Amorphous Flowerlike Goethite FeOOH Hierarchical Supraparticles: Superior Capability for Catalytic Hydrogenation of Nitroaromatics in Water

Recent Advances of Seed-Mediated Growth of Metal Nanoparticles: from Growth to Applications

Unprecedented advances in metal nanoparticle synthesis have paved the way for broad applications in sensing, imaging, catalysis, diagnosis, and therapy by tuning the optical properties, enhancing catalytic performance, and improving chemical and biological properties of metal nanoparticles. The central guiding concept for regulating the size and morphology of metal nanoparticles is identified as the precise manipulation of nucleation and subsequent growth, often known as seed-mediated growth methods. However, since the growth process is sensitive not only to the metal seeds but also to capping agents, metal precursors, growth solution, growth/incubation time, reductants, and other influencing factors, the precise control of metal nanoparticle morphology is multifactorial. Further, multiple reaction parameters are entangled with each other, so it is necessary to clarify the mechanism by which each factor precisely regulates the morphology of metal nanoparticles. In this review, to exploit the generality and extendibility of metal nanoparticle synthesis, the mechanisms of growth influencing factors in seed-mediated growth methods are systematically summarized. Second, a variety of critical properties and applications enabled by grown metal nanoparticles are focused upon. Finally, the current progress and offer insights on the challenges, opportunities, and future directions for the growth and applications of grown metal nanoparticles are reviewed.

Electrocatalytic reduction of 4-nitrophenol over Ni-MOF/NF: understanding the self-enrichment effect of H-bonds

The chemical adsorption and active sites play a key role in electrocatalysis, so Ni-MOF/nickel foam was fabricated for efficiently reducing 4-nitrophenol (4-NP) without any sacrificial agents. The coordinated water molecules induced the formation of hydrogen bonds (H-bonds) with the nitro group, contributing to the self-enrichment of 4-NP. The reaction rate reached 0.351 μmol min^-1 mg^-1. Therefore, this work provides a new insight into the H-bond effect in the field of electrocatalysis.

Structural Variation of Precipitates Formed by Fe(II) Oxidation and Impact on the Retention of Phosphate

The oxidation-precipitation process of Fe(II) is ubiquitous in the environment and critically affects the fate of contaminants and nutrients in natural systems where Fe(II) is present. Here, we explored the effect of H₂O₂ concentration on the structure of precipitates formed by Fe(II) oxidation and compared the precipitates to those formed by Fe(III) hydrolysis. Additionally, the phosphate retention under different H₂O₂ concentrations was evaluated. XRD, TEM, PDA, XPS, and UV-visible absorbance spectroscopy were used to characterize the structure of the formed precipitates; UV-visible absorbance spectroscopy was also used to determine the residual phosphate and Fe(II) in solution. It was found that the predominant precipitates in Fe(II) solution changed from planar-shaped crystalline lepidocrocite (γ-FeOOH) to poor short-range order (poorly crystalline) spherical-shaped hydrous ferric oxide (HFO) with increasing H₂O₂ concentrations. Although the HFO precipitates formed from Fe(II) resembled those formed from Fe(III) hydrolysis, the former was larger and had clearer lattice fringes. During the formation of γ-FeOOH, both Fe(II)-Fe(III) complexes and ligand-to-metal charge transfer processes were observed, and it was found that Fe(II) was present in the planar-shaped precipitates. Fe(II) might be present in the interior of precipitates as Fe(OH)₂, which could serve as a nucleus for the epitaxial growth of γ-FeOOH. In addition, the extent of phosphate retention increased with the H₂O₂ concentration, indicating the increased reactivity of formed precipitates with H₂O₂ concentration. More phosphate was retained via coprecipitation with Fe than adsorption on the preformed Fe precipitates due to the incorporation of phosphate within the structure of the formed Fe hydroxyphosphate via coprecipitation.

Simultaneous Nitrite Resourcing and Mercury Ion Removal Using MXene-Anchored Goethite Heterogeneous Fenton Composite

The integrated system of gas-phase advanced oxidation process combined with sulfite-based wet absorption process is a desirable method for simultaneous removal of SO₂, NO, and Hg⁰, but due to the enrichment of nitrite and Hg²⁺, resourcing harmless wastewater is still a challenge. To tackle this problem, this study fabricated a bifunctional β-FeOOH@MXene heterogeneous Fenton material, of which the crystalline phase, morphology, structure, and composition were revealed by using X-ray diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy-energy dispersive x-ray spectroscopy, and transmission electron microscopy. It exhibits excellent performance on nitrite oxidation (99.5%) and Hg²⁺ removal (99.7%) and can maintain stable outstanding ability after 13 cycles, with superior Hg²⁺ adsorption capacity (395 mg/g) and ultralow Fe leaching loss (<0.018 wt %). The synergism between MXene and β-FeOOH appears as follows: (i) MXene, as an inductive agent, directionally converted Fe₂O₃ into β-FeOOH in the hydrothermal method and greatly reduced its monomer size; (ii) the introduced ≡Ti(III)/≡Ti(II) accelerated the regeneration of ≡Fe(II) via rapid electron transfer, thereby improving the heterogeneous Fenton reaction; and (iii) MXene strongly immobilized β-FeOOH to greatly inhibit Fe-leaching. HO^•, ^•O₂^--, and ¹O₂ were the main radicals identified by electron spin resonance. Radical quenching tests showed their contributions to NO₂^- oxidation in the descending order HO^• > ¹O₂ > ^•O₂^-. Quantum chemical calculations revealed that ^•OH-induced oxidation of NO₂^- or HNO₂ was the primary reaction path. Density functional theory calculations combined with X-ray photoelectron spectroscopy and Raman characterizations displayed the Hg²⁺ removal mechanism, with Hg₂Cl₂, HgCl₂, and HgO as the main byproducts. This novel material provides a new strategy for resourcing harmless wastewater containing nitrite and Hg²⁺.

Multimodal Enzyme-Carrying Suprastructures for Rapid and Sensitive Biocatalytic Cascade Reactions

Colloidal assemblies of mesoporous suprastructures provide effective catalysis in an advantageous volume-confined environment. However, typical fabrication methods of colloidal suprastructures are carried out under toxic or harmful conditions for unstable biomolecules, such as, biocatalytic enzymes. For this reason, biocatalytic enzymes have rarely been used with suprastructures, even though biocatalytic cascade reactions in confined environments are more efficient than in open conditions. Here, multimodal enzyme- and photocatalyst-carrying superstructures with efficient cascade reactions for colorimetric glucose detection are demonstrated. The suprastructures consisting of various functional nanoparticles, including enzyme-carrying nanoparticles, are fabricated by surface-templated evaporation driven suprastructure synthesis on polydimethylsiloxane-grafted surfaces at ambient conditions. For the fabrication of suprastructures, no additional chemicals and reactions are required, which allows maintaining the enzyme activities. The multimodal enzymes (glucose oxidase and peroxidase)-carrying suprastructures exhibit rapid and highly sensitive glucose detection via two enzyme cascade reactions in confined geometry. Moreover, the combination of enzymatic and photocatalytic cascade reactions of glucose oxidase to titanium dioxide nanoparticles is successfully realized for the same assay. These results show promising abilities of multiple colloidal mixtures carrying suprastructures for effective enzymatic reactions and open a new door for advanced biological reactions and enzyme-related works.

Tunable Assembly of Organic-Inorganic Molecules into Hierarchical Superstructures as Ligase Mimics for Enhancing Tumor Photothermal Therapy

The assembly of molecules into hierarchical superstructures is ubiquitous in the construction of novel geometrically complex hierarchical superstructures, attracting great attention. Herein, a metal-ligand cross-linking strategy is developed for the fabrication of ferric ion-dopamine coordination hierarchical superstructures. A range of superstructures with highly complex morphologies, such as flower-like, octopus-like, and hedgehog-like superstructures, are synthesized. The mechanism for formation of hierarchical superstructures involves the pre-cross-linking of ferric ion with dopamine molecules, the fabrication of iron-dopamine precursors aggregated into the spherical aggregates, the nanoscale aggregates sintering and ordering themselves upon equilibration, the nanodots polymerizing into nanorods, and finally the nanorods self-assembling into hierarchical superstructures. In-depth research illustrates that as the permittivity (ξ) of the reaction system increases, the resulting hierarchical superstructures tend to converge into spherical shape. As a proof of concept, the 0D nanospheres, 1D nanorods, and 3D hierarchical superstructures are fabricated through adjusting system permittivity. The hierarchical superstructure is utilized as peroxidase-like ligase mimics to enhance the effect of tumor photothermal treatment. Further in vitro and in vivo assays demonstrate that the hierarchical superstructure can effectively ablate tumor cells. This work opens new horizons in hierarchical superstructures with complex architectures, and has great potential in nanozymology, biomedical science, and catalysis.

Ti3+ Tuning the Ratio of Cu+ /Cu0 in the Ultrafine Cu Nanoparticles for Boosting the Hydrogenation Reaction

Hydrogenation of diesters to diols is a vital process for chemical industry. The inexpensive Cu⁺ /Cu⁰ -based catalysts are highly active for the hydrogenation of esters, however, how to efficiently tune the ratio of Cu⁺ /Cu⁰ and stabilize the Cu⁺ is a great challenge. In this work, it is demonstrated that doped Ti ions can tune the ratio of Cu⁺ /Cu⁰ and stabilize the Cu⁺ by the TiOCu bonds in Ti-doped SiO₂ supported Cu nanoparticle (Cu/Ti-SiO₂ ) catalysts for the high conversion of dimethyl adipate to 1,6-hexanediol. In the synthesis of the catalysts, the Ti⁴⁺ OCu²⁺ bonds promote the reduction of Cu²⁺ to Cu⁺ by forming Ti³⁺ O_V Cu⁺ (O_V : oxygen vacancy) bonds and the amount of Ti doping can tune the ratio of Cu⁺ /Cu⁰ . In the catalytic reaction, the O vacancy activates CO in the ester by forming new Ti^{3+ δ} O_R Cu^{1+ δ} bonds (O_R : reactant oxygen), and Cu⁰ activates hydrogen. After the products are desorbed, the Ti^{3+ δ} O_R Cu^{1+ δ} bonds return to the initial state of Ti³⁺ O_V Cu⁺ bonds. The reversible TiOCu bonds greatly improve the activity and stability of the Cu/Ti-SiO₂ catalysts. When the content of Ti is controlled at 0.4 wt%, the conversion and selectivity can reach 100% and 98.8%, respectively, and remain stable for 260 h without performance degradation.

Cardiac troponin I photoelectrochemical sensor: {Mo368} as electrode donor for Bi2S3 and Au co-sensitized FeOOH composite

A suitable electron donor, which guarantees the stability of the whole system, is considered as the driving force of the PEC sensor. Nowadays, searching appropriate electron donor is still one of the orientations to explorate in the field of sensor. Na₄₈[H₄₉₆Mo₃₆₈O₁₄₆₄S₄₈]·ca.1000H₂O (abbr. {Mo₃₆₈}), as a type of polyoxometalate, has perfect morphology, definite size and unique electronic property. Due to the prominent water solubility, {Mo₃₆₈} usually releases small cations and exists as large anions in the ultrapure water. The interesting property endows {Mo₃₆₈} with excellent reducibility, which provides great feasibility to become an outstanding electron donor. In addition, FeOOH prepared through a simple operation owns high adsorption capacity, which ensures the fastness of other materials. Subsequently, the narrow band-gap of Bi₂S₃ and the unique noble metal properties of Au nanoparticles are utilized to co-sensitize FeOOH to improve the light-harvesting capability and photoelectric conversion efficiency. Combined with the specificity recognition of antigen and antibody, a novel photoelectrochemical sensor is constructed with a wide detection range of 1.00 pg mL^-1 - 100 ng mL^-1 and low detection limit (0.76 pg mL^-1), which achieves the sensitive detection of cardiac troponin I in early diagnosis of cardiovascular disease.

Magnetically Hollow Pt Nanocages with Ultrathin Walls as a Highly Integrated Nanoreactor for Catalytic Transfer Hydrogenation Reaction

Fabricating efficient and stable nanocatalysts for chemoselective hydrogenation of nitroaromatics is highly desirable because the amines hold tremendous promise for the synthesis of nitrogen containing chemicals. Here, a highly reactive and stable porous carbon nitride encapsulated magnetically hollow platinum nanocage is developed with subnanometer thick walls (Fe3O4@snPt@PCN) for this transformation. This well-controlled nanoreactor is prepared via the following procedures: the preparation of core template, the deposition of platinum nanocage with subnanometer thick walls, oxidative etching, and calcination. This highly integrated catalyst demonstrates excellent performance for the catalytic transfer hydrogenation of various nitroaromatics and the reaction can reach >99% conversion and >99% selectivity. With the ultrathin wall structure, the atom utilization of platinum atoms is highly efficient. The X-ray photoelectron spectroscopy results indicate that partial electrons transfer from the iron oxides to Pt nanowalls, and this increases the electron density of snPt nanoparticles, thus promoting the catalytic activity for the transfer hydrogenation of nitroaromatics. For the reduction of 4-nitrophenol, the reaction rate constant K app is 0.23 min-1 and the turnover frequency (TOF) is up to 3062 h-1. Additional reaction results illustrate that this magnetic nanoreactor can be reused more than eight times and it is a promising catalytic nanoplatform in heterogeneous catalysis.