Realization of Red Iridium-Based Ionic Transition Metal Complex Light-Emitting Electrochemical Cells (iTMC-LECs) by Interface-Induced Color Shift

Long-Wavelength Light-Emitting Electrochemical Cells: Materials and Device Engineering

Long-wavelength light-emitting electrochemical cells (LECs) are potential deep-red and near infrared light sources with solution-processable simple device architecture, low-voltage operation, and compatibility with inert metal electrodes. Many scientific efforts have been made to material design and device engineering of the long-wavelength LECs over the past two decades. The materials designed the for long-wavelength LECs cover ionic transition metal complexes, small molecules, conjugated polymers, and perovskites. On the other hand, device engineering techniques, including spectral modification by adjusting microcavity effect, light outcoupling enhancement, energy down-conversion from color conversion layers, and adjusting intermolecular interactions, are also helpful in improving the device performance of long-wavelength LECs. In this review, recent advances in the long-wavelength LECs are reviewed from the viewpoints of materials and device engineering. Finally, discussions on conclusion and outlook indicate possible directions for future developments of the long-wavelength LECs. This review would like to pave the way for the researchers to design materials and device engineering techniques for the long-wavelength LECs in the applications of displays, bio-imaging, telecommunication, and night-vision displays.

Phenanthroimidazole as molecularly engineered switch for efficient and highly long-lived light-emitting electrochemical cell

Light-emitting electrochemical cells (LECs) based on Ir(III) complexes owing to the superior advantages exhibit high potential for display and lighting applications. Herein, a series of Ir(III) complexes based on phenanthroimidazole (PI) as an ancillary ligand were synthesized to achieve efficient and highly stable yellow-to-orange LEC devices with fast response. These complexes exhibit appropriate electrochemical stability and significant suppression of concentration quenching in the thin films compared to the archetype complex. The fabricated LECs showed remarkably long device lifetimes over 1400 and 2100 h and external quantum efficiency of 2 and 3% for yellow and orange-LECs, respectively. The obtained t1/2 for yellow LEC is much higher than archetype [Ir(ppy)2(phen)]+ and their phenanthroline-based analogues reported so far. The incorporation of an ionic tethered functional group on PI, improved the mobility of the emissive layer and reduced the device turn-on time by 75-88%. This study shows a facile functionalization and characterization of the PI ligand as well as its potential application in optoelectronic devices (OLED).

Cationic Zinc(II) Complexes with Carbazole-Type Counter-Anions: Intracomplex Donor/Acceptor Pairs Affording Exciplexes with Thermally Activated Delayed Fluorescence

Two cationic zinc(II) complexes with carbazole-type counter-anions, namely, [Zn(tpy)₂]²⁺[CAZ-p-BF₃^-]₂ (Zn-p) and [Zn(tpy)₂]²⁺[CAZ-o-BF₃^-]₂ (Zn-o), have been designed and synthesized, where tpy is 2,2':6',2″-terpyridine, CAZ-p-BF₃^- is 4-((9H-carbazol-9-yl)phenyl)trifluoroborate, and CAZ-o-BF₃^- is (2-(9H-carbazol-9-yl)phenyl)trifluoroborate. The complex cation [Zn(tpy)₂]²⁺ (as the acceptor) and the carbazole-type counter-anion CAZ-p-BF₃^- or CAZ-o-BF₃^- (as the donor) form an intracomplex donor/acceptor pair. Single-crystal structures reveal that compared to Zn-p, Zn-o exhibits a stronger π-π stacking interaction between the carbazole group (as the donor unit) of the counter-anion and the tpy ligand (as the acceptor unit) of [Zn(tpy)₂]²⁺ because of the different anchoring position of the BF₃^- anion in the counter-anion. In a doped film, Zn-p and Zn-o afford an isolated exciplex formed between the carbazole group and the tpy ligand within the single complex, which gives green-yellow emission with a thermally activated delayed fluorescence (TADF) feature. In crystalline states, Zn-p and Zn-o afford exciplexes with blue emission centered at 468 nm and green-blue emission centered at 508 nm, respectively. The Zn-p crystalline sample shows a relatively large singlet-triplet energy gap (ΔE_ST) (0.33 eV) and no TADF, whereas the Zn-o crystalline sample exhibits a small ΔE_ST (0.06 eV) and distinct TADF, with a reverse intersystem crossing rate at 3.3 × 10⁵ s^-1. Zn-p and Zn-o both exhibit intriguing mechanochromic luminescence, with largely red-shifted (by over 70 nm) emission and modulated TADF properties upon mechanically grinding the crystalline samples. The work demonstrates that donor/acceptor pairs affording exciplexes can be formed within cationic metal complexes using counter-anions with donor nature, which opens a new avenue toward photo-active metal complexes with rich photophysical properties.

Versatile Electroluminescence Color-Tuning Strategy of an Efficient Light-Emitting Electrochemical Cell (LEC) by an Ionic Additive

The color-tuning strategies of solid-state light-emitting devices (ss-LEDs) are mainly focused on engineering molecular structures. In this paper, for the first time, we developed a facile strategy for tuning the electroluminescence (EL) color from orange to green through the addition of the ionic additive TBAP (tetrabutylammonium perchlorate). To achieve the active ionic emissive compound for use in a light-emitting electrochemical cell (LEC), the neutral biscyclometalated bromo tetrazole iridium(III) [Ir(ppy)₂(BrTz)] was exchanged to its cationic complex, [Ir(ppy)₂(BrTz-Me)]ClO₄ (ppy = 2-phenyl pyridine, BrTz = 4-bromo-2-pyridine tetrazole, BrTz-Me = 4-bromo-2-pyridine methyl tetrazole) with a new synthetic strategy. This method allows employing neutral Ir-cyclometalated complexes, which are ruled out for use in LECs because of their non-ionic behaviors. In the following, an LEC based on the new cationic [Ir(ppy)₂(BrTz-Me)]ClO₄ as the emissive layer was fabricated between the FTO (fluorine-doped tin oxide) anode and Ga:In alloy cathode without using any additive or polymers, which makes this configuration the simplest ss-LED so far. By adding the ionic additives, the electroluminescence characteristics of [Ir(ppy)₂(BrTz-Me)]ClO₄ were dramatically increased, including luminance (L) from 162.8 cd/m² for the device with an additive to 212.9 and 355.9 cd/m² for devices containing LiTFSI (bis(trifluoromethane)sulfonamide lithium salt) and TBAP, respectively. In particular, when TBAP was added to the [Ir(ppy)₂(BrTz-Me)]ClO₄ complex, the irradiance was significantly increased from 166.4 to 220.8 μW/cm² with an efficacy of 1.78 cd/A and external quantum efficiency (EQE) value of 2.14%. The obtained EL results clearly showed that adding TBAP and LiTFSI significantly improved the electroluminescence characteristics and tuned the electroluminescence color.

Theoretical Approach for the Luminescent Properties of Ir(III) Complexes to Produce Red-Green-Blue LEC Devices

With an appropriate mixture of cyclometalating and ancillary ligands, based on simple structures (commercial or easily synthesized), it has been possible to design a family of eight new Ir(III) complexes (1A, 1B, 2B, 2C, 3B, 3C, 3D and 3E) useful as luminescent materials in LEC devices. These complexes involved the use of phenylpyridines or fluorophenylpyridines as cyclometalating ligands and bipyridine or phenanthroline-type structures as ancillary ligands. The emitting properties have been evaluated from a theoretical approach through Density Functional Theory and Time-Dependent Density Functional Theory calculations, determining geometric parameters, frontier orbital energies, absorption and emission energies, injection and transport parameters of holes and electrons, and parameters associated with the radiative and non-radiative decays. With these complexes it was possible to obtain a wide range of emission colours, from deep red to blue (701-440 nm). Considering all the calculated parameters between all the complexes, it was identified that 1B was the best red, 2B was the best green, and 3D was the best blue emitter. Thus, with the mixture of these complexes, a dual host-guest system with 3D-1B and an RGB (red-green-blue) system with 3D-2B-1B are proposed, to produce white LECs.

Synthesis, Study, and Application of Pd(II) Hydrazone Complexes as the Emissive Components of Single-Layer Light-Emitting Electrochemical Cells

For the first time, square planar Pd(II) complexes of hydrazone ligands have been investigated as the emissive components of light-emitting electrochemical cells (LECs). The neutral transition metal complex, [Pd(L¹)₂]·2CH₃OH (1), (HL¹ = (E)-N'-(phenyl(pyridin-2-yl)methylene)isonicotinhydrazide), was prepared and structurally characterized. Complex 1 displays quasireversible redox properties and is emissive at room temperature in solution with a λ_max of 590 nm. As a result, it was subsequently employed as the emissive material of a single-layer LEC with configuration FTO/1/Ga/In, where studies reveal that it has a yellow color with CIE(x, y) = (0.33, 0.55), a luminance of 134 cd cm^-2, and a turn-on voltage of 3.5 V. Protonation of the pendant pyridine nitrogen atoms of L¹ afforded a second ionic complex [Pd(L¹H)₂](ClO₄)₂ (2) which is also emissive at room temperature with a λ_max of 611 nm, resulting in an orange LEC with CIE(x, y) = (0.43, 0.53). The presence of mobile anions and cations in the second inorganic transition metal complex resulted in more efficient charge injection and transport which significantly improved the luminance and turn-on voltage of the device to 188.6 cd cm^-2 and 3 V, respectively. This study establishes Pd(II) hydrazone complexes as a new class of materials whose emissive properties can be chemically tuned and provides proof-of-concept for their use in LECs, opening up exciting new avenues for potential applications in the field of solid state lighting.

A Highly Efficient White Luminescent Zinc (II) Based Metallopolymer by RGB Approach

Three aryl-hydrazone O,N,O tridentate ligands with a different electron-withdrawing substituent were prepared. The introduction of a flexible charged chain in the ligands guaranteed solubility in many organic solvents and in water. The increasing withdrawing aptitude of the substituents red-shifted the emission in the correspondent metallopolymers. The metallated polymers were obtained by grafting ligand-zinc (II) coordination fragments onto commercial poly-(4-vinylpyridine). Metallopolymers thin films exhibited red, green and blue emission colors defined by Commission Internationale d'Eclairage (CIE) coordinates and medium to excellent photoluminescence (PL) quantum yields (PLQYs) comparable with other highly-performing active materials for Light-Emitting Diodes (LEDs). By grafting a suitable mix of the three different coordination pendants, an efficient single-component white emissive metallopolymer with CIE (0.30, 0.31) was prepared. Thanks to the charged moiety, the polymers resulted miscible with an ionic liquid. The addition produced homogeneous polymeric layers with unaltered PL performances, potentially employable in Light-emitting Electrochemical Cells (LECs).