Porous ZnO Ultrathin Nanosheets with High Specific Surface Areas and Abundant Oxygen Vacancies for Acetylacetone Gas Sensing

Organic-Hydrochloride-Modified ZnO Electron Transport Layer for Efficient Defect Passivation and Stress Release in Rigid and Flexible all Inorganic Perovskite Solar Cells

All inorganic CsPbI2Br perovskite (AIP) has attracted great attention due to its excellent resistance against thermal stress as well as the remarkable capability to deliver high-voltage output. However, CsPbI2Br perovskite solar cells (PeSCs) still encounter critical challenges in attaining both high efficiency and mechanical stability for commercial applications. In this work, formamidine disulfide dihydrochloride (FADD) modified ZnO electron transport layer (ETL) has been developed for fabricating inverted devices on either rigid or flexible substrate. It is found that the FADD modification leads to efficient defects passivation, thereby significantly reducing charge recombination at the AIP/ETL interface. As a result, rigid PeSCs (r-PeSCs) deliver an enhanced efficiency of 16.05% and improved long-term thermal stability. Moreover, the introduced FADD can regulate the Young's modulus (or Derjaguin-Muller-Toporov (DMT) modilus) of ZnO ETL and dissipate stress concentration at the AIP/ETL interface, effectively restraining the crack generation and improving the mechanical stability of PeSCs. The flexible PeSCs (f-PeSCs) exhibit one of the best performances so far reported with excellent stability against 6000 bending cycles at a curvature radius of 5 mm. This work thus provides an effective strategy to simultaneously improve the photovoltaic performance and mechanical stability.

Surface modification of Co3O4 nanosheets through Cd-doping for enhanced CO sensing performance

The detection of hazardous CO gas is an important research content in the domain of the Internet of Things (IoT). Herein, we introduced a facile metal-organic frameworks (MOFs)-templated strategy to synthesize Cd-doped Co3O4 nanosheets (Cd-Co3O4 NSs) aimed at boosting the CO-sensing performance. The synthesized Cd-Co3O4 NSs feature a multihole nanomeshes structure and a large specific surface area (106.579 m2·g-1), which endows the sensing materials with favorable gas diffusion and interaction ability. Furthermore, compared with unadulterated Co3O4, the 2 mol % Cd-doped Co3O4 (2% Cd-Co3O4) sensor exhibits enhanced sensitivity (244%) to 100 ppm CO at 200 °C and a comparatively low experimental limit of detection (0.5 ppm/experimental value). The 2% Cd-Co3O4 NSs show good selectivity, reproducibility, and long-term stability. The improved CO sensitivity signal is probably owing to the stable nanomeshes construction, high surface area, and rich oxygen vacancies caused by cadmium doping. This study presents a facile avenue to promote the sensing performance of p-type metal oxide semiconductors by enhancing the surface activity of Co3O4 combined with morphology control and component regulation.

Facile Formation of Sulfurized Nanorod-Like ZnO/Zn(OH)2 and Hierarchical Flower-Like γ-Zn(OH)2 /ϵ-Zn(OH)2 from a Green Synthesis and Application as Luminescent Solar Concentrator

This research endeavors to overcome the significant challenge of developing materials that simultaneously possess photostability and photosensitivity to UV-visible irradiation. Sulfurized nanorod (NR)-like ZnO/Zn(OH)2 and hierarchical flower-like γ-Zn(OH)2 /ϵ-Zn(OH)2 were identified from XRD diffraction patterns and Raman vibrational modes. The sulfurized material, observed by FEG-SEM and TEM, showed diameters ranging from 10 and 40 nm and lengths exceeding 200 nm. The S2- ions intercalated Zn2+ , modulating NRs to dumbbell-like microrods. SAED and HRTEM illustrated the atomic structure in (101) crystal plane. Its direct band gap of 3.0 eV was attributed to the oxygen vacancies, which also contribute to the deep-level emissions at 422 and 485 nm. BET indicated specific surface area of 4.4 m2  g-1 and pore size as mesoporosity, which are higher compared to the non-sulfurized analogue. These findings were consistent with the observed photocurrent, photostability and photoluminescence (PL), further supporting the suitability of sulfurized NR-like ZnO/Zn(OH)2 as a promising candidate for Luminescent solar concentrators (LSC)-photovoltaic (PV) system.

2D Zinc Oxide - Synthesis, Methodologies, Reaction Mechanism, and Applications

Zinc oxide (ZnO) is a thermally stable n-type semiconducting material. ZnO 2D nanosheets have mainly gained substantial attention due to their unique properties, such as direct bandgap and strong excitonic binding energy at room temperature. These are widely utilized in piezotronics, energy storage, photodetectors, light-emitting diodes, solar cells, gas sensors, and photocatalysis. Notably, the chemical properties and performances of ZnO nanosheets largely depend on the nano-structuring that can be regulated and controlled through modulating synthetic strategies. Two synthetic approaches, top-down and bottom-up, are mainly employed for preparing ZnO 2D nanomaterials. However, owing to better results in producing defect-free nanostructures, homogenous chemical composition, etc., the bottom-up approach is extensively used compared to the top-down method for preparing ZnO 2D nanosheets. This review presents a comprehensive study on designing and developing 2D ZnO nanomaterials, followed by accenting its potential applications. To begin with, various synthetic strategies and attributes of ZnO 2D nanosheets are discussed, followed by focusing on methodologies and reaction mechanisms. Then, their deliberation toward batteries, supercapacitors, electronics/optoelectronics, photocatalysis, sensing, and piezoelectronic platforms are further discussed. Finally, the challenges and future opportunities are featured based on its current development.

Current Trends in Nanomaterials for Metal Oxide-Based Conductometric Gas Sensors: Advantages and Limitations-Part 2: Porous 2D Nanomaterials

This article discusses the features of the synthesis and application of porous two-dimensional nanomaterials in developing conductometric gas sensors based on metal oxides. It is concluded that using porous 2D nanomaterials and 3D structures based on them is a promising approach to improving the parameters of gas sensors, such as sensitivity and the rate of response. The limitations that may arise when using 2D structures in gas sensors intended for the sensor market are considered.

Active-ion-gated room temperature acetone gas sensing of ZnO nanowires array

Reducing the high operation temperature of gas sensor to room temperature (RT) have attracted intense interests for its distinct preponderances, including energy-saving and super stability, which presents great prospects in commercial application. The exciting strategies for RT gas sensing, such as unique materials with activated surface or light activation, do not directly modulate the active ions for gas sensing, limiting the RT gas sensing performances. Here, an active-ion-gated strategy has been proposed for RT gas sensing with high performance and low power consumption, in which gas ions in triboelectric plasma are introduced into metal oxide semiconductor (MOS) film to act as both floating gate and active sensing ions. The active-ion-gated ZnO nanowires (NWs) array shows a sensitivity of 38.3% to 10 ppm acetone gas at RT, and the maximum power consumption is only 4.5 mW. At the same time, the gas sensor exhibits excellent selectivity to acetone. More importantly, the response (recovery) time of this sensor is as low as 11 s (25 s). It is found that OH-(H2O)4 ions in plasma are the key for realizing RT gas sensing ability, and an accompanied resistive switch is also observed. It is considered that the electron transfer between OH-(H2O)4 and ZnO NWs will forms a hydroxyl-like intermediate state (OH*) on the top of Zn2+, leading to the band bending of ZnO and activating the reactive O2 - ions on the oxygen vacancies. The active-ion-gated strategy proposed here present a novel exploration to achieving RT gas sensing performance of MOS by activating sensing properties at the scale of ions or atoms.

Dimensional Optimization for ZnO-Based Mechano-ATRP with Extraordinary Activity

Various piezoelectric nanomaterials were utilized in ultrasound-mediated atom transfer radical polymerization (ATRP), owing to their outstanding piezoelectric effect. However, the relationship between the morphology of those piezocatalysts and polymerization has not been clearly established. Herein, we employed different piezoelectric zinc oxide (ZnO) nanomaterials to achieve novel mechano-induced ATRP (mechano-ATRP). Based on the synergistic effect of piezoelectric properties and specific surface area, the catalytic activity of 1D ZnO nanorods (1D-ZnO NRs) with increased aspect ratio outperformed that of 0D ZnO nanoparticles (0D-ZnO NPs). Compared to the conventional ATRP system, this system exhibited extraordinary activity toward the less activated monomer acrylonitrile (67% conversion after 6 h), with a narrow molecular weight distribution (polydispersity index ∼ 1.19). Furthermore, implications of ZnO loading, copper salt amount, degree of polymerization, monomer, and solvent were also studied for the highly efficient mechano-ATRP.

Ag-Modified Porous Perovskite-Type LaFeO3 for Efficient Ethanol Detection

Perovskite (ABO₃) nanosheets with a high carrier mobility have been regarded as the best candidates for gas-sensitive materials arising from their exceptional crystal structure and physical–chemical properties that often exhibit good gas reactivity and stability. Herein, Ag in situ modified porous LaFeO₃ nanosheets were synthesized by the simple and efficient graphene oxide (GO)-assisted co-precipitation method which was used for sensitive and selective ethanol detection. The Ag modification ratio was studied, and the best performance was obtained with 5% Ag modification. The Ag/LaFeO₃ nanomaterials with high surface areas achieved a sensing response value (R_g/R_a) of 20.9 to 20 ppm ethanol at 180 °C with relatively fast response/recovery times (26/27 s). In addition, they showed significantly high selectivity for ethanol but only a slight response to other interfering gases. The enhanced gas-sensing performance was attributed to the combination of well-designed porous nanomaterials with noble metal sensitization. The new approach is provided for this strategy for the potential application of more P-type ABO₃ perovskite-based gas-sensitive devices.

Facile construction of bowknot-like CuO architectures for improved xylene gas sensing properties

The accurate and rapid monitoring of xylene gas is highly desired for human health and environmental protection. Herein, the bowknot-like CuO architectures have been synthesized through a facile room temperature...

Size-Controlled Au Nanoparticles Incorporating Mesoporous ZnO for Sensitive Ethanol Sensing

Zinc oxide (ZnO) as a commonly used semiconductor material has aroused extensive research attention in various fields, such as field-effect transistors, solar cells, luminescent devices, and sensors, because of its excellent light-electrical features and large exciton bonding energy. Herein, ultrasmall Au nanoparticles with tunable size decorated mesoporous ZnO nanospheres were synthesized via facile formaldehyde-assisted metal-ligand cross-linking strategy, where these active Au species could be transferred into Au nanoparticles in the frameworks by various reduction strategies. Typically, mesoporous ZnO-Au with a photoreduction technique showed superior ethanol sensing performance (ca. 159 for 50 ppm at 200 °C) because of its high surface area, dual-mesoporous structure, and interface effect (electron effect, surface catalytic/adsorption). Moreover, the mesoporous ZnO-Au composites by photoreduction show much better performance than those via H2 reduction and NaBH4 reduction, which is ascribed to the providential size of Au nanoparticles (ca. 6.6 nm) and abundant oxygen defects in the composites. In particular, the selectivity and sensitivity of mesoporous ZnO-Au far exceeds those of materials loaded with other noble metals (Pt, Pd, and Ag). The sensing mechanism of mesoporous ZnO-Au for ethanol is attributed to classical surface adsorption/catalytic reaction, where strong sensitization effect (electron and chemical) and the spillover effect of Au nanoparticles in the catalytic reaction cause superior ethanol sensing performances. In situ FTIR and GC-MS measurement revealed that the catalytic oxidation of ethanol follows the process of dehydrogenation and deep oxidation, that is, dehydrogenation to acetaldehyde, and then further oxidation to carbon dioxide and water.

2D-2D ZnO/N doped g-C3N4 composite photocatalyst for antibiotics degradation under visible light

ZnO and g-C₃N₄ provide excellent photocatalytic properties for degradation of antibiotics in pharmaceutical wastewater. In this work, 2D–2D ZnO/N doped g-C₃N₄ (NCN) composite photocatalysts were prepared for degradation of tetracycline (TC), ciprofloxacin (CIP) and ofloxacin (OFLX). The addition of ZnO resulted in higher separation efficiency and lower recombination rate of photogenerated charge under visible light. The composite photocatalyst showed better degradation performance compared to ZnO or NCN alone. The TC degradation reached 81.3% in 15 minutes by applying the prepared 20% ZnO/NCN composite photocatalyst, showing great competitiveness among literature reported g-C₃N₄ based photocatalysts. After 30 minutes, the degradation rate of TC, CIP and OFLX reached 82.4%, 64.4% and 78.2%, respectively. The TC degradation constant of the composite photocatalyst was 2.7 times and 6.4 times higher than NCN and CN, respectively. Radical trapping experiments indicated that ·O₂⁻ was the dominant active substance. The transference of excited electrons from the conduction band (CB) of NCN to ZnO enhanced the separation of photogenerated electron–hole pairs and simultaneously suppressed their recombination. This study provides a possibility for the design of high-performance photocatalysts for antibiotics degradation in wastewater.

2D–2D ZnO/N doped g-C₃N₄ (NCN) composite photocatalysts were prepared for degradation of antibiotics with high efficiency.

Alkaline Co(OH)2-Decorated 2D Monolayer Titanic Acid Nanosheets for Enhanced Photocatalytic Syngas Production from CO2

The difficulty of adsorption and activation of CO₂ at the catalytic site and rapid recombination of photogenerated charge carriers severely restrict the CO₂ conversion efficiency. Here, we fabricate a novel alkaline Co(OH)₂-decorated ultrathin 2D titanic acid nanosheet (H₂Ti₆O₁₃) catalyst, which rationally couples the structural and functional merits of ultrathin 2D supports with catalytically active Co species. Alkaline Co(OH)₂ beneficially binds and activates CO₂ molecules, while monolayer H₂Ti₆O₁₃ acts as an electron relay that bridges a photosensitizer with Co(OH)₂ catalytic sites. As such, photoexcited charges can be efficiently channeled from light absorbers to activated CO₂ molecules through the ultrathin hybrid Co(OH)₂/H₂Ti₆O₁₃ composite, thereby producing syngas (CO/H₂ mixture) from photoreduction of CO₂. High evolution rates of 56.5 μmol h^-1 for CO and 59.3 μmol h^-1 for H₂ are achieved over optimal Co(OH)₂/H₂Ti₆O₁₃ by visible light illumination. In addition, the CO/H₂ ratio can be facilely tuned from 1:1 to 1:2.4 by changing the Co(OH)₂ content, thus presenting a feasible approach to controllably synthesize different H₂/CO mixtures for target applications.

Innovative approach for the production of carbon nanotubes (CNTs) and carbon nanosheets through highly efficient photocatalytic water splitting into hydrogen using metal organic framework (MOF)-nano TiO2 matrices as novel catalysts

Novel photocatalyst for water conversion into pure hydrogen and carbon nanotubes as new advances in the process of water splitting.

The effect of n–π* electronic transitions on the N2 photofixation ability of carbon self-doped honeycomb-like g-C3N4 prepared via microwave treatment

Light harvesting is an important part of the photocatalysis process.