Trimetallic PtPdNi-Truncated Octahedral Nanocages with a Well-Defined Mesoporous Surface for Enhanced Oxygen Reduction Electrocatalysis

Synthesis of low-cost multi-element Pt-based alloy nanoparticles as catalysts for the oxygen reduction reaction

Due to their high catalytic activity, stability, and economic benefits, Pt-based multi-element alloyed nanoparticles (NPs) are considered promising electrodes for oxygen reduction reactions. However, a synthesis method capable of controlling the reduction reaction of elements with different redox potentials to synthesize multimetallic alloy NPs is yet to be developed. In this study, monodisperse NiPtPd alloy NPs with varying compositions were synthesized using 1-heptanol as a reducing solvent. The selection of low-reducing noble metal precursors and complexing agents is done strategically to adjust the reduction time of metal ions. The spectroscopic results confirmed that olelylamine (OAm) preferentially coordinates with Pt ions, while trioctylphosphine (TOP) preferentially coordinates with Pd ions. Consequently, control of the elemental distribution within the particle is successfully achieved by adjusting the OAm/Pt and TOP/Pd molar ratios. Subsequently, Ni78Pt11Pd11 alloy NPs were designed, and their catalytic properties as electrodes in the oxygen reduction reaction (ORR) were examined. Despite a low noble metal content of 22%, the catalytic performance and stability were superior to and comparable to those of commercial Pt NPs, respectively.

Noble-Metal-Based Hollow Mesoporous Nanoparticles: Synthesis Strategies and Applications

As second-generation mesoporous materials, mesoporous noble metals (NMs) are of significant interest for their wide applications in catalysis, sensing, bioimaging, and biotherapy owing to their structural and metallic features. The introduction of interior hollow cavity into NM-based mesoporous nanoparticles (MNs), which subtly integrate hierarchical hollow and mesoporous structure into one nanoparticle, produces a new type of hollow MNs (HMNs). Benefiting from their higher active surface, better electron/mass transfer, optimum electronic structure, and nanoconfinement space, NM-based HMNs exhibit their high efficiency in enhancing catalytic activity and stability and tuning catalytic selectivity. In this review, recent progress in the design, synthesis, and catalytic applications of NM-based HMNs is summarized, including the findings of the groups. Five main strategies for synthesizing NM-based HMNs, namely silica-assisted surfactant-templated nucleation, surfactant-templated sequential nucleation, soft "dual"-template, Kirkendall effect in synergistic template, and galvanic-replacement-assisted surfactant template, are described in detail. In addition, the applications in ethanol oxidation electrocatalysis and hydrogenation reactions are discussed to highlight the high activity, enhanced stability, and optimal selectivity of NM-based HMNs in (electro)catalysis. Finally, the further outlook that may lead the directions of synthesis and applications of NM-based HMNs is prospected.

A sandwich-type electrochemical immunosensor for CYFRA 21-1 based on probe-confined in PtPd/polydopamine/hollow carbon spheres coupled with dendritic Au@Rh nanocrystals

A signal-on sandwich-like electrochemical immunosensor was built for determination of cytokeratin 19 fragments 21-1 (CYFRA 21-1) in non-small cell lung cancer (NSCLC) by confining electroactive dye (e.g., methylene blue, MB) as a probe for amplifying signals. Specifically, core-shell gold@rhodium dendritic nanocrystals (Au@Rh DNCs) behaved as a substrate for primary antibody and accelerate interfacial electron transfer. Besides, hollow carbon spheres (HCSs) were subsequently modified with polydopamine (PDA) and PtPd nanoparticles for sequential integration of the secondary antibody and confinement of MB as a label, termed as MB/PtPd/PDA/HCSs for clarity. The built sensors showed a broad linear range (100 fg mL^-1 ~ 100 ng mL^-1) for detection of CYFRA 21-1 with an ultra-low detection limit (31.72 fg mL^-1, S/N = 3), coupled with satisfactory performance in human serum samples. This work can be explored for assays of other proteins and provides some constructive insights for early and accurate diagnosis of NSCLC.

Recent advances in fuel cell reaction electrocatalysis based on porous noble metal nanocatalysts

As the center of fuel cells, electrocatalysts play a crucial role in determining the conversion efficiency from chemical energy to electrical energy. Therefore, the development of advanced electrocatalysts with both high activity and stability is significant but challenging. Active site, mass transport, and charge transfer are three central factors influencing the catalytic performance of electrocatalysts. Endowed with rich available surface active sites, facilitated electron transfer and mass diffusion channels, and highly active components, porous noble metal nanomaterials are widely considered as promising electrocatalysts toward fuel cell-related reactions. The past decade has witnessed great achievements in the design and fabrication of advanced porous noble metal nanocatalysts in the field of electrocatalytic fuel oxidation reaction (FOR) and oxygen reduction reaction (ORR). Herein, the recent research advances regarding porous noble metal nanocatalysts for fuel cell-related reactions are reviewed. In the discussions, the inherent structural features of porous noble metal nanostructures for electrocatalytic reactions, advanced synthetic strategies for the fabrication of porous noble metal nanostructures, and the structure-performance relationships are also provided.

One-Pot Aqueous Synthesis of Porous Hollow PdCu Alloy Nanoparticles for Enhanced Ethanol Electrooxidation

Bimetallic PdCu porous hollow nanoparticles (PHNs) with hierarchical nanostructures and well-alloyed compositions were precisely synthesized through a one-pot aqueous synthetic route. Bimetallic PdCu PHNs exhibited multiple enhancement synergies and thus performed well in ethanol oxidation electrocatalysis with remarkable activity and stability. This work expedites rational design and synthesis of the high-hierarchy alloy electrocatalysts for fuel cell electrocatalysis.

Facile Synthesis of Pd and PdPtNi Trimetallic Nanosheets as Enhanced Oxygen Reduction Electrocatalysts

While bimetallic 2D metallic nanomaterials are widely synthesized and used as electrocatalysts with enhanced performance, trimetallic 2D structures are less commonly reported. In this work, a facile wet chemical method for synthesizing Pd nanosheets and PdPtNi trimetallic alloy nanosheets is developed. Without the introduction of gaseous CO and pressurized equipment, Pd nanosheets with a thickness of ≈2.85 nm and sizes in the range of 1-2 µm can be obtained. The facile synthesis conditions allow for a comprehensive study of the nanosheet growth mechanism. It is found that 2D growth is closely related to the product of solvent decomposition and the additive ligand diethylenetriamine. Further, by depositing Pt and Ni onto the Pd nanosheets, trimetallic nanosheets with tunable compositions can be obtained and applied as oxygen reduction reaction electrocatalysts. Typically, the Pd₉ Pt₁ Ni₁ nanosheets have the highest half-wave potential of 0.928 V (vs reversible hydrogen electrode), which is 34 mV higher than that of commercial Pt/C and 28 mV higher than that of Pd/C, and also have high durability.

One-Pot Synthesis of Ternary Alloy Hollow Nanostructures with Controlled Morphologies for Electrocatalysis

The rational design and synthesis of multimetallic hollow nanostructures (HNSs) have been attracting great attention due to their structural and compositional advantages for application in electrocatalysis. Herein, the one-pot synthesis of Pd-Pt-Ag ternary alloy HNSs with controllable morphologies through a self-templating approach without any pre-synthesized templates is reported. Simultaneous reduction of multiple metal precursors by ascorbic acid in the presence of cetyltrimethylammonium chloride (CTAC) yielded initially metastable Pd-Ag nanocrystals, which can act as a self-template, and subsequent galvanic replacement and reduction led to the formation of final Pd-Pt-Ag HNSs. The size and hollowness (the ratio of inner cavity diameter to outer diameter) of the HNSs could be tuned through control over the concentration of CTAC. This can be attributed to the manipulated reduction kinetics of multiple metal precursors with the change in the CTAC concentration. The prepared Pd-Pt-Ag HNSs exhibited improved catalytic performance for ethanol electro-oxidation due to their large active surface areas and ternary alloy composition.

Precisely tuning the electronic structure of a structurally ordered PtCoFe alloy via a dual-component promoter strategy for oxygen reduction

Optimizing the electronic structure of Pt-based alloys has emerged as an effective strategy to further improve their catalytic oxygen reduction reaction (ORR) performance, yet this remains challenging. Here, we have successfully tuned the electronic structure of ordered PtCoFe nanoparticles by incorporating the third component (Fe) into a bimetallic ordered PtCo alloy and manipulating its content. With the merits of the optimum electronic structure and the favorable composition, as well as the robust ordered structure, the as-prepared ordered PtCoFe-1-0.6 alloy (1 and 0.6 represent the feeding molar ratio of Co to Pt and Fe to Pt, respectively) exhibits enhanced catalytic performance for ORR. The L10-PtCoFe-1-0.6 alloy delivers higher specific activity (2.23 mA cm-2) than bimetallic L10-PtCo-1 (1.34 mA cm-2) and the commercial Pt/C (0.23 mA cm-2) catalyst. Indeed, this dual-catalytic-component promoter strategy gives a significant insight into developing high-performance homogeneous catalysts.

Synthesis of Structurally Stable and Highly Active PtCo3 Ordered Nanoparticles through an Easily Operated Strategy for Enhanced Oxygen Reduction Reaction

Constructing robust and cost-effective Pt-based electrocatalysts with an easily operated strategy remains a crucial obstacle to fuel cell applications. Conventional Pt-based catalysts suffer from high Pt content and an arduous synthetic process. Herein, through the spray dehydration method and annealing treatment, facile producible synthesis of a small-sized (5.2 nm) low-Pt (10.5 wt %) ordered PtCo₃/C catalyst (O-PtCo₃/C) for oxygen reduction reaction is reported. The fast spray evaporation rate contributes to small size and uniform nucleation of nanoparticles (NPs) on carbon support. O-PtCo₃/C-600 exhibits efficient electrocatalytic performance with mass activity (MA) 6.0-fold and specific activity 3.9-fold higher than commercial Pt/C. The ordered chemical structure generates superior stability with merely 3.5% decay in MA after 10,000 potential cycles. Density functional theory calculations reveal that the enhanced catalytic performance originates from rational modification of d-band through strain and ordering effect and accompanying weaker adsorption of intermediate OH. This work highlights the potentials of low-Pt PtM₃-type ordered NPs for prospective fuel cell cathodic catalysis. The proposed facile and practical synthetic strategy also shows promising prospects for preparing effective Pt-based electrocatalysts.

Ultrasonic-assisted synthesis of two dimensional coral-like Pd nanosheets supported on reduced graphene oxide for enhanced electrocatalytic performance

Two dimensional (2D) Pd nanosheets supported on reduced graphene oxide (Pd/rGO) were prepared through a sonochemical routine induced by cetyltrimethylammonium bromide (CTAB). Coral-like porous Pd nanosheets (Pd/rGO-u) were obtained under the sonication condition (25 kHz, 600 W, ultrasonic transducer), while square Pd nanosheets (Pd/rGO-c) were produced via traditional chemical reduction. The size of Pd nanosheets of Pd/rGO-u and Pd/rGO-c are 69.7 nm and 59.7 nm, and the thickness are 4.6 nm and 4.4 nm, respectively. The carrier GO was proved to be partially reduced to rGO with good electrical conductivity and oxygen-containing groups facilitated a good dispersion of Pd nanosheets. The interaction between GO and CTAB made the alkyl chain assembles to a 2D lamella micelles which limit the growth of Pd atoms resulting in the formation of 2D nanosheets. A high ultrasonic power promotes the reduction and the formation of porous structure. Additionally, Pd/rGO-u exhibited a favorable electrocatalytic performance toward oxygen reduction reaction (ORR) in alkaline condition, which provided a potential synthetic strategy assisted by sonication for high-performance 2D materials.

Atomic-Level Manipulations in Oxides and Alloys for Electrocatalysis of Oxygen Evolution and Reduction

As chemical reactions and charge-transfer simultaneously occur on the catalyst surface during electrocatalysis, numerous studies have been carried out to attain an in-depth understanding on the correlation among the surface structure and composition, the electrical transport, and the overall catalytic activity. Compared with other catalysis reactions, a relatively larger activation barrier for oxygen evolution/reduction reactions (OER/ORR), where multiple electron transfers are involved, is noted. Many works over the past decade thus have been focused on the atomic-scale control of the surface structure and the precise identification of surface composition change in catalyst materials to achieve better conversion efficiency. In particular, recent advances in various analytical tools have enabled noteworthy findings of unexpected catalytic features at atomic resolution, providing significant insights toward reducing the activation barriers and subsequently improving the catalytic performance. In addition to summarizing important surface issues, including lattice defects, related to the OER and ORR in this Review, we present the current status and discuss future perspectives of oxide- and alloy-based catalysts in terms of atomic-scale observation and manipulation.

Binary nonmetal S and P-co-doping into mesoporous PtPd nanocages boosts oxygen reduction electrocatalysis

The development of doped noble metal catalysts with nonmetal elements to improve the catalytic performance toward the oxygen reduction reaction (ORR) is significant for proton exchange membrane fuel cell technology. Here, we report a one-pot for dual-nonmetal-doping strategy for the synthesis of S and P-co-doped mesoporous PtPd nanocages (PtPdSP mNCs) by using pre-synthesized mesoporous PtPd nanocages (PtPd mNCs) as the precursor and triphenylphosphine sulphide as both S and P sources. Benefitting from the combined advantages of metal-nonmetal incorporation, hollow cavity and surface porosity, the resultant quaternary PtPdSP mNCs exhibit outstanding ORR activity and long-term stability. This research work provides a good strategy for the doping of two or more selected nonmetallic elements into metallic nanocrystals with a controllable structure and composition.

CO-Reductive and O2-Oxidative Annealing Assisted Surface Restructure and Corresponding Formic Acid Oxidation Performance of PdPt and PdRuPt Nanocatalysts

Formic acid oxidation reaction (FAOR) at anode counterpart incurs at substantial high overpotential, limiting the power output efficiency of direct formic acid fuel cells (DFAFCs). Despite intense research, the lack of high-performance nanocatalysts (NCs) for FAOR remains a challenge in realizing DFAFC technologies. To surmount the overpotential losses, it is desirable to have NCs to trigger the FAOR as close to the reversible conditions (i.e. with over-potential loss as close to zero as possible). Herein, Pd-based binary and ternary NCs consisting of PdPt and PdRuPt have been synthesized via the polyol reduction method on the carbon support. As prepared PdPt and PdRuPt NCs were further subjected to heat treatment (annealed) in CO (namely PdPt-CO and PdRuPt-CO) and O2 (namely PdPt-O2 and PdRuPt-O2) atmosphere at 473 K temperature. By cross-referencing results of electron microscopy and X-ray spectroscopy together with electrochemical analysis, the effects of heat treatment under CO-reductive and O2-oxidative conditions towards FAOR were schematically elucidated. Of special relevance, the mass activity (MA) of PdPt-CO, PdPt-O2, PdRuPt-CO, and PdRuPt-O2 NCs is 1.7/2.0, 1.3/2.2, 1.1/5.5, and 0.9/4.7 Amg-1 in the anodic/cathodic scan, respectively, which is 2~4-folds improved comparative to of as-prepared PdPt (1.0/1.9 Amg-1 in anodic/cathodic scan, respectively) and PdRuPt (0.9/1.4 Amg-1 in anodic/cathodic scan, respectively) NCs. Meanwhile, after chronoamperometric (CA) stability test up to 2000 s, PdPt-CO (72 mAmg-1) and PdRuPt-CO (213 mAmg-1) NCs exhibit higher MA compared to as-prepared PdPt (54 mAmg-1) and PdRuPt (62 mAmg-1) NCs, which is attributed to the increase of surface Pt composition, especially for PdRuPt-CO NC. Besides, the stability of PdPt-O2 (15 mAmg-1) and PdRuPt-O2 (22 mAmg-1) NCs is deteriorated as compared to that of as-prepared NCs due to severe oxidation in O2 atmosphere. Of utmost importance, we developed a ternary PdRuPt catalyst with ultra-low Pt content (~2 wt.%) and significantly improved FAOR performance than pure Pt catalysts. Moreover, we demonstrated that the FAOR performance can be further enhanced by more than 30% via a unique CO annealing treatment.

Engineering 3D hierarchical thorn-like PtPdNiCu alloyed nanotripods with enhanced performances for methanol and ethanol electrooxidation

Developing efficient and stable electrocatalysts with three-dimensional (3D) hierarchical nanostructures is extremely important in practical applications of direct alcohol fuel cells. Herein, 3D hierarchical thorn-like multi-metallic PtPdNiCu alloyed nanotripods (PtPdNiCu TNTPs) were efficiently fabricated by a one-pot aqueous method, in which Pluronic F127 performed as the structure-director and dispersing agent. The as-prepared PtPdNiCu TNTPs exhibited distinct electrocatalytic activity for methanol oxidation reaction (MOR) with a mass activity (MA) of 1.465 A mg^-1_Pd, which is superior to commercial Pt/C (0.925 A mg^-1_Pd) in 1.0 M KOH solution, along with the greater MA (1.019 A mg^-1_Pd) for ethanol oxidation reaction (EOR) than Pt/C (0.712 A mg^-1_Pd). This work would provide an impetus for rationally constructing multimetal nanomaterials to commercial implementation of advanced alcohol fuel cells.

Promoting formic acid oxidation performance of Pd nanoparticles via Pt and Ru atom mediated surface engineering

The alteration of surface functional properties via incorporation of foreign atoms is supposed to be a key strategy for the enhanced catalytic performance of noble-metal based nanocatalysts (NCs). In the present study, carbon-supported palladium (Pd)-based NCs including Pd, PdPt and PdRuPt have been prepared via a polyol reduction method under the same reduction conditions as for formic acid oxidation reaction (FAOR) applications. By cross-referencing the results of the microscopic, spectroscopic and electrochemical analysis we demonstrated that adding a small amount of platinum (Pt) into Pd NCs (i.e. PdPt NCs) significantly promotes the FAOR performance as compared to that of Pd NCs via weakening the COads bond strength at a lower voltage (0.875 V vs. NHE) than Pd (0.891 V vs. NHE). Of special relevance, the PdPt NC shows a mass activity (MA) of 1.0 A mg-1 and 1.9 A mg-1, respectively, in the anodic and cathodic scan. These values are ∼1.7-fold (0.6 A mg-1) and ∼4.8-fold (0.4 A mg-1) higher than those of Pd NC. Moreover, PdPt NC retains a higher MA (54 mA mg-1) than that of Pd NC (9 mA mg-1) after chronoamperometric (CA) stability tests over 2000 s. Meanwhile, further addition of ruthenium (Ru) (i.e. PdRuPt NCs) outstandingly enhances the CO tolerance during the CA test via removal of adsorbed COads and thus shows the highest MA (62 mA mg-1) after CA testing, which is higher than that of PdPt (54 mA mg-1) and Pd (9 mA mg-1) NCs. The intriguing results obtained in this study have great significance to provide further strategic opportunities for tuning the surface electronic properties of Pd-based NCs to design Pd-based NCs with improved electrochemical performance.

Integration mesoporous surface and hollow cavity into PtPdRh nano-octahedra for enhanced oxygen reduction electrocatalysis

Design and synthesis of Pt-based nanocrystals with controlled structural diversity and complexity can potentially bring about multifunctional properties. In this work, we present a facile two-step strategy for the construction of the PtPdRh mesoporous octahedral nanocages (PtPdRh MONCs). This unique nanoarchitectonics rationally integrates multiple advantages (i.e. the octahedral shape, hollow cavity and mesoporous surface) into one catalyst, which facilitates the efficient utilization of noble metal atoms at both of the interior and exterior surfaces. As expected, the resultant PtPdRh MONCs could effectively catalyze the oxygen reduction reaction (ORR) under acidic conditions. The demonstrated ORR activity and catalytic durability are superior to the commercial Pt/C catalyst. The present study would provide a general guidance for architectural and compositional engineering of noble metal nanocrystals with desired functionalities and properties.

Multinary PtPdNiP truncated octahedral mesoporous nanocages for enhanced methanol oxidation electrocatalysis

Multinary PtPdNiP TOMNs have been synthesized for the electrocatalytic methanol oxidation reaction with a superior electrocatalytic performance.

Noble Metal Based Alloy Nanoframes: Syntheses and Applications in Fuel Cells

Noble metal nanostructures are being used broadly as catalysts for energy conversion in fuel cells. To overcome the future energy crises, fuel cells are anticipated as clean energy sources because they can be operated at low temperature, their energy conversion is high and their carbon release is almost zero. However, an active and stable electrocatalyst is essential for the electrochemical reactions in fuel cells. Therefore, properties of the nanostructures greatly depend on the shape of the nanostructures. Individual as well as interaction properties are greatly affected by changes in the surface area of the nanostructures. By shape controlled synthesis, properties of the nanostructures could be further enhanced by increasing the surface area or active sites for electrocatalysts. Therefore, an efficient approach is needed for the fabrication of nanostructures to increase their efficiency, activity, or durability in fuel cells by reducing the usage of noble metals. Different types of hollow nanostructures until now have been prepared including nanoboxes, nanocages, nanoshells, nanoframes (NFs), etc. NFs are the hollow unique three-dimensional structure which have no walls-they only contain corners or edges so they have large surface area. In electrocatalytic reactions, the molecules involved in the reaction can easily reach the inner surface of the nanoframes, thus noble metals' utilization efficiency increases. NFs usually have high surface area, greater morphological and compositional stabilities, allowing them to withstand harsh environmental conditions. By considering the current challenges in fabrication of noble metal based alloy NFs as electrocatalysts, this review paper will highlight recent progress, design, and fabrication of noble metal alloy NFs through different strategies-mainly photocatalytic template, electrodeposition, Kirkendall effect, galvanic replacement, chemical/oxidative etching, combination of both and other methods. Then, electrochemical applications of NFs in fuel cells toward formic acid, methanol, ethanol, oxygen reduction reaction as well as bifunctional catalyst will also be highlighted. Finally, we will summarize different challenges in the fabrication of highly proficient nanocatalysts for the fuel cells with low cost, high efficiency and high durability, which are the major issues for the highly commercial use of fuel cells in the future.

Direct fabrication of bimetallic AuPt nanobrick spherical nanoarchitectonics for the oxygen reduction reaction

Bimetallic AuPt nanobrick spherical nanoarchitectonics synthesized via a one-step method show excellent ORR performance.