Highly Selective and Sensitive Detection of Pb2+ in Aqueous Solution Using Tetra(4-pyridyl)porphyrin-Functionalized Thermosensitive Ionic Microgels

Heterogenization of Ionic Liquid on Multiwalled Carbon Nanotubes for Lead(II) Ion Detection

The presence of lead(II) ion poses a significant threat to water systems due to their toxicity and potential health hazards. The detection of Pb2+ ions in contaminated water is very crucial. The ionic liquid functionalized multiwalled carbon nanotubes (IL@MWCNT) nanocomposite was fabricated using ionic liquid (IL) 1-methyl-3-(4-sulfobutyl)-imidazolium chloride and multiwalled carbon nanotubes (MWCNTs) for detection of lead(II) ions. It is a novel method to heterogenize the layer of IL on the surface of MWCNTs. The XPS and FTIR analyses confirm that the ionic liquid is not decomposed during annealing process. Moreover, the XRD analysis shows the presence of MWCNTs and carbon quantum dots (CQDs). The HRTEM results exhibit the aggregation of MWCNTs with IL, and formation of small distorted round shaped flakes of CQDs. Further, the successful heterogenization of IL on the surface of MWCNTs is also confirmed by TGA-DSC analysis. The quenching phenomenon of nanocomposite was observed by UV-Visible spectroscopy. The nanocomposite exhibits high performance for the selective detection of lead(II) ions in comparison to other metal ions. The presence of lead(II) ions eventually reduced the intensity of absorption. A limit of detection (LOD) of 9.16 nM was attained for Pb2+ ions in a concentration range of 0-20 nM.

Stimuli-directed selective detection of Cu2+ and Cr2O72- ions using a pH-responsive chitosan-poly(aminoamide) fluorescent microgel in aqueous media

In this work, the preparation of a pH-responsive fluorescent microgel, (NANO-PAMAM-CHT), is presented for the selective detection of Cu2+ and Cr2O72- ions. The NANO-PAMAM-CHT (nanosized polyaminoamide-chitosan microgel) is synthesized via aza-Michael addition reactions in a controlled and stepwise manner in water, using easily affordable starting materials like 1,4-diaminobutane, N,N'-methylene-bis-acrylamide, NIPAM and chitosan. NANO-PAMAM-CHT shows pH-responsive fluorescent properties, whereas the fluorescence intensity shows a pH-responsive change. Due to the selective fluorescence quenching, the microgel can detect both Cu2+ ions and Cr2O72- ions selectively at ambient pH in aqueous medium. Moreover, it can selectively differentiate between Cu2+ ion and Cr2O72- ions at pH ∼3 in water. The limits of detection for Cu2+ ions and Cr2O72- ions are reported as 16.9 μM and 2.62 μM, respectively (lower than the minimum allowed level in drinking water) at pH ∼7. Mechanistic study further reveals the dynamic quenching phenomenon in the presence of Cu2+ ions and static quenching in the presence of Cr2O72- ions.

The development of a paper-based distance sensor for the detection of Pb2+ assisted with the target-responsive DNA hydrogel

Due to the serious risks of lead pollution to human health, it plays a great role in constructing a simple, inexpensive, portable, and user-friendly strategy for Pb²⁺ detection in environmental samples. Herein, a paper-based distance sensor is developed to detect Pb²⁺ assisted with the target-responsive DNA hydrogel. Pb²⁺ can activate DNAzyme to cleave its substrate strand, which results in the hydrolysis of the DNA hydrogel. The released water molecules trapped in the hydrogel can flow along the patterned pH paper due to the capillary force. The water flow distance (WFD) is significantly influenced by the amount of water released from the collapsed DNA hydrogel triggered by the addition of various Pb²⁺ concentrations. In this way, Pb²⁺ can be quantitatively detected without using specialized instruments and labeled molecules, and the limit of detection (LOD) of Pb²⁺ is 3.0 nM. Additionally, the Pb²⁺ sensor works well in lake water and tap water. Overall, this simple, inexpensive, portable, and user-friendly method is very promising for quantitative and in-field detection of Pb²⁺ with excellent sensitivity and selectivity.

Durable Nanocellulose-Stabilized Emulsions of Dithizone/Chloroform in Water for Hg2+ Detection: A Novel Approach for a Classical Problem

The use of dithizone (DTZ) for colorimetric heavy-metal detection is approximately one century old. However, its pending stability issues and the need for simple indicators justify further research. Using cellulose nanofibers, we attained DTZ-containing emulsions with high stability. These emulsions had water (at least 95 wt %) and acetic acid (1-8 mL/L) conforming the continuous phase, while dispersed droplets of diameter <1 μm contained chloroform-solvated DTZ (3 wt %). The solvation cluster was computed by molecular dynamics simulations, suggesting that chloroform slightly reduces the dihedral angle between the two sides of the thiocarbazone chain. Nanocellulose concentrations over 0.2 wt % sufficed to obtain macroscopically homogeneous mixtures with no phase separation. Furthermore, the rate of degradation of DTZ in the nanocellulose-stabilized emulsion did not differ significantly from a DTZ/chloroform solution, outperforming DTZ/toluene and DTZ/acetonitrile. Not only is the emulsion readily and immediately responsive to mercury(II), but it also decreases interferences from other ions and from natural samples. Unexpectedly, neither lead(II) nor cadmium(II) triggered a visual response at trace concentrations. The limit of detection of these emulsions is 15 μM or 3 mg/L, exceeding WHO limits for mercury(II) in drinking water, but they could be effective at raising alarms.

Preparation and self-assembly of ionic (PNIPAM-co-VIM) microgels and their adsorption property for phosphate ions

Using N-isopropyl acrylamide (NIPAM) as the main monomer, 1-vinyl imidazole (VIM) containing tertiary amine groups as the functional comonomer, and 1,5-dibromo pentane as the crosslinking agent, ionic P(NIPAM-co-VIM) microgels were prepared by a two-step method. The crosslinking agent was reacted with tertiary amino groups by the quaternary amination. The results of zeta potential and particle size analysis showed that P(NIPAM-co-VIM) microgels were positively charged and had a particle size of about 400 nm, and the microgels with 11 wt% VIM still showed temperature sensitivity with a volume phase transition temperature of approximately 37.5 °C. The effects of VIM content, ambient temperature, and pH on the adsorption properties of the microgels for phosphate anions were explored. The self-assembly of the positively charged P(NIPAM-co-VIM) microgels with polyelectrolytes and the adsorption behavior of the layers for phosphate anions were studied using a quartz crystal microbalance (QCM). It was found that at a phosphate concentration of 0.3 mg mL^-1, VIM mass fraction of 11%, pH of 5, and temperature of 20 °C, the largest adsorption capacity of P(NIPAM-co-VIM) microgel on phosphate ions could reach 346.3 mg g^-1. The frequency responses of the microgel-modified QCM sensor could reach 3.0, 18.8, and 25.9 Hz when exposed to 10^-8, 10^-7, and 10^-6 M phosphate solutions. Therefore, the ionic (PNIPAM-co-VIM) microgels could be promising for fabricating anion-binding materials for separation and sensing applications.

Metal-Organic Frameworks with Novel Catenane-like Interlocking: Metal-Determined Photoresponse and Uranyl Sensing

The assembly of two tripyridinium-tricarboxylate ligands and different metal ions leads to seven isostructural MOFs, which show novel 2D→2D supramolecular entanglement featuring catenane-like interlocking of tricyclic cages. The MOFs show tripyridinium-afforded and metal-modulated photoresponsive properties. The MOFs with d¹⁰ metal centers (1-Cd, 1-Zn, 2-Cd, 2-Zn) show fast and reversible photochromism and concomitant fluorescence quenching, 1-Ni displays slower photochromism but does not fluoresce, and 1-Co and 2-Co are neither photochromic nor fluorescent. It is shown here that the network entanglement dictates donor-acceptor close contacts, which enable fluorescence originated from interligand charge transfer. The contacts also allow photoinduced electron transfer, which underlies photochromism and concomitant fluorescence response. The metal dependence in fluorescence and photochromism can be related to energy transfer through metal-centered d-d transitions. In addition, 1-Cd is demonstrated to be a potential fluorescence sensor for sensitive and selective detection of UO₂ ²⁺ in water.

Recent Advances in Porphyrin-Based Materials for Metal Ions Detection

Porphyrins have planar and conjugated structures, good optical properties, and other special functional properties. Owing to these excellent properties, in recent years, porphyrins and their analogues have emerged as a multifunctional platform for chemical sensors. The rich chemistry of these molecules offers many possibilities for metal ions detection. This review mainly discusses two types of molecular porphyrin and porphyrin composite sensors for metal ions detection, because porphyrins can be functionalized to improve their functional properties, which can introduce more chemical and functional sites. According to the different application materials, the section of porphyrin composite sensors is divided into five sub-categories: (1) porphyrin film, (2) porphyrin metal complex, (3) metal–organic frameworks, (4) graphene materials, and (5) other materials, respectively.

Large interlayer spacing Nb4C3T x (MXene) promotes the ultrasensitive electrochemical detection of Pb2+ on glassy carbon electrodes

A Nb4C3T x (MXene)-modified glassy carbon electrode was used for the electrochemical detection of Pb2+ ions in aqueous media. The sensing platform was evaluated by anodic stripping analysis after optimizing the influencing factors such as pH, deposition potential, and time. The large interlayer spacing, high c lattice parameter and higher conductivity of Nb4C3T x compared to other MXenes enhance the electrochemical detection of Pb2+. The developed sensor can reach a detection limit of 12 nM at a potential ∼-0.6 V. Additionally, the developed sensor showed promising selectivity in the presence of Cu2+ and Cd2+, and stability for at least 5 cycles of continuous measurements with good repeatability. This work demonstrates the potential applications of Nb4C3T x towards the development of effective electrochemical sensors.

Universal Antibacterial Surfaces Fabricated from Quaternary Ammonium Salt-Based PNIPAM Microgels

Because of the excellent film-forming ability of poly(N-isopropylacrylamide) (PNIPAM) microgel and high-efficient bactericidal property of quaternary ammonium salt (QAS), QAS-based PNIPAM (QAS-PNIPAM) microgels are synthesized and employed to modify the surface of a range of commonly used materials including metal, plastic, and elastomer. Bacterial culture is carried out on such QAS-PNIPAM microgel-modified surfaces to examine the viability of the attached bacteria. It is found that the bactericidal efficiency is nearly 100% on the modified surfaces of all the studied materials. We attribute the high-efficient bactericidal performance of QAS-PNIPAM microgel film to the QAS component rather than the topography of the microgel film itself. In addition, the microgel film is robust and shows great integrity even after culture of the bacteria and repeated rinses, and the cell experiment demonstrates that this microgel film is cyto-compatible. Therefore, such a simple, versatile method of preparing antibacterial films paves the way for future bactericidal applications.

Fluorometric determination of lead(II) by using aptamer-functionalized upconversion nanoparticles and magnetite-modified gold nanoparticles

A fluorescent nanoprobe for Pb(II) has been developed by employing aptamer-functionalized upconversion nanoparticles (UCNPs) and magnetic Fe₃O₄-modified (MNPs) gold nanoparticles (GNPs). First, aptamer-functionalized UCNPs and aptamer-functionalized magnetic GNPs were synthesized to obtained the fluorescent nanoprobe. The particles were combined by adding a complementary ssDNA. In the absence of Pb(II), the UCNPs, MNPs and GNPs are linked via complementary base pairing. This led to a decrease in the green upconversion fluorescence peaking at 547 nm (under 980 nm excitation). In the presence of Pb(II), the dsDNA between UCNPs and MNPs-GNPs is cleaved, and fluorescence recovers. This effect allows Pb(II) to be quantified, with a wide working range of 25-1400 nM and a lower detection limit of 5.7 nM. The nanoprobe gave satisfactory results when analyzing Pb(II) in tea and waste water. Graphical abstractSchematic representation of fluorescent nanoprobe based on fluorescence resonance energy transfer (FRET) between upconversion nanoparticles (UCNPs) and gold nanoparticles (GNPs)-Fe₃O₄ magnetic nanoparticles (MNPs) for detection of Pb²⁺.

Optical Detection of Fe3+ Ions in Aqueous Solution with High Selectivity and Sensitivity by Using Sulfasalazine Functionalized Microgels

A highly selective and sensitive optical sensor was developed to colorimetric detect trace Fe³⁺ ions in aqueous solution. The sensor was the sulfasalazine (SSZ) functionalized microgels (SSZ-MGs), which were fabricated via in-situ quaternization reaction. The obtained SSZ-MGs had hydrodynamic radius of about 259 ± 24 nm with uniform size distribution at 25 °C. The SSZ-MG aqueous suspensions can selectively and sensitively response to Fe³⁺ ions in aqueous solution at 25 °C and pH of 5.6, which can be quantified by UV-visible spectroscopy and also easily distinguished by the naked eye. Job’s plot indicated that the molar binding ratio of SSZ moiety in SSZ-MGs to Fe³⁺ was close to 1:1 with an apparent association constant of 1.72 × 10⁴ M⁻¹. A linear range of 0–12 μM with the detection limit of 0.110 μM (0.006 mg/L) was found. The obtained detection limit was much lower than the maximum allowance level of Fe³⁺ ions in drinking water (0.3 mg/L) regulated by the Environmental Protection Agency (EPA) of the United States. The existence of 19 other species of metal ions, namely, Ag⁺, Li⁺, Na⁺, K⁺, Ca²⁺, Ba²⁺, Cu²⁺, Ni²⁺, Mn²⁺, Pb²⁺, Zn²⁺, Cd²⁺, Co²⁺, Cr³⁺, Yb³⁺, La³⁺, Gd³⁺, Ce³⁺, and Bi³⁺, did not interfere with the detection of Fe³⁺ ions.

Linear Control of Moisture Permeability and Anti-adhesion of Bacteria in a Broad Temperature Region Realized by Cross-Linking Thermoresponsive Microgels onto Cotton Fabrics

Linear control of moisture permeability and anti-adhesion of bacteria in a broad temperature region are realized by cross-linking thermoresponsive microgels onto cotton fabrics. The microgels are copolymerized by monomers di(ethylene glycol) methyl ether methacrylate (MEO₂MA), (ethylene glycol) methyl ether methacrylate (OEGMA₃₀₀), and ethylene glycol methacrylate (EGMA) with a molar ratio of 10:10:1. Transition temperatures of PMEO₂MA and POEGMA₃₀₀ are 25 and 60 °C, respectively. Due to the compression of already collapsed PMEO₂MA to still swollen POEGMA₃₀₀, the microgels present a linear shrinkage in a broad temperature region (20-70 °C). Additionally, the contact angle of the microgels stays below 60° even if the temperature is increased to 50 °C, illustrating the reserved surface hydrophilicity. The obtained microgels are cross-linked onto cotton fabrics by 1,2,3,4-butanetetracarboxylic (BTCA). The weight gain ratios (WGRs) are 15% and 30%. The moisture permeability shows an excellent linear increase between 20 and 50 °C when the WGR is 30%, which is attributed to the linear shrinkage of the cross-linked microgels upon heating. Because the moisture permeability is related to the fabric comfort, a linear control of comfort is obtained. In addition, the cross-linked cotton fabrics can realize 96.5% bacterial anti-adhesion at 30 °C as the surface remains hydrophilic. On the basis of these two unique properties, the realized cotton fabrics cross-linked with microgels are promising for application as smart textiles for wound addressing.

Simple Fluorescence Turn-On Chemosensor for Selective Detection of Ba2+ Ion and Its Live Cell Imaging

A phenoxazine-based fluorescence chemosensor 4PB [(4-(tert-butyl)-N-(4-((4-((5-oxo-5H-benzo[a]phenoxazin-6-yl)amino)phenyl)sulfonyl)phenyl)benzamide)] was designed and synthesized by a simple synthetic methods. The 4PB fluorescence chemosensor selectively detects Ba²⁺ in the existence of other alkaline metal ions. In addition, 4PB showed high selectivity and sensitivity for Ba²⁺ detection. The detection limit of 4PB was 0.282 μM and the binding constant was 1.0 × 10⁶ M^-1 in CH₃CN/H₂O (97.5:2.5 v/v, HEPES = 1.25 mM, pH 7.3) medium. This chemosensor functioned through the intramolecular charge transfer (ICT) mechanism, which was further confirmed by DFT studies. Live cell imaging in MCF-7 cells confirmed the cell permeability of 4PB and its capability for specific detection of Ba²⁺ in living cells.