CdTe QD-CeO2 Complex as a Strong Photoelectrochemical Signal Indicator for the Ultrasensitive microRNA Assay

Spatial-resolved and self-calibrated 3D-printed photoelectrochemical biosensor engineered by multifunctional CeO2/CdS heterostructure for immunoassay

A spatial-resolved and self-calibrated photoelectrochemical (PEC) biosensor has been fabricated by a multifunctional CeO2/CdS heterostructure, achieving portable and sensitive detection of carcinoembryonic antigen (CEA) using a homemade 3D printing device. The CeO2/CdS heterostructure with matched band structure is prepared to construct the dual-photoelectrodes to improve the PEC response of CeO2. In particular, as the photoactive nanomaterial, the CeO2 also plays the role of peroxidase mimetic nanozymes. Therefore, the catalytic performance of CeO2 with different morphologies (e.g., nano-cubes, nano-rods and nano-octahedra) have been studied, and CeO2 nano-cubes (c-CeO2) achieve the optimal catalytic activity. Upon introducing CEA, the sandwich-type immunocomplex is formed in the microplate using GOx-AuNPs-labeled second antibody as detection antibody. As a result, H2O2 can be produced from the catalytic oxidization of glucose substrate by GOx, which is further catalyzed by CeO2 to form •OH, thus in situ etching CdS and decreasing the photocurrents. The self-calibration is achieved by the dual-channel photoelectrodes on the homemade 3D printing device to obtain the photocurrents ratio, thus effectively normalizing the fluctuations of external factors to enhance the accuracy. This integrated biosensor with a detection limit as low as 0.057 ng mL-1 provides a promising way for ultrasensitive immunoassay in clinic application in complex environments.

Efficient sensitization of CdTe QDs towards PTCDA for sensitive photoelectrochemical Hg2+ assay

Herein, a sensitive photoelectrochemical (PEC) biosensor was designed for the detection of mercury ions (Hg2+) on the basis of the efficient sensitization of cadmium telluride quantum dots (CdTe QDs) towards 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA) and the significant quenching ability of a thymine-Hg2+-thymine (T-Hg2+-T) structure. The proposed CdTe QD/PTCDA sensitized structure was successfully constructed via continuous incubation of PTCDA and CdTe QDs on the glassy carbon electrode (GCE) interface, which embraced strong light absorption capacity and high carrier separation efficiency, giving rise to a remarkably improved initial photocurrent response. Notably, the PEC signal generated from the CdTe QD/PTCDA sensitized structure was almost fivefold higher than that of PTCDA owing to the efficient sensitization of CdTe QDs towards PTCDA. Once target Hg2+ ions were added, a T-rich S1 strand modified on the surface of 1-hexanethiol (HT)/S1/gold nanoparticles (Au NPs)/CdTe QDs/PTCDA/GCE immediately reacted with Hg2+ to produce multiple stable T-Hg2+-T structures. Therefore, the initial PEC signal would be considerably quenched by a high steric hindrance effect derived from the T-Hg2+-T structures. As a result, a quenched PEC response could achieve the detection of Hg2+ in concentrations ranging from 100 fM to 1000 nM. More importantly, the combination of the CdTe QDs/PTCDA sensitization structure and the T-Hg2+-T structure paves a promising pathway to developing a novel PEC biosensing platform for Hg2+ detection and also provides a favorable strategy for monitoring environmental pollution related to Hg2+.

Progress in quantum dot-based biosensors for microRNA assay: A review

MicroRNAs (miRNAs) are responsible for post-transcriptional gene regulation, and may function as valuable biomarkers for diseases diagnosis. Accurate and sensitive analysis of miRNAs is in great demand. Quantum dots (QDs) are semiconductor nanomaterials with superior optoelectronic features, such as high quantum yield and brightness, broad absorption and narrow emission, long fluorescence lifetime, and good photostability. Herein, we give a comprehensive review about QD-based biosensors for miRNA assay. Different QD-based biosensors for miRNA assay are classified by the signal types including fluorescent, electrochemical, electrochemiluminescent, and photoelectrochemical outputs. We highlight the features, principles, and performances of the emerging miRNA biosensors, and emphasize the challenges and perspectives in this field.

CdTe QD-decorated GO nanosheet heterojunction for efficient photocurrent generation and photocatalytic activity

Cadmium telluride quantum dot (CdTe QD)-decorated graphene oxide (GO) nanosheets are promising heterojunctions for the environmental remediation of organic pollutants in water. However, assembling these two materials is a challenge. For this purpose, we have developed a one-step approach for the decoration of QDs onto the surface of GO nanosheets/intercalation of QDs into GO nanosheets through self-assembly, resulting in the formation of sandwiched hybrid heterojunctions. After synthesis, the samples were analysed for variations in their structural, morphological, compositional, optical and photoelectrochemical characteristics using various analytical tools. Interlinking QDs and GO nanosheets enhanced the photocurrent generation (∼5.8 μA cm-2), resulting in faster electron transfer by delaying the decay time (58.25 ms). A higher rate constant value (k = 0.135 min-1) was obtained for degrading 93% MB dye in 20 min. This work demonstrates a cost-effective strategy for constructing CdTe QDs/GO nanosheet hybrid heterojunctions for potential application in the field of photocatalysis.

Dual cascade DNA walking-induced "super on" photocurrent response for constructing a novel antibiotic biosensing method

The construction of effective methods for the convenient testing of antibiotic residues in real samples has attracted considerable interest. Herein, we designed a dual cascade DNA walking amplification strategy and combined it with the controllable photocurrent regulation of a photoelectrode to develop a novel photoelectrochemical (PEC) biosensing method for antibiotic detection. The photoelectrode was prepared through the surface modification of a glassy carbon electrode with the TiO₂/CdS QDs nanocomposite synthesized by an in situ hydrothermal deposition method. The strong anodic PEC response of the nanocomposite could be well inhibited by the introduction of a silver nanoclusters (Ag NCs)-labeled DNA hairpin onto its surface. Upon the target biorecognition reaction, an Mg²⁺-dependent DNAzyme (MNAzyme)-driven DNA walking was triggered to release another MNAzyme strand-linked streptavidin (SA) complex. As this SA complex could serve as a four-legged DNA walker, its cascade walking on the electrode surface not only released Ag NCs but also caused the linking of Rhodamine 123 with the electrode to realize the "super on" photocurrent output. By using kanamycin as the model analyte, this method showed a very wide linear range from 10 fg mL^-1 to 1 ng mL^-1 and a very low detection limit of 0.53 fg mL^-1. Meanwhile, the simple photoelectrode preparation and the aptamer recognition-based autonomous DNA walking resulted in the convenient manipulation and excellent repeatability. These unique performances determine the great potential of the proposed method for practical applications.

Signal Amplification-Based Biosensors and Application in RNA Tumor Markers

Tumor markers are important substances for assessing cancer development. In recent years, RNA tumor markers have attracted significant attention, and studies have shown that their abnormal expression of post-transcriptional regulatory genes is associated with tumor progression. Therefore, RNA tumor markers are considered as potential targets in clinical diagnosis and prognosis. Many studies show that biosensors have good application prospects in the field of medical diagnosis. The application of biosensors in RNA tumor markers is developing rapidly. These sensors have the advantages of high sensitivity, excellent selectivity, and convenience. However, the detection abundance of RNA tumor markers is low. In order to improve the detection sensitivity, researchers have developed a variety of signal amplification strategies to enhance the detection signal. In this review, after a brief introduction of the sensing principles and designs of different biosensing platforms, we will summarize the latest research progress of electrochemical, photoelectrochemical, and fluorescent biosensors based on signal amplification strategies for detecting RNA tumor markers. This review provides a high sensitivity and good selectivity sensing platform for early-stage cancer research. It provides a new idea for the development of accurate, sensitive, and convenient biological analysis in the future, which can be used for the early diagnosis and monitoring of cancer and contribute to the reduction in the mortality rate.

Quantum Dots for Cancer-Related miRNA Monitoring

Quantum dots (QDs) possess exceptional optoelectronic properties that enable their use in the most diverse applications, namely, in the medical field. The prevalence of cancer has increased and has been considered the major cause of death worldwide. Thus, there has been a great demand for new methodologies for diagnosing and monitoring cancer in cells to provide an earlier prognosis of the disease and contribute to the effectiveness of treatment. Several molecules in the human body can be considered relevant as cancer markers. Studies published over recent years have revealed that micro ribonucleic acids (miRNAs) play a crucial role in this pathology, since they are responsible for some physiological processes of the cell cycle and, most important, they are overexpressed in cancer cells. Thus, the analytical sensing of miRNA has gained importance to provide monitoring during cancer treatment, allowing the evaluation of the disease's evolution. Recent methodologies based on nanochemistry use fluorescent quantum dots for sensing of the miRNA. Combining the unique characteristics of QDs, namely, their fluorescence capacity, and the fact that miRNA presents an aberrant expression in cancer cells, the researchers created diverse strategies for miRNA monitoring. This review aims to present an overview of the recent use of QDs as biosensors in miRNA detection, also highlighting some tutorial descriptions of the synthesis methods of QDs, possible surface modification, and functionalization approaches.

Organic-Inorganic Hybrid Flower-Shaped Microspheres Applied in Photoelectrochemical Sensing

Organic-inorganic hybrid materials are rarely applied in photoelectrochemical (PEC) sensing because of the serious charge-carrier recombination in organic conjugated polymers. In this work, a series of poly(3,4-ethylenedioxythiophene) (PEDOT)/ZnIn2S4 hybrid flower-shaped microspheres were synthesized using ionic liquids (ILs) as the supporting electrolyte for EDOT electropolymerization and as the regulating reagent for controlling ZnIn2S4 growth, respectively. It was found that the hybrid material [HOEMIM]NTf2-PEDOT/[HOEMIM]BF4-ZnIn2S4 ([HOEMIM]+: 1-hydroxyethyl-3-methylimidazolium cation; NTf2-: bis(trifluoromethanesulfonyl)amide) was the optimal one, with a smooth, transparent, and continuous polymer film covering the uniform and ordered cross-linked nanosheet arrays. The hybrid material could produce a high anodic photocurrent, which was about 78 times as high as that produced by the [HOEMIM]BF4-ZnIn2S4. The enhancement effect should be the highest among all the organic-inorganic hybrid materials reported so far. This was related to its unique micromorphology structure, p-n heterojunction, and the coexisting ILs, which restrained the charge-carrier recombination in PEDOT and enhanced PEDOT sensitization to ZnIn2S4. Then, a carcinoembryonic antigen PEC immunosensor was constructed based on the photoanodic sensing platform, and it exhibited good performance. Furthermore, the [HOEMIM]BF4-ZnIn2S4 was treated with NaClO solution to create the [HOEMIM]NTf2-PEDOT/[HOEMIM]BF4-S-ZnwInxSyOz general platform for both photoanodic and photocathodic sensing. As a proof of concept, L-cysteine and dissolved oxygen were used as models for photoanodic and photocathodic sensing, respectively. The results demonstrated that the general PEC platform was quite competent. This work opens up a window for the design of organic-inorganic hybrid PEC materials and will promote the application of such hybrid materials in PEC biosensing.

Ultrasensitive electrochemical detection of miRNA based on polymerization signal amplification

The detection of trace tumor-related serum miRNA biomarkers is in great demand for the early diagnosis of cancer. Herein, for the first time, an electrochemical sensing platform based on atom transfer radical polymerization (ATRP) signal amplification strategy for ultrasensitive determination of the breast and prostate cancer marker miRNA-141 has been developed. The hairpin DNAs were immobilized on the benzoic acid modified electrode to capture the target miRNA-141, the recognition of miRNA-141 released thiol groups on the end of probes, followed by the association of ATRP initiators modified gold nanoparticles with thiol groups, and then triggered the polymerization on electrode surface, causing a great number of ferrocene (Fc) signal molecules grafted on the sensor interface. As a result, the electrochemical signal intensity of signal molecule has been greatly increased. The proposed biosensor has a linear range from 10 pM to 10 aM with a detection limit of 3.23 aM for miRNA-141, opening a new and promising path for ultrasensitive analysis of tumor-related miRNAs.

Construction of a Polarity-Switchable Photoelectrochemical Biosensor for Ultrasensitive Detection of miRNA-141

As an early-stage tumor biomarker, microRNA (miRNA) has clinical application potential and its sensitive and accurate detection is significant for early tumor diagnosis. In this study, a photoelectrochemical (PEC) biosensing platform was fabricated for ultrasensitive miRNA-141 detection, which is based on a photocurrent polarity-switchable system using CdS quantum dots (QDs) in the presence of a 5,10,15,20-tetrakis (4-aminophenyl)-21H,23H-porphine (Tph-2H)-coated glassy carbon electrode (GCE). As an excellent photoactive material, Tph-2H has a narrow band gap that effectively gathers photoelectrons under visible light irradiation and improves the transfer ability of photogenerated electrons. Further, the detection sensitivity of miRNA-141 could be significantly improved by combining an enzyme-assisted recycle amplification reaction and a magnetic bead-based separation strategy. The proposed photocurrent polarity-switchable PEC biosensor could efficiently eliminate the false-positive or false-negative signals and achieve a wide linear response range from 1 fM to 1 nM with a low detection limit of 0.33 fM for miRNA-141, providing a potentially alternative solution for detecting other biomarkers in bioanalysis and clinical diagnosis.

Detection of Hg2+ by a Dual-Fluorescence Ratio Probe Constructed with Rare-Earth-Element-Doped Cadmium Telluride Quantum Dots and Fluorescent Carbon Dots

Quantum dots (QDs) and carbon quantum dots (CDs) are classes of zero-dimensional materials whose sizes can be ≤10 nm. They exhibit excellent optical properties and are widely used to prepare fluorescent probes for qualitative and quantitative detection of test objects. In this article, we used cerium chloride as the cerium source and used the in situ doped cerium (rare-earth element) to develop cadmium telluride (CdTe) quantum dots following the aqueous phase method. CdTe: Ce quantum dots were successfully synthesized. The solution of CdTe:Ce QDs was mixed with the CD solution prepared following the green microwave method to form a ratio fluorescence sensor that can be potentially used for the selective detection of mercury ions (Hg²⁺). We used transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, and other microscopy and spectral characterization techniques to validate that Ce had been successfully doped. The test results on the fluorescence performance revealed that Ce doping enhances the predoped fluorescence performance of the CdTe QDs. We have quantitatively detected Hg²⁺ using a ratiometric fluorescence sensor to show that in the range of 10-60 nM, the fluorescence quenching efficiency increases linearly with the increase in Hg²⁺ concentration. The linear correlation coefficient R ² = 0.9978, and its detection limit was found to be 2.63 nM L^-1. It was observed that other interfering ions do not significantly affect the fluorescence intensity of the probe. According to the results of the blank addition experiment, the developed proportional fluorescence probe can be used for the detection of Hg²⁺ in actual samples.

Introducing visible-light sensitivity into photocatalytic CeO2 nanoparticles by hybrid particle preparation exploiting plasmonic properties of gold: enhanced photoelectrocatalysis exemplified for hydrogen peroxide sensing

In this report we combine the catalytic properties of CeO₂ nanoparticles with their transduction ability for photoelectrochemical sensing. This study highlights the usage of CeO₂ providing catalytic activity towards H₂O₂, but only with a limited excitation range in the UV for the construction of a sensing system. In order to improve the photoelectrocatalysis of CeO₂ nanoparticles by extending their excitation to visible light, Au/CeO₂ core/shell hybrid nanoparticles have been synthesized. The hybrid nanoparticles are fixed on electrodes, allowing for the generation of photocurrents, the direction of which can be controlled by the electrode potential (without bias). The application of the hybrid nanoparticles results in an enhanced photocurrent amplitude under white light illumination as compared to the pure CeO₂ nanoparticles. Wavelength-dependent measurements confirm the participation of the Au core in the signal transduction. This can be explained by improved charge carrier generation within the hybrid particles. Thus, by using a plasmonic element the photoelectochemical response of a catalytic nanoparticle (i.e. CeO₂) has been spectrally extended. The effect can be exploited for sensorial hydrogen peroxide detection. Here higher photocatalytic current responses have been found for the hybrid particles fixed to gold electrodes although the catalytic reduction has been comparable for both types of nanoparticles. Thus, it can be demonstrated that Au/CeO₂ core-shell nanoparticles allow the utilization of visible light for photoelectrochemical hydrogen peroxide (H₂O₂) detection with improved sensitivity under white light illumination or application of such particles with only visible light excitation, which is not possible for pure CeO₂. With help of the layer-by-layer (LbL) technique for nanoparticle immobilization, the electrode response can be adjusted and with a 5 layers electrode a low detection limit of about 3 μM H₂O₂ with a linear detection range up to 2000 μM is obtained.

Ultrasensitive DNA Detection Based on Inorganic-Organic Nanocomposite Cosensitization and G-Quadruplex/Hemin Catalysis for Signal Amplification

A novel photoelectrochemical (PEC) aptasensor was fabricated for DNA detection based on the coupling of cosensitization and peroxidase-like catalytic activity. Specifically, the surfaces of branched-TiO₂ nanorods (B-TiO₂ NRs) were modified with Cd²⁺ and S²⁺ to obtain B-TiO₂ NRs/CdS hybrid structures, which were subsequently used as matrices to immobilize hairpin DNA (hDNA) probes. CdTe/TCPP (TCPP = meso-tetra(4-carboxyphenyl)-porphine) used for signal amplification was labeled on the terminal of the hDNA probe. Without the target DNA (tDNA) presence, the immobilized hDNA probe with CdTe/TCPP possessed a hairpin form and was located near the B-TiO₂ NRs/CdS electrode surface, forming a cosensitized structure formation and then generating strong photocurrent with H₂O₂ as the electron donor. During detection, the specific recognition of tDNA by the sensing hDNA probe triggered the formation of the G-quadruplex/hemin DNAzyme, which effectively catalyzed the decomposition of H₂O₂. Meanwhile, cosensitization disappeared when the hDNA probe hybridized with tDNA, further reducing the photocurrent. With a double-signal amplification strategy, the sensing platform designed in this work demonstrated a linear detection ability in the 0.5 fM-5 nM range with a detection limit equal to 0.14 fM. Notably, through encoding in the base sequences of the hDNA and marking it, a versatile PEC platform could be structured for the detection of various DNA targets, which could promise applications in point-of-care diagnostic fields.

Label-free and "signal-on" homogeneous photoelectrochemical cytosensing strategy for ultrasensitive cancer cell detection

We report a label-free and "signal-on" homogeneous photoelectrochemical cytosensing system for ultrasensitive detection of cancer cells, which is a truly homogeneous PEC cytosensing system without the photoactive material immobilization and target recognition probe modification, providing a new avenue in early and accurate cancer diagnosis and clinical analysis.

Cardiac troponin I photoelectrochemical sensor: {Mo368} as electrode donor for Bi2S3 and Au co-sensitized FeOOH composite

A suitable electron donor, which guarantees the stability of the whole system, is considered as the driving force of the PEC sensor. Nowadays, searching appropriate electron donor is still one of the orientations to explorate in the field of sensor. Na₄₈[H₄₉₆Mo₃₆₈O₁₄₆₄S₄₈]·ca.1000H₂O (abbr. {Mo₃₆₈}), as a type of polyoxometalate, has perfect morphology, definite size and unique electronic property. Due to the prominent water solubility, {Mo₃₆₈} usually releases small cations and exists as large anions in the ultrapure water. The interesting property endows {Mo₃₆₈} with excellent reducibility, which provides great feasibility to become an outstanding electron donor. In addition, FeOOH prepared through a simple operation owns high adsorption capacity, which ensures the fastness of other materials. Subsequently, the narrow band-gap of Bi₂S₃ and the unique noble metal properties of Au nanoparticles are utilized to co-sensitize FeOOH to improve the light-harvesting capability and photoelectric conversion efficiency. Combined with the specificity recognition of antigen and antibody, a novel photoelectrochemical sensor is constructed with a wide detection range of 1.00 pg mL^-1 - 100 ng mL^-1 and low detection limit (0.76 pg mL^-1), which achieves the sensitive detection of cardiac troponin I in early diagnosis of cardiovascular disease.

Zinc and Molybdenum Co-Doped BiVO4 Nanoarray for Photoelectrochemical Diethylstilbestrol Analysis Based on the Dual-Competitive System of Manganese Hexacyanoferrate Hydrate Nanocubes

This study proposes a competitive photoelectrochemical (PEC) immunosensor for detecting diethylstilbestrol (DES). The PEC sensing platform uses a zinc and molybdenum codoped BiVO₄ nanoarray ((Zn,Mo):BiVO₄) as the photoactive matrix and manganese hexacyanoferrate hydrate loading silicon dioxide layer composite nanocubes (MHCF@SiO₂ NCs) as the signal quencher. The (Zn,Mo):BiVO₄ nanoarray demonstrated brilliant PEC behavior, by virtue of the local electric field formed by the codoped Zn and Mo. This doping accelerated the electron transfer and improved the photoelectric conversion efficiency in BiVO₄ nanoarray under visible light. Furthermore, the nanoarray structure with its large surface area provided abundant binding sites for the immune response. As the MHCF@SiO₂ NCs-anti-DES competitively bonded with either free DES or bovine serum albumin conjugated DES (BSA-DES), hydrogen peroxide (H₂O₂) as electron donor was competitively consumed and meanwhile steric resistance blocked electrons transfer. For the above reasons, the photocurrent signal was reduced. Thus, the standard sample free DES was accurately detected, and the fabricated PEC immunosensor displayed an outstanding photocurrent response from 0.1 pg/mL to 50 ng/mL with a detection limit of 0.05 pg/mL. Simultaneously, the acceptable stability, selectivity, and reproducibility of the designed dual-competitive sensing platform suggest its applicability to small molecule detection.

68Ga CdTe/CdS fluorescent quantum dots for detection of tumors: investigation on the effect of nanoparticle size on stability and in vivo pharmacokinetics

Background

Quantum dots (QDs)-based theranostics offer exciting new approaches to diagnose and therapy of cancer. To take advantage of the unique properties of these fluorescent QDs for different biomedical applications, their structures, size and/or surface chemistry need to be optimized, allowing their stability and functionalities to be tailored for different biomedical applications.

Methodology

Cadmium telluride/Cadmium sulfide QDs (CdTe/CdS QDs) were synthesized and their structure, size, photostability and functionalities as a bioprobe for detection of Fibrosarcoma tumors were studied and compared with Cadmium telluride (CdTe) QDs. Hence, CdTe/CdS QDs were labeled with 68Ga radionuclide for fast in vivo biological nuclear imaging. Using gamma paper chromatography (γ-PC), the physicochemical properties of the prepared labeled QDs were assessed. In vivo biodistribution and positron emission tomography (PET) imaging of the 68Ga@ CdTe/CdS QDs nanocrystals were investigated in Sprague Dawley® rats bearing Fibrosarcoma tumor.

Results

CdS shell on the surface of CdTe core increases the size and photostability against high energy radiations; therefore, CdTe/CdS QDs show prolonged fluorescence as compared to CdTe QDs.

Conclusion

Excellent accumulation in tumor was observed for core/shell quantum dots, but this study showed that small changes in the size of the QDs (+1 nm), after adding the CdS shell around CdTe core, greatly change their biodistribution (especially the liver uptake).

Iron phosphorus trichalcogenide ultrathin nanosheets: enhanced photoelectrochemical activity under visible-light irradiation

Exploiting novel visible-light sensitive materials for the photoelectrochemical (PEC) technique is deeply meaningful for energy conversion and analytic detection. Owing to the tunable bandgap structure and strong absorption of visible light, the rising-star two-dimensional (2D) metal phosphorus trichalcogenide (MPX₃) nanomaterials are expected to be promising photochemical sensitizers toward PEC biosensors. Moreover, guided by DFT calculations, the FePS₃ nanosheets possessed a narrower bandgap than the bulk form, thereby enabling high availability of visible-light absorption for the FePS₃ nanosheets. In this work, 2D FePS₃ nanosheets were successfully synthesized by a facile salt-templated method. By tuning the proportion of the salt template, the thickness of the FePS₃ nanosheets could be manipulated. As a result, the FePS₃ nanosheets exhibited an obviously enhanced photoelectrochemical behavior with visible light and sensitive detection towards glucose. Being the first experimental report regarding the MPS₃ nanosheets toward PEC activity, our finding can be an essential stepping stone in the pursuit of the further exploration of other 2D materials for the PEC technology.

Beta-cyclodextrin-functionalized CdS nanorods as building modules for ultrasensitive photoelectrochemical bioassay of HIV DNA

Nowadays, acquired immunodeficiency syndrome has become a formidable danger to human health, and its early diagnosis is urgent need with the increasing quantity of patients around the world. Herein, we first synthesized beta-cyclodextrin-functionalized CdS nanorods (β-CD@CdS NRs) with high stability and desirable photo-electricity activity, and served as easy-to-assemble building modules to design a novel photoelectrochemical biosensor for human immune deficiency virus (HIV) DNA detection by coupling with catalytic hairpin assembly (CHA)-mediated biocatalytic precipitation and the host-guest interaction between adamantine (ADA) and β-CD. In the presence of HIV DNA, CHA process was triggered with the aid of hairpin DNA1 and ADA-labelled hairpin DNA2, and then generated large amounts of G-quadruplex, which could be formed hemin/G-quadruplex DNAzyme to catalyze 4-chloro-1-naphthol to generate insoluble precipitation on photoelectrode surface, followed by the decreased photocurrent response due to the corresponding stereo-hindrance effect. Under optimized conditions, this biosensor exhibited wide linear dynamic range (10 fM - 1 nM) and low detection limit of 1.16 fM, as well as high sensitivity, excellent stability, and satisfactory feasibility in human-serum samples. Moreover, the prepared β-CD@CdS NRs could be applied to the construction of other advanced sensing platform, showing great prospect in clinical diagnostics.

p-n-Sensitized Heterostructure Co3O4/Fullerene with Highly Efficient Photoelectrochemical Performance for Ultrasensitive DNA Detection

Significantly sensitized architectures meeting the requirements of high photoelectric conversion efficiency and promising photocurrent intensity are extremely desirable, but challenges in sensitizer development and efficiency in photoelectrochemical (PEC) fields remain. In this paper, the p-type metal oxide semiconductor Co₃O₄ was attached as an effective photosensitizer to n-type fullerene C₆₀ in view of appropriately matched energy band levels to form the highlighted p-n-sensitized heterostructure Co₃O₄/fullerene, with facilitated charge separation and accelerated carrier mobility. Compared with traditional p-n heterostructure, the p-n-sensitized heterostructure Co₃O₄/fullerene illustrated a wider range for light absorption with further enhanced light-harvesting capability, thereby leading to more exceptional PEC performance containing remarkably promoted photoelectric conversion efficiency and improved photocurrent intensity. Impressively, the photocurrent intensity obtained by Co₃O₄/fullerene was about sixfold higher than that of fullerene alone, and this achievement was quite favored compared to the reported works for fullerene sensitization, which could be responsible for the advancement of detection sensitivity for the subsequently constructed biosensor. Unambiguously, given the p-n-sensitized heterostructure Co₃O₄/fullerene of high PEC activity, the well-fabricated three-dimensional DNA walker applied as a target-cascade signal amplification strategy, and the Au layer employed as the specific linker between the photoactive material and the signal amplification product, a smart PEC biosensor was successfully enabled for ultrasensitive investigation of the model DNA (a fragment of the p53 gene), showing a wide linear range of 60 to 1 × 10⁵ aM and a detection limit of 20 aM. This proposed PEC biosensor provided acceptable insights into the clinic analysis, disease therapies, and other relevant subjects.

Recent developments of photoelectrochemical biosensors for food analysis

Recent developments of photoelectrochemical biosensors for food analysis are summarized and the future prospects in this field are discussed.

Construction of a Z-scheme g-C3N4/Ag/AgI heterojunction for highly selective photoelectrochemical detection of hydrogen sulfide

We report the photoelectrochemical detection of hydrogen sulfide based on the transformation of the Z-scheme g-C₃N₄/Ag/AgI heterojunction to C₃N₄/Ag/Ag₂S.