1
|
Shi Y, Yang X, Min J, Kong W, Hu X, Zhang J, Chen L. Advancements in culture technology of adipose-derived stromal/stem cells: implications for diabetes and its complications. Front Endocrinol (Lausanne) 2024; 15:1343255. [PMID: 38681772 PMCID: PMC11045945 DOI: 10.3389/fendo.2024.1343255] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Figures] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 11/23/2023] [Accepted: 03/29/2024] [Indexed: 05/01/2024] Open
Abstract
Stem cell-based therapies exhibit considerable promise in the treatment of diabetes and its complications. Extensive research has been dedicated to elucidate the characteristics and potential applications of adipose-derived stromal/stem cells (ASCs). Three-dimensional (3D) culture, characterized by rapid advancements, holds promise for efficacious treatment of diabetes and its complications. Notably, 3D cultured ASCs manifest enhanced cellular properties and functions compared to traditional monolayer-culture. In this review, the factors influencing the biological functions of ASCs during culture are summarized. Additionally, the effects of 3D cultured techniques on cellular properties compared to two-dimensional culture is described. Furthermore, the therapeutic potential of 3D cultured ASCs in diabetes and its complications are discussed to provide insights for future research.
Collapse
Affiliation(s)
- Yinze Shi
- Department of Endocrinology, Union Hospital, Tongji Medical College, Huazhong University of Science and Technology, Wuhan, China
- Hubei Provincial Clinical Research Center for Diabetes and Metabolic Disorders, Wuhan, China
| | - Xueyang Yang
- Department of Endocrinology, Union Hospital, Tongji Medical College, Huazhong University of Science and Technology, Wuhan, China
- Hubei Provincial Clinical Research Center for Diabetes and Metabolic Disorders, Wuhan, China
| | - Jie Min
- Department of Endocrinology, Union Hospital, Tongji Medical College, Huazhong University of Science and Technology, Wuhan, China
- Hubei Provincial Clinical Research Center for Diabetes and Metabolic Disorders, Wuhan, China
| | - Wen Kong
- Department of Endocrinology, Union Hospital, Tongji Medical College, Huazhong University of Science and Technology, Wuhan, China
- Hubei Provincial Clinical Research Center for Diabetes and Metabolic Disorders, Wuhan, China
| | - Xiang Hu
- Department of Endocrinology, Union Hospital, Tongji Medical College, Huazhong University of Science and Technology, Wuhan, China
- Hubei Provincial Clinical Research Center for Diabetes and Metabolic Disorders, Wuhan, China
| | - Jiaoyue Zhang
- Department of Endocrinology, Union Hospital, Tongji Medical College, Huazhong University of Science and Technology, Wuhan, China
- Hubei Provincial Clinical Research Center for Diabetes and Metabolic Disorders, Wuhan, China
| | - Lulu Chen
- Department of Endocrinology, Union Hospital, Tongji Medical College, Huazhong University of Science and Technology, Wuhan, China
- Hubei Provincial Clinical Research Center for Diabetes and Metabolic Disorders, Wuhan, China
| |
Collapse
|
2
|
Hu X, Wang T, Li F, Mao X. Surface modifications of biomaterials in different applied fields. RSC Adv 2023; 13:20495-20511. [PMID: 37435384 PMCID: PMC10331796 DOI: 10.1039/d3ra02248j] [Citation(s) in RCA: 9] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/05/2023] [Accepted: 06/26/2023] [Indexed: 07/13/2023] Open
Abstract
Biomaterial implantation into the human body plays a key role in the medical field and biological applications. Increasing the life expectancy of biomaterial implants, reducing the rejection reaction inside the human body and reducing the risk of infection are the problems in this field that need to be solved urgently. The surface modification of biomaterials can change the original physical, chemical and biological properties and improve the function of materials. This review focuses on the application of surface modification techniques in various fields of biomaterials reported in the past few years. The surface modification techniques include film and coating synthesis, covalent grafting, self-assembled monolayers (SAMs), plasma surface modification and other strategies. First, a brief introduction to these surface modification techniques for biomaterials is given. Subsequently, the review focuses on how these techniques change the properties of biomaterials, and evaluates the effects of modification on the cytocompatibility, antibacterial, antifouling and surface hydrophobic properties of biomaterials. In addition, the implications for the design of biomaterials with different functions are discussed. Finally, based on this review, it is expected that the biomaterials have development prospects in the medical field.
Collapse
Affiliation(s)
- Xi Hu
- State Key Laboratory of Ultrasound in Medicine and Engineering College of Biomedical Engineering, Chongqing Medical University Chongqing 400016 P. R. China
- Chongqing Key Laboratory of Biomedical Engineering, College of Biomedical Engineering, Chongqing Medical University Chongqing 400016 P. R. China
| | - Teng Wang
- State Key Laboratory of Ultrasound in Medicine and Engineering College of Biomedical Engineering, Chongqing Medical University Chongqing 400016 P. R. China
- Chongqing Key Laboratory of Biomedical Engineering, College of Biomedical Engineering, Chongqing Medical University Chongqing 400016 P. R. China
| | - Faqi Li
- State Key Laboratory of Ultrasound in Medicine and Engineering College of Biomedical Engineering, Chongqing Medical University Chongqing 400016 P. R. China
- Chongqing Key Laboratory of Biomedical Engineering, College of Biomedical Engineering, Chongqing Medical University Chongqing 400016 P. R. China
| | - Xiang Mao
- State Key Laboratory of Ultrasound in Medicine and Engineering College of Biomedical Engineering, Chongqing Medical University Chongqing 400016 P. R. China
- Chongqing Key Laboratory of Biomedical Engineering, College of Biomedical Engineering, Chongqing Medical University Chongqing 400016 P. R. China
| |
Collapse
|
3
|
Saravanou SF, Ioannidis K, Dimopoulos A, Paxinou A, Kounelaki F, Varsami SM, Tsitsilianis C, Papantoniou I, Pasparakis G. Dually crosslinked injectable alginate-based graft copolymer thermoresponsive hydrogels as 3D printing bioinks for cell spheroid growth and release. Carbohydr Polym 2023; 312:120790. [PMID: 37059530 DOI: 10.1016/j.carbpol.2023.120790] [Citation(s) in RCA: 15] [Impact Index Per Article: 15.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/01/2022] [Revised: 03/01/2023] [Accepted: 03/05/2023] [Indexed: 03/12/2023]
Abstract
In this work a dual crosslinked network based on sodium alginate graft copolymer, bearing poly(N-isopropylacrylamide-co-N-tert-butylacrylamide) P(NIPAM-co-NtBAM) side chains was developed and examined as a shear thinning soft gelating bioink. The copolymer was found to undergo a two-step gelation mechanism; in the first step a three-dimensional (3D) network is formed through ionic interactions between the negatively ionized carboxylic groups of the alginate backbone and the positive charges of Ca2+ divalent cations, according to the "egg-box" mechanism. The second gelation step occurs upon heating which triggers the hydrophobic association of the thermoresponsive P(NIPAM-co-NtBAM) side chains, increasing the network crosslinking density in a highly cooperative manner. Interestingly, the dual crosslinking mechanism resulted in a five-to-eight-fold improvement of the storage modulus implying reinforced hydrophobic crosslinking above the critical thermo-gelation temperature which is further boosted by the ionic crosslinking of the alginate backbone. The proposed bioink could form arbitrary geometries under mild 3D printing conditions. Last, it is demonstrated that the proposed developed bioink can be further utilized as bioprinting ink and showcased its ability to promote human periosteum derived cells (hPDCs) growth in 3D and their capacity to form 3D spheroids. In conclusion, the bioink, owing its ability to reverse thermally the crosslinking of its polymer network, can be further utilized for the facile recovery of the cell spheroids, implying its promising potential use as cell spheroid-forming template bionk for applications in 3D biofabrication.
Collapse
|
4
|
Di Stefano AB, Urrata V, Trapani M, Moschella F, Cordova A, Toia F. Systematic review on spheroids from adipose‐derived stem cells: Spontaneous or artefact state? J Cell Physiol 2022; 237:4397-4411. [PMID: 36209478 PMCID: PMC10091738 DOI: 10.1002/jcp.30892] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/11/2022] [Revised: 09/16/2022] [Accepted: 09/22/2022] [Indexed: 11/09/2022]
Abstract
Three-dimensional (3D) cell cultures represent the spontaneous state of stem cells with specific gene and protein molecular expression that are more alike the in vivo condition. In vitro two-dimensional (2D) cell adhesion cultures are still commonly employed for various cellular studies such as movement, proliferation and differentiation phenomena; this procedure is standardized and amply used in laboratories, however their representing the original tissue has recently been subject to questioning. Cell cultures in 2D require a support/substrate (flasks, multiwells, etc.) and use of fetal bovine serum as an adjuvant that stimulates adhesion that most likely leads to cellular aging. A 3D environment stimulates cells to grow in suspended aggregates that are defined as "spheroids." In particular, adipose stem cells (ASCs) are traditionally observed in adhesion conditions, but a recent and vast literature offers many strategies that obtain 3D cell spheroids. These cells seem to possess a greater ability in maintaining their stemness and differentiate towards all mesenchymal lineages, as demonstrated in in vitro and in vivo studies compared to adhesion cultures. To date, standardized procedures that form ASC spheroids have not yet been established. This systematic review carries out an in-depth analysis of the 76 articles produced over the past 10 years and discusses the similarities and differences in materials, techniques, and purposes to standardize the methods aimed at obtaining ASC spheroids as already described for 2D cultures.
Collapse
Affiliation(s)
- Anna Barbara Di Stefano
- BIOPLAST‐Laboratory of BIOlogy and Regenerative Medicine‐PLASTic Surgery, Plastic and Reconstructive Surgery Unit, Department of Surgical, Oncological and Oral Sciences University of Palermo Palermo Italy
| | - Valentina Urrata
- BIOPLAST‐Laboratory of BIOlogy and Regenerative Medicine‐PLASTic Surgery, Plastic and Reconstructive Surgery Unit, Department of Surgical, Oncological and Oral Sciences University of Palermo Palermo Italy
| | - Marco Trapani
- BIOPLAST‐Laboratory of BIOlogy and Regenerative Medicine‐PLASTic Surgery, Plastic and Reconstructive Surgery Unit, Department of Surgical, Oncological and Oral Sciences University of Palermo Palermo Italy
| | - Francesco Moschella
- BIOPLAST‐Laboratory of BIOlogy and Regenerative Medicine‐PLASTic Surgery, Plastic and Reconstructive Surgery Unit, Department of Surgical, Oncological and Oral Sciences University of Palermo Palermo Italy
| | - Adriana Cordova
- BIOPLAST‐Laboratory of BIOlogy and Regenerative Medicine‐PLASTic Surgery, Plastic and Reconstructive Surgery Unit, Department of Surgical, Oncological and Oral Sciences University of Palermo Palermo Italy
- Department of Surgical, Oncological and Oral Sciences, Unit of Plastic and Reconstructive Surgery University of Palermo Palermo Italy
- Department of D.A.I. Chirurgico, Plastic and Reconstructive Unit Azienda Ospedaliera Universitaria Policlinico “Paolo Giaccone” Palermo Italy
| | - Francesca Toia
- BIOPLAST‐Laboratory of BIOlogy and Regenerative Medicine‐PLASTic Surgery, Plastic and Reconstructive Surgery Unit, Department of Surgical, Oncological and Oral Sciences University of Palermo Palermo Italy
- Department of Surgical, Oncological and Oral Sciences, Unit of Plastic and Reconstructive Surgery University of Palermo Palermo Italy
- Department of D.A.I. Chirurgico, Plastic and Reconstructive Unit Azienda Ospedaliera Universitaria Policlinico “Paolo Giaccone” Palermo Italy
| |
Collapse
|
5
|
Chiang YC, Yeh HW, Hu SM, Wu CY, Wu TY, Chen CH, Liao PC, Guan ZY, Cheng NC, Chen HY. Vapor construction and modification of stem cell-laden multicomponent scaffolds for regenerative therapeutics. Mater Today Bio 2022; 13:100213. [PMID: 35198961 PMCID: PMC8850674 DOI: 10.1016/j.mtbio.2022.100213] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/06/2021] [Revised: 01/27/2022] [Accepted: 02/04/2022] [Indexed: 01/08/2023]
Abstract
Tissue engineering based on the combined use of isolated cells, scaffolds, and growth factors is widely used; however, the manufacture of cell-preloaded scaffolds faces challenges. Herein, we fabricated a multicomponent scaffold with multiple component accommodations, including bioactive molecules (BMs), such as fibroblast growth factor-2 (FGF-2) and l-ascorbic acid 2-phosphate (A2-P), and living cells of human adipose-derived stem cells (hASCs), within one scaffold construct. We report an innovative fabrication process based on vapor-phased construction using iced templates for vapor sublimation. Simultaneously, the vaporized water molecules were replaced by vapor deposition of poly-p-xylylene (PPX, USP Class VI, highly compatible polymer, FDA-approved records), forming a three-dimensional and porous scaffold matrix. More importantly, a multicomponent modification was achieved based on using nonvolatile solutes, including bioactive molecules of FGF-2 and A2-P, and living cells of hASCs, to prepare iced templates for sublimation. Additionally, the fabrication and construction resulted in a multicomponent scaffold product comprising the devised molecules, cells, and vapor-polymerized poly-p-xylylene as the scaffold matrix. The clean and dry fabrication process did not require catalysts, initiators or plasticizers, and potentially harmful solvents, and the scaffold products were produced in simple steps within hours of the processing time. Cell viability analysis showed a high survival rate (approximately 86.4%) for the accommodated hASCs in the fabricated scaffold product, and a surprising multilineage differentiation potential of hASCs was highly upregulated because of synergistic guidance by the same accommodated FGF-2 and A2-P components. Proliferation and self-renewal activities were also demonstrated with enhancement of the multicomponent scaffold product. Finally, in vivo calvarial defect studies further revealed that the constructed scaffolds provided blood vessels to grow into the bone defect areas with enhancement, and the induced conduction of osteoblast growth also promoted bone healing toward osseointegration. The reported scaffold construction technology represents a prospective tissue engineering scaffold product to enable accommodable and customizable versatility to control the distribution and composition of loading delicate BMs and living hASCs in one scaffold construct and demonstrates unlimited applications in tissue engineering repair and regenerative medicine applications.
Collapse
Affiliation(s)
- Yu-Chih Chiang
- School of Dentistry, Graduate Institute of Clinical Dentistry, National Taiwan University and National Taiwan University Hospital, Taipei, 10048, Taiwan
- Molecular Imaging Center, National Taiwan University, Taipei, 10617, Taiwan
- School of Dentistry, Colleage of Dental Medicine, Kaohsiung Medical University, Kaohsiung, 80708, Taiwan
| | - Hsiao-Wen Yeh
- School of Dentistry, Graduate Institute of Clinical Dentistry, National Taiwan University and National Taiwan University Hospital, Taipei, 10048, Taiwan
- Department of Dentistry, Tri-Service General Hospital, National Defense Medical Center, Taipei, 11490, Taiwan
| | - Shu-Man Hu
- Department of Chemical Engineering, National Taiwan University, Taipei, 10617, Taiwan
| | - Chih-Yu Wu
- Department of Chemical Engineering, National Taiwan University, Taipei, 10617, Taiwan
- Molecular Imaging Center, National Taiwan University, Taipei, 10617, Taiwan
- Corresponding author. Department of Chemical Engineering, National Taiwan University, Taipei 10617, Taiwan.
| | - Ting-Ying Wu
- Department of Chemical Engineering, National Taiwan University, Taipei, 10617, Taiwan
| | - Chi-Hung Chen
- School of Dentistry, Graduate Institute of Clinical Dentistry, National Taiwan University and National Taiwan University Hospital, Taipei, 10048, Taiwan
| | - Pei-Chun Liao
- Department of Chemical Engineering, National Taiwan University, Taipei, 10617, Taiwan
| | - Zhen-Yu Guan
- Department of Chemical Engineering, National Taiwan University, Taipei, 10617, Taiwan
| | - Nai-Chen Cheng
- Department of Surgery, National Taiwan University Hospital and College of Medicine, Taipei, 10002, Taiwan
- Corresponding author.
| | - Hsien-Yeh Chen
- Department of Chemical Engineering, National Taiwan University, Taipei, 10617, Taiwan
- Molecular Imaging Center, National Taiwan University, Taipei, 10617, Taiwan
- Corresponding author. Department of Chemical Engineering, National Taiwan University, Taipei, 10617, Taiwan.
| |
Collapse
|
6
|
Cho Y, Baek J, Lee E, Im SG. Heparin-mediated electrostatic immobilization of bFGF via functional polymer films for enhanced self-renewal of human neural stem cells. J Mater Chem B 2021; 9:2084-2091. [PMID: 33595038 DOI: 10.1039/d0tb02799e] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Preserving the self-renewal capability of undifferentiated human neural stem cells (hNSCs) is one of the crucial prerequisites for efficient hNSC-based regenerative medicine. Considering that basic fibroblast growth factor (bFGF) is one of the key contributing factors in maintaining the self-renewal property of hNSCs, the bioactivity and stability of bFGF in the hNSC culture should be regulated carefully. In this study, we developed a functional polymer film of poly(glycidyl methacrylate (GMA)-co-N,N-dimethylaminoethyl methacrylate (DMAEMA)) (coGD, or p(GMA-co-DMAEMA)) via initiated chemical vapor deposition (iCVD), which facilitated a stable, electrostatic adsorption of heparin and subsequent immobilization of bFGF. The bFGF-immobilized coGD surface substantially enhanced the proliferation rate and neurosphere forming ability of hNSCs compared to tissue culture plate (TCP). The expression of the stemness markers of hNSCs such as NESTIN and SOX-2 was also upregulated prominently on the coGD surface. Also, the hNSCs cultured on the coGD surface showed enhanced neurogenesis upon spontaneous differentiation. The immobilized bFGF on the coGD surface stimulated the expression of bFGF receptors and subsequently activated the mitogen-activated protein kinase (MAPK) pathway, attributed to the increase in self-renewal property of hNSCs. Our results indicate that the coGD surface allowed in situ heparin-mediated bFGF immobilization, which served as a robust platform to generate hNSC neurospheres with enhanced self-renewal and differentiation capabilities and thereby will prompt an advance in the field of therapeutics of neurodegenerative diseases.
Collapse
Affiliation(s)
- Younghak Cho
- Department of Chemical and Biomolecular Engineering & KI for NanoCentury, Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Daejeon 34141, Republic of Korea.
| | - Jieung Baek
- Department of Chemical and Biomolecular Engineering, University of California, Berkeley, Berkeley, CA 94720, USA
| | - Eunjung Lee
- Department of Chemical and Biomolecular Engineering & KI for NanoCentury, Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Daejeon 34141, Republic of Korea.
| | - Sung Gap Im
- Department of Chemical and Biomolecular Engineering & KI for NanoCentury, Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Daejeon 34141, Republic of Korea.
| |
Collapse
|
7
|
Yang YC, Huang WS, Hu SM, Huang CW, Chiu CH, Chen HY. Synergistic and Regulatable Bioremediation Capsules Fabrication Based on Vapor-Phased Encapsulation of Bacillus Bacteria and its Regulator by Poly- p-Xylylene. Polymers (Basel) 2020; 13:polym13010041. [PMID: 33374286 PMCID: PMC7795076 DOI: 10.3390/polym13010041] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/30/2020] [Revised: 12/17/2020] [Accepted: 12/22/2020] [Indexed: 02/03/2023] Open
Abstract
A regulatable bioremediation capsule material was synthesized with isolated single-strain bacteria (Bacillus species, B. CMC1) and a regulator molecule (carboxymethyl cellulose, CMC) by a vapor-phased encapsulation method with simple steps of water sublimation and poly-p-xylylene deposition in chemical vapor deposition (CVD) process. Mechanically, the capsule construct exhibited a controllable shape and dimensions, and was composed of highly biocompatible poly-p-xylylene as the matrix with homogeneously distributed bacteria and CMC molecules. Versatility of the encapsulation of the molecules at the desired concentrations was achieved in the vapor-phased sublimation and deposition fabrication process. The discovery of the fabricated capsule revealed that viable living B. CMC1 inhabited the capsule, and the capsule enhanced bacterial growth due to the materials and process used. Biologically, the encapsulated B. CMC1 demonstrated viable and functional enzyme activity for cellulase activation, and such activity was regulatable and proportional to the concentration of the decorated CMC molecules in the same capsule construct. Impressively, 13% of cellulase activity increase was realized by encapsulation of B. CMC1 by poly-p-xylylene, and a further 34% of cellulase activity increase was achieved by encapsulation of additional 2.5% CMC. Accordingly, this synergistic effectiveness of the capsule constructs was established by combining enzymatic B. CMC1 bacteria and its regulatory CMC by poly-p-xylylene encapsulation process. This reported encapsulation process exhibited other advantages, including the use of simple steps and a dry and clean process free of harmful chemicals; most importantly, the process is scalable for mass production. The present study represents a novel method to fabricate bacteria-encapsulated capsule for cellulose degradation in bioremediation that can be used in various applications, such as wastewater treatment and transforming of cellulose into glucose for biofuel production. Moreover, the concept of this vapor-phased encapsulation technology can be correspondingly used to encapsulate multiple bacteria and regulators to enhance the specific enzyme functions for degradation of various organic matters.
Collapse
Affiliation(s)
- Yen-Ching Yang
- Department of Chemical Engineering, National Taiwan University, Taipei 10617, Taiwan; (Y.-C.Y.); (S.-M.H.); (C.-W.H.)
| | - Wei-Shen Huang
- Institute of Oceanography, National Taiwan University, Taipei 10617, Taiwan;
| | - Shu-Man Hu
- Department of Chemical Engineering, National Taiwan University, Taipei 10617, Taiwan; (Y.-C.Y.); (S.-M.H.); (C.-W.H.)
| | - Chao-Wei Huang
- Department of Chemical Engineering, National Taiwan University, Taipei 10617, Taiwan; (Y.-C.Y.); (S.-M.H.); (C.-W.H.)
| | - Chih-Hao Chiu
- Department of Orthopedic Surgery, Chang Gung Memorial Hospital, Taoyuan 33378, Taiwan
- Bone and Joint Research Center, Chang Gung Memorial Hospital, Linkou 33305, Taiwan
- Correspondence: (C.-H.C.); (H.-Y.C.); Tel.: +886-2-33669476 (H.-Y.C.)
| | - Hsien-Yeh Chen
- Department of Chemical Engineering, National Taiwan University, Taipei 10617, Taiwan; (Y.-C.Y.); (S.-M.H.); (C.-W.H.)
- Molecular Imaging Center, National Taiwan University, Taipei 10617, Taiwan
- Advanced Research Center for Green Materials Science and Technology, National Taiwan University, Taipei 10617, Taiwan
- Correspondence: (C.-H.C.); (H.-Y.C.); Tel.: +886-2-33669476 (H.-Y.C.)
| |
Collapse
|
8
|
Fitzgerald SJ, Cobb JS, Janorkar AV. Comparison of the formation, adipogenic maturation, and retention of human adipose-derived stem cell spheroids in scaffold-free culture techniques. J Biomed Mater Res B Appl Biomater 2020; 108:3022-3032. [PMID: 32396702 PMCID: PMC8506838 DOI: 10.1002/jbm.b.34631] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/20/2020] [Revised: 04/16/2020] [Accepted: 04/19/2020] [Indexed: 11/02/2023]
Abstract
While three-dimensional spheroids outperform traditional two-dimensional monolayer culture for human adipose-derived stem cells (hASCs), there is not a consensus on the most successful method for enhancing their adipogenic differentiation and minimizing the loss of physiologically relevant, fatty spheroids during culture. To this end, we compared three culture methods, namely, elastin-like polypeptide-polyethyleneimine (ELP-PEI) coated surfaces, ultra-low attachment static culture, and suspension culture for their ability to form and retain productive hASC spheroids. The ELP-PEI coatings used the ELP conjugated to two molecular weights of PEI (800 or 25,000 g/mol). FTIR spectroscopy, atomic force microscopy, and contact angle goniometry revealed that the ELP-PEI coatings had similar chemical structures, surface topography, and hydrophobicity. Time-lapse microscopy showed that increasing the PEI molecular weight resulted in smaller spheroids. Measurement of triglyceride content showed that the three methods induced comparable differentiation of hASCs toward the adipogenic lineage. DNA content and morphometric analysis revealed merging of spheroids to form larger spheroids in the ultra-low attachment static culture and suspension culture methods. In contrast, the retention of hASC spheroid sizes and numbers with a regular spheroid size (~100 μm) were best atop the ELP-PEI800 coatings. Overall, this research shows that the spheroid culture atop the ELP-PEI coatings is a suitable cell culture model for future studies involving long-term, three-dimensional culture of mature adipocytes derived from hASCs.
Collapse
Affiliation(s)
- Sarah J. Fitzgerald
- Biomedical Materials Science, School of Dentistry, University of Mississippi Medical Center, 2500 N State St, Jackson, MS 39216
| | - Jared S. Cobb
- Biomedical Materials Science, School of Dentistry, University of Mississippi Medical Center, 2500 N State St, Jackson, MS 39216
| | - Amol V. Janorkar
- Biomedical Materials Science, School of Dentistry, University of Mississippi Medical Center, 2500 N State St, Jackson, MS 39216
| |
Collapse
|
9
|
Chiang YC, Ho CP, Wang YL, Chen PC, Wang PY, Chen HY. Vapor-Deposited Reactive Coating with Chemically and Topographically Erasable Properties. Polymers (Basel) 2019; 11:E1595. [PMID: 31569561 PMCID: PMC6835693 DOI: 10.3390/polym11101595] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/08/2019] [Revised: 09/21/2019] [Accepted: 09/26/2019] [Indexed: 11/21/2022] Open
Abstract
An erasable coating was prepared to modify material surfaces with accessibilities, including specific conjugation, elimination of the conjugated chemistry/function, and the reactivation of a second new chemistry/function. The coating was realized based on a vapor-deposited functional poly-p-xylylene coating composed of an integrated 3-((3-methylamido)-disulfanyl)propanoic acid functional group, resulting in not only chemical reactivity, but also a disulfide interchange mechanism. Mechanically, the coating was robust in terms of the thermal stability and adhesive property on a variety of substrate materials. Chemically, the anchoring site of carboxylic acid was accessible for specific conjugation, and a disulfide bridge moiety was used to disengage already installed functions/properties. In addition, the homogeneous nature of the vapor-phased coating technique is known for its morphology/thickness and distribution of the functional moiety, which allowed precision to address the installation or erasure of functions and properties. Characterization of the precisely confined hydrophilic/hydrophobic wetting property and the alternating reversibility of this wetting property on the same surface was achieved.
Collapse
Affiliation(s)
- Yu-Chih Chiang
- School of Dentistry, Graduate Institute of Clinical Dentistry, National Taiwan University and National Taiwan University Hospital, Taipei 10048, Taiwan
| | - Cuei-Ping Ho
- Department of Chemical Engineering, National Taiwan University, Taipei 10617, Taiwan
| | - Yin-Lin Wang
- School of Dentistry, Graduate Institute of Clinical Dentistry, National Taiwan University and National Taiwan University Hospital, Taipei 10048, Taiwan
| | - Po-Chun Chen
- Institute of Materials Science and Engineering, National Taipei University of Technology, Taipei 10608, Taiwan;
| | - Peng-Yuan Wang
- Center for Human Tissues and Organs Degeneration, Institute of Biomedicine and Biotechnology, Shenzhen Institutes of Advanced Technology, Chinese Academy of Sciences, Shenzhen 518055, China
- Department of Chemistry and Biotechnology, Swinburne University of Technology, Victoria 3122, Australia
| | - Hsien-Yeh Chen
- Department of Chemical Engineering, National Taiwan University, Taipei 10617, Taiwan
- Advanced Research Center for Green Materials Science and Technology, National Taiwan University, Taipei 10617, Taiwan
| |
Collapse
|