CoO Promoted the Catalytic Activity of Nitrogen-Doped MoS2 Supported on Carbon Fibers for Overall Water Splitting

Room-temperature sulfur doped NiMoO4 with enhanced conductivity and catalytic activity for efficient hydrogen evolution reaction in alkaline media

Transition metal oxides have been acknowledged for their exceptional water splitting capabilities in alkaline electrolytes, however, their catalytic activity is limited by low conductivity. The introduction of sulfur (S) into nickel molybdate (NiMoO4) at room temperature leads to the formation of sulfur-doped NiMoO4 (S-NiMoO4), thereby significantly enhancing the conductivity and facilitating electron transfer in NiMoO4. Furthermore, the introduction of S effectively modulates the electron density state of NiMoO4 and facilitates the formation of highly active catalytic sites characterized by a significantly reduced hydrogen absorption Gibbs free energy (ΔGH*) value of -0.09 eV. The electrocatalyst S-NiMoO4 exhibits remarkable catalytic performance in promoting the hydrogen evolution reaction (HER), displaying a significantly reduced overpotential of 84 mV at a current density of 10 mA cm-2 and maintaining excellent durability at 68 mA cm-2 for 10 h (h). Furthermore, by utilizing the anodic sulfide oxidation reaction (SOR) instead of the sluggish oxygen evolution reaction (OER), the assembled electrolyzer employing S-NiMoO4 as both the cathode and anode need merely 0.8 V to achieve 105 mA cm-2, while simultaneously producing hydrogen gas (H2) and S monomer. This work paves the way for improving electron transfer and activating active sites of metal oxides, thereby enhancing their HER activity.

A stable N-doped NiMoO4/NiO2 electrocatalyst for efficient oxygen evolution reaction

Recently, there has been a significant interest in the study of highly active and stable transition metal-based electrocatalysts for the oxygen evolution reaction (OER). Non-noble metal nanocatalysts with excellent inherent activity, many exposed active centers, rapid electron transfer, and excellent structural stability are especially promising for the displacement of precious-metal catalysts for the production of sustainable and "clean" hydrogen gas through water-splitting. Herein, efficient electrocatalyst N-doped nickel molybdate nanorods were synthesized on Ni foam by a hydrothermal process and effortless chemical vapor deposition. The heterostructure interface of N-NiMoO4/NiO2 led to strong electronic interactions, which were beneficial for enhancing the OER activity of the catalyst. Excellent OER catalytic activity in 1.0 M KOH was shown, which offered a small overpotential of 185.6 mV to acquire a current density of 10 mA cm-2 (superior to the commercial benchmark material RuO2 under the same condition). This excellent electrocatalyst was stable for 90 h at a constant current density of 10 mA cm-2. We created an extremely reliable and effective OER electrocatalyst without the use of noble metals by doping a nonmetal element with nanostructured heterojunctions of various active components.

Fabrication of MoS2/rGO hybrids as electrocatalyst for water splitting applications

Environmental degradation and energy constraint are important risks to long-term sustainability in the modern world. Water splitting is a vital approach for environmentally friendly and sustainable energy storage, providing a clean way to produce hydrogen without pollutants. Preparing a catalyst that is active, bifunctional, and durable for water splitting is a difficult task. We addressed the difficulty by creating a bifunctional heterogeneous catalyst, MoS2/rGO, with an ideal weight percentage of 5 wt% by a hydrothermal process. The optimized sample showed exceptional electrocatalytic activity, requiring an overpotential of 242 mV and 120 mV to achieve a current density of 10 mA cm-2 in the Hydrogen Evolution Reaction (HER) and Oxygen Evolution Reaction (OER). Furthermore, our synthesized catalyst was validated for its exceptional water-splitting capacity, with the optimized sample showing low Tafel slope values of 59 mV dec-1 for HER and 171 mV dec-1 for OER. The significant OER and HER activity seen in the 5 wt% MoS2/rGO hybrid, compared to other hybrids, is due to the many catalytic active sites that aid in charge and electron transport, as well as the synergistic interaction between MoS2 and rGO.

Rapid Formation of Epitaxial Oxygen Evolution Reaction Catalysts on Dendrites with High Catalytic Activity and Stability

Oxygen evolution reaction is an essential but kinetically sluggish step in many energy storage and conversion processes and therefore is in pursuit of highly efficient and stable catalysts. Although nanosized transition-metal-based oxides/hydroxides exhibit high catalytic activity toward the oxygen evolution reaction (OER), many of them suffer from low stability at an anode current density in industrial scale. Herein, by combining a rapid epitaxial formation method with dynamic bubble-templated electrodeposition, we successfully developed single crystalline NiFeCu oxide catalysts with a hierarchical porous structure. It was found that the structure can facilitate fast electron transportation for the catalysts and retard the diffusion of the O atoms to the inner metallic current collector. The hierarchical pores inherited from the hydrogen bubble templates built ideal channels for the massive and rapid release of oxygen bubbles. As a consequence, the NiFeCu oxides catalyzed the OER more efficiently and steadily than the commercial RuO2 catalyst at an anode current density in industrial scale (300 mA/cm2). This work, by resolving the durability concerns for nanosized oxides, offers a series of highly efficient and stable catalysts for OER and a structure building strategy to boost the catalytic activity and stability for nonconductive catalysts.

Textile Waste-Derived Cobalt Nanoparticles Embedded in Active Carbon Fiber for Efficient Activation of Peroxymonosulfate to Remove Organic Pollutants

Burning and dumping textile wastes have caused serious damage to the environment and are a huge waste of resources. In this work, cobalt nanoparticles embedded in active carbon fiber (Co/ACF) were prepared from bio-based fabric wastes, including cotton, flax and viscose. The obtained Co/ACF was applied as a catalyst for the heterogeneous activation of peroxymonosulfate (PMS) to remove bisphenol A (BPA) from an aqueous solution. The results showed that cotton-, flax- and viscose-derived Co/ACF all exhibited excellent performance for BPA degradation; over ~97.0% of BPA was removed within 8 min. The Co/ACF/PMS system exhibited a wide operating pH range, with a low consumption of the catalyst (0.1 g L-1) and PMS (0.14 g L-1). The high specific surface area (342 m2/g) and mesoporous structure of Co/ACF allowed the efficient adsorption of pollutants as well as provided more accessible active sites for PMS activation. This study provided an example of using textile wastes to produce a valuable and recyclable catalyst for environmental remediation.

Alkylamine-Confined Thickness-Tunable Synthesis of Co(OH)2-CoO Nanosheets toward Oxygen Evolution Catalysis

Thickness regulation of transition metal hydroxides/oxides nanosheets with superior catalytic properties represents a promising strategy to enhance catalytic performance, but it remains an enormous challenge to achieve precise control, especially when it comes to the ultrathin limit (several atomic layers). In this work, a facile strategy of alkylamine-confined growth is proposed for the synthesis of thickness-tunable metal hydroxide/oxide nanosheets. Specifically, ultrathin cobalt hydroxide and cobaltous oxide hybrid (Co(OH)₂-CoO) nanosheets (Co-O NSs) with a thickness in the range of 2-6 nm (5-13 atomic layers) are synthesized by using alkylamines with different carbon chain lengths as the ligand to modulate vertical coordination ability. Co-O NSs with a thickness of 2 nm (Co-O NSs-2 nm) exhibit excellent oxygen evolution reaction (OER) performance with an overpotential of 278 mV at 10 mA/cm². The maximized number of active sites including oxygen vacancies, optimal adsorption strength, and the highest electrical conductivity are considered as the potential factors contributing to the excellent OER performance of Co-O NSs-2 nm. This work holds great significance for the precise thickness-tunable synthesis of transition metal layered hydroxide nanosheets with modulated and improved catalytic performance.

Hot-carrier photocatalysts for artificial photosynthesis

We applied hot-carrier extraction to particulate photocatalysts for artificial photosynthetic reactions including water splitting for H₂ production and CO₂ reduction to CO and HCOOH, and elucidated promising features of hot-carrier photocatalysts (HC-PCs). We designed a specific structure of the HC-PC; a semiconductor core in which thermalization of photo-generated carriers is significantly suppressed is surrounded by a shell whose bandgap is wider than that of the core. Among the photo-generated hot carriers in the core, only carriers whose energies are larger than the shell bandgap are extracted passing through the shell to the active sites on the shell surface. Thus, the shell functions as an energy-selective contact. We calculated the upper bounds of the rates of the carrier supply from the core to the active sites using a newly constructed detailed-balance model including partial thermalization and nonradiative recombination of the carriers. It has been revealed that the HC-PCs can yield higher carrier-supply rates and thus potentially higher solar-to-chemical energy conversion efficiencies for H₂ and CO production than those of conventional photocatalysts with the assistance of intraband transition and Auger recombination/impact ionization. It should be noted, however, that one of the necessary conditions for efficient hot-carrier extraction is sufficiently large carrier density in the core, which, in turn, requires concentrated solar illumination by several hundreds. This would raise rate-limiting problems of activities of the chemical reactions induced by the photo-generated carriers and material-transfer properties.

N-Doped MoS2 Nanoflowers for Efficient Cr(VI) Removal

The removal of Cr(VI) has attracted extensive attention since it causes serious harm to public health. Herein, we report a two-step method to synthesize N-doped MoS₂ nanoflowers (NFs) with controllable sizes, which are first utilized for Cr(VI) removal and display outstanding removal performance. The N-MoS₂ NFs with an average size of 40 nm (N-MoS₂ NFs-40 nm) can rapidly remove Cr(VI) in 15 min under optimal conditions. The maximum adsorption capacity of N-MoS₂ NFs-40 nm can reach 787.41 mg·g^-1, which is significantly larger than that of N-MoS₂ NFs-150 and -400 nm (314.46 and 229.88 mg·g^-1). Meanwhile, N-MoS₂ NFs-400 nm have a higher maximum adsorption capacity than pure MoS₂ NFs-400 nm (172.12 mg·g^-1). In this adsorption/reduction process, N-MoS₂ NFs have abundant adsorption sites due to a high surface area. N doping can generate more sulfur vacancy defects in the MoS₂ NF structure to accelerate electron transfer and enhance the reduction of Cr(VI) to low-toxicity Cr(III). This study provides a facile approach to fabricating N-MoS₂ nanoflowers and demonstrates their superior removal ability for Cr(VI).

Fe-CoP/C composite nanoplate derived from 2D porphyrin MOF as an efficient catalyst for oxygen evolution reaction

The 2D Fe-CoP/C composite transformed from 2D PPF-5-Fe/Co MOF presents a high activity for the oxygen evolution reaction in alkaline media.

Sulfur dopant-enhanced neutral hydrogen evolution performance in MoO3nanosheets

Developing nonprecious-metal based catalysts with highly active and stable performance for hydrogen evolution reaction (HER) in neutral media is crucial points for realizing low-carbon economy because their practical use typically suffers from the slow kinetics. Herein, we developed S-doped MoO₃nanosheets toward neutral HER, fabricated by a versatile solvothermal and subsequently sulfuration processes. The obtained catalyst exhibits a small overpotential of 106 mV to reach 10 mA cm^-2in 1.0 M phosphate buffered saline, overwhelming most of recently reported catalysts. Meantime, it shows no notable deactivation after more than 60 h continuous electrolysis and 50 000 cycling tests. More importantly, the catalyst also can be applied in buffered seawater for electrocatalyzing HER, requiring 262 mV at 10 mA cm^-2and maintaining over 60 h. These findings open a new route for designing MoO₃-based catalysts for neutral hydrogen production.

Partial sulfur vacancies created by carbon-nitrogen deposition of MoS2 for high-performance overall electrocatalytic water splitting

Electrocatalytic water splitting is a promising energy-efficient solution to obtain clean hydrogen energy. Bifunctional electrocatalysts made up of cheap and abundant elements and suitable for both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) are critically needed, yet their performance deserves substantial improvement. The catalytic activity could be improved by creating unsaturated defects, which so far has rarely been demonstrated. Here, we combine the effects of unsaturated sulfur vacancies and bi-elemental C and N doping in MoS₂ nanosheets to achieve high-performance bifunctional electrocatalysts. The new method to obtain C and N doped MoS₂ at high temperature is presented. The obtained C-N-MoS₂/CC-T catalysts with S unsaturated defect sites and Mo-N links exhibit high activity and improved electrical conductivity for both the HER and OER in alkaline media. Systematic experiments and density functional theory (DFT) analysis confirm that CN-doping exposes catalytically active sites and enhances water adsorption. The optimized C-N-MoS₂/CC-700 catalyst exhibits low overpotentials of 90 and 230 mV at 10 mA cm^-2 for the HER and OER, respectively. Importantly, the porous C-N-MoS₂/CC-700 nanosheets deliver low voltages of 1.58 V for the overall water splitting at 10 mA cm^-2 and robust operation for 30 h without any reduced activity. Such impressive performances are attributed to their unique structure with large specific surface area, abundant S unsaturated sites, Mo-N links, and shortened electron transfer paths. This partial defect filling by the bi-dopant incorporation approach is generic and is promising for a broad range of advanced energy materials.

Particulate photocatalytic reactors with spectrum-splitting function for artificial photosynthesis

We have applied spectrum splitting, which is the most reliable way for highly efficient solar energy utilization, to particulate photocatalytic reactors. We have elucidated that the spectrum splitting is feasible using plural cells/compartments, in which photocatalyst particles of different bandgaps are suspended respectively, arranged optically in series. When the particles are sufficiently small (≤20 nm in diameter), high-energy photons are absorbed in the wide-gap cell/compartment on the solar illumination side while low-energy photons reach the backside narrow-gap cell/compartment with being scarcely diffuse-reflected. We have proposed two concrete configurations of the reactors: wide-gap cell/narrow-gap Z-scheme cell (WG/Z), and wide-gap cell/two-compartment cell of middle-gap and narrow-gap (WG/MG-NG), based on the previous configuration of a two-compartment cell of wide-gap and narrow-gap (WG-NG). We have constructed a new model of the carrier supply process from the semiconductor photocatalysts to the active sites, and calculated the practical upper limits of the carrier supply rates and solar-to-chemical conversion efficiencies. The spectrum-splitting reactors can yield higher efficiencies of artificial photosynthetic H2 and CO production by up to 1.5-1.6 times than the conventional Z-scheme reactors. The newly proposed WG/Z reactor widens the room of the material developments and improves the robustness against solar spectrum variation, and hence would be a promising practical solution, although the efficiency is slightly lower than that for the ideal WG-NG reactor. The WG/MG-NG reactor yields the highest efficiency among the three configurations, with high spectral robustness.

Iron Phthalocyanine/Two-Dimensional Metal-Organic Framework Composite Nanosheets for Enhanced Alkaline Hydrogen Evolution

Hydrogen evolution reaction (HER) in alkaline medium is currently under scientific spotlight for generating clean H₂ fuel from electrochemical water splitting. However, alkaline HER suffers from sluggish reaction kinetics because of the additional energy required for water dissociation from catalysts in contrast to acidic HER. Herein, we report the development of two-dimensional metal-organic framework (2D MOF) Ni-1,4-benzenedicarboxylic acid-based composite nanosheets for superior performance in HER electrocatalysis. Iron phthalocyanine (FePc) molecules are uniformly anchored on the ultrathin 2D Ni-MOF, showing a substantially increased current density, improved activity, and enhanced durability in alkaline HER. On account of the ultralarge specific surface of Ni-MOF and the coupling effects between FePc and 2D MOFs, the resultant nanosheet catalyst FePc@Ni-MOF exhibits a low overpotential (334 mV) and satisfactory long-term stability (10 h) at a current density of 10 mA·cm^-2, which outperform those of pristine FePc, Ni-MOF, and the counterpart FePc@bulk-MOF. This study provides new insights into the synthesis of robust MOF-based nanosheet composites with high performance in catalysis.

Imidazolatic-Framework Bimetal Electrocatalysts with a Mixed-Valence Surface Anchored on an rGO Matrix for Oxygen Reduction, Water Splitting, and Dye Degradation

This paper presents a simple strategy for manufacturing bifunctional electrocatalysts-graphene nanosheets (GNS) coated with an ultrafine NiCo-MOF as nanocomposites (denoted NiCo-MOF@GNS) having a N-doped defect-rich and abundant cavity structure through one-pool treatment of metal-organic frameworks (MOFs). The precursors included N-doped dodecahedron-like graphene nanosheets (GNS), in which the NiCo-MOF was encompassed within the inner cavities of the GNS (NiCo-MOF@GNS) at the end or middle portion of the tubular furnace with several graphene layers. Volatile imidazolate N _x species were trapped by the NiCo-MOF nanosheets during the pyrolysis process, simultaneously inserting N atoms into the carbon matrix to achieve the defect-rich porous nanosheets and the abundantly porous cavity structure. With high durability, the as-prepared nanomaterials displayed simultaneously improved performance in the oxygen reduction reaction (ORR), the oxygen evolution reaction (OER), and photocatalysis. In particular, our material NiCo-MOF@GNS-700 exhibited excellent electrocatalytic activity, including a half-wave potential of 0.83 V (E _ORR, 1/2), a low operating voltage of 1.53 V (E _OER, 10) at 10 mA cm^-2, a potential difference (ΔE) of 1.02 V between E _OER, 10 and E _ORR, 1/2 in 0.1 M KOH, and a low band gap of 2.61 eV. This remarkable behavior was due to the structure of the defect-rich porous carbon nanosheets and the synergistic impact of the NPs in the NiCo-MOF, the N-doped carbon, and NiCo-N _x . Furthermore, the hollow structure enhanced the conductivity and stability. This useful archetypal template allows the construction of effective and stable bifunctional electrocatalysts, with potential for practical viability for energy conversion and storage.

Enhanced electrocatalytic activity of PtRu/nitrogen and sulphur co-doped crumbled graphene in acid and alkaline media

The low mass activity and high price of pure platinum (Pt)-based catalysts predominantly limit their large-scale utilization in electrocatalysis. Therefore, the reduction of Pt amount while preserving the electrocatalytic efficiency represents a viable alternative. In this work, we prepared new PtRu₂ nanoparticles supported on sulphur and nitrogen co-doped crumbled graphene with trace amounts of iron (PtRu₂/PF) electrocatalysts. The PtRu₂/PF catalysts exhibited enhanced electrocatalytic performance and stability for the hydrogen evolution reaction (HER) at pH = 0. Moreover, the prepared PtRu₂/PF electrocatalyst displayed higher HER activity than commercial 20% Pt/C. The PtRu₂/PF catalyst achieved a current density of 10 mA cm^-2 at an overpotential value of only 22 mV for HER, performing better activity than many other Pt-based electrocatalysts. Besides, the PtRu₂/PF revealed a good performance for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in alkaline media. The PtRu₂/PF catalyst recorded a current density of 10 mA cm^-2 at an overpotential of only 270 mV for OER in KOH (1.0 M) solution and an onset potential of 0.96 V vs. RHE (at 1 mA cm^-2) for ORR in KOH (0.1 M) solution.

Single WTe2 Sheet-Based Electrocatalytic Microdevice for Directly Detecting Enhanced Activity of Doped Electronegative Anions

The high electrical conductivity of 1T'-WTe₂ deserves particular attention and may show a high potential for hydrogen evolution reaction (HER) catalysis. However, the actual activity certainly does not match expectations, and the inferior HER activity is actually still ambiguous at the atomic level. Unraveling the underlying HER behaviors of 1T'-WTe₂ will give rise to a new family of HER catalysts. Our structural analysis reveals that the inferior activity could result from insufficient charge density around the Te site and blocked adsorption channel at the W site, which cause too weak hydrogen adsorption. Herein, we fabricated a single WTe₂ sheet-based electrocatalytic microdevice for directly extracting enhanced HER activity of doped electronegative F atoms. The overpotential at -10 mA cm^-2 reduced to 0.27 V after F doping compared to 0.45 V for the original state. In situ electrochemical measurement and electrical tests on a single sheet indicate that doped F can regulate surface charge and hydrogen adsorption behavior. Furthermore, the theory simulation uncovers that the smaller atomic radius of F contributes to an empty coordination environment; meanwhile, strong electronegativity induces hydrogen adsorption. Thus, the ΔG_H^* at W sites around the doped F is as low as 0.18 eV. Synergistically modulating the charge properties and opening steric hindrance provides a new pathway to rationally construct electrocatalysts and beyond.

Interfacial Engineering-Triggered Bifunctionality of CoS2 /MoS2 Nanocubes/Nanosheet Arrays for High-Efficiency Overall Water Splitting

Searching for high-efficiency nonprecious bifunctional electrocatalysts for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is paramount for the advancement of water electrolysis technologies and the associated renewable energy devices. Modulation of electronic structure of an electrocatalyst via heterointerface engineering represents an efficient strategy to improve its electrocatalytic performance. Herein, a feasible hydrothermal synthesis of a novel heterostructured catalyst was demonstrated, comprising CoS₂ nanocubes and vertically aligned MoS₂ nanosheet arrays directly grown on flexible and conductive carbon cloth (CC) substrate (denoted as CoS₂ /MoS₂ @CC). Thanks to the elaborate interface engineering and vertically aligned nanosheet arrayed architecture, the resultant self-supported CoS₂ /MoS₂ @CC electrode possessed enriched exposed active sites, modulated electronic configuration, multidimensional mass transport channels, and outstanding mechanical strength, thereby affording exceptional electrocatalytic performances towards the HER and OER in alkaline electrolyte with overpotentials of 71 and 274 mV at 10 mA cm^-2 , respectively. In addition, a two-electrode electrolyzer assembled by CoS₂ /MoS₂ @CC required a cell voltage of 1.59 V at 10 mA cm^-2 with nearly 100 % faradaic efficiency and remarkable durability, showing great potential for scalable and economical water electrolysis.

Activation Strategy of MoS2 as HER Electrocatalyst through Doping-Induced Lattice Strain, Band Gap Engineering, and Active Crystal Plane Design

Doping engineering emerges as a contemporary technique to investigate the catalytic performance of MoS₂. Cation and anion co-doping appears as an advanced route toward electrocatalytic hydrogen evolution reaction (HER). V and N as dopants in MoS₂ (VNMS) build up a strain inside the crystal structure and narrow down the optical band gaps manifesting the shifting of the absorbance band toward lower energy and improved catalytic performance. FE-SEM, HR-TEM, and XRD analysis confirmed that V and N doping decreases agglomeration possibility, particle size, developed strain, and crystal defects during crystal growth. Frequency shift and peak broadening in Raman spectra confirmed the doping induced strain generation in MoS₂ leading to the modification of acidic and alkaline HER (51 and 110 mV @ 10 mAcm^-2, respectively) performance. The improved donor density in VNMS was confirmed by the Mott-Schottky analysis. Enhanced electrical conductivity and optimized electronic structures facilities H* adsorption/desorption in the catalytically active (001) plane of cation and anion co-doped MoS₂.

Ultralow Ru-Induced Bimetal Electrocatalysts with a Ru-Enriched and Mixed-Valence Surface Anchored on a Hollow Carbon Matrix for Oxygen Reduction and Water Splitting

Rational design of trifunctional electrocatalysts with robust efficiency used for oxygen reduction, oxygen evolution, and hydrogen evolution reactions (ORR, OER, and HER) is of significance to renewable energy conversion techniques, which remains a challenging issue. This study integrates dominant Co/Co₃O₄ with a small fraction of RuO₂ and the CoRu alloy anchored on a hollow carbon matrix, originating from the novel Ru-doped hollow metal-organic framework (MOF) precursor, which is synthesized via tannic etching and ion exchange. Notably, the introduced ultralow Ru (1.28 wt %) not only generates new Ru-based species but also induces a Ru-enriched surface with abundant oxygen vacancies. Moreover, a suitable balance among different valencies of Co or Ru can be tuned by oxidation time, resulting in preferable Co²⁺ and Ru⁴⁺ species. Triggered by these unparalleled surface properties along with good conductivity, hollow structure, and the synergistic effect of multiple active sites, the resulting CoRu-O/A@hollow nitrogen-doped carbon (HNC) shows robust catalytic performance for ORR/OER/HER in an alkaline electrolyte. Typically, it exhibits a potential gap of 0.662 V for OER/ORR and enables an alkaline water electrolyzer with a cell voltage of 1.558 V at 10 mA cm^-2. This work would serve as guidance for well construction of transition-metal-based trifunctional electrocatalysts by the MOF-assisted strategy or the modulation effects of low-content Ru.

Cobalt-based heterogeneous catalysts in an electrolyzer system for sustainable energy storage

Nowadays, the production of hydrogen and oxygen focuses on renewable energy techniques and sustainable energy storage. A substantial challenge is to extend low-cost electrocatalysts consisting of earth-abundant resources, prepared by straightforward approaches that display high intrinsic activity compared to noble metals. The expansion of bifunctional catalysts in alkaline electrolytes for both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) has become very crucial in recent times. Herein, the recent progress in cobalt-based HER-OER electrocatalysts has been are brushed up and numerous bifunctional cobalt-based catalysts such as cobalt-oxides, phosphides, sulfides, selenides, nitrides, borides, carbides, perovskites, and MOF-based cobalt analogs have been investigated in detail. Specifically, much more attention has been paid to their structural variation, bifunctional activity, overpotential of the overall system, and stability. Cobalt-based catalysts with lower cell voltage, remarkable durability, and unique electronic structures, offer a new perspective in energy-related fields. In recent years, cobalt-based analogs with diagnostic facilities have been introduced due to their electronic structures, tunable d band structures, and tailorable active sites. This perspective also elucidates the present issues, promising ideas, and future forecasts for cobalt-based catalysts. The critical aspects of cobalt-based catalysts and the numerous opportunities, as discussed at the end, can possibly enrich the sustainable energy field.

Three-Dimensional Transition Metal Phosphide Heteronanorods for Efficient Overall Water Splitting

The development of low-cost electrocatalysts with excellent activity and durability for both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER) poses a huge challenge in water splitting. In this study, a simple and scalable strategy is proposed to fabricate 3 D heteronanorods on nickel foam, in which nickel molybdenum phosphide nanorods are covered with cobalt iron phosphide (P-NM-CF HNRs). As a result of the rational design, the P-NM-CF HNRs have a large surface area, tightly connected interfaces, optimized electronic structures, and synergy between the metal atoms. Accordingly, the P-NM-CF HNRs exhibit a remarkably high catalytic activity for the OER under alkaline conditions and wide-pH HER. For overall water splitting, the catalyst only requires a voltage of 1.53 V to reach a current density of 10 mA cm^-2 in 1 m KOH with prominent stability, and the activity is not degraded after stability testing for 36 h. This new strategy can inspire the design of durable nonprecious-metal catalysts for large-scale industrial water splitting.

Plasma-Assisted Controllable Doping of Nitrogen into MoS2 Nanosheets as Efficient Nanozymes with Enhanced Peroxidase-Like Catalysis Activity

Heteroatom doping is one of the effective ways to improve the catalytic performances of nanozymes. In the present work, the plasma-assisted controllable doping of nitrogen (N) into MoS₂ nanosheets has been initially proposed, resulting in efficient nanozymes. The so-obtained nanozymes were characterized separately by TEM, XRD, XPS, and FTIR. It was discovered that the resulting N-doped MoS₂ nanosheets could present dramatically enhanced peroxidase-like catalytic activities depending on the plasma treatment time. Particularly, that with the 2-min treatment could display the highest catalytic activity, which is over 3-fold higher than that of pristine MoS₂, that was also demonstrated by the kinetics studies. Herein, the N₂ plasma treatment could facilitate the N elements to be doped covalently into MoS₂ nanosheets to achieve the increased surface wettability and affinity of nanozymes for the improved access of the electrons and substrates of catalytic reactions. More importantly, the covalent doping of N elements into MoS₂ nanosheets with a lower Fermi level, as evidenced by the DFT analysis, could facilitate the promoted electron transferring, resulting in the enhanced catalysis of N-doped MoS₂ nanozymes, in addition to the high catalytic stability in water. Such a controllable plasma treatment strategy may open a new door toward the large-scale applications for doping heteroatoms into various nanozymes with improved catalysis performances.

Synthesis and characterization of vanadium-doped Mo(O,S)2 oxysulfide for efficient photocatalytic degradation of organic dyes

We developed simple and low cost synthesis methods at low temperature to synthesize V-doped Mo(O,S)₂ for the photocatalytic degradation of dyes.

Cobalt oxide nanoparticle-decorated reduced graphene oxide (Co3O4–rGO): active and sustainable nanoelectrodes for water oxidation reaction

Herein, cobalt oxide (Co₃O₄)-decorated reduced graphene oxide (rGO)-based nanoelectrodes were fabricated by the chemical reduction method for electrocatalytic water oxidation reactions.