Organic Optoelectronic Diodes as Tactile Sensors for Soft-Touch Applications

'Molecular Beam Epitaxy' on Organic Semiconductor Single Crystals: Characterization of Well-Defined Molecular Interfaces by Synchrotron Radiation X-ray Diffraction Techniques

Epitaxial growth, often termed "epitaxy", is one of the most essential techniques underpinning semiconductor electronics, because crystallinities of the materials seriously dominate operation efficiencies of the electronic devices such as power gain/consumption, response speed, heat loss, and so on. In contrast to already well-established epitaxial growth methodologies for inorganic (covalent or ionic) semiconductors, studies on inter-molecular (van der Waals) epitaxy for organic semiconductors is still in the initial stage. In the present review paper, we briefly summarize recent works on the epitaxial inter-molecular junctions built on organic semiconductor single-crystal surfaces, particularly on single crystals of pentacene and rubrene. Experimental methodologies applicable for the determination of crystal structures of such organic single-crystal-based molecular junctions are also illustrated.

Highly Sensitive and Ultrafast Organic Phototransistor Based on Rubrene Single Crystals

Rubrene single crystals have received a lot of attention for their great potential in electronic and wearable nanoelectronics due to their high carrier mobility and excellent flexibility. While they exhibited remarkable electrical performances, their intrinsic potential as photon detectors has not been fully exploited. Here, we fabricate a sensitive and ultrafast organic phototransistor based on rubrene single crystals. The device covers the ultraviolet to visible range (275-532 nm), and the responsivity and detectivity can reach up to ∼4000 A W^-1 and 10¹¹ jones at 532 nm, respectively. Furthermore, the response times are highly gate-tunable down to sub-90 μs, and the cutoff frequency is ∼4 kHz, which is one of the fastest organic material-based phototransistors reported so far. Equally important is that the fabricated device exhibits stable light detection ability even after 8 months, indicating great long-term stability and excellent environmental robustness. The results suggest that the high-quality rubrene single crystal may be a promising material for future flexible optoelectronics with its intrinsic mechanical flexibility.

Energy-Level Manipulation in Novel Indacenodithiophene-Based Donor-Acceptor Polymers for Near-Infrared Organic Photodetectors

Organic photodetectors (OPDs) are promising candidates for next-generation digital imaging and wearable sensors due to their low cost, tuneable optoelectrical properties combined with high-level performance, and solution-processed fabrication techniques. However, OPD detection is often limited to shorter wavelengths, whereas photodetection in the near-infrared (NIR) region is increasingly being required for wearable electronics and medical device applications. NIR sensing suffers from low responsivity and high dark currents. A common approach to enhance NIR photon detection is lowering the optical band gap via donor-acceptor (D-A) molecular engineering. Herein, we present the synthesis of two novel indacenodithiophene (IDT)-based D-A conjugated polymers, namely, PDPPy-IT and PSNT-IT via palladium-catalyzed Stille coupling reactions. These novel polymers exhibit optical band gaps of 1.81 and 1.27 eV for PDPPy-IT and PSNT-IT, respectively, with highly desirable visible and NIR light detection through energy-level manipulation. Moreover, excellent materials' solubility and thin-film processability allow easy incorporation of these polymers as an active layer into OPDs for light detection. In the case of PSNT-IT devices, a photodetection up to 1000 nm is demonstrated with a peak sensitivity centered at 875 nm, whereas PDPPy-IT devices are efficient in detecting the visible spectrum with the highest sensitivity at 660 nm. Overall, both OPDs exhibit spectral responsivities up to 0.11 A W^-1 and dark currents in the nA cm^-2 range. With linear dynamic ranges exceeding 140 dB and fast response times recorded below 100 μs, the use of novel IDT-based polymers in OPDs shows great potential for wearable optoelectronics.

Optical Micro/Nanofiber-Enabled Compact Tactile Sensor for Hardness Discrimination

Optical micro/nanofibers (MNFs) can be applied for ultrasensitive tactile sensing with fast response and compact size, which are attractive for restoring tactile information in minimally invasive robotic surgery and tissue palpation. Herein, we present a compact tactile sensor (CTS) with a diameter of 1.5 mm enabled by an optical MNF. The CTS provides continuous readouts for high-fidelity transduction of touch and pressure stimuli into interpretable optical signals, which permit instantaneous sensing of contact and pressure with pressure-sensing sensitivity as high as 0.108 mN^-1 and a resolution of 0.031 mN. Working in pressing mode, the CTS can discriminate the difference in the hardness of two poly(dimethylsiloxane) (PDMS) slats (with shore A of 36 and 40) directly, a hardness resolving ability even beyond the human hands. Benefitting from the fast response feature, the CTS can also be operated in either scanning or tapping mode, making it feasible for hardness identification by analyzing the shape of the response curve. As a proof of concept, the hardness discrimination of a pork liver and an adductor muscle was experimentally demonstrated. Such MNF-enabled compact tactile sensors may pave the way for hardness sensing in tissue palpation, surgical robotics, and object identification.

Enhancement of air-stability, π-stacking ability, and charge transport properties of fluoroalkyl side chain engineered n-type naphthalene tetracarboxylic diimide compounds

In this study, the impact of fluoroalkyl side chain substitution on the air-stability, π-stacking ability, and charge transport properties of the versatile acceptor moiety naphthalene tetracarboxylic diimide (NDI) has been explored. A density functional theory (DFT) study has been carried out for a series of 24 compounds having different side chains (alkyl, fluoroalkyl) through the imide nitrogen position of NDI moiety. The fluoroalkyl side chain engineered NDI compounds have much deeper highest occupied molecular orbitals (HOMO) and lowest unoccupied molecular orbitals (LUMO) than those of their alkyl substituted compounds due to the electron withdrawing nature of fluoroalkyl groups. The higher electron affinity (EA > 2.8 eV) and low-lying LUMO levels (<−4.00 eV) for fluoroalkyl substituted NDIs reveal that they may exhibit better air-stability with superior n-type character. The computed optical absorption spectra (∼386 nm) for all the investigated NDIs using time-dependent DFT (TD-DFT) lie in the ultra-violet (UV) region of the solar spectrum. In addition, the low value of the LOLIPOP (Localized Orbital Locator Integrated Pi Over Plane) index for fluoroalkyl side chain comprising NDI compounds indicates better π–π stacking ability. This is also in good agreement for the predicted π–π stacking interaction obtained from a molecular electrostatic potential energy surface (ESP) study. The π–π stacking is thought to be of cofacial interaction for the fluoroalkyl substituted compounds and herringbone interaction for the alkyl substituted compounds. The calculated results shed light on why side chain engineering with fluoroalkyl groups can effectively lead to better air-stability, π-stacking ability and improved charge transport properties.

In this study, the impact of fluoroalkyl side chain substitution on the air-stability, π-stacking ability, and charge transport properties of the versatile acceptor moiety naphthalene tetracarboxylic diimide (NDI) has been explored.