Rapid Self-Assembly of Au Nanoparticles on Rigid Mesoporous Yeast-Based Microspheres for Sensitive Immunoassay

Engineered Escherichia coli as a Controlled-Release Biocarrier for Electrochemical Immunoassay

Micro/nanocarriers hold great potential in bioanalysis for molecular recognition and signal amplification but are frequently hampered by harsh synthesis conditions and time-consuming labeling processes. Herein, we demonstrate that Escherichia coli (Ec) can be engineered as an efficient biocarrier for electrochemical immunoassay, which can load ultrahigh amounts of redox indicators and simultaneously be decorated with detection antibodies via a facile polydopamine (PDA)-mediated coating approach. Compared with conventional carrier materials, the entire preparation of the Ec biocarrier is simple, highly sustainable, and reproducible. Moreover, immune recognition and electrochemical transduction are performed independently, which eliminates the accumulation of biological interference on the electrode and simplifies electrode fabrication. Using human epidermal growth factor receptor 2 (HER2) as the model target, the proposed immunosensor exhibits excellent analytical performance with a low detection limit of 35 pg/mL. The successful design and deployment of Ec biocarrier may provide new guidance for developing biohybrids in biosensing applications.

Microorganisms@aMIL-125 (Ti): An Amorphous Metal-Organic Framework Induced by Microorganisms and Their Applications

Amorphous metal-organic framework (aMOF)-based materials have attracted considerable attention as an emerging class of nanomaterials. Herein, novel microorganisms@aMIL-125 (Ti) composites including yeast@aMIL-125 (Ti), PCC 6803@aMIL-125 (Ti), and Escherichia coli@aMIL-125 (Ti) composites were respectively synthesized by self-assembling aMOFs on the microorganisms' surface. The functional groups on the microorganisms' surface induced structural defects and participated in the formation of aMIL-125 (Ti) composites. Finally, the application of microorganisms@aMIL-125 (Ti) composites for the removal of glyphosate from aqueous solution was selected as a model reaction to illustrate their potential for environmental protection. The present method is not only economical but also has other advantages including ease of operation, environmentally friendly assay, and high adsorption. The maximum adsorption capacity of aMIL-125 (Ti) was 1096.25 mg g^-1, which was 1.74 times that of crystalline MIL-125 (Ti). Therefore, the microorganisms@aMOFs composites will have broad application prospects in energy storage, drug delivery, catalysis, adsorbing toxic substances, sensing, encapsulating and delivering enzymes, and in other fields.

Multifunctional bacteria-derived tags for advancing immunoassay analytical performance with dual-channel switching and antibodies bioactivity sustaining

Constructing multifunctional immunochromatographic assays (ICA) carriers with multiple signals and retaining bioactivity of monoclonal antibodies (mAbs) are conducive to the sensitive and accurate point-of-care testing (POCT). To fulfill this pressing need, a microorganism-based microsphere mediated dual-modal ICA (DICA) was developed for sensitive and reliable detection of zearalenone (ZEN). As the key to the biosensor, a superb biotag with an intact coccus morphology was designed based on Staphylococcus aureus biosynthesized quantum dots incorporating Ru(bpy)₃²⁺ (SAQDsRu), in which SA offered a specific recognition capacity for Fc region of mAbs, QDs endowed a naked-eye discernible colorimetric signal on the SA, and robust fluorescence signal that remedied for the insufficient brightness of QDs was derived from Ru(bpy)₃²⁺. The characterization of SAQDsRu-labeled mAb (SAQDsRu-mAb) probe demonstrated strong luminescence, excellent stability and high affinity with ZEN (affinity constant was approximately 1.723 × 10⁹ M^-1), which can significantly improve the detection sensitivity. Impressively, a portable sensing system was developed by the integration of SAQDsRu-DICA with a smartphone-based readout. After optimization, this DICA indicated a limit of detection reaching down to 0.008 ng/mL (colorimetric mode) and 0.0058 ng/mL (fluorescent mode), which were much lower than that of conventional gold nanoparticles-based ICA (0.1029 ng/mL), possessing favorable specificity and repeatability (relative standard deviation (RSD) < 10%). Moreover, the feasibility of the immunoassay was further assessed by measuring ZEN in real samples with satisfactory recoveries, and the results are good consistent with liquid chromatography tandem mass spectrometry (LC-MS/MS).

Light-Regulated Natural Fluorescence of the PCC 6803@ZIF-8 Composite as an Encoded Microsphere for the Detection of Multiple Biomarkers

The use of color-encoded microspheres for a bead-based assay has attracted increasing attention for high-throughput multiplexed bioassays. A fluorescent PCC 6803@ZIF-8 composite was prepared as a bead-based assay platform by a self-assembled zeolitic imidazolate framework (ZIF-8) on the surface of inactivated PCC 6803 cells. The composite fluorescence owing to the presence of pigment proteins in PCC 6803 could be gradually bleached with the prolongation of the ultraviolet light irradiation time. The composites with different fluorescence intensities were therefore obtained as encoded microspheres for the multiplexed assay. ZIF-8 provides a stable, rigid shell and a large specific surface area for composites, which prevent the composites from breakage during use and storage, simplify the protein immobilization procedure, reduce non-specific adsorption, and enhance the detection sensitivity. The encoded composites were successfully used to detect multiple DNA insertion sequences of Mycobacterium tuberculosis. The presented strategy offers an innovative color-encoding method for high-throughput multiplexed bioassays without the need of using chemically synthesized fluorescent materials.

E. coli@UiO-67 composites as a recyclable adsorbent for bisphenol A removal

E. coli@UiO-67 composites were obtained using an effective and simple self-assembly method. The composites showed unique properties as a remarkable and recyclable adsorbent for the efficient removal of bisphenol A (BPA) from water with a high adsorption capacity (402.930 mg g^-1). The increase in pore size is a key factor why E. coli@UiO-67 composites maintained high capacity. The reason might be due to that the composites with large pore sizes and defects could effectively improve mass transport and active molecular metal sites. The adsorption of BPA is a chemisorption process due to the Zr-OH groups in UiO-67 exhibit affinity toward BPA molecules, π-π interaction, and electrostatic attraction. The adsorption efficiency remained at 82.5% after 15 cycles without any remarkable changes in the PXRD patterns of E. coli@UiO-67. Moreover, the use of microorganism-loading MOFs could reduce the cost to at least 50% and minimize secondary pollution through nanoscale MOFs usage reduction. The developed composites have advantages, including low-cost, high adsorption capacity, easy to be separated and regenerated from aqueous solution, a large number of cycles, short adsorption equilibrium time, and stability, showing excellent application prospects. The presented strategy would be a potentially promising way to produce novel MOFs-based adsorbents with high-performance to control environmental pollution from wastewater.

Gold nanoparticles enhance fluorescence signals by flow cytometry at low antibody concentrations

Flow cytometry is a universally applied technique in many biological and clinical assays to evaluate cells, bacteria, parasites, and particles at a micrometre scale. More advanced flow cytometers can detect small molecules down to the nanometre scale that may identify intracellular nanostructures. Advancements in the field of nanobiotechnology have led to techniques that allow the study of cellular behaviour after exposure to nanomaterials, particularly, metal nanoparticles. The optical properties of gold nanoparticles regarding surface plasmon resonance (SPR) are established to increase the fluorescence quantum yields of several dyes working as optical antennas, enabling the enhancement of light emission in fluorescent emitters. In this work we constructed a nanoprobe using gold nanoparticles coated with primary antibody Cetuximab. Then, we investigated whether this nanoprobe labelled with secondary fluorescent antibody Alexa Fluor 488, at low concentrations, could promote fluorescent signal enhancement, associated with SPR, and detected by the flow cytometry technique. Our results showed an enhanced fluorescent signal likely due to the proximity between the extinction coefficient of gold nanoparticles and the emission peak of Alexa Fluor 488, at exceptionally low concentrations, occurring within a high level of specificity. Moreover, the nanoprobe did not alter the cellular viability suggesting gold nanoparticles as a feasible approach for cell labelling using low concentrations of secondary antibodies for routine flow cytometry applications.

Microorganism@UiO-66-NH2 Composites for the Detection of Multiple Colorectal Cancer-Related microRNAs with Flow Cytometry

High-throughput analyses of multitarget markers can facilitate rapid and accurate clinical diagnosis. Suspension array assays, a flow cytometry-based analysis technology, are among some of the most promising multicomponent analysis methods for clinical diagnostics and research purposes. These assays are appropriate for examining low-volume, complex samples having trace amounts of analytes due to superior elimination of background. Physical shape is an important and promising code system, which uses a set of visually distinct patterns to identify different assay particles. Here, we presented a morphology recognizable suspension arrays based on the microorganisms with different morphologies. In this study, UiO-66-NH₂ (UiO stands for University of Oslo) metal-organic frameworks (MOFs), was wrapped on the microorganism surface to form an innovative class of microorganism@UiO-66-NH₂ composites for suspension array assays. The use of microorganisms endowed composites barcoding ability with their different morphology and size. Meanwhile, the UiO-66-NH₂ provided a stable rigid shell, large specific surface area, and metal(IV) ions with multiple binding sites, which could simplify the protein immobilization procedure and enhance detection sensitivity. With this method, simultaneous detection of three colorectal cancer-related microRNA (miRNA), including miRNA-21, miRNA-17, and miRNA-182, could be easily achieved with femtomolar sensitivity by using a commercial flow cytometer. The synergy between microorganisms and MOFs make the composites a prospective barcoding candidate with excellent characteristics for multicomponent analysis, offering great potential for the development of high throughput and accurate diagnostics.

Flow-cytometry detection of fluorescent magnetic nanoparticle clusters increases sensitivity of dengue immunoassay

We report a flow-cytometry based method capable of detecting a range of analytes by monitoring the analyte-induced clustering of magnetic and fluorescent nanoparticles with flow cytometry. Using the dengue viral antigen (NS1) as an example, antibodies were conjugated to magnetic and fluorescent nanoparticles in a sandwich immunoassay format. These nanoparticles formed clusters when NS1 was present in a sample and the cluster formation was directly proportional to the concentration of antigen. Simultaneous flow cytometry measurement of cluster size, as detected by the forward scatter channel, combined with fluorescence intensity led to a reduction in the assay background signal, resulting in improved analytical sensitivity. We were able to detect 2.5 ng mL^-1 of NS1 in serum samples by quantifying the clusters, a two-log fold improvement in the assay limit of detection over total fluorescence quantification alone.