Hydrogelation Landscape Engineering and a Novel Strategy To Design Radically Induced Healable and Stimuli-Responsive Hydrogels

High strength, self-healing sensitive ionogel sensor based on MXene/ionic liquid synergistic conductive network for human-motion detection

Ionogels with both high strength and high conductivity for wearable strain and pressure dual-mode sensors are needed for human motion and health monitoring. Here, multiple hydrogen bonds are introduced through imidazolidinyl urea (IU) as a chain extender to provide high mechanical and self-healing properties for the water-borne polyurethane (WPU). The MXene/ionic liquids synergistic conductive network provides excellent conductivity and also reduces the relative content of ionic liquids to maintain the mechanical properties of the ionogels. The mechanical strength of this ionogel reached 1.81-2.24 MPa and elongation at break reached 570-624%. It also has excellent conductivity (22.7-37.5 mS m-1), gauge factor (GF) (as a strain sensor, GF = 1.8), sensitivity (S) (as a press sensor, S1 = 29.8 kPa-1, S2 = 1.3 kPa-1), and fast response time (as a strain sensor = 185 ms; as a press sensor = 204 ms). The ionogel also exhibits rapid photothermal self-healing capabilities due to the inherent photothermal behavior of MXene. It can maintain good elasticity and conductivity at low temperatures. In addition, this ionogel is able to stretch for 1200 cycles without significant change in the relative change of resistance. The ionogel can be assembled as a strain sensor for monitoring human motion and as a pressure sensor array for obtaining pressure magnitude and position information.

Photoresponsive hydrogel-based soft robot: A review

Soft robots have received a lot of attention because of their great human-robot interaction and environmental adaptability. Most soft robots are currently limited in their applications due to wired drives. Photoresponsive soft robotics is one of the most effective ways to promote wireless soft drives. Among the many soft robotics materials, photoresponsive hydrogels have received a lot of attention due to their good biocompatibility, ductility, and excellent photoresponse properties. This paper visualizes and analyzes the research hotspots in the field of hydrogels using the literature analysis tool Citespace, demonstrating that photoresponsive hydrogel technology is currently a key research direction. Therefore, this paper summarizes the current state of research on photoresponsive hydrogels in terms of photochemical and photothermal response mechanisms. The progress of the application of photoresponsive hydrogels in soft robots is highlighted based on bilayer, gradient, orientation, and patterned structures. Finally, the main factors influencing its application at this stage are discussed, including the development directions and insights. Advancement in photoresponsive hydrogel technology is crucial for its application in the field of soft robotics. The advantages and disadvantages of different preparation methods and structures should be considered in different application scenarios to select the best design scheme.

Green Hydrogel Synthesis: Emphasis on Proteomics and Polymer Particle-Protein Interaction

The field of drug discovery has seen significant progress in recent years. These advances drive the development of new technologies for testing compound's effectiveness, as well as their adverse effects on organs and tissues. As an auxiliary tool for drug discovery, smart biomaterials and biopolymers produced from biodegradable monomers allow the manufacture of multifunctional polymeric devices capable of acting as biosensors, of incorporating bioactives and biomolecules, or even mimicking organs and tissues through self-association and organization between cells and biopolymers. This review discusses in detail the use of natural monomers for the synthesis of hydrogels via green routes. The physical, chemical and morphological characteristics of these polymers are described, in addition to emphasizing polymer-particle-protein interactions and their application in proteomics studies. To highlight the diversity of green synthesis methodologies and the properties of the final hydrogels, applications in the areas of drug delivery, antibody interactions, cancer therapy, imaging and biomarker analysis are also discussed, as well as the use of hydrogels for the discovery of antimicrobial and antiviral peptides with therapeutic potential.

Self-Assembled Copper Metallogel Bearing Terpyridine and Its Application as a Catalyst for the Click Reaction in Water

Metallogels have attracted a great deal of interest because of their intriguing properties and applications in chemsensors, batteries, catalysis, and other fields. In this work, a novel ligand bearing terpyridine and hydroxyamine units was designed and synthesized. The ligand selectively gelated with copper ions in water by heating and cooling or sonication. Different physicochemical studies [Fourier transform infrared, ultraviolet-visible (UV-vis), electron paramagnetic resonance (EPR), scanning electron microscopy, X-ray diffraction, and rheology] were conducted to characterize the gels. We show that coordination interaction, π-π interaction, and noncovalent interaction had obvious effects on the properties of the gel. Additionally, a stable radical hydrogel could be obtained by ultrasound treatment, which was accompanied by color variation from green to blue. This was further confirmed by UV-vis and EPR experiments. Furthermore, the copper metallogels were developed as catalysts for the preparation of 1,2,3-triazole derivatives in water at 25 °C. Although various types of catalysts have been investigated, the use of metallogels as catalysts for the click reaction in water has been scarce. This strategy shows the process is simple, affords a high yield, and is "green" and economical.

Switchable Supramolecular Configurations of Al3+/LysTPY Coordination Polymers in a Hydrogel Network Controlled by Ultrasound and Heat

Coordination-driven self-assembly with controllable properties has attracted increasing interest because of its potential in biological events and material science. Herein, we report on the remote, instant, and switchable control of competitive coordination interactions via ultrasound and heat stimuli in a hydrogel network. Configurational coordination changes result in the transformation of blue-emissive and opaque Al³⁺-amide aggregations to yellow-green-emissive and transparent Al³⁺-terpyridine aggregations. Interestingly, circularly polarized luminescence "off-on" switches of the metallo-supramolecular assembly are also created by these configuration changes. Additionally, the impact of the stoichiometric ratio of Al³⁺ and LysTPY on the assembly is also studied in detail. With a higher content of Al³⁺, the hydrogel with branched and abundant junctions exhibited robust, self-healing, and self-supporting properties. This in-depth understanding of the coordination interaction adjustment will afford new insights into the preparation of stimuli-responsive metallogels.

Structural Tunability on Naphthalimide-Based Dendrimer Gelators via Glaser Coupling Interaction with Tailored Gelation Solvent Polarity and Stimuli-Responsive Properties

To date, most of the low-molecular-weight gels are found serendipitously, and modification on known gelator structures via organic synthesis is an efficient methodology to prepare gel series. However, a simple, direct, and rational modification method for a known gelator is still a challenge. Herein, we employ Glaser coupling reaction to synthesize a novel dendrimer gelator BisDEC with the (ALS₂)₂ structure, starting from terminal alkyne-based gelator DEC with the ALS₂ structure. This structural change results in gels with distinct gelation solvents, mechanical properties, and stimuli-responsive abilities. The gelation abilities of DEC and BisDEC in nonpolar and polar solvents, respectively, have been examined and discussed by several experiments and Hansen constants. It is also shown that the BisDEC gel system shows intriguing self-healing, self-supporting, and grinding chromism properties.

In Situ Self-Assembly of Nanoparticles into Waxberry-Like Starch Microspheres Enhanced the Mechanical Strength, Fatigue Resistance, and Adhesiveness of Hydrogels

Owing to the diminishing resources and growing awareness of environmental issues, significant scientific attention has been paid to the development of physical gel materials using renewable and low-cost natural resources. Inspired by the strengthened mechanism of double-network and nanocomposite (NC) gels, we report a facile and green method to realize a mechanically stiff, fatigue-resistant, and adhesive-debranched waxy corn starch/poly(vinyl alcohol) double-crosslinked NC gel (W-Gel) skeleton material with dynamic noncovalent bonds. The in situ formation of debranched starch nanoparticles leads to self-assembly into three-dimensional waxberry-like microspheres, which act as physical cross-linkers by embedding themselves within network skeleton structures. The resulting hydrogel exhibited an excellent mechanical behavior, including a good stretchability over 1200% strain, a maximum compressive strength of up to 780.7 ± 27.8 kPa, and the ability to sustain as much weight as 4.6 kg (about 2000 times its own weight). Notably, the recovery efficiency exceeded 93% after the 60th compressive successive loading-unloading cycle at 50% strain. The hydrogel successfully adhered onto soft and hard substrates, such as skins, plastics, gauzes, glasses, and metals, manifesting in long-term, stable, sustained release of epigallocatechin gallate (EGCG). The EGCG-loaded W-Gels exhibited predominant antibacterial activity against both Gram-positive bacteria (Staphylococcus aureus) and Gram-negative bacteria (Escherichia coli and Salmonella typhus).

Redox-Responsive Colloidal Particles Based on Coordination Polymers Incorporating Viologen Units

Colloidal particles based on supramolecular polymers are emerging as promising functional materials because of their intrinsic dynamic features and the possibility of stimuli responsivity. In this work, ≈200 nm self-assembled redox-responsive colloidal particles made of 1D-coordination polymers were readily prepared. In these metallopolymers, organic entities made of bis(viologen) groups covalently associated with terpyridine units are spontaneously bridged by Zn²⁺ cations through the formation of coordination bonds. The properties of these particles were analyzed and their redox activities investigated. Upon reduction of the viologen units, the formation of π-dimers between the reduced viologen moieties was demonstrated by spectroscopic experiments. It was shown that intermolecular π-dimers (i.e., between different polymer chains) that do not exist in homogeneous polymer solutions were, nevertheless, formed in the particle's structure because of the effects of confinement. The presence of these π-dimers allows stabilization of the charge in the colloids.

An Li+-enriched Co2+-induced metallogel: a study on thixotropic rheological behaviour and conductance

An alkali base and counterion-selective red metallogel (1% w/v) has been synthesized by mixing the adipic acid-derived ligand H₂AL with LiOH, followed by the addition of 1 equivalent of Co(OAc)₂ in DMF. The addition of Co(OAc)₂ not only resulted in the formation of a 2 : 2 (M : L) complex, but also led to the consecutive steps of aggregation, fiber creation, entrapment of the solvent and eventually gelation. The metallogel formation and the mechanism behind gelation have been well characterized and established using various instrumental techniques such as FTIR spectroscopy, UV-vis spectroscopy, FE-SEM, TEM, PXRD, ESI-mass spectrometry, Job's plot and rheology analysis. Nyquist plots suggested a large decrease in the resistance value from 11.3 kΩ to 4.2 kΩ for the solution obtained from the ligand deprotonated by LiOH (AL^2-) and Co(OAc)₂ containing the metallogel. The Nyquist plot and resistance of the metallogel have also been studied under the influence of temperature and ultrasound stimuli. The extensive rheological measurements provide information about the strength of the gel network and the highly reversible nature and thixotropic behaviour of the metallogel.

Bioinspired Superhydrophobic Thermochromic Films with Robust Healability

Thermochromic films with intriguing functionalities have great potential in soft actuators, heat storage devices, and interactive interface sensors. Inspired by the unique features of bird feathers (such as Nicobar pigeon, Anna hummingbird, mandarin duck, etc.), a superhydrophobic thermochromic film (STF) with robust healability is proposed for the first time through sandwiching an electric heater between a top thermochromic layer and a bottom poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) substrate. The STF exhibits fast and reversible color conversions of blue-pink-yellow under a low input power and has a superhydrophobic property with a contact angle of 155°. Furthermore, owing to the strong dynamic dipole-dipole interactions between the polar CF₃ groups of flexible PVDF-HFP chains, the STF possesses a robust healing capability of structure and conductivity. By means of the temperature difference generated by the objects contacting (finger, iron, and water) as a stimulus, the STFs achieve tactile imaging and writing record with advantages of transient display, automatic erasure, and excellent reusability. Additionally, the STF-based anti-counterfeiting security labels with superhydrophobicity and three-state color switching simultaneously realize facile distinguishment and difficult forgery. The findings conceivably stand out as a new methodology to fabricate functional thermochromic materials for innovative applications.

A Zr-cluster based thermostable, self-healing and adaptive metallogel with chromogenic properties responds to multiple stimuli with reversible radical interaction

A Zr-cluster based metallogel is synthesized via an unusual one-pot solvothermal method. The resulting metallogel is robust, adaptive, self-healing, highly thermostable and conductive. Moreover, the metallogel exhibits reversible stimuli-responsive properties. The gel could respond to at least four kinds of stimuli such as light, aliphatic amines, electricity and metals with color and fluorescence tunability. Importantly, the metallogel with electrochromic properties could be used as soft electrochromic devices for smart windows and electro display boards, and metalchromism provides a practical way for coating corrosion monitoring of metal materials.

Ultrasound-induced emission color and transmittance changes of organogel based on "trans-to-cis" isomerization

Herein, instant and precise control of fluorescent emission color and transmittance could be carried out by ultrasound-promoted gel-to-gel transition of naphthalimide derivatives containing CN unit. It is proved that ultrasound triggered an irreversible and efficient configuration transformation of N1 from "trans to cis" form in gel state, which is stabilized by intermolecular hydrogen bonding interaction and not observed in the solution state.