D-π-A-Structured Porphyrins with Extended Auxiliary π-Spacers for Highly Efficient Dye-Sensitized Solar Cells

Far-red active unsymmetrical squaraine dyes containing N-arylated indoline donors for dye sensitized solar cells

Squaraine dyes possess sharp far-red active transition with high extinction coefficient and form aggregates on TiO2 surface. Aggregation of dyes on TiO2 has been considered as a detrimental factor for DSSC device performance, which can be controlled by appending alkyl groups to the dye structures. Hence by integrating alkylated (alkyl groups with both in-plane and out-of-plane) aryl group with indoline moiety to make it compatible with other electrolytes and for controlling the dye-aggregation, a series of squaraine acceptor-based dyes SQA4-6 have been designed and synthesized. SQA4-6 dyes showed absorption between 642 and 653 nm (λmax), photophysical and electrochemical studies indicated that the HOMO energy levels of this sets of dyes are well aligned with the potentials of I-/I 3 - and [Co(bpy)3]2+/3+ redox shuttles for better dye regeneration process. DSSC device efficiency of 3% has been achieved for SQA5 dye with iodolyte (I-/I 3 - ) electrolyte in the presence of 0.3 mM of chenodeoxycholic acid (CDCA). The IPCE profile of DSSC device fabricated with SQA4-6 dyes indicated the contribution of aggregated structures for the photocurrent generation.

Triple-Bond Vibrations: Emerging Applications in Energy and Biological Sciences

Triple bonds, such as that formed between two carbon atoms (i.e., C≡C) or that formed between one carbon atom and one nitrogen atom (i.e., C≡N), afford unique chemical bonding and hence vibrational characteristics. As such, they are not only frequently used to construct molecules with tailored chemical and/or physical properties but also employed as vibrational probes to provide site-specific chemical and/or physical information at the molecular level. Herein, we offer our perspective on the emerging applications of various triple-bond vibrations in energy and biological sciences with a focus on C≡C and C≡N triple bonds.

Efficient Solar Cells Based on Porphyrin and Concerted Companion Dyes Featuring Benzo 12-Crown-4 for Suppressing Charge Recombination and Enhancing Dye Loading

In recent years, various porphyrin dyes have been designed to develop efficient dye-sensitized solar cells (DSSCs). Based on our previously reported porphyrin dye XW43, which contains a phenothiazine donor with two diethylene glycol (DEG)-derived substituents, we herein report a porphyrin dye XW89 by introducing a benzo 12-crown-4 (BCE) unit onto the N atom of the phenothiazine donor. On this basis, XW90 and XW91 have been synthesized by replacing a DEG chain in XW89 with two DEG chains and a 12-crown-4 unit, respectively. For iodine electrolyte-based DSSCs, dyes XW89-XW91 exhibit VOC values of 765-779 mV, higher than that of XW43 (755 mV), which may be related to the strong capability of the BCE group in binding Li+ and thus suppressing the downward shift of the TiO2 conduction band and interfacial charge recombination. Moreover, the smaller size of 12-crown-4 than the DEG unit enables higher adsorption amounts of the dyes than XW43, contributing to an enhanced JSC value. Due to the presence of two BCE units, dye XW91 exhibits the highest dye loading amount and JSC of 1.86 × 10-7 mol cm-2 and 19.79 mA cm-2, respectively, affording a high PCE of 11.1%. To further enhance the light-harvesting ability, a concerted companion (CC) dye XW92 has been constructed by linking the two subdye units corresponding to the porphyrin dye XW91 and an organic dye. As a result, XW92 affords an enhanced JSC and efficiency. Further coadsorption of XW92 with chenodeoxycholic acid achieved the highest efficiency of 12.1%. This work provides an effective approach for fabricating efficient DSSCs sensitized by porphyrin and CC dyes based on the introduction of crown ether units with smaller sizes and stronger Li+ affinities.

Unraveling Structure-Performance Relationships in Porphyrin-Sensitized TiO2 Photocatalysts

Over the years, porphyrins have arisen as exceptional photosensitizers given their ability to act as chlorophyll-mimicking dyes, thus, transferring energy from the light-collecting areas to the reaction centers, as it happens in natural photosynthesis. For this reason, porphyrin-sensitized TiO2-based nanocomposites have been widely exploited in the field of photovoltaics and photocatalysis in order to overcome the well-known limitations of these semiconductors. However, even though both areas of application share some common working principles, the development of solar cells has led the way in what is referred to the continuous improvement of these architectures, particularly regarding the molecular design of these photosynthetic pigments. Yet, those innovations have not been efficiently translated to the field of dye-sensitized photocatalysis. This review aims at filling this gap by performing an in-depth exploration of the most recent advances in the understanding of the role played by the different structural motifs of porphyrins as sensitizers in light-driven TiO2-mediated catalysis. With this goal in mind, the chemical transformations, as well as the reaction conditions under which these dyes must operate, are taken in consideration. The conclusions drawn from this comprehensive analysis offer valuable hints for the implementation of novel porphyrin-TiO2 composites, which may pave the way toward the fabrication of more efficient photocatalysts.

Influence of the π-Bridge-Fused Ring and Acceptor Unit Extension in D-π-A-Structured Organic Dyes for Highly Efficient Dye-Sensitized Solar Cells

Three new D-π-A-structured organic dyes, coded as SGT-138, SGT-150, and SGT-151, with the expansion of π-conjugation in the π-bridge and acceptor parts have been developed to adjust HOMO/LUMO levels and to expand the light absorption range of organic dyes. Referring to the SGT-137 dye, the π-bridge group was extended from the 4-hexyl-4H-thieno[3,2-b]indole (TI) to the 9-hexyl-9H-thieno[2',3':4,5]thieno[3,2-b]indole (TII), and the acceptor group was extended from (E)-3-(4-(benzo[c][1,2,5]thiadiazol-4-yl)phenyl)-2-cyanoacrylic acid (BTCA) to (E)-3-(4-(benzo[c][1,2,5]thiadiazol-4-ylethynyl)phenyl)-2-cyanoacrylic acid (BTECA), where TII was introduced as a π-bridging unit for the first time. It was determined that both extensions are promising strategies to enhance the light-harvesting ability. They present several features, such as (i) efficiently intensifying the extinction coefficient and expanding the absorption bands; (ii) exhibiting enhanced intramolecular charge transfer in comparison with the SGT-137; and (iii) being favorable to photoelectric current generation of dye-sensitized solar cells (DSSCs) with cobalt electrolytes. In particular, the π-spacer extension from TI to TII was useful for modulating the HOMO energy levels, while the acceptor extension from BTCA to BTECA was useful for modulating the LUMO energy levels. These phenomena could be explained with the aid of density functional theory calculations. Finally, the DSSCs based on new SGT-dyes with an HC-A1 co-adsorbent presented good power conversion efficiencies as high as 11.23, 11.30, 11.05, and 10.80% for SGT-137, SGT-138, SGT-150, and SGT-151, respectively. Furthermore, it was determined that the use of the bulky co-adsorbent, HC-A1, can effectively suppress the structural relaxation of dyes in the excited state, thereby enhancing the charge injection rate of SGT-dyes. The observations in time-resolved photoluminescence were indeed consistent with the variation in the PCE, quantitatively.

Understanding High Fluorescence Quantum Yield and Simultaneous Large Stokes Shift in Phenyl Bridged Donor-π-Acceptor Dyads with Varied Bridge Lengths in Polar Solvents

Photophysical properties of electron donor-π-acceptor (D-π-A) dyads for a given pair of D and A highly depend on the π-bridge type and length and also on the solvent polarity. In this work, first-principles calculations with optimally tuned range-separated hybrids are implemented to explore and understand the optical absorption and emission properties of recently synthesized novel D-π-A dyads with 1,2-diphenylphenanthroimidazole (PPI) as D and 1,2,4-triazolopyridine (TP) as A with varied phenyl π-bridge lengths (denoted as PPI-P_n-TP, n = 0-2 considered here) in solvents of different dielectrics. All three D-π-A dyads display almost an unaltered low-lying optical peak position and a red-shifted emission with increasing solvent polarity, corroborating well with the reported experimental observations. The observed emission shift was attributed to the stabilization of an intramolecular charge-transfer (ICT) state by the polar solvent. Contrastingly, our calculations reveal no ICT; rather the shift is essentially originated from the substantial excited-state relaxation involving primarily rotation of the PPI phenyl ring directly linked to the π-bridge, leading to an almost planarized emissive state. Further, the greater frontier molecular orbital delocalization-driven high fluorescence rate together with increased structural rigidity of the emissive state rationalize the observed high fluorescence quantum yield. The present research findings not only are helpful to better understand the reported experimental observations but also show routes to molecularly design functional D-π-A molecules for advanced optoelectronic, sensing, and biomedical applications.

Spectral properties and photophysical processes of meso styryl substituent triphenylamine-porphyrin derivatives

This work reports the synthesis and spectral properties of meso-styryl substituted triphenylamine-porphyrin derivatives, mP-BLP, mPPC-BLP and their metal coordinated complexes. The photophysical processes were analyzed and related to the meso-groups and centre metal ions. The meso styryl substituent in mP-BLP and its complexes are able to extend the conjugation of porphyrin macrocycle to the styryl motif, increase light harvesting ability and accelerate intersystem crossing (ISC) process. A large dihedral angle between the meso-styryl group and porphyrin macrocycle would prohibit the delocalization of electrons between the two motifs and induce the occurrence of solvation decay process. Increasing the electron-withdrawing ability of meso-substituent via additional pyrimidine group could promote the photoinduced intramolecular electron transfer (PIET) process for mPPC-BLP. Moreover, the coordination of metal ions would significantly accelerate the photophysical processes of both mP-BLP and mPPC-BLP. Specially, the Mg[Formula: see text] is helpful to the ISC process whereas Zn[Formula: see text] is adverse to the ISC process, while Cu[Formula: see text] would boost the non-radiation process. Furthermore, Zn[Formula: see text] is able to promote the PIET process of mPPC-BLP, exhibiting the highest charge-separated tendency among these porphyrins. mPPC-ZnBLP-based dye-sensitized solar cell (DSSC) devices show the highest power conversion efficiency (PCE). The photovoltaic performance of DSSC devices reveals the significancy of the photoinduced charge-separated tendency for the design of porphyrin sensitizers.

Photovoltaic performance and power conversion efficiency prediction of double fence porphyrins

To explore high efficiency dye-sensitized solar cells (DSSCs), two experimentally derived (single fence and double fence porphyrins) and two theoretically designed zinc porphyrin molecules with D-D-π-A-A configurations were studied. Density functional theory and time-dependent density functional theory were employed to simulate these two experimental dyes and dye@TiO₂ systems to understand why the double fence porphyrin molecule exhibits better photovoltaic performance than the single fence porphyrin molecule. For the short-circuit current (J_SC), the various parameters that affected the experimental magnitude of J_SC were analyzed from different aspects of absorption, charge transfer and chemical parameters as well as an electron injection process. The almost equal open-circuit voltages (V_OC) in the experiment were predicted by theoretical V_OC calculations. Our model predicted power conversion efficiencies (PCEs) of 1.993% and 10.866% for the single and double fence molecules, respectively, which are in accordance with the experimental values of 3.48% and 10.69%, respectively. In addition, one designed two new molecules based on the double fence porphyrin molecule with a 2-methyl-2H-benzo[d][1,2,3]triazole (BTA) unit bearing one fluorine and two fluorine atoms as the guest acceptor, respectively. Compared to the original molecules, the engineered molecules significantly improved the photovoltaic parameters, J_SC and V_OC, thereby causing excellent PCEs. The most outstanding designed molecule reached a PCE of 12.155%, and is considered a candidate dye for high-efficiency DSSC. This study provides insights into the photoelectric properties of single and double fence porphyrins. It also demonstrated that the strong electron-withdrawing ability of fluorine atoms would enhance the photovoltaic performance and provide a guideline for the further design of double fence porphyrins.

Starburst-Shaped D-π-A Chromophores Possessing a Hexaethynylbenzene Core for Dye-Sensitized Solar Cells

Two starburst-shaped organic chromophores, incorporating a hexaethynylbenzene core modified by five donor branches (D-branches) of (p-dioctylaminostyryl)benzene and one acceptor/anchoring branch (A-branch) of either carboxylic acid-terminated phenylethynylbenzene (SB-07) or cyanoacrylic acid-terminated diketopyrrolopyrrole (DPP)-thiophene (SB-08), were synthesized and applied to dye-sensitized solar cells (DSSCs). In these chromophores, the common donor moiety, five (p-dioctylaminostyryl)phenyl groups, exhibits excellent optical absorption in the visible region (molar absorption coefficient ε > 10⁵ M^-1 cm^-1 below 500 nm). The A-branch of SB-07 does not possess strong electron-accepting properties; however, the A-branch of SB-08, the DPP-thiophene moiety, serves as a strong electron acceptor site. Furthermore, the intramolecular charge-transfer (ICT) transition between the thiophene and DPP moieties extends the optical absorption range to the near-infrared region (∼800 nm). Optimized DSSC devices using SB-08 with coadsorption of chenodeoxycholic acid, in conjunction with iodide/triiodide-based electrolytes, exhibited incident photon-to-current conversion efficiency (IPCE) exceeding 70% in the 370-700 nm range and over 20% even at 800 nm, with a short-circuit photocurrent density (J_sc) of 19.3 mA cm^-2 and a power conversion efficiency (PCE) of 6.4% under AM 1.5G illumination (100 mW cm^-2). These results are considerably better than those of SB-07 (J_sc = 7.0 mA cm^-2, PCE = 3.3%). The starburst-shaped architecture presented here can be used as a novel structural motif for metal-free organic sensitizers because it enables flexible modification of the multiple D-branches that enhance light-harvesting ability and the A-branch that serves as an excited electron transport pathway.

Novel photosensitizer for dye-sensitized solar cell based on ionic liquid–doped blend polymer electrolyte

The existing energy situation demands not only the huge energy in a short time but also clean energy. In this regard, an integrated photo-supercapacitor device has been fabricated in which photoelectric conversion and energy storage are achieved simultaneously. A novel carbazole-based dye is synthesized and characterized for photosensitizer. The silver-doped titanium dioxide (Ag-TiO2) is synthesized, and it is used as photoanode material. Different concentrations of tetrabutylammonium iodide (TBAI)-doped polyvinyl alcohol–polyvinylpyrrolidone (PVA-PVP) blend polymer electrolytes are prepared, and their conductivity and dielectric properties were studied. Reduced graphene oxide (r-GO) is synthesized by a one-pot synthesis method and confirmed using Raman spectroscopy for counter electrode material in dye-sensitized solar cell (DSSC) and supercapacitor electrodes. The DSSC having 4% Ag-TiO2–based photoanode showed the highest efficiency of 1.06% (among r-GO counter electrodes) and 2.37% (among platinum counter electrodes). The supercapacitor before integration and after integration exhibits specific capacitance of 1.72 Fg−1 and 1.327 Fg−1, respectively.

Fine-Tuning by Triple Bond of Carbazole Derivative Dyes to Obtain High Efficiency for Dye-Sensitized Solar Cells with Copper Electrolyte

Three novel dyes consisting of a 5,8,15-tris(2-ethylhexyl)-8,15-dihydro-5H-benzo[1,2-b:3,4-b':6,5-b″]tricarbazole (BTC) electron-donating group and a 4,7-bis(4-hexylthiophen-2-yl)benzo[c][1,2,5]thiadiazole (BTBT) π-bridge with an anchoring group of phenyl carboxyl acid were synthesized and applied in dye-sensitized solar cells (DSCs).The AJ202 did not contain any triple bonds, the AJ201's ethynyl group was inserted between the BTC and BTBT units, and the AJ206's ethynyl group was introduced between the BTBT moiety and the anchor group. The inclusion and position of the ethynyl linkage in the sensitizer molecules significantly altered the electrochemical properties of these dyes, which can fine-tune the energy levels of the dyes. The best performing devices contained AJ206 as a sensitizer and a Cu(I/II) redox couple, which resulted in a power conversion efficiency (PCE) up to 10.8% under the standard AM 1.5 G illumination, which obtained PCEs higher than those from the devices that contained AJ201 (9.2%) and AJ202 (9.7%) under the same conditions. The highest occupied molecular orbital and lowest unoccupied molecular orbital levels of the sensitizers were tuned to be well-suited for the Cu(I/II) redox potential and the Fermi level of TiO₂. The innovative synthesis of a tricarbazole-based donor moiety in a sensitizer used in combination with a Cu(I/II) redox couple has resulted in relatively high PCEs.

Cause, Regulation and Utilization of Dye Aggregation in Dye-Sensitized Solar Cells

As an important member of third generation solar cell, dye-sensitized solar cells (DSSCs) have the advantages of being low cost, having an easy fabrication process, utilizing rich raw materials and a high-power conversion efficiency (PCE), prompting nearly three decades as a research hotspot. Recently, increasing the photoelectric conversion efficiency of DSSCs has proven troublesome. Sensitizers, as the most important part, are no longer limited to molecular engineering, and the regulation of dye aggregation has become a widely held concern, especially in liquid DSSCs. This review first presents the operational mechanism of liquid and solid-state dye-sensitized solar cells, including the influencing factors of various parameters on device efficiency. Secondly, the mechanism of dye aggregation was explained by molecular exciton theory, and the influence of various factors on dye aggregation was summarized. We focused on a review of several methods for regulating dye aggregation in liquid and solid-state dye-sensitized solar cells, and the advantages and disadvantages of these methods were analyzed. In addition, the important application of quantum computational chemistry in the study of dye aggregation was introduced. Finally, an outlook was proposed that utilizing the advantages of dye aggregation by combining molecular engineering with dye aggregation regulation is a research direction to improve the performance of liquid DSSCs in the future. For solid-state dye-sensitized solar cells (ssDSSCs), the effects of solid electrolytes also need to be taken into account.

Effect of fluorine substituents on benzothiadiazole-based D-π-A'-π-A photosensitizers for dye-sensitized solar cells

Two D-π-A'-π-A organic dyes with triazatruxene (TAT) as the electron donor, thiophene as the π-spacer, benzoic acid as the anchor group, and benzothiadiazole (BT) or difluorobenzo[c][1,2,5]thiadiazole (DFBT) as the additional acceptor, namely LS101 and LS102, respectively, were applied to dye-sensitized solar cells (DSSCs). As fluorine substituents are usually strong electron-withdrawing groups, introducing two fluorine atoms into BT was expected to strengthen the electron-withdrawing ability of the auxiliary acceptor, resulting in DSSCs with a broader light capture region and further improved power conversion efficiency (PCE). Fluorine is the smallest electron-withdrawing group with an induction effect, but can also act as an electron-donating group owing to its conjugation effect. When the conjugation effect is dominant, the electron-withdrawing ability of additional acceptor DFBT decreases instead. Accordingly, the band gap of LS102 was broadened and the UV-vis absorption spectrum was blue-shifted. In the end, DSSCs based on LS101 achieved a champion PCE of 10.2% (J sc = 15.1 mA cm-2, V oc = 966 mV, FF = 70.1%) while that based on LS102 gave a PCE of only 8.6% (J sc = 13.4 mA cm-2, V oc = 934 mV, FF = 69.1%) under standard AM 1.5G solar irradiation (100 mW cm-2) with Co2+/Co3+ as the electrolyte.