Metal Sulfides@Carbon Microfiber Networks for Boosting Lithium Ion/Sodium Ion Storage via a General Metal- Aspergillus niger Bioleaching Strategy

Cation/Anion Doping Strategy for Na4MnV(PO4)3 with High Energy Density and Long Cycling Life through Construction by Aspergillus niger

Na4MnV(PO4)3 (NMVP) has gained attention for its high redox potential, good cycling stability, and competitive price but suffers from poor intrinsic electronic conductivity and Jahn-Teller effect from Mn3+. In this work, cation/anion doping strategy was used for Aspergillus niger-bioderived carbon-coated NMVP (NMVP/AN) to improve the structural stability and electrochemical performance, where Al3+ doping inhibited the dissolution of Mn and enhanced the Mn3+/Mn2+ redox pair activity; besides, F- doping not only weakens the Na2-O bond but also endows the hierarchical and porous structure of NMVP/AN, which led to a more rapid and fluid transfer of Na+. The elaborately designed Na3.9Mn0.9Al0.1V(PO4)3/AN (NMAVP/AN) exhibits 105.9 mA h g-1 at 0.5 C, and the as-prepared Na3.1MnV(PO3.7F0.3)3/AN (NMVPF/AN) delivers 104.1 mA h g-1 at 5 C. Further demonstration of the hard carbon//NMAVP/AN full cell manifests the good potential of Al3+-doped NMVP/AN for practical applications (100.6 mA h g-1 at 1 C). These findings open up the possibility of unlocking the high-performance Na superionic conductor (NASICON).

Enhancing Kinetics in Sodium Super Ion Conductor Na3MnTi(PO4)3 through Microbe-Assisted and Structural Optimization

Sodium (Na) super ion conductor (NASICON) structure Na3MnTi(PO4)3 (NMTP) is considered a promising cathode for sodium-ion batteries due to its reversible three-electron reaction. However, the inferior electronic conductivity and sluggish reaction kinetics limit its practical applications. Herein, we successfully constructed a three-dimensional cross-linked porous architecture NMTP material (AsN@NMTP/C) by a natural microbe of Aspergillus niger (AsN), and the structure of different NMTP cathodes was optimized by adjusting different transition metal Mn/Ti ratios. Both approaches effectively altered the three-dimensional NMTP structure, not only improving electronic conductivity and controlling Na+ diffusion pathways but also enhancing the electrochemical kinetics of the material. The resultant AsN@NMTP/C-650, sintered at 650 °C, exhibits better electrochemical performance with higher reversible three-electron reactions corresponding to the voltage platforms of Ti4+/3+, Mn3+/2+, and Mn4+/3+ around 2.1, 3.6, and 4.1 V (vs Na+/Na), respectively. The capacity retention rate is up to 89.3% after 1000 cycles at a 2C rate. Moreover, a series of results confirms that the Na3.4Mn1.2Ti0.8(PO4)3 cathode has the most excellent electrochemical performance when the Mn/Ti ratio is 1.2/0.8, with a high capacity of 96.59 mAh g-1 and 97.1% capacity retention after 500 cycles.

Flexible Ti3 C2 Tx MXene Bonded Bio-Derived Carbon Fibers Support Tin Disulfide for Fast and Stable Sodium Storage

High energy density and flexible electrodes, which have high mechanical properties and electrochemical stability, are critical to the development of wearable electronics. In this work, a free-standing MXene bonded SnS2 composited nitrogen-doped carbon fibers (MXene/SnS2 @NCFs) film is reported as a flexible anode for sodium-ion batteries. SnS2 nanoparticles with high-capacity properties are covalently decorated in bio-derived nitrogen-doped 1D carbon fibers (SnS2 @NCFs) and further assembled with highly conductive MXene sheets. The addition of bacterial cellulose (BC) can further improve the flexibility of the film. The unique 3D structure of points, lines, and planes can not only offset the disadvantage of low conductivity of SnS2 nanoparticles but also expand the distance between MXene sheets, which is conducive to the penetration of electrolytes. More importantly, the MXene sheets and N-doped 1D carbon fibers (NCFs) can accommodate the large volume expansion of SnS2 nanoparticles and trap polysulfide during the cycle. The MXene/SnS2 @NCFs film exhibits better sodium storage and excellent rate performance compared to the SnS2 @NCFs. The in situ XRD and ex situ (XRD, XPS, and HRTEM) techniques are used to analyze the sodiation process and to deeply study the reaction mechanism of the films. Finally, the quasi-solid-state full cells with MXene/SnS2 @NCFs and Na3 V2 (PO4 )3 @carbon cloth (NVP@CC) fully demonstrate the application potential of the flexible electrodes.

Toward Sustainable All Solid-State Li-Metal Batteries: Perspectives on Battery Technology and Recycling Processes

Lithium (Li)-based batteries are gradually evolving from the liquid to the solid state in terms of safety and energy density, where all solid-state Li-metal batteries (ASSLMBs) are considered the most promising candidates. This is demonstrated by the Bluecar electric vehicle produced by the Bolloré Group, which is utilized in car-sharing services in several cities worldwide. Despite impressive progress in the development of ASSLMBs, their avenues for recycling them remain underexplored, and combined with the current explosion of spent Li-ion batteries, they should attract widespread interest from academia and industry. Here, the potential challenges of recycling ASSLMBs as compared to Li-ion batteries are analyzed and the current progress and prospects for recycling ASSLMBs are summarized and analyzed. Drawing on the lessons learned from Li-ion battery recycling, it is important to design sustainable recycling technologies before ASSLMBs gain widespread market adoption. A battery-recycling-oriented design is also highlighted for ASSLMBs to promote the recycling rate and maximize profitability. Finally, future research directions, challenges, and prospects are outlined to provide strategies for achieving sustainable development of ASSLMBs.

Progress, Key Issues, and Future Prospects for Li-Ion Battery Recycling

The overuse and exploitation of fossil fuels has triggered the energy crisis and caused tremendous issues for the society. Lithium-ion batteries (LIBs), as one of the most important renewable energy storage technologies, have experienced booming progress, especially with the drastic growth of electric vehicles. To avoid massive mineral mining and the opening of new mines, battery recycling to extract valuable species from spent LIBs is essential for the development of renewable energy. Therefore, LIBs recycling needs to be widely promoted/applied and the advanced recycling technology with low energy consumption, low emission, and green reagents needs to be highlighted. In this review, the necessity for battery recycling is first discussed from several different aspects. Second, the various LIBs recycling technologies that are currently used, such as pyrometallurgical and hydrometallurgical methods, are summarized and evaluated. Then, based on the challenges of the above recycling methods, the authors look further forward to some of the cutting-edge recycling technologies, such as direct repair and regeneration. In addition, the authors also discuss the prospects of selected recycling strategies for next-generation LIBs such as solid-state Li-metal batteries. Finally, overall conclusions and future perspectives for the sustainability of energy storage devices are presented in the last chapter.

Innovative Materials for Energy Storage and Conversion

The metal chalcogenides (MCs) for sodium-ion batteries (SIBs) have gained increasing attention owing to their low cost and high theoretical capacity. However, the poor electrochemical stability and slow kinetic behaviors hinder its practical application as anodes for SIBs. Hence, various strategies have been used to solve the above problems, such as dimensions reduction, composition formation, doping functionalization, morphology control, coating encapsulation, electrolyte modification, etc. In this work, the recent progress of MCs as electrodes for SIBs has been comprehensively reviewed. Moreover, the summarization of metal chalcogenides contains the synthesis methods, modification strategies and corresponding basic reaction mechanisms of MCs with layered and non-layered structures. Finally, the challenges, potential solutions and future prospects of metal chalcogenides as SIBs anode materials are also proposed.

Recent Advances in Biomass-Derived Carbon Materials for Sodium-Ion Energy Storage Devices

Compared with currently prevailing Li-ion technologies, sodium-ion energy storage devices play a supremely important role in grid-scale storage due to the advantages of rich abundance and low cost of sodium resources. As one of the crucial components of the sodium-ion battery and sodium-ion capacitor, electrode materials based on biomass-derived carbons have attracted enormous attention in the past few years owing to their excellent performance, inherent structural advantages, cost-effectiveness, renewability, etc. Here, a systematic summary of recent progress on various biomass-derived carbons used for sodium-ion energy storage (e.g., sodium-ion storage principle, the classification of bio-microstructure) is presented. Current research on the design principles of the structure and composition of biomass-derived carbons for improving sodium-ion storage will be highlighted. The prospects and challenges related to this will also be discussed. This review attempts to present a comprehensive account of the recent progress and design principle of biomass-derived carbons as sodium-ion storage materials and provide guidance in future rational tailoring of biomass-derived carbons.

Preparation of ZnS@N-doped-carbon composites via a ZnS-amine precursor vacuum pyrolysis route

ZnS/carbon nanocomposites have potential electrochemical applications due to their improved conductivity and more active sites through modification of the carbon materials. Herein, we report a facile method to synthesize the nanocomposites comprising ZnS nanoparticles and nitrogen-doped carbon (ZnS@NC). The inorganic–organic hybrid ZnS-amine material ZnS(ba) (ba = n-butylamine) is synthesized on a large scale by a reflux method, which effectively shortens the reaction time while maintaining the high yield compared with the solvothermal method. Then ZnS(ba) is used as precursor for obtaining ZnS@NC nanocomposites via a vacuum pyrolysis route, in which the content of carbon and nitrogen can be controlled by adjusting the pyrolysis temperature. Further, a series of ZnS-amine hybrid materials ZnS(ha), ZnS(en)_0.5 and ZnS(pda)_0.5 (ha = n-hexylamine; en = ethylenediamine; pda = 1,3-propanediamine) are synthesized and used as precursors for the preparation of ZnS@NC materials, indicating the universality of this method. Moreover, the as-synthesized ZnS@NC materials exhibit remarkable lithium storage performance with outstanding cycling stability, high-rate capability and remarkable pseudo-capacitance characteristics.

ZnS/N-doped-carbon nanocomposites exhibiting remarkable Li storage performance are facilely prepared through the temperature-controllable vacuum pyrolysis of various ZnS-amine precursors.

Ti3 C2 Tx MXene Conductive Layers Supported Bio-Derived Fex -1 Sex /MXene/Carbonaceous Nanoribbons for High-Performance Half/Full Sodium-Ion and Potassium-Ion Batteries

Owing to their cost-effectiveness and high energy density, sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs) are becoming the leading candidates for the next-generation energy-storage devices replacing lithium-ion batteries. In this work, a novel Fe_{x -1} Se_x heterostructure is prepared on fungus-derived carbon matrix encapsulated by 2D Ti₃ C₂ T_x MXene highly conductive layers, which exhibits high specific sodium ion (Na⁺ ) and potassium ion (K⁺ ) storage capacities of 610.9 and 449.3 mAh g^-1 at a current density of 0.1 A g^-1 , respectively, and excellent capacity retention at high charge-discharge rates. MXene acts as conductive layers to prevent the restacking and aggregation of Fe_{x -1} Se_x sheets on fungus-derived carbonaceous nanoribbons, while the natural fungus functions as natural nitrogen/carbon source to provide bionic nanofiber network structural skeleton, providing additional accessible pathways for the high-rate ion transport and satisfying surface-driven contribution ratios at high sweep rates for both Na/K ions storages. In addition, in situ synchrotron diffraction and ex situ X-ray photoelectron spectroscopy measurements are performed to reveal the mechanisms of storage and de-/alloying conversion process of Na⁺ in the Fe_{x -1} Se_x /MXene/carbonaceous nanoribbon heterostructure. As a result, the assembled Na/K full cells containing MXene-supported Fe_{x -1} Se_x @carbonaceous anodes possess stable large-ion storage capabilities.

Covalent Coupling-Stabilized Transition-Metal Sulfide/Carbon Nanotube Composites for Lithium/Sodium-Ion Batteries

Transition-metal sulfides (TMSs) powered by conversion and/or alloying reactions are considered to be promising anode materials for advanced lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). However, the limited electronic conductivity and large volume expansion severely hinder their practical application. Herein, we report a covalent coupling strategy for TMS-based anode materials using amide linkages to bind TMSs and carbon nanotubes (CNTs). In the synthesis, the thiourea acts as not only the capping agent for morphology control but also the linking agent for the covalent coupling. As a proof of concept, the covalently coupled ZnS/CNT composite (CC-ZnS/CNT) has been prepared, with ZnS nanoparticles (∼10 nm) tightly anchored on CNT bundles. The compact ZnS-CNT heterojunctions are greatly beneficial to facilitating the electron/ion transfer and ensuring structural stability. Due to the strong coupling interaction between ZnS and CNTs, the composite presents prominent pseudocapacitive behavior and highly reversible electrochemical processes, thus leading to superior long-term stability and excellent rate capability, delivering reversible capacities of 333 mAh g^-1 at 2 A g^-1 over 4000 cycles for LIBs and 314 mAh g^-1 at 5 A g^-1 after 500 cycles for SIBs. Consequently, CC-ZnS/CNT exhibits great competence for applications in LIBs and SIBs, and the covalent coupling strategy is proposed as a promising approach for designing high-performance anode materials.

Carbon-Reinforced Nb2CTx MXene/MoS2 Nanosheets as a Superior Rate and High-Capacity Anode for Sodium-Ion Batteries

Sodium-ion batteries operating at room temperature have emerged as a generation of energy storage devices to replace lithium-ion batteries; however, they are limited by a lack of anode materials with both an adequate lifespan and excellent rate capability. To address this issue, we developed Nb₂CT_x MXene-framework MoS₂ nanosheets coated with carbon (Nb₂CT_x@MoS₂@C) and constructed a robust three-dimensional cross-linked structure. In such a design, highly conductive Nb₂CT_x MXene nanosheets prevent the restacking of MoS₂ sheets and provide efficient channels for charge transfer and diffusion. Additionally, the hierarchical carbon coating has a certain level of volume elasticity and excellent electrical conductivity to guarantee the intercalation of sodium ions, facilitating both fast kinetics and long-term stability. As a result, the Nb₂CT_x@MoS₂@C anode delivers an ultrahigh reversible capacity of 530 mA h g^-1 at 0.1 A g^-1 after 200 cycles and very long cycling stability with a capacity of 403 mA h g^-1 and only 0.01% degradation per cycle for 2000 cycles at 1.0 A g^-1. Moreover, this anode has an outstanding capacity retention rate of approximately 88.4% from 0.1 to 1 A g^-1 in regard to rate performance. Most importantly, the Nb₂CT_x@MoS₂@C anode can realize a quick charge and discharge at current densities of 20 or even 40 A g^-1 with capacities of 340 and 260 mAh g^-1, respectively, which will increase the number of practical applications for sodium-ion batteries.

General Synthesis of Sulfonate-Based Metal-Organic Framework Derived Composite of Mx Sy @N/S-Doped Carbon for High-Performance Lithium/Sodium Ion Batteries

A general and simple strategy is realized for the first time for the preparation of metal sulfide (M_x S_y ) nanoparticles immobilized into N/S co-doped carbon (NSC) through a one-step pyrolysis method. The organic ligand 1,5-naphthalenedisulfonic acid in the metal-organic framework (MOF) precursor is used as a sulfur source, and metal ions are sulfurized in situ to form M_x S_y nanoparticles, resulting in the formation of M_x S_y /NSC (M=Fe, Co, Cu, Ni, Mn, Zn) composites. Benefiting from the M_x S_y nanoparticles and conductive carbon, a synergistic effect of the composite is achieved. For instance, the composite of Fe₇ S₈ /NSC as an anode displays excellent long-term cycling stability in lithium/sodium ion batteries. At 5 A g^-1 , large capacities of 645 mA h g^-1 and 426.6 mA h g^-1 can be retained after 1500 cycles for the lithium-ion battery and after 1000 cycles for the sodium-ion battery, respectively.

Elucidating the Mechanism of Li Insertion into Fe1-xS/Carbon via In Operando Synchrotron Studies

The detailed understanding of kinetic and phase dynamics taking place in lithium-ion batteries (LIBs) is crucial for optimizing their properties. It was previously reported that Fe_1-xS/C nanocomposites display a superior performance as anode materials in LIBs. However, the underlying lithium storage mechanism was not entirely understood during the 1st cycle. In this work, in operando synchrotron techniques are used to track lithium storage mechanisms during the 1st (de)-lithiation process in the Fe_1-xS/C nanocomposite. The combination of in operando techniques enables the uncovering of the phase fraction alternations and crystal structural variations on different length-scales. Additionally, the investigation of kinetic processes, morphological changes, and internal resistance dynamics is discussed. These results reveal that the phase transition of Fe_1-xS → Li₂Fe_1-xS₂ → Fe⁰ + Li₂S occurs during the 1st lithiation process. The redox reaction of Fe²⁺ + 2e^- ⇌ Fe⁰ and the Fe K-edge X-ray absorption spectroscopy (XAS) transformation process are confirmed by in operando XAS. During the 1st de-lithiation process, Fe⁰ and Li₂S convert to Li_2-yFe_1-xS₂ and Li⁺ is extracted from Li₂S to form Li_2-yS. The phase transition from Li₂S to Li_2-yS is not detected in previous reports. After the 1st de-lithiation process, amorphous lithiated iron sulfide nanoparticles are embedded within the remaining Li₂S matrix.

Novel Aggregation-Induced Emission Materials/Cadmium Sulfide Composite Photocatalyst for Efficient Hydrogen Evolution in Absence of Sacrificial Reagent

This work focuses on the development of a novel organic–inorganic photoactive material composited by aggregation-induced emission luminogens (AIE) and CdS. Tetraphenylethene-based AIE (TPE-Ca) is synthesized on CdS to form CdS/TPE-Ca electrode, due to its suitable band structure and potential capability of renewable energy production. The CdS/TPE-Ca electrode presents over three-fold improved photocurrent density and dramatically reduced interfacial resistance, compared with the pure CdS electrode. In addition, the engineering of the band alignment allows the holes to accumulate on the valance band of TPE-Ca, which would partially prevent the CdS from photo-corrosion, thus improving the stability of the sacrificial-free electrolyte photoelectrochemical cell.

Surface Modification of Fe7 S8 /C Anode via Ultrathin Amorphous TiO2 Layer for Enhanced Sodium Storage Performance

Iron sulfides with high theoretical capacity and low cost have attracted extensive attention as anode materials for sodium ion batteries. However, the inferior electrical conductivity and devastating volume change and interface instability have largely hindered their practical electrochemical properties. Here, ultrathin amorphous TiO₂ layer is constructed on the surface of a metal-organic framework derived porous Fe₇ S₈ /C electrode via a facile atomic layer deposition strategy. By virtue of the porous structure and enhanced conductivity of the Fe₇ S₈ /C, the electroactive TiO₂ layer is expected to effectively improve the electrode interface stability and structure integrity of the electrode. As a result, the TiO₂ -modified Fe₇ S₈ /C anode exhibits significant performance improvement for sodium-ion batteries. The optimal TiO₂ -modified Fe₇ S₈ /C electrode delivers reversible capacity of 423.3 mA h g^-1 after 200 cycles with high capacity retention of 75.3% at 0.2 C. Meanwhile, the TiO₂ coating is conducive to construct favorable solid electrolyte interphase, leading to much enhanced initial Coulombic efficiency from 66.9% to 72.3%. The remarkable improvement suggests that the interphase modification holds great promise for high-performance metal sulfide-based anode materials for sodium-ion batteries.

Interfacial effect of Co4S3–Co9S8 nanoparticles hosted on rGO sheets derived from molecular precursor pyrolysis on enhancing electrochemical behaviour

Co₄S₃–Co₉S₈ nanoparticles with abundant interfaces hosted on reduced graphene oxide were synthesized via a monomolecular pyrolysis strategy to boost catalytic activity.