Micro- and Nanohemispherical 3D Imprints Modulate the Osteogenic Differentiation and Mineralization Tendency of Bone Cells

Nano implant surface triggers autophagy through membrane curvature distortion to regulate the osteogenic differentiation

Anodized titania nanotubes have been considered as an effective coating for bone implants due to their ability to induce osteogenesis, whereas the osteogenic mechanism is not fully understood. Our previous study has revealed the potential role of autophagy in osteogenic regulation of nanotubular surface, whereas how the autophagy is activated remains unknown. In this study, we focused on the cell membrane curvature-sensing protein Bif-1 and its effect on the regulation of autophagy. Both autophagosomes formation and autophagic flux were enhanced on the nanotubular surface, as indicated by LC3-II accumulation and p62 degradation. In the meanwhile, the Bif-1 was significantly upregulated, which contributed to autophagy activation and osteogenic differentiation through Beclin-1/PIK3C3 signaling pathway. In conclusion, these findings have bridged the gap between extracellular physical nanotopography and intracellular autophagy activation, which may provide a deeper insight into the signaling transition from mechanical to biological across the cell membrane.

Designer Micro-/Nanocrumpled MXene Multilayer Coatings Accelerate Osteogenesis and Regulate Macrophage Polarization

Effective tissue regeneration and immune responses are essential for the success of biomaterial implantation. Although the interaction between synthetic materials and biological systems is well-recognized, the role of surface topographical cues in regulating the local osteoimmune microenvironment─specifically, their impact on host tissue and immune cells, and their dynamic interactions─remains underexplored. This study addresses this gap by investigating the impact of surface topography on osteogenesis and immunomodulation. We fabricated MXene/hydroxyapatite (HAP)-coated surfaces with controlled 2.5D nano-, submicro-, and microscale topographical patterns using our custom bottom-up patterning method. These engineered surfaces were employed to assess the behavior of osteoblast precursor cells and macrophage polarization. Our results demonstrate that MXene/HAP-coated surfaces with microscale crumpled topography significantly influence osteogenic activity and macrophage polarization: these surfaces notably enhanced osteoblast precursor cell spreading, proliferation, and differentiation and facilitated a shift in macrophages toward an anti-inflammatory, prohealing M2 phenotype. The observed cell responses indicate that the physical cues from the crumpled topographies, combined with the chemical cues from the MXene/HAP coatings, synergistically create a favorable osteoimmune microenvironment. This study presents the first evidence of employing MXene/HAP-multilayer coated surfaces with finely crumpled topography to concurrently facilitate osteogenesis and immunomodulation for improved implant-to-tissue integration. The tunable topographic patterns of these coatings coupled with a facile and scalable fabrication process make them widely applicable for various biomedical purposes. Our results highlight the potential of these multilayer coatings with controlled topography to improve the in vivo performance and fate of implants by modulating the host response at the material interface.

Improving Biological Functions of Three-Dimensional Printed Ti2448 Scaffolds by Decoration with Polydopamine and Extracellular Matrices

Extracellular matrices (ECMs) provide important cues for cell proliferation and differentiation in the complex environment, which show a significant influence on cell functions. Herein, cell-derived ECMs were deposited on the polydopamine (PDA)-decorated porous Ti-24Nb-4Zr-8Sn (Ti2448) scaffolds fabricated by the electron beam melting method in order to improve biological functions. The influence of PDA-ECM coatings on cell functions was further investigated. The results demonstrated that the PDA-ECM coating facilitated adhesion, proliferation, and migration of MC3T3-E1 cells on Ti2448 scaffolds. Moreover, Ti2448-PDA-ECM scaffolds promoted osteogenesis differentiation of cells indicated by greater alkaline phosphatase activity and further mineralization, compared to the plain Ti2448 group. Meanwhile, Ti2448-PDA-ECM scaffolds enhanced bone growth after implantation for one month in rabbit femoral bone defects. Our findings suggest that the bioinspired PDA-ECM coating can be implemented on the porous Ti2448 scaffolds, which significantly improve the biological functions of orthopedic implants.

Disrupted Surfaces of Porous Membranes Reduce Nuclear YAP Localization and Enhance Adipogenesis through Morphological Changes

The disrupted surface of porous membranes, commonly used in tissue-chip and cellular coculture systems, is known to weaken cell-substrate interactions. Here, we investigated whether disrupted surfaces of membranes with micron and submicron scale pores affect yes-associated protein (YAP) localization and differentiation of adipose-derived stem cells. We found that these substrates reduce YAP nuclear localization through decreased cell spreading, consistent with reduced cell-substrate interactions, and in turn enhance adipogenesis while decreasing osteogenesis.

Dynamics of Endothelial Engagement and Filopodia Formation in Complex 3D Microscaffolds

The understanding of endothelium–extracellular matrix interactions during the initiation of new blood vessels is of great medical importance; however, the mechanobiological principles governing endothelial protrusive behaviours in 3D microtopographies remain imperfectly understood. In blood capillaries submitted to angiogenic factors (such as vascular endothelial growth factor, VEGF), endothelial cells can transiently transdifferentiate in filopodia-rich cells, named tip cells, from which angiogenesis processes are locally initiated. This protrusive state based on filopodia dynamics contrasts with the lamellipodia-based endothelial cell migration on 2D substrates. Using two-photon polymerization, we generated 3D microstructures triggering endothelial phenotypes evocative of tip cell behaviour. Hexagonal lattices on pillars (“open”), but not “closed” hexagonal lattices, induced engagement from the endothelial monolayer with the generation of numerous filopodia. The development of image analysis tools for filopodia tracking allowed to probe the influence of the microtopography (pore size, regular vs. elongated structures, role of the pillars) on orientations, engagement and filopodia dynamics, and to identify MLCK (myosin light-chain kinase) as a key player for filopodia-based protrusive mode. Importantly, these events occurred independently of VEGF treatment, suggesting that the observed phenotype was induced through microtopography. These microstructures are proposed as a model research tool for understanding endothelial cell behaviour in 3D fibrillary networks.

Repair calvarial defect of osteoporotic rats by berberine functionalized porous calcium phosphate scaffold

In this article, we propose a simple scheme of using berberine (BBR) to modify porous calcium phosphate ceramics (named PCPC). These BBR molecules regulate the crystallization of hydroxyapatite nanorods on PCPC. We found that these nanorods and the adsorbed BBR changed the interface micro-environment of PCPC by SEM images. The microenvironment of PCPC surface is essential for promoting BMSCs’ proliferation and differentiation. These results demonstrated that PCPC/BBR markedly improved the bone regeneration of osteoporosis rats. Moreover, PCPC/BBR had significantly increased the expression levels of ALP, osteocalcin and bone morphogenetic protein2 and RUNX2 in BMSCs originated from osteoporosis rats.

Conductive chitosan/polyaniline hydrogel with cell-imprinted topography as a potential substrate for neural priming of adipose derived stem cells

Biophysical characteristics of engineered scaffolds such as topography and electroconductivity have shown potentially beneficial effects on stem cell morphology, proliferation, and differentiation toward neural cells. In this study, we fabricated a conductive hydrogel made from chitosan (CS) and polyaniline (PANI) with induced PC12 cell surface topography using a cell imprinting technique to provide both topographical properties and conductivity in a platform. The engineered hydrogel's potential for neural priming of rat adipose-derived stem cells (rADSCs) was determined in vitro. The biomechanical analysis revealed that the electrical conductivity, stiffness, and hydrophobicity of flat (F) and cell-imprinted (CI) substrates increased with increased PANI content in the CS/PANI scaffold. The conductive substrates exhibited a lower degradation rate compared to non-conductive substrates. According to data obtained from F-actin staining and AFM micrographs, both CI(CS) and CI(CS-PANI) substrates induced the morphology of rADSCs from their irregular shape (on flat substrates) into the elongated and bipolar shape of the neuronal-like PC12 cells. Immunostaining analysis revealed that both CI(CS) and CI (CS-PANI) significantly upregulated the expression of GFAP and MAP2, two neural precursor-specific genes, in rADSCs compared with flat substrates. Although the results reveal that both cell-imprinted topography and electrical conductivity affect the neural lineage differentiation, some data demonstrate that the topography effects of the cell-imprinted surface have a more critical role than electrical conductivity on neural priming of ADSCs. The current study provides new insight into the engineering of scaffolds for nerve tissue engineering.

Designing topographically textured microparticles for induction and modulation of osteogenesis in mesenchymal stem cell engineering

Mesenchymal stem cells are the focus of intense research in bone development and regeneration. The potential of microparticles as modulating moieties of osteogenic response by utilizing their architectural features is demonstrated herein. Topographically textured microparticles of varying microscale features are produced by exploiting phase-separation of a readily soluble sacrificial component from polylactic acid. The influence of varying topographical features on primary human mesenchymal stem cell attachment, proliferation and markers of osteogenesis is investigated. In the absence of osteoinductive supplements, cells cultured on textured microparticles exhibit notably increased expression of osteogenic markers relative to conventional smooth microparticles. They also exhibit varying morphological, attachment and proliferation responses. Significantly altered gene expression and metabolic profiles are observed, with varying histological characteristics in vivo. This study highlights how tailoring topographical design offers cell-instructive 3D microenvironments which allow manipulation of stem cell fate by eliciting the desired downstream response without use of exogenous osteoinductive factors.

Preparation and biological evaluations of a collagen-like hierarchical Ti surface with superior osteogenic capabilities

The construction of multiscale Ti surfaces of high osteogenic ability has always attracted significant attention in the fields of oral implantology and implantable biomaterials. However, to date, the absence of a solid understanding of the correlation between the multiscale surface structure and the biological properties is the main obstacle in the development of these multiscale implants. In this study, a series of novel multiscale Ti surfaces were prepared via a three-step subtractive method. Moreover, based on the grayscale analysis of SEM images, we developed multiscale surface topography analysis methods. The typical topography characteristics at each scale of a multiscale complex surface can be analyzed according to the corresponding magnified SEM images. Thus, the evolution rule of the surface topography from a simple surface to multiscale complex surfaces can be mathematically described. Based on this, the correlation between multiscale surface structures and the corresponding biological properties was established. For the multiscale surface of superior osteogenic capacity, strict inherent regularity was found among the structures at multiple scales (i.e., multiscale order), that is, there was a balance between the construction of the 3D collagen-like network nanostructure and the preservation of the typical topographical features of the pre-existing macro- and micro-structures of the classic micro-roughened surface. Moreover, it was further found that the multiscale-ordered hierarchical Ti surface structure could modulate ROS production and enhance macrophage M2 polarization to create an osteogenesis-favorable immuno-inflammatory microenvironment and synergistically exhibit superior biological capability. Consequently, an optimized collagen-like hierarchical surface with superior osteogenic abilities was achieved.