Molecularly Imprinted Phase-Change Microcapsule System for Bifunctional Applications in Waste Heat Recovery and Targeted Pollutant Removal

Cell-Penetrating Drug Carrier by Molecular Recognition of Sphingomyelin on Plasma Membranes

Plasma membranes not only maintain the intracellular microenvironment through their phospholipid bilayer but also eliminate exogenous compounds outside the cell membranes. Most drugs especially with high polarity are prevented from entering into cells to exert their effects. Therefore, it is of great significance to design effective drug carriers with a penetrating ability toward plasma membranes. In this study, a dual-templated MIP (dt-MIPs) carrier with controllable microstructure and high drug loading capacity was prepared using highly expressed sphingomyelin on the plasma membrane and tenofovir (TFV), a first-line drug for HIV and chronic hepatitis B, as template molecules. The drug release experiments performed in vitro under simulated physiological conditions demonstrated that sustained and stable adsorption of TFV on dt-MIPs was more than 80% over 50 h. By a combination of flow cytometry and confocal microscopy, dt-MIPs were found to have efficient cell permeability. Furthermore, mass-spectrometry-based intracellular pharmacokinetic studies demonstrated that TFV was delivered completely into cells within 30 min with the delivery of dt-MIPs. The study presented above suggested that dt-MIPs are expected to be alternative nanoscale drug carriers for enhanced drug permeability and controlled release.

Three-Dimensional Macroporous rGO-Aerogel-Based Composite Phase-Change Materials with High Thermal Storage Capacity and Enhanced Thermal Conductivity

Three-dimensional porous network encapsulation strategy is an effective means to obtain composite phase-change materials (PCMs) with high heat storage capacity and enhanced thermal conductivity. Herein, macroporous reduced graphene oxide (rGO) aerogels with adjustable pore size are prepared by the emulsion template method and hydrothermal reduction process. Further, the shape-stabilized rGO-aerogel-based composite PCMs are constructed after the combination of 3D porous rGO supports and paraffin wax (PW) through vacuum melting infiltration. By regulating the pore structure of the rGO aerogel network, the rGO-based composite PCMs achieve excellent energy storage properties with a phase-change enthalpy of 179.94 J/g for the loading amount of 95.61 wt% and an obvious enhancement in thermal conductivity of 0.412 W/m^-1·K^-1, which is 54.89% higher than pristine PW and enduring thermal cycling stability. The obtained macroporous rGO-aerogel-based composite PCMs with high thermal storage and heat transfer performance effectively broaden the application of PCMs in the field of thermal energy storage.

Performance of Nanocomposites of a Phase Change Material Formed by the Dispersion of MWCNT/TiO2 for Thermal Energy Storage Applications

Thermal energy storage technology is an important topic, as it enables renewable energy technology to be available 24/7 and under different weather conditions. Phase changing materials (PCM) are key players in thermal energy storage, being the most economic among those available with adjustable thermal properties. Paraffin wax (PW) is one of the best materials used in industrial processes to enhance thermal storage. However, the low thermal conductivity of PW prevents its thermal application. In this study, we successfully modified PW based on multi-walled carbon nanotubes (MWCNT) with different concentrations of TiO₂—3, 5 and 7 wt.%. The morphology of PCM and its relationship with the chemical structure and stability were characterized using scanning electron microscopy (SEM), Fourier transform infrared (FTIR) and Thermogravimetric analysis (TGA). As a result, the composites achieved a highest latent heat enthalpy of 176 J/g, in addition to enhanced thermal stability after 15 thermal cycles, and reliability, with a slight change in latent heat observed when using a differential scanning calorimeter (DSC). The thermal conductivity of the composites could significantly be enhanced by 100%. Compared to pure paraffin, the PCM composites developed in this study exhibited an excellent preference for thermal energy storage and possessed low cost, high reliability, and phase change properties.

Phase-Change Composites Composed of Silicone Rubber and Pa@SiO2@PDA Double-Shelled Microcapsules with Low Leakage Rate and Improved Mechanical Strength

A kind of silicone rubber (SR)/paraffin (Pa)@silicon dioxide (SiO₂)@polydopamine (PDA) phase-change composite was prepared in this work. The double-shelled Pa@SiO₂@PDA phase-change microcapsules were constructed by oxidative self-polymerization of dopamine (DA) in Tris-HCl buffer solution. The effect of the DA content on the properties of Pa@SiO₂@PDA microcapsules and SR/Pa@SiO₂@PDA composites was researched. Due to the protective effect of SiO₂, PDA layer, and SR matrix, the SR/Pa@SiO₂@PDA composites have good leak-proofing performance, and the leakage rate of SR/Pa@SiO₂@PDA-2 is as low as 0.45%. Phase-change enthalpies of the Pa@SiO₂@PDA microcapsules and SR/Pa@SiO₂@PDA composites are reduced slightly with increasing DA content. Meanwhile, the composites displayed improved mechanical strength. The tensile strength of SR/Pa@SiO₂@PDA-2 can be up to 0.560 MPa, which is 1.85 times higher than the tensile strength of pure SR/Pa@SiO₂ because the interface compatibility between Pa@SiO₂ microcapsules and SR is improved through hydrogen bonding between the abundant groups on the PDA surface and the matrix. Moreover, the rough surface of the PDA-modified microcapsules also enhances the interface interaction through physical "interlocking". The new kind of SR/Pa@SiO₂@PDA composite can be used for thermal management.

Fluorescent sensing system based on molecularly imprinted phase-change microcapsules and carbon quantum dots for high-efficient detection of tetracycline

Aiming at enhancing the detection efficiency and identification accuracy of tetracycline under a high-temperature condition, this study focuses on an innovative fluorescent sensing system (MIP@CQD-PCM) based on molecularly imprinted phase-change microcapsules along with the carbon quantum dots (CQDs) embedded in their shell. This system was fabricated by microencapsulating n-eicosane as a phase change material (PCM) core within a CQDs-embedded SiO₂ shell, followed by coating a tetracycline-templated molecularly imprinted polymer (MIP) layer onto the surface of the SiO₂ shell. The specific recognition sites to tetracycline molecules were finally achieved by removal of tetracycline template from the MIP layer. Comprehensive characterizations and investigations on the structure and performance of the fluorescent sensing system were given to confirm its successful fabrication in accordance to our design strategy. The resultant MIP@CQD-PCM exhibits a satisfactory thermal storage capacity and phase-change cycle stability for temperature regulation and thermal management applications under a phase-change enthalpy of over 162 J/g. Most of all, a typical fluorescence-quenching effect was obtained from the combination of the CQDs embedded in the SiO₂ shell and the tetracycline molecules adsorbed in the MIP layer. This makes the MIP@CQD-PCM achieve an enhanced capability for the fluorescence identification of tetracycline in a high-temperature environment through the in situ thermal management of its PCM core. The MIP@CQD-PCM also displays high selectivity and good reusability for tetracycline detection in industrial applications. This work provides a promising strategy for the design and development of fluorescent sensing systems with high recognition efficiency and identification accuracy in the detection of hazardous substances.

Magnetic imprinted nanoparticles with synergistic tailoring of covalent and non-covalent interactions for purification and detection of procyanidin B2

A synergistic imprinting strategy of covalent and non-covalent interactions is proposed to prepare magnetic molecularly imprinted polymers (DI-MMIPs) for highly selective separation of procyanidin B2 (PC) from grape seed samples. Dopamine and 3-amino-phenylboronic acid as cooperative functional monomers endow the imprinted sites with synergistic tailoring. Benefiting from the synergistic effect, the DI-MMIPs exhibit enhanced imprinting performance with high adsorption capacity (27.71 mg g^-1), fast kinetic equilibrium time (within 30 min), outstanding selectivity (IF = 5.8, SC > 3.2), and satisfactory regeneration ability. In addition, the DI-MMIPs possess good magnetism, uniform morphology with typical core-shell structure, and stable crystallization. Furthermore, the established DI-MMIPs coupled with HPLC-UV (~ 280 nm) method has a wide linearity range of 0.05-200 μg mL^-1 with correlation coefficient of 0.9997, high recoveries (> 93.1%) with RSDs from 2.9 to 5.5%, and low LOD (0.0008 μg mL^-1). Consequently, this work provides an effective and easily tailored way to fabricate magnetic imprinted nanomaterials with both rapid recognition rate and high selectivity and thus holds great promise to realize the extraction and detection of PC from real samples.

Multielement Synergetic Effect of Boron Nitride and Multiwalled Carbon Nanotubes for the Fabrication of Novel Shape-Stabilized Phase-Change Composites with Enhanced Thermal Conductivity

Shape-stabilized phase-change composites (SSPCCs) have been widely applied for thermal energy storage and thermal management because of their excellent properties. To further improve their thermal conductivity and thermal cycling stability, we successfully designed and synthesized a series of SSPCCs with three-dimensional (3D) thermally conductive networks by exploiting the synergistic effect between one-dimensional (1D) carbon nanotubes (CNTs) and two-dimensional (2D) hexagonal boron nitride (h-BN). The interconnected thermally conductive network composed of h-BN and multiwalled carbon nanotubes (MWCNTs) enhanced the SSPCC performance. The micromorphologies of the prepared SSPCCs revealed that well-dispersed MWCNTs, hydroxylated h-BN, and polyethylene glycol (PEG) molecular chains effectively bonded into a 3D cross-linking structure of the SSPCCs. Moreover, the chemical and crystalline structural and thermal properties and thermal cycling stability of the novel SSPCCs were systematically investigated by various characterization techniques. The presence of a 3D thermally conductive network in the as-synthesized SSPCCs evidently improved the shape stability, phase-change behavior, and thermal stability. Benefiting from the 3D nanostructural uniqueness of SSPCCs, the thermal conductivity of SSPCC-2 was up to 1.15 W m^-1 K^-1, which represented a significant enhancement of 239.7% compared with that of pure PEG. Meanwhile, the efficient synergistic effect of h-BN and MWCNTs remarkably enhanced the heat-transfer rate of the SSPCCs. These results demonstrate that the prepared SSPCCs have potential for applications in thermal energy storage and thermal management systems. This study opens a new avenue toward the development of SSPCCs with good comprehensive properties.

Sensitive and selective detection of glycoprotein based on dual-signal and dual-recognition electrochemical sensing platform

Glycoproteins play extraordinary roles in biology and clinic. The specifically sensitive detection of glycoproteins by electrochemical methods is still a challenging task due to their poor electro-activity and sensitive nature to environment. In this work, ovalbumin (OVA), a model glycoprotein, was sensitively detected by a molecularly imprinted polymer (MIP) based electrochemical sensor, which was prepared by electropolymerizing 3-thiophene boric acid in the presence of OVA. Due to boronate affinity, the rebound OVA interacted with ferrocene boric acid (Fc-BA) to construct a sandwich structural sensing platform. Dual-recognition elements, imprinted effect and the boronate affinity, enabled the sensor to recognize OVA from other proteins. The rebinding of OVA caused the current changes of thionine and Fc-BA, which were combined as a dual-signal for OVA sensitive detection with a low limit of detection of 0.82 pg/mL (S/N = 3). The good performances of sensor indicated its potential applications in clinical diagnosis and other related fields.

Temperature-humidity dual regulation of a single-core-double-shell microcapsule fabricated by electrostatic-assembly and chemical precipitation

Humidity and temperature control materials have attracted increasing attention due to their energy saving and intelligent regulation of human comfort in the field of interior building and clothing. Phase change microcapsules have been widely used, however, most of which focus on temperature regulation without humidity control. In this work, we report a novel temperature–humidity dual regulation microcapsule with single-core–double-shell structure. FT-IR and XRD measurements confirmed that the shell materials were successfully fabricated on the paraffin core via electrostatic-assembly and the subsequent chemical precipitation method. SEM, TEM and optical microscope photos showed that the microcapsules were spherical morphology with layer-by-layer shells at a diameter around 2–5 μm. The SiO₂ shell was aggregated from nano-sized particles and formed a loose and porous micro-structure, supported by the result of N₂ adsorption–desorption isotherms. In addition, the synergistic effect of hydrophilic and porous loose (chitosan/GO/chitosan)–SiO₂ double shells endowed the microcapsules with humidity regulation. The constructed microcapsules showed temperature regulation behavior due to its phase change performance of paraffin and good thermal durability after 10 thermal cycles. They also showed stable humidity regulation performance after repeated adsorption/desorption. The simulation experiments of temperature and humidity regulation indicated that the microcapsule could keep the temperature and humidity in a stable range. The as-prepared microcapsules have outstanding temperature and humidity regulation properties, showing an application prospects in energy-saving fields.

A single-core–double-shell microcapsule with temperature–humidity dual regulation was achieved by artfully designing of core and shell to realize the multi-functional and multi-factors regulation.