent (PL) emission of mechanically exfoliated ultrathin InSe, synthesis of highly stable mono- and few-layer InSe nanosheets with high PL efficiency has become crucial. Herein, ultrathin InSe nanosheets were prepared via thermal annealing of electrochemically intercalated products from bulk InSe. The size and yield of the as-prepared nanosheets were up to ∼160 μm and ∼70%, respectively, and ∼80% of the nanosheets were less than five layer. Impressively, the as-prepared nanosheets showed greatly enhanced stability and PL emission because of surface modification by carbon species. Efficient photoresponsivity of 2 A/W was achieved in the as-prepared nanosheet-based devices. These nanosheets were further assembled into large-area thin films with photoresponsivity of 16 A/W and an average Hall mobility of about 5 cm² V^-1 s^-1. Finally, one-dimensional (1D) InSe nanoscrolls with a length up to 90 μm were constructed by solvent-assisted self-assembly of the exfoliated nanosheets.

A review of molybdenum disulfide (MoS2) based photodetectors: from ultra-broadband, self-powered to flexible devices

Two-dimensional transition metal dichalcogenides (2D TMDs) have attracted much attention in the field of optoelectronics due to their tunable bandgaps, strong interaction with light and tremendous capability for developing diverse van der Waals heterostructures (vdWHs) with other materials. Molybdenum disulfide (MoS2) atomic layers which exhibit high carrier mobility and optical transparency are very suitable for developing ultra-broadband photodetectors to be used from surveillance and healthcare to optical communication. This review provides a brief introduction to TMD-based photodetectors, exclusively focused on MoS2-based photodetectors. The current research advances show that the photoresponse of atomic layered MoS2 can be significantly improved by boosting its charge carrier mobility and incident light absorption via forming MoS2 based plasmonic nanostructures, halide perovskites-MoS2 heterostructures, 2D-0D MoS2/quantum dots (QDs) and 2D-2D MoS2 hybrid vdWHs, chemical doping, and surface functionalization of MoS2 atomic layers. By utilizing these different integration strategies, MoS2 hybrid heterostructure-based photodetectors exhibited remarkably high photoresponsivity raging from mA W-1 up to 1010 A W-1, detectivity from 107 to 1015 Jones and a photoresponse time from seconds (s) to nanoseconds (10-9 s), varying by several orders of magnitude from deep-ultraviolet (DUV) to the long-wavelength infrared (LWIR) region. The flexible photodetectors developed from MoS2-based hybrid heterostructures with graphene, carbon nanotubes (CNTs), TMDs, and ZnO are also discussed. In addition, strain-induced and self-powered MoS2 based photodetectors have also been summarized. The factors affecting the figure of merit of a very wide range of MoS2-based photodetectors have been analyzed in terms of their photoresponsivity, detectivity, response speed, and quantum efficiency along with their measurement wavelengths and incident laser power densities. Conclusions and the future direction are also outlined on the development of MoS2 and other 2D TMD-based photodetectors.

Strain Effect Enhanced Ultrasensitive MoS2 Nanoscroll Avalanche Photodetector

Two-dimensional (2D) materials and their derived quasi one-dimensional structure provide incredible possibilities for the field of photoelectric detection due to their intrinsic optical and electrical properties. However, the photogenerated carriers in atomically thin media are poor due to the low optical absorption, which greatly limits their performance. Here, in the MoS₂ nanoscroll photodetector, we meticulously investigated the avalanche multiplication effect. The results show that by employing the nanoscroll structure, the required threshold electrical field for triggering avalanche multiplication is significantly lower than that of MoS₂ flake due to the modulation of the energy band and intervalley scattering through the strain effect. Consequently, avalanche multiplication could efficiently enhance the photoresponsivity to >10⁴ A/W. Furthermore, enhanced avalanche multiplication could be generalized to other TMDCs through theoretical prediction. The results not only are significant for the understanding of the intrinsic nature of 2D materials but also reveal meaningful advances in high-performance and low-power consumption photodetection.

Engineering Phase Transformation of MoS2/RGO by N-doping as an Excellent Microwave Absorber

As a hot two-dimensional (2D) material, molybdenum disulfide has been attracting extensive attention for electromagnetic wave response applications because of its unique structure. However, the electronic conductivity of nanostructured MoS₂ needs to be optimized urgently. Here, nitrogen-doped 1T@2H-MoS₂/reduced graphene oxide (RGO) composites are effectively constructed by hydrothermal reaction and consecutive calcination under an NH₃ atmosphere. The prepared composites possess great microwave absorption (MA) performance with an expected absorption bandwidth (4.00 GHz) at the Ku band and a maximum reflection loss value (-67.77 dB), which is much better than the performance of conventional 2H-MoS₂ or 2H-MoS₂/RGO. The prominent absorption property is ascribed to the (i) unique self-assemble morphology of rose-like MoS₂ supported on 2D RGO; (ii) controllable crystalline phase switch between 2H and 1T; and (iii) brilliant energy attenuation caused by the intense multipolarization. Furthermore, the dominant MA mechanism is described as the local polarization motivated by the interaction between RGO and MoS₂. Thus, our novel structure design provides a necessary reference to achieve optimized absorption performance based on 2D materials.

Rolling up MoSe2 Nanomembranes as a Sensitive Tubular Photodetector

Transition metal dichalcogenides, as a kind of 2D material, are suitable for near-infrared to visible photodetection owing to the bandgaps ranging from 1.0 to 2.0 eV. However, limited light absorption restricts photoresponsivity due to the ultrathin thickness of 2D materials. 3D tubular structures offer a solution to solve the problem because of the light trapping effect which can enhance optical absorption. In this work, thanks to mechanical flexibility of 2D materials, self-rolled-up technology is applied to build up a 3D tubular structure and a tubular photodetector is realized based on the rolled-up molybdenum diselenide microtube. The tubular device is shown to present one order higher photosensitivity compared with planar counterparts. Enhanced optical absorption arising from the multiple reflections inside the tube is the main reason for the increased photocurrent. This tubular device offers a new design for increasing the efficiency of transition metal dichalcogenide-based photodetection and could hold great potential in the field of 3D optoelectronics.

High-Performance Photodiode Based on Atomically Thin WSe2 /MoS2 Nanoscroll Integration

Self-assembled structures of 2D materials with novel physical and chemical properties, such as the good electrical and optoelectrical performance in nanoscrolls, have attracted a lot of attention. However, high photoresponse speed as well as high responsivity cannot be achieved simultaneously in the nanoscrolls. Here, a photodiode consisting of single MoS₂ nanoscrolls and a p-type WSe₂ is demonstrated and shows excellent photovoltaic characteristics with a large open-circuit voltage of 0.18 V and high current intensity. Benefiting from the heterostructure, the dark current is suppressed resulting in an increased ratio of photocurrent to dark current (two orders of magnitude higher than the single MoS₂ nanoscroll device). Furthermore, it yields high responsivity of 0.3 A W^-1 (corresponding high external quantum efficiency of ≈75%) and fast response time of 5 ms, simultaneously. The response speed is increased by three orders of magnitude over the single MoS₂ nanoscroll device. In addition, broadband photoresponse up to near-infrared could be achieved. This atomically thin WSe₂ /MoS₂ nanoscroll integration not only overcomes the disadvantage of MoS₂ nanoscrolls, but also demonstrates a single nanoscroll-based heterostructure with high performance, promising its potential in the future optoelectronic applications.

Highly Promoted Carrier Mobility and Intrinsic Stability by Rolling Up Monolayer Black Phosphorus into Nanoscrolls

Rolling up two-dimensional (2D) materials into nanoscrolls could not only retain the excellent properties of their 2D hosts but also display intriguing physical and chemical properties that arise from their 1D tubular structures. Here, we report a new class of black phosphorus nanoscrolls (bPNSs), which are stable at room-temperature and energetically more favorable than 2D bP. Most strikingly, these bPNSs hold tunable direct band gaps and extremely high mobilities (e.g., the mobility of the double-layer bPNS is about 20-fold higher than that of 2D bP monolayer). Their unique self-encapsulation structure and layer-dependent conduction band minimum can largely prevent the entrance of O₂ and the production of O₂^- and thereby suppress the possible environmental degradation as well. The enhanced intrinsic stability and promoted electronic properties render bPNSs great promise in many advanced electronics or optoelectronics applications.