Fast and Scalable Hydrodynamic Synthesis of MnO2/Defect-Free Graphene Nanocomposites with High Rate Capability and Long Cycle Life

Highly Stretchable Sensor Based on Fluid Dynamics-Assisted Graphene Inks for Real-Time Monitoring of Sweat

Graphene inks have recently attracted attention for the development of printed wearable and flexible electronics and sensors not only because of their high conductivity and low cost but also because they are suitable for high-speed printing. Although reliable and scalable printing technologies are well established, further improvement in graphene inks in terms of electrical conductivity, stretchability/flexibility, and mass production is necessary for sensors for real-time monitoring. Herein, highly stretchable and conductive graphene inks were prepared by an efficient and scalable fluid dynamics-assisted exfoliation of graphite and a mixing process with elastomeric Ecoflex. After printing inks onto textile substrates, the serpentine-patterned conductors exhibited high conductivity and stable resistance even under a mechanically stretched state (a strain of 150%). Electrochemical sensors that detect sodium ions were fabricated on this conducting platform. These sensors indicated high potentiometric sensing ability under different mechanical deformations. To demonstrate the on-body performance of the developed sensors, real-time monitoring of sodium-ion concentration in the sweat of a human subject was carried out during an indoor stationary cycling exercise.

Highly Concentrated, Conductive, Defect-free Graphene Ink for Screen-Printed Sensor Application

Ultrathin and defect-free graphene ink is prepared through a high-throughput fluid dynamics process, resulting in a high exfoliation yield (53.5%) and a high concentration (47.5 mg mL^-1). A screen-printed graphene conductor exhibits a high electrical conductivity of 1.49 × 10⁴ S m^-1 and good mechanical flexibility. An electrochemical sodium ion sensor based on graphene ink exhibits an excellent potentiometric sensing performance in a mechanically bent state. Real-time monitoring of sodium ion concentration in sweat is demonstrated. Conductive inks based on graphene materials have received significant attention for the fabrication of a wide range of printed and flexible devices. However, the application of graphene fillers is limited by their restricted mass production and the low concentration of their suspensions. In this study, a highly concentrated and conductive ink based on defect-free graphene was developed by a scalable fluid dynamics process. A high shear exfoliation and mixing process enabled the production of graphene at a high concentration of 47.5 mg mL^-1 for graphene ink. The screen-printed graphene conductor exhibits a high electrical conductivity of 1.49 × 10⁴ S m^-1 and maintains high conductivity under mechanical bending, compressing, and fatigue tests. Based on the as-prepared graphene ink, a printed electrochemical sodium ion (Na⁺) sensor that shows high potentiometric sensing performance was fabricated. Further, by integrating a wireless electronic module, a prototype Na⁺-sensing watch is demonstrated for the real-time monitoring of the sodium ion concentration in human sweat during the indoor exercise of a volunteer. The scalable and efficient procedure for the preparation of graphene ink presented in this work is very promising for the low-cost, reproducible, and large-scale printing of flexible and wearable electronic devices.

A graphene–MnO2 composite supercapacitor material accomplished tactically using liquid–liquid and solid–liquid interface reaction techniques

An exceptional, simplistic, approach is established for preparing a GNS–MnO₂ thin film supercapacitor having a steady and superior performance.

High-Throughput Production of Heterogeneous RuO2/Graphene Catalyst in a Hydrodynamic Reactor for Selective Alcohol Oxidation

We report on the high-throughput production of heterogeneous catalysts of RuO2-deposited graphene using a hydrodynamic process for selective alcohol oxidation. The fluid mechanics of a hydrodynamic process based on a Taylor–Couette flow provide a high shear stress field and fast mixing process. The unique fluidic behavior efficiently exfoliates graphite into defect-free graphene sheets dispersed in water solution, in which ionic liquid is used as the stabilizing reagent to prevent the restacking of the graphene sheets. The deposition of RuO2 on a graphene surface is performed using a hydrodynamic process, resulting in the uniform coating of RuO2 nanoparticles. The as synthesized RuO2/IL–graphene catalyst has been applied efficiently for the oxidation of a wide variety of alcohol substrates, including biomass-derived 5-hydroxymethylfurfural (HMF) under environmentally benign conditions. The catalyst is mechanically stable and recyclable, confirming its heterogeneous nature.