Ladder-Type Dye with Large Transition Dipole Moment for Solvatochromism and Microphase Visualization

Fluorescence Lifetime Imaging of Lipid Heterogeneity in the Inner Mitochondrial Membrane with a Super-photostable Environment-Sensitive Probe

The inner mitochondrial membrane (IMM) undergoes dynamic morphological changes, which are crucial for the maintenance of mitochondrial functions as well as cell survival. As the dynamics of the membrane are governed by its lipid components, a fluorescent probe that can sense spatiotemporal alterations in the lipid properties of the IMM over long periods of time is required to understand mitochondrial physiological functions in detail. Herein, we report a red-emissive IMM-labeling reagent with excellent photostability and sensitivity to its environment, which enables the visualization of the IMM ultrastructure using super-resolution microscopy as well as of the lipid heterogeneity based on the fluorescence lifetime at the single mitochondrion level. Combining the probe and fluorescence lifetime imaging microscopy (FLIM) showed that peroxidation of unsaturated lipids in the IMM by reactive oxygen species caused an increase in the membrane order, which took place prior to mitochondrial swelling.

Synthesis and Application of Salicylhydrazone Probes with High Selectivity for Rapid Detection of Cu2

Using the aldehyde amine condensation procedure and the triphenylamine group as the skeleton structure, the new triphenylamine-aromatic aldehyde-succinylhydrazone probe molecule DHBYMH was created. A newly created acylhydrazone probe was structurally characterized by mass spectrometry (MS), NMR, and infrared spectroscopy (FTIR). Fluorescence and UV spectroscopy were used to examine DHBYMH's sensing capabilities for metal ions. Notably, DHBYMH achieved a detection limit of 1.62 × 10-7 M by demonstrating exceptional selectivity and sensitivity towards Cu2+ ions in an optimum sample solvent system (DMSO/H2O, (v/v = 7/3); pH = 7.0; cysteine (Cys) concentration: 1 × 10-4 M). NMR titration, high-resolution mass spectrometry analysis, and DFT computation were used to clarify the response mechanism. Ultimately, predicated on DHBYMH's reversible identification of Cu2+ ions in the presence of EDTA, a molecular logic gate was successfully designed.

Configuration-mediated excited-state energy dissipation in metal-bridged dimeric D-A fluorophores for enhanced photothermal therapy

Photothermal agents (PTAs) based on donor (D)-acceptor (A) NIR fluorophores show great promise in photothermal therapy due to their accessible molecular engineering to mediate excitation energy for high photothermal conversion. Except for molecular structural modification of D-A fluorophores, intermolecular arrangement in space greatly influences their excitation energy dissipation as well. But how to mediate their intermolecular arrangement is still challenging. Here we control the intermolecular orientation of chromophores via metal coordination to form Pt-bridged dimeric D-A fluorophores with different geometries. The formed configuration isomers show different intermolecular exciton coupling behaviors involving charge transfer (CT) evolution and internally limited molecular rotation, which greatly affect excited-energy dissipation. Compared with folded configuration with intense NIR emission (quantum yields (QYs) = 15.62 %), linear configuration favors non-radiative decays with low QYs (6.99 %) but enhanced photothermal conversion efficiency (PCE = 41.57 %). The self-assembled nanoparticles combining Pt-bridged dimeric D-A fluorophores with DSPE-PEG2000-RGD reveal superior photothermal therapeutic features with desirable biosafety. This research provides a new designing concept to mediate excited-state energy dissipation pathways at a sub-nano level for enhanced photothermal conversion. STATEMENT OF SIGNIFICANCE: D-A fluorophores as photothermal agents attract great attention in photothermal therapy due to their accessible molecular engineering. Besides molecular engineering of D-A fluorophores, the intermolecular packing manner is proven to greatly affect their excitation energy dissipation. But how to control intermolecular arrangement is still challenging. Here we control the intermolecular orientation of chromophores via metal coordination to form Pt-bridged dimeric D-A fluorophores with different geometries. Compared to the folded configuration, linear configuration facilitates charge transfer (CT) evolution and molecular rotation, which promotes non-radiative decays of excited energy for enhanced photothermal therapy.

Sulfone/Carbonyl-Based Donor-Acceptor Fluorescent Dyes: Synthesis, Structures, Photophysical Properties and Cell Imaging

Electron-accepting units play vital roles in constructing donor-acceptor (D-A) conjugated organic optoelectronic materials; the electronic structures and functions of the acceptors need to be carefully unveiled to controllably tailor the optoelectronic properties. We have synthesized two D-A conjugated organic fluorophores, TPA-SO and TPA-CO, with similar molecular skeletons based on sulfone- or carbonyl-containing polycyclic aromatic acceptors. Both TPA-SO and TPA-CO display obvious solvent polarity-dependent photophysical properties and large Stokes shift of over 100 nm for strong intramolecular charge transfer processes. Experimental evidence indicates that the sulfone group in TPA-SO merely serves as a strong electron-withdrawing unit. TPA-SO shows yellowish-green emission with a peak at 542 nm and an absolute photoluminescence quantum yield (PLQY) of 98 % in solution, whereas the carbonyl group in TPA-CO can act as both an electron-withdrawing unit and spin transition convertor, so TPA-CO displays red emission with a low absolute PLQY of 0.32 % in solution. Impressively, upon going from solution to aggregate state, TPA-SO nanoparticles keep a high PLQY of 9.5 % and moderate biocompatibility, thus they are good nano-agents for cellular fluorescence imaging. The results reveal that the inherent acceptor characteristic acts as a crucial effect in the photophysical properties and applications of the organic fluorophores.

Extending Conjugation of Linear Cyanostilbene Derivatives via a Pyridine Moiety for Multi-Stimuli-Responsive Fluorescence Organogels

In the design of effective gelators with aggregation-induced emission behavior, amide and cholesterol moieties are generally used to provide multiple driving forces for gelation. In this work, a series of linear cyanostilbene gelators with a pyridine moiety and different lengths of the alkoxyl group, i.e., CSpy-Cn, have been synthesized through nucleophilic substitution and Knoevenagel reaction. The direct connection of pyridine extends the conjugation of the cyanostilbene moiety, while the alkoxyl group can regulate the solubility of the compounds so that the compounds can serve as gelators for common solvents such as acetonitrile, dimethyl sulfoxide, and ethanol at ultra-low concentrations. At the same time, the cyanostilbene group makes the compounds undergo photoisomerization and emit fluorescence under UV light, while the pyridine group can serve as an acid-base responsive group due to easy protonation. The gels can respond to temperature, light, and organic acid/base. The fluorescence intensity and color can reversibly change during the gel-sol transitions. Finally, a thin film based on the CSpy-C8 xerogel has been prepared and utilized as a multi-stimuli-responsive fluorescence display for information storage and anti-counterfeiting.

Leveraging Coupled Solvatofluorochromism and Fluorescence Quenching in Nitrophenyl-Containing Thiazolothiazoles for Efficient Organic Vapor Sensing

Solvatofluorochromic molecules provide strikingly high fluorescent outputs to monitor a wide range of biological, environmental, or materials-related sensing processes. Here, thiazolo[5,4-d]thiazole (TTz) fluorophores equipped with simple alkylamino and nitrophenyl substituents for solid-state, high-performance chemo-responsive sensing applications are reported. Nitroaromatic substituents are known to strongly quench dye fluorescence, however, the TTz core subtly modulates intramolecular charge transfer (ICT) enabling strong, locally excited-state fluorescence in non-polar conditions. In polar media, a planar ICT excited-state shows near complete quenching, enabling a twisted excited-state emission to be observed. These unique fluorescent properties (spectral shifts of 0.13 - 0.87 eV and large transition dipole moments Δµ = 20.4 - 21.3 D) are leveraged to develop highly sought-after chemo-responsive, organic vapor optical sensors. The sensors are developed by embedding the TTz fluorophores within a poly(styrene-isoprene-styrene) block copolymer to form fluorescent dye/polymer composites (Φ_F = 70 - 97%). The composites respond reversibly to a comprehensive list of organic solvents and show low vapor concentration sensing (e.g., 0.04% solvent saturation vapor pressure of THF - 66 ppm). The composite films can distinguish between solvent vapors with near complete fluorescent quenching observed when exposed to their saturated solvent vapor pressures, making this an extremely promising material for optical chemo-responsive sensing.

Lighting up RNA-specific multi-photon and super-resolution imaging using a novel zinc complex

Ribonucleic acid (RNA) probes are critical for understanding the role of RNA dynamics in cellular function but are in short supply due to the lack of optimized imaging systems and excellent fluorescence emission performance. Here, the terpyridine Zn(II) complex (Zn-T) with D-π-A configuration and bright aggregation-induced fluorescence emission (AIE) has been fabricated for the selective detection and real-time monitoring of RNA. Impressively, Zn-T exhibits a large Stokes shift and three-photon absorption (3PA) activity and responds specifically through hydrophobic interactions with an RNA pocket. The combination of AIE-assisted two-photon fluorescence and stimulated emission depletion (STED) microscopy of Zn-T for imaging nuclear RNA has higher spatial resolution and brightness, thus providing an imaging platform for studying RNA-related physiological or pathological processes.

Coordination-Regulated Terpyridine-Mn(II) Complexes for Photodynamic Therapy Guided by Multiphoton Fluorescence/Magnetic Resonance Imaging

The synergy of multiphoton fluorescence imaging (MP-FI) and magnetic resonance imaging (MRI) provides an imaging platform with high resolution and unlimited penetration depth for early disease detection. Herein, two kinds of terpyridine-Mn(II) complexes (FD-Mn-O₂NO and FD-Mn-FD) possessing seven and six coordination modes, respectively, were designed rationally for photodynamic therapy (PDT) guided by MP-FI/MRI. The complexes obtain different multiphoton fluorescence/magnetic resonance properties by adjusting the number of terpyridine ligands. Among them, FD-Mn-FD exhibits the following superiorities: (1) The optimal three-photon excitation wavelength of FD-Mn-FD falls at 1450 nm (NIR-II), which brings high sensitivity and deep tissue penetration in MP-FI. (2) FD-Mn-FD has effective longitudinal relaxation efficiency (r₁ = 2.6 m M^-1 s^-1), which can be used for T₁-weighted MRI, overcoming the problems of limited tissue penetration depth and low spatial resolution. (3) FD-Mn-FD generates endogenous ¹O₂ under irradiation by 808 nm light, thereby enhancing the PDT effect in vitro and in vivo. To the best of our knowledge, the complex FD-Mn-FD is the first complex to guide PDT through MP-FI/MRI, providing a blueprint for accurate and effective early detection and timely treatment of the complex in the early stages of cancer.

Rational design of a small organic photosensitizer for NIR-I imaging-guided synergistic photodynamic and photothermal therapy

Developing a small molecular photosensitizer to achieve multimodal phototherapy has recently garnered attention as a promising strategy for efficient cancer treatment. However, synthesis of a multifunctional small molecular photosensitizer has remained challenging. Here we report an aggregation-induced-emission (AIE)-featured luminogen (AIEgen) TPA-BTZ decorated with long and branched alkyl chains. TPA-BTZ shows long-wavelength emission at ca. 800 nm in the NIR-I region. Moreover, upon laser irradiation, TPA-BTZ could produce O₂˙^- and ¹O₂via both type I and type II mechanisms for enhanced photodynamic therapy (PDT). The propeller-like structure triphenylamine (TPA) rotators not only endow TPA-BTZ with AIE characteristics but also facilitate heat generation by intramolecular rotation for photothermal therapy (PTT). More importantly, long and branched alkyl chains can create intermolecular spatial isolation in the fabricated TPA-BTZ@PEG2000 nanoparticles (NPs) to allow sufficient intramolecular motion for photothermal conversion. Due to these unique features, in vitro and in vivo evaluations demonstrate that the TPA-BTZ@PEG2000 NPs exhibited long-term NIR-imaging ability, superior tumoricidal activity, and suppressed tumor growth. This research provides new insights for developing new AIEgens for NIR imaging-guided multimodal phototherapy.

Deep-Red Emissive Squaraine-AIEgen in Elastomer Enabling High Contrast and Fast Thermoresponse for Anti-Counterfeiting and Temperature Sensing

Two challenges remain for organic thermoresponsive materials; one is to develop high-performance red-emissive thermoresponsive materials, while another is to simultaneously achieve high contrast ratio (CR), fast and reversible thermoresponse in a single element. Herein, we not only develop a new deep-red emissive squaraine-based AIEgen (TPE-SQ12) based on a pyrylium end group, which is suitable for fabricating high-performance thermoresponsive materials, but also show an effective approach to improve both CR (∼ten times increase) and response time (less than 3 seconds), that is, molecularly dispersing AIEgen into an elastomer, attributed to the significantly expanded free volume of elastomer upon increasing the temperature that can activate the AIEgen intramolecular movements more pronouncedly. Double encryption and temperature mapping systems have been separately established by using our designed elastomer/TPE-SQ12 film, showing the great potential for anti-counterfeiting and temperature sensing. Finally, white emission is further achieved by co-doping TPE-SQ12 with cyan dye into elastomer, which enables fluorescent thermochromism for improving the temperature mapping ability.

Design of a Metallacycle-Based Supramolecular Photosensitizer for In Vivo Image-Guided Photodynamic Inactivation of Bacteria

Bacterial infection is one of the greatest threats to public health. In vivo real-time monitoring and effective treatment of infected sites through non-invasive techniques, remain a challenge. Herein, we designed a Pt^II metallacycle-based supramolecular photosensitizer through the host-guest interaction between a pillar[5]arene-modified metallacycle and 1-butyl-4-[4-(diphenylamino)styryl]pyridinium. Leveraging the aggregation-induced emission supramolecular photosensitizer, we improved fluorescence performance and antimicrobial photodynamic inactivation. In vivo studies revealed that it displayed precise fluorescence tracking of S. aureus-infected sites, and in situ performed image-guided efficient PDI of S. aureus without noticeable side effects. These results demonstrated that metallacycle combined with host-guest chemistry could provide a paradigm for the development of powerful photosensitizers for biomedicine.

Dual-Mode Photonic Sensor Array for Detecting and Discriminating Hydrazine and Aliphatic Amines

Colorimetric chemosensors have attracted tremendous interest for sensing hazardous substances in an uncomplicated and economical manner. Herein, a series of push-pull dicyanovinyl-substituted oligothiophene derivatives were designed, and the impacts of different end-cappers on their photophysical properties were comprehensively investigated. Interestingly, combined with a zinc porphyrin derivative (Zn-TPP), one dicyanovinyl-substituted oligothiophene derivative (NA-3T-CN) can be further developed into colorimetric and fluorescent sensor array for dual-mode detection of aliphatic amines and hydrazine. The obtained sensors showed satisfactory results between optical response and analyte's concentration both in selective single-sensor type and in enhanced multisensory mode. Based on the fluorescence change of the NA-3T-CN system, the detection limit for N₂H₄ was calculated to be around 1.22 × 10^-5 mol/L in THF. The stained TLC-supported sensor array offers obvious optical changes for down to 0.5 wt % hydrazine solution for naked-eye sensing. An aromatic amine like aniline has no obvious effect on the dicyanovinyl-substituted oligothiophene derivatives. We also found that a zinc porphyrin derivative has an obvious colorimetric response to the presence of hydrazine, ethanolamine, and aniline. Furthermore, smartphone-enabled readout system and data treatment based on RGB changes of the sensor array were performed, and the discrimination capability among hydrazine, aliphatic amines, and aromatic amine was satisfactory. In this regard, related push-pull oligothiophene derivatives not only can be regarded as models for a fundamental understanding of the relationship between molecular structure and photophysical properties but also present potential applications in the field of real-time and visual detection of hazardous chemicals.