Primary Amine-Functionalized Mesoporous Phenolic Resin-Supported Palladium Nanoparticles as an Effective and Stable Catalyst for Water-Medium Suzuki-Miyaura Coupling Reactions

Bimetallic (AuAg, AuPd and AgPd) nanoparticles supported on cellulose-based hydrogel for reusable catalysis

Biopolymer-derived hydrogels with low-cost and sustainable features have been considered as fascinating supported materials for metal nanoparticles. Cellulose, as the most abundant biopolymer, is a renewable raw material to prepare biopolymer-derived hydrogels for catalysis. Here, a cellulose-based hydrogel is designed to load bimetallic (AuAg, AuPd and AgPd) nanoparticles. 4-Nitrophenol reduction and Suzuki-Miyaura coupling reactions are selected to evaluate and compare the catalytic performance of the resulting bimetallic nanoparticle-loaded cellulose-based composite hydrogels. The bimetallic nanocomposite hydrogels are easy to be recycled over 10 times during the catalytic experiments and possess good applicability and generality for various substrates. The catalytic activity of bimetallic nanocomposite hydrogels was compared with recent literatures. In addition, the possible catalytic mechanism is also proposed. This work is expected to give a new insight for designing and preparing bimetallic nanoparticle-based cellulose hydrogels and proves its applicability and prospect in the catalytic field.

Metal-Micelle Interaction Leading to Spontaneous Formation of Ligand-Free Palladium(0) Nanoparticles: Highly Efficient Catalysis Enabling Biaryl Ketone Formation from Carboxylic Acid Derivatives

A novel strategy has been developed to spontaneously form ligand-free Pd(0) nanoparticles (NPs) from water- and air-sensitive Pd₂dba₃ in water. These NPs are thoroughly characterized by IR, NMR, and mass spectrometry, revealing that the metal-micelle binding plays a critical role in their stability and activity. High-resolution transmission electron microscopy supported the ultrasmall nature of NPs, whereas X-ray photoelectron spectroscopy analysis confirmed the zero-oxidation state of Pd. The shielding effect of micelles and enhanced stability of NPs enabled fast cross-couplings of water-sensitive triazine adducts of carboxylic acid to form nonsymmetrical biaryl ketones. These naturally formed NPs are more efficient than new synthetic NPs formed under a hydrogen atmosphere and traditional NPs formed using the air-sensitive Grignard reagent as a reductant. The activity of naturally formed NPs is compared with that of synthetic NPs over 34 substrates, revealing that naturally formed NPs are much more efficient than synthetic NPs.

Proof of Concept: Interface of Recyclable Organogels with Embedded Palladium Nanoparticles Catalyzing Suzuki-Miyaura Coupling in Water at Room Temperature

A sustainable approach for C-C cross-coupling reaction at room temperature in water has been developed to avoid tedious Pd separation, reduce the carbon footprint, and save energy. Another important aspect is the catalyst recycling and easy product separation. α,γ-Hybrid peptides were designed to selectively use as a ligand for C-C cross-coupling catalysts as well as to form organogels. The peptides form antiparallel sheet-like structures in the solid state. The peptide containing m-aminobenzoic acid, glycine, and dimethylamine forms a whitish gel in toluene, and co-gelation with Pd(OAc)2 results in light brown gel, which acts as a biphasic catalyst for Suzuki-Miyaura cross-coupling at room temperature in water by mild shaking. The organic-inorganic hybrid gel was characterized by rheology, field-emission scanning electron microscopy, transmission electron microscopy, and energy-dispersive X-ray analyses. On completion of the cross-coupling reaction, the basic aqueous layer (containing products) above the gel can be simply decanted and the intact organic-inorganic hybrid gel can be recycled by topping-up fresh reactants multiple times. The reaction permitted a range of different substitution patterns for aryl and heterocyclic halides with acid or phenol functional groups. Both electron-donating- and electron-withdrawing-substituted substrates exhibited good results for this transformation. The findings inspire toward a holistic green technology for Suzuki-Miyaura coupling reaction and an innovative avenue for catalyst recycling and product isolation.

Highly Dispersed Pd Clusters Anchored on Nanoporous Cellulose Microspheres as a Highly Efficient Catalyst for the Suzuki Coupling Reaction

With the depletion of nonrenewable resources such as oil/coal/gas, more and more research studies began to focus on the high-value utilization of residual biomass resources. Herein, for the first time, honeycomb nanoporous microspheres fabricated from renewable biomass resources of cellulose were used as a carrier to fabricate a highly dispersed palladium (Pd) nanocatalyst. Various physicochemical characterizations presented convincing pieces of evidence for the good dispersion of Pd clusters with a mean diameter of 1.6 nm. As the carrier, cellulose microspheres with an interconnected nanoporous structure contributed to the adhesion and dispersion of Pd particles, and their rich hydroxyl groups could fix the Pd particles. Importantly, the cellulose matrix could in situ induce the formation of metallic Pd(0) during calcination without a reductant. The cellulose/Pd catalyst was applied to the Suzuki coupling reaction, which exhibited promising catalytic activity compared to commercial Pd/C and unsupported homogeneous Pd(OAc)₂ catalysts, as well as good stability. The utilization of the residual biomass resource to build catalyst materials would be important for the sustainable chemistry.

Pd Nanoparticles Stabilized on the Cross-Linked Melamine-Based SBA-15 as a Catalyst for the Mizoroki–Heck Reaction

Mesoporous SBA-15 silicate with a high surface area was prepared by a hydrothermal method, successively modified by organic melamine ligands and then used for deposition of Pd nanoparticles onto it. The synthesized materials were characterized with infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), nitrogen physisorption, scanning electron microscopy (SEM) coupled with energy dispersive X-ray analysis (EDX), transmission electron microscopy (TEM), nuclear magnetic resonance (NMR) and inductively coupled plasma (ICP-OES). The catalyst was effectively used in the Mizoroki–Heck coupling reaction of various reactants in the presence of an organic base giving the desired products in a short reaction time and with small catalysts loadings. The reaction parameters such as the base type, amounts of catalyst, solvents, and the temperature were optimized. The catalyst was easily recovered and reused at least seven times without significant activity losses.

Graphic Abstract

Suzuki–Miyaura cross coupling reaction: recent advancements in catalysis and organic synthesis

Suzuki–Miyaura cross coupling reaction (SMCR) – A milestone in the synthesis of C–C coupled compounds.

Porous Organic Polymers Containing Active Metal Centers for Suzuki-Miyaura Heterocoupling Reactions

A new generation of confined palladium(II) catalysts covalently attached inside of porous organic polymers (POPs) has been attained. The synthetic approach employed was straightforward, and there was no prerequisite for making any modification of the precursor polymer. First, POP-based catalytic supports were obtained by reacting one symmetric trifunctional aromatic monomer (1,3,5-triphenylbenzene) with two ketones having electron-withdrawing groups (4,5-diazafluoren-9-one, DAFO, and isatin) in superacidic media. The homopolymers and copolymers were made using stoichiometric ratios between the functional groups, and they were obtained with quantitative yields after the optimization of reaction conditions. Moreover, the number of chelating groups (bipyridine moieties) available to bind Pd(II) ions to the catalyst supports was modified using different DAFO/isatin ratios. The resulting amorphous polymers and copolymers showed high thermal stability, above 500 °C, and moderate-high specific surface areas (from 760 to 935 m² g^-1), with high microporosity contribution (from 64 to 77%). Next, POP-supported Pd(II) catalysts were obtained by simple immersion of the catalyst supports in a palladium(II) acetate solution, observing that the metal content was similar to that theoretically expected according to the amount of bipyridine groups present. The catalytic activity of these heterogeneous catalysts was explored for the synthesis of biphenyl and terphenyl compounds, via the Suzuki-Miyaura cross-coupling reaction using a green solvent (ethanol/water), low palladium loads, and aerobic conditions. The findings showed excellent catalytic activity with quantitative product yields. Additionally, the recyclability of the catalysts, by simply washing it with ethanol, was excellent, with a sp²-sp² coupling yield higher than 95% after five cycles of use. Finally, the feasibility of these catalysts to be employed in tangible organic reactions was assessed. Thus, the synthesis of a bulky compound, 4,4'-dimethoxy-5'-tert-butyl-m-terphenylene, which is a precursor of a thermal rearrangement monomer, was scaled-up to 2 g, with high conversion and 96% yield of the pure product.

Exploring the Fundamental Roles of Functionalized Ligands in Platinum@Metal-Organic Framework Catalysts

The metal nodes, functionalized ligands, and uniform channels of metal-organic frameworks (MOFs) are typically utilized to regulate the catalytic properties of metal nanoparticles (MNPs). However, though the ligand functionalization could impact the properties of the metal nodes and channels, which might further regulate the catalytic activity and selectivity of MNPs, related research in the design of MNP/MOF catalysts was usually neglected. Herein, we synthesized a series of Pt@UiO-66 composites (Pt@UiO-66-NH₂, Pt@UiO-66-SO₃H, and Pt@UiO-66) with slightly different organic ligands, which enhanced steric hindrance and contributed to multipathway electron transfer in selective hydrogenation of linear citronellal. The selectivity toward citronellol was gradually improved along with the increased size of functional groups (hydrogen, amino groups, and sulfo groups) on organic ligands, which enhanced steric hindrance provided by channels. In addition, the X-ray photoelectron spectroscopy measurements also revealed that the electronic state of Pt NPs was regulated through multipathway electron transfer from Pt NPs to metal nodes, between organic ligands and Pt NPs/metal nodes. Our research proved that the ligand functionalization altered physiochemical properties of the channels and metal nodes, further together managing the catalytic performance of Pt NPs through enhanced steric hindrance and multi-pathway electron transfer.

One pot green synthesis of m-aminophenol-urea-glyoxal resin as pipette tip solid-phase extraction adsorbent for simultaneous determination of four plant hormones in watermelon juice

Plant hormones (PHs) are a type of pesticide that can potentially affect human health. Therefore, their quantitative detection is particularly important. In this study, a green and economic method for the simultaneous extraction and determination of four PHs, namely thidiazuron, forchlorfenuron, 1-naphthylacetic acid, and 2-naphthoxyacetic acid, in watermelon juice was developed by using m-aminophenol-urea-glyoxal resin as the adsorbent for pipette tip solid phase extraction (PT-SPE) coupled with liquid chromatography. The resin was synthesized via a simple (one pot hydrothermal synthesis) and green (ethanol as the solvent and glyoxal as crosslinking agent) process. The synthesized resin possesses multiple functional groups (hydroxyl, amino, and imino, among others), high adsorption capacity, larger specific surface area than the urea-glyoxal resin and m-aminophenol-glyoxal resin, and can be regenerated easily. The PT-SPE device is simple, cheap, and easy to obtain, and the adsorbent dosage is only 5.0 mg. The proposed method has a wide linear detection range, high recovery, good precision, and high sensitivity, and satisfies the measurement requirements for detecting trace levels of PHs in fruits and vegetables.

In Situ One-Step Synthesis of Platinum Nanoparticles Supported on Metal-Organic Frameworks as an Effective and Stable Catalyst for Selective Hydrogenation of 5-Hydroxymethylfurfural

A facile in situ one-step route for the preparation of platinum nanoparticles supported on metal-organic frameworks (MOFs) without adding stabilizing agents was developed. The obtained 10% Pt@MOF-T3 material possessed a large surface area and high crystallinity. Meanwhile, uniform and well-dispersed platinum nanoparticles were formed inside the cavities of MOFs, which could be attributed to the efficient complexation and stabilization effect derived from the dipyridyl groups. The as-synthesized 10% Pt@MOF-T3 sample showed high activity and selectivity in the hydrogenation of 5-hydroxymethylfurfural (HMF). This excellent catalytic performance could be attributed to the synergistic effects of well-dispersed platinum nanoparticles and electron donation offered by MOFs. Meanwhile, the presence of bipyridine ligands in the MOF framework avoided the irreversible adsorption of the hydrocarbon compounds, leading to the enhanced catalytic efficiency. Besides, it was easily recycled and reused at least five times, showing good recyclability.

A novel highly active and reusable carbon based platinum-ruthenium nanocatalyst for dimethylamine-borane dehydrogenation in water at room conditions

In this paper, we present platinum/ruthenium nanoparticles supported on Vulcan carbon (PtRu@VC) as a nanocatalyst for the dehydrogenation of dimethylamine-borane (DMAB) in aqueous solution under mild conditions. PtRu@VC nanocatalyst was fabricated using the alcohol-reduction techniques which is a facile and effective method. The prepared PtRu@VC nanocatalyst exhibited a good stabilization and an effective catalytic activity for hydrogen evolution from the DMAB dehydrogenation in water at room temperature. The composition of PtRu@VC nanocatalyst was investigated using different analytical techniques inductively coupled plasma optical emission spectroscopy (ICP-OES), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HR-TEM), powder X-ray diffraction (P-XRD) and X-ray photoelectron spectroscopy (XPS). A monodispersedPt/Ru metals distributions on VC (as supporting material) were revealed by TEM and HR-TEM analyses. The mean particle size of PtRu@VC nanocatalyst was found to be 3.15 ± 0.76 nm. XPS analysis for PtRu@VC nanocatalyst showed that almost Pt-Ru metals were found to be the metallic state. Catalytic experimental results showed that PtRu@VC nanocatalyst has a high catalytic activity with an excellent turn-over frequency (TOF_initial) value of 14926.2 h⁻¹ (248.77 min⁻¹) in the dehydrogenation of DMAB in water at room temperature. Additionally, in the paper, we report some different kinetic data obtained from different experimental parameters of temperature, catalyst and substrate concentrations conducted for DMAB dehydrogenation in water catalyzed with PtRu@VC nanocatalyst.

Preparation of a Pickering emulsion by modification of an amine-functionalized graphene oxide surface with organosilane: efficient catalyst for the Knoevenagel condensation of malononitrile with aldehydes at mild temperature

In this study, a series of Pickering emulsions for catalysis of Knoevenagel condensations of malononitrile with aldehydes were prepared by surface modification of amine-functionalized graphene oxide (GO-NH₂) with trimethoxymethylsilane (MTMS).