Surface Functionalization and Patterning by Multifunctional Resorcinarenes

Design of a self-cleanable multilevel anticounterfeiting interface through covalent chemical modulation

Counterfeit products have posed a significant threat to consumers safety and the global economy. To address this issue, extensive studies have been exploring the use of coatings with unclonable, microscale features for authentication purposes. However, the ease of readout, and the stability of these features against water, deposited dust, and wear, which are required for practical use, remain challenging. Here we report a novel class of chemically functionalizable coatings with a combination of a physically unclonable porous topography and distinct physiochemical properties (e.g., fluorescence, water wettability, and water adhesion) obtained through orthogonal chemical modifications (i.e., 1,4-conjugate addition reaction and Schiff-base reaction at ambient conditions). Unprecedentedly, a self-cleanable and physically unclonable coating is introduced to develop a multilevel anticounterfeiting interface. We demonstrate that the authentication of the fluorescent porous topography can be verified using deep learning. More importantly, the spatially selective chemical modifications can be read with the naked eye via underwater exposure and UV light illumination. Overall, the results reported in this work provide a facile basis for designing functional surfaces capable of independent and multilevel decryption of authenticity.

Hybrid superhydrophobic/hydrophilic patterns deposited on glass by laser-induced forward transfer method for efficient water harvesting

In recent years, the combination of factors such as growing population and global climate change has resulted in freshwater shortages. Therefore, water harvesting from the atmospheric fog in order to produce freshwater supply inspired by nature has received much attention. The water harvesting capability of the creatures is significantly based on the combination of both wettability states on their surfaces. In this study, a facile physicochemical hybrid method was used for the fabrication of glass surfaces with contrast wettability. First, fractal and regular repeated geometric patterns were deposited on a glass substrate using brass sheet as donor material by laser induced forward transfer (LIFT) method. Subsequently, stearic acid (SA) treatment was used to convert the wettability of the superhydrophilic (SHL) deposited patterns on glass to superhydrophobic. In order to investigate the effect of the shape of designed patterns on glass surfaces in the water harvesting efficiency, the amount of collected water for a period of time from untreated hydrophilic (HL) glass, superhydrophobic (SHB) glass and hybrid superhydrophobic/hydrophilic (SHB-HL) surfaces were measured. The obtained results indicate that the hybrid of superhydrophobic and hydrophilic regions and selecting the optimal pattern can improve the water harvesting performance by up to 300%.

High-Efficient Vacuum Ultraviolet-Ozone Assist-Deposited Polydopamine for Poly(lactic-co-glycolic acid)-Coated Pure Zn toward Biodegradable Cardiovascular Stent Applications

Zinc is a prospective metal for biodegradable cardiovascular stent applications, but the excessively released Zn²⁺ during degradation remains a huge challenge in biocompatibility. Considerable efforts have been made to develop a high-efficient surface modification method, while maintaining adhesion strength, mechanical support, and vascular compatibility. Biomimetic polydopamine (PDA) can adhere to Zn tightly, subsequently achieving robust chemical bonds with poly(lactic-co-glycolic acid) (PLGA) coating. However, the deposition of PDA on Zn depends on the controlled conditions such as a sensitive pH and a long period of time. Herein, we introduce vacuum ultraviolet-ozone (VUV/O₃) assist-deposition technology to accelerate the polymerization of PDA on pure Zn, which shortens the process to 40 min at a moderate pH of 8.5 and improves the deposition rate by 1-2 orders of magnitude under sufficient active oxygen species (ROS). Additionally, PLGA/PDA coating enhances the corrosion resistance, and their effective protection maintains the mechanical properties after long-term corrosion. Moreover, the controlled Zn²⁺ release contributes to the superior in vitro biocompatibility, which inhibits the hemolysis rate and smooth muscle cell (SMC) proliferation. The enhanced endothelial cell (EC) proliferation is promising to promote the re-endothelialization, avoiding in-stent restenosis and neointimal hyperplasia. Such modified Zn might be a viable candidate for the treatment of cardiovascular diseases.

Fast preparation of Fe3O4@polydopamine/Au for highly efficient degradation of tetracycline

This work reported the fast synthesis of magnetic polydopamine Au-Fenton catalyst (Fe₃O₄@PDA/Au) under UV irradiation at 365 nm. The microstructure of prepared nanocomposites was characterized by various techniques. The effects of several key factors (pH values, H₂O₂ content and TC concentration) of tetracycline (TC) degradation were evaluated. The results revealed that the TC and total organic carbon (TOC) removal rate reached up to 98.16% and 93.14% within 300 min under optimal conditions (pH 3, H₂O₂ 80 μL, TC concentration 20 mg/L). Besides, HO radicals were generated during the Fenton-like degradation process and the plausible degradation mechanism was discussed. Moreover, Fe₃O₄@PDA/Au catalyst retained excellent catalytic capacity (TC removal rate 96.94% and TOC removal rate 87.69%) and exhibited fantastic stability after six cycles. Moreover, metal ions leaching was evaluated (0.023 mg/L). Altogether, the novel Fe₃O₄@PDA/Au Fenton-like catalyst is highly promising for wastewater management.

High-throughput screening of multifunctional nanocoatings based on combinations of polyphenols and catecholamines

Biomimetic surface coatings based on plant polyphenols and catecholamines have been used broadly in a variety of applications. However, the lack of a rational cost-effective platform for screening these coatings and their properties limits the true potential of these functional materials to be unleashed. Here, we investigated the oxidation behavior and coating formation ability of a library consisting of 45 phenolic compounds and catecholamines. UV-vis spectroscopy demonstrated significant acceleration of oxidation and polymerization under UV irradiation. We discovered that several binary mixtures resulted in non-additive behavior (synergistic or antagonistic effect) yielding much thicker or thinner coatings than individual compounds measured by ellipsometry. To investigate the properties of coatings derived from new combinations, we used a miniaturized high-throughput strategy to screen 2,532 spots coated with single, binary, and ternary combinations of coating precursors in one run. We evaluated the use of machine learning models to learn the relation between the chemical structure of the precursors and the thickness of the nanocoatings. Formation and stability of nanocoatings were investigated in a high-throughput manner via discontinuous dewetting. 30 stable combinations (hits) were used to tune the surface wettability and to form water droplet microarray and spot size gradients of water droplets on the coated surface. No toxicity was observed against eukaryotic HeLa cells and Pseudomonas aeruginosa (strain PA30) bacteria after 24 h incubation at 37 °C. The strategy introduced here for high-throughput screening of nanocoatings derived from combinations of coating precursors enables the discovery of new functional materials for various applications in science and technology in a cost-effective miniaturized manner.

Adhesion of Grafted-to Polyelectrolyte Brushes Functionalized with Calix[4]resorcinarene and Deposited as a Monolayer

Polyelectrolyte adhesives, either poly[2-(dimethylamino)ethyl methacrylate] or poly(methacrylic acid), functionalized with a surface-active calix[4]resorcinarene were grafted onto silicon wafers. Adhesion studies on these grafted-to brushes using polyelectrolyte hydrogels of opposite charge showed that it is the calix[4]resorcinarene, rather than adsorption of polyelectrolyte monomers, that adheres the brush to the silicon substrate. The adhesion measured was similar to that measured using polymers grafted from the surface, and was stronger than a control layer of poly(vinyl acetate) under the same test conditions. The limiting factor was determined to be adhesive failure at the hydrogel-brush interface, rather than the brush-silicon interface. Therefore, the adhesion has not been adversely affected by changing from a grafted-from to a grafted-to brush, demonstrating the possibility of a one-pot approach to creating switchable adhesives.

Insights into Mechanism of Hypochlorite-Induced Functionalization of Polymers toward Separating BFR-Containing Components from Microplastics

Surface functionalization of polymers is significant for an emerging flotation technique for separation of microplastics toward the recycling of plastic wastes. In this study, the hypochlorite-induced functionalization of polymers, including ABS, PMMA, PS, and PVC polymers, was intensively investigated. Afterward, its emerging application in flotation separation of microplastic mixtures was assessed based on a Box-Behnken design of the response surface methodology. The functionalization favorably induced decreases in the contact angle and zeta potential of polymers, suggesting hydrophilic and negatively charged surfaces. Particularly, the functionalization of ABS polymers was the most effective, leading to the obviously decreased contact angle (from 92.5° to 67.8°) and zeta potential (from -26.4 mV to -41.7 mV) at neutral condition. The major mechanism for these variations was the oxidation of the sp³-C and butenyl group by hydroxyl radical and the hydrolysis of cyano group, which introduced the hydroxyl, carboxyl, and amide groups and rough topographies on the surface of ABS polymers. Oxygen functionalities introduced on the surfaces of other polymers were far less than those of ABS polymers. This selectivity inspired us to apply the functionalization in flotation separation of ABS microplastics from microplastic mixtures. After functionalization, ABS microplastics showed a significantly decreased floatability in flotation tests since the hydrophilic surface was repulsive to the adhesion of air bubbles. An empirical model was built to optimize the separation efficiency using the overall desirability function. Under optimum conditions, ABS microplastics were efficiently separated, and their removal rate, recovery, and purity were 99.8%, 99.8%, and >99.9%, respectively. These findings provide significant insights into the mechanism of the functionalization of polymers and show a promising prospect for pollution control of plastic wastes.