Universal Nanoparticle Wetting Agent for Upscaling Perovskite Solar Cells

Application of nanosilica in the construction industry: A bibliometric analysis using Methodi Ordinatio

The number of publications related to the implementation of nanotechnology in the construction industry, and specifically to the application of nanosilica (SiO2), has had a constant increase in recent years. Based on this, in the present work, an analysis was carried out using bibliometric techniques, with the aim at characterizing the development of specialized literature and identifying the largest areas of growth in the field, maintaining hydrophobic nanosilica as the research guideline. This analysis acquired information from the Scopus and Web of Science (WoS) databases to compare bibliometric indicators of the publications. It should be noted that, even though bibliometric analysis is useful to identify the study areas of greatest interest, to complement this work, the implementation of a method that helped in the research process to obtain the most important bibliography was required. This study implemented Methodi Ordinatio, which helped to take a new direction. Therefore, based on this method, a list of articles cataloged and ranked is obtained, which is the basis for integrating the final bibliographic portfolio. •The study applies the Methodi Ordinatio to obtain a portfolio of the most relevant articles to guide the researchers' work.•Insightful information can be obtained using VOSviewer to analyze and visualize metadata of the bibliographic portfolio.•The study demonstrates how the alpha value in the InOrdinatio formula modifies the resulting portfolio.

Advances on the Application of Wide Band-Gap Insulating Materials in Perovskite Solar Cells

In recent years, the development of perovskite solar cells (PSCs) is advancing rapidly with their recorded photoelectric conversion efficiency reaching 25.8%. However, for the commercialization of PSCs, it is also necessary to solve their stability issue. In order to improve the device performance, various additives and interface modification strategies have been proposed. While, in many cases, they can guarantee a significant increase in efficiency, but not ensure improved stability. Therefore, materials that improve the device efficiency and stability simultaneously are urgently needed. Some wide band-gap insulating materials with stable physical and chemical properties are promising alternative materials. In this review, the application of wide band-gap insulating materials in PSCs, including their preparation methods, working roles, and mechanisms are described, which will promote the commercial application of PSCs.

Upscaling Inverted Perovskite Solar Cells: Optimization of Laser Scribing for Highly Efficient Mini-Modules

The upscaling of perovskite solar cells is one of the challenges that must be addressed to pave the way toward the commercial development of this technology. As for other thin-film photovoltaic technologies, upscaling requires the fabrication of modules composed of series-connected cells. In this work we demonstrate for the first time the interconnection of inverted modules with NiOx using a UV ns laser, obtaining a 10.2 cm2 minimodule with a 15.9% efficiency on the active area, the highest for a NiOx based perovskite module. We use optical microscopy, energy-dispersive X-ray spectroscopy, and transfer length measurement to optimize the interconnection. The results are implemented in a complete electrical simulation of the cell-to-module losses to evaluate the experimental results and to provide an outlook on further development of single junction and multijunction perovskite modules.

Nanoparticle Wetting Agent for Gas Stream-Assisted Blade-Coated Inverted Perovskite Solar Cells and Modules

Lab-scale perovskite solar cells (PSCs) have recently reached power conversion efficiencies (PCEs) of up to 25.2%. However, a reliable transfer of solution processing from spin coating to scalable printing techniques and a homogeneous deposition on large substrate sizes is challenging also caused by dewetting of the perovskite precursor solution on highly hydrophobic subjacent materials. In this work, we report the utilization of blade-coated nonconductive silicon oxide (SiO₂) nanoparticles (NPs) as wetting agent for the precursor solution to enable the deposition of a homogeneous perovskite layer on the nonwetting hole transport layer (HTL). The NPs enhance the HTL surface energy, thus, wetting and homogeneous spreading of the precursor solution is strongly improved so that pinholes in the perovskite layer are avoided. In addition, we apply this concept for the first time for gas stream-assisted blade coating of PSCs and modules in the inverted (p-i-n) device architecture with poly(triaryl amine) (PTAA) as HTL on large-area substrates. To prevent void formation at the HTL interface of gas stream-assisted blade coated perovskite layers, the effect of blending small amounts of lead chloride (PbCl₂) in the perovskite precursor solution is investigated, which also improves reproducibility and device performance. Following these optimizations, blade coated PSCs with 0.24 cm² active area achieve up to 17.9% PCE. Furthermore, to prove scalability, we show enlarged substrates of up to 9 × 9 cm² and analyze the homogeneity of the perovskite layer in blade coating direction. Moreover, by implementing the blade coated NP wetting agent, we fabricate large-area modules with a maximum PCE of 9.3% on 49.60 cm² aperture area. This represents a further important step bringing solution-processed inverted PSCs closer to application.

In Situ Passivation on Rear Perovskite Interface for Efficient and Stable Perovskite Solar Cells

Despite the rocketing rise in power conversion efficiencies (PCEs), the performance of perovskite solar cells (PSCs) is still limited by the carrier transfer loss at the interface between perovskite (PVSK) absorbers and charge transporting layers. Here, we propose a novel in situ passivation strategy by using [6,6]-phenyl-C₆₁-butyric acid methyl ester (PCBM) to improve the charge dynamics at the rear PVSK/CTL interface in the n-i-p structure device. A pre-deposited PCBM-doped PbI₂ layer is redissolved during PVSK deposition in our routine, establishing a bottom-up PCBM gradient that is facile for charge extraction. Meanwhile, the surface defects are in situ-passivated via PCBM-PVSK interaction, which substantially suppresses the trap-assisted recombination at the rear interface. Due to the synergistic effect of charge-extraction promotion and trap passivation, the fabricated PSCs deliver a champion PCE of 20.10% with attenuated hysteresis and improved long-term stability, much higher than the 18.39% of the reference devices. Our work demonstrates a promising interfacial engineering strategy for further improving the performance of PSCs.