Surface Reconstruction of La0.8Sr0.2Co0.8Fe0.2O3-δ for Superimposed OER Performance

Synergistic Effects in LaNiO3 Perovskites between Nickel and Iron Heterostructures for Improving Durability in Oxygen Evolution Reaction for AEMWE

Perovskite materials that aren't stable during the oxygen evolution reaction (OER) are unsuitable for anion-exchange membrane water electrolyzers (AEMWE). But through manipulating their electronic structures, their performance can further increase. Among the first-row transition metals, nickel and iron are widely recognized as prominent electrocatalysts; thus, the researchers are looking into how combining them can improve the OER. Recent research has actively explored the design and study of heterostructures in this field, showcasing the dynamic exploration of innovative catalyst configurations. In this study, a heterostructure is used to manipulate the electronic structure of LaNiO3 (LNO) to improve both OER properties and durability. Through adsorbing iron onto the LNO (LNO@Fe) as γ iron oxyhydroxide (γ-FeOOH), the binding energy of nickel in the LNO exhibited negative shifts, inferring nickel movement toward the metallic state. Consequently, the electrochemical properties of LNO@Fe are further improved. LNO@Fe showed excellent performance (1.98 A cm-2, 1 m KOH, 50 °C at 1.85 V) with 84.1% cell efficiency in AEMWE single cells, demonstrating great improvement relative to LNO. The degradation for the 850 h durability analysis of LNO@Fe is ≈68 mV kh-1, which is ≈58 times less than that of LNO.

Perovskite Oxides Toward Oxygen Evolution Reaction: Intellectual Design Strategies, Properties and Perspectives

Developing electrochemical energy storage and conversion devices (e.g., water splitting, regenerative fuel cells and rechargeable metal-air batteries) driven by intermittent renewable energy sources holds a great potential to facilitate global energy transition and alleviate the associated environmental issues. However, the involved kinetically sluggish oxygen evolution reaction (OER) severely limits the entire reaction efficiency, thus designing high-performance materials toward efficient OER is of prime significance to remove this obstacle. Among various materials, cost-effective perovskite oxides have drawn particular attention due to their desirable catalytic activity, excellent stability and large reserves. To date, substantial efforts have been dedicated with varying degrees of success to promoting OER on perovskite oxides, which have generated multiple reviews from various perspectives, e.g., electronic structure modulation and heteroatom doping and various applications. Nonetheless, the reviews that comprehensively and systematically focus on the latest intellectual design strategies of perovskite oxides toward efficient OER are quite limited. To bridge the gap, this review thus emphatically concentrates on this very topic with broader coverages, more comparative discussions and deeper insights into the synthetic modulation, doping, surface engineering, structure mutation and hybrids. More specifically, this review elucidates, in details, the underlying causality between the being-tuned physiochemical properties [e.g., electronic structure, metal-oxygen (M-O) bonding configuration, adsorption capacity of oxygenated species and electrical conductivity] of the intellectually designed perovskite oxides and the resulting OER performances, coupled with perspectives and potential challenges on future research. It is our sincere hope for this review to provide the scientific community with more insights for developing advanced perovskite oxides with high OER catalytic efficiency and further stimulate more exciting applications.

Graphical Abstract

NiFe codoping-regulated amorphous/crystalline heterostructured Co-based hydroxides/tungstate with rich oxygen vacancies for efficient water oxidation catalysis

Oxygen evolution reaction (OER) is a crucial half-reaction in water splitting, generating hydrogen for sustainable development, but it is often subject to sluggish kinetics. Abundant transition metal-based OER electrocatalysts have been utilized to expedite the process. However, traditional amorphous catalysts suffer from low conductivity, while the activity of crystalline catalysts is also unsatisfactory. Herein, an amorphous/crystalline heterostructured Co-based hydroxide/tungstate was meticulously constructed and further tailored using a NiFe codoping method (NiFeCoW). Following NiFe codoping, the electronic structure had been modulated, subsequently altering the adsorption toward intermediates. From the electrochemical measurements, the NiFeCoW catalyst demonstrated superior electrocatalytic activity for OER in alkaline media, with a minimal overpotential of 297 mV at 10 mA cm-2 and a cell voltage of 1.57 V for water splitting. This study provides valuable guidance for regulating the amorphous/crystalline heterophase in catalysts through bimetallic modulating engineering.

Tailoring the d-band electronic structure of deficient LaMn0.3Co0.7O3-δ perovskite nanofibers for boosting oxygen electrocatalysis in Zn-Air batteries

The development and design of efficient bifunctional electrocatalysts towards oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are crucial for rechargeable Zinc-air batteries (ZABs). Optimizing the d-band structure of active metal center in perovskite oxides is an effective method to enhance ORR/OER activity by accelerating the rate-determining step. Herein, we report a deficient method to optimize the d-band structure of Co ions in LaMn0.3Co0.7O3-δ (LMCO-2) perovskite nanofibers, which regulates the mutual effect between B-site Co ions and reactive oxygen intermediates. It is proved by experiment and theoretical calculation that the d-band center (Md) of transition metal ions in LMCO-2 is moved up and the electron filling number of eg orbital in B site is 1.01, thus leading to the reduction of Gibbs free energy required for ORR rate-determining step (OH*→H2O*) to 0.22 eV and promoting reaction proceeds. In this manner, LMCO-2 showed good bifunctional oxygen electrocatalytic activity, with a half-wave potential of 0.71 V vs. RHE. Furthermore, the high specific capacity of 811.54 mAh g-1 and power density of 326.56 mW cm-2 were obtained by using LMCO-2 as the cathode catalyst for ZABs. This study proved the feasibility of d-band structure regulation to enhance the electrocatalytic activity of perovskite oxides.

Recent Progress on Phase Engineering of Nanomaterials

As a key structural parameter, phase depicts the arrangement of atoms in materials. Normally, a nanomaterial exists in its thermodynamically stable crystal phase. With the development of nanotechnology, nanomaterials with unconventional crystal phases, which rarely exist in their bulk counterparts, or amorphous phase have been prepared using carefully controlled reaction conditions. Together these methods are beginning to enable phase engineering of nanomaterials (PEN), i.e., the synthesis of nanomaterials with unconventional phases and the transformation between different phases, to obtain desired properties and functions. This Review summarizes the research progress in the field of PEN. First, we present representative strategies for the direct synthesis of unconventional phases and modulation of phase transformation in diverse kinds of nanomaterials. We cover the synthesis of nanomaterials ranging from metal nanostructures such as Au, Ag, Cu, Pd, and Ru, and their alloys; metal oxides, borides, and carbides; to transition metal dichalcogenides (TMDs) and 2D layered materials. We review synthesis and growth methods ranging from wet-chemical reduction and seed-mediated epitaxial growth to chemical vapor deposition (CVD), high pressure phase transformation, and electron and ion-beam irradiation. After that, we summarize the significant influence of phase on the various properties of unconventional-phase nanomaterials. We also discuss the potential applications of the developed unconventional-phase nanomaterials in different areas including catalysis, electrochemical energy storage (batteries and supercapacitors), solar cells, optoelectronics, and sensing. Finally, we discuss existing challenges and future research directions in PEN.

Magnetic Field-Enhanced Oxygen Evolution Reaction via the Tuneability of Spin Polarization in a Half-Metal Catalyst

The magnetic field response of an electrochemistry process, such as the oxygen evolution reaction (OER), provides not only a strategy for enhanced catalytic activity by applying an external field but also a platform for revealing the functionality of the multiple degrees of freedom of the catalyst. However, the mechanism of the magnetic field tuneable OER is controversial. The strong correlation between the d and p orbitals of transition metal and oxygen still puzzles the dominant role of spin in an OER process. Here in this study, we have employed the manganite La_0.7Sr_0.2Ca_0.1MnO₃ as the ferromagnetic OER catalyst, which has a ferromagnetic/paramagnetic transition (T_C) around the room temperature. It is found that the overpotential can be reduced by ∼18% after applying a 5 kOe magnetic field. Furthermore, this magnetic field can trigger a further improvement of the OER performance, and it demonstrates a strong temperature dependence which is incongruent with its magnetoresistive behavior. So our experiments suggest that the observed magnetic response originates dominantly from the triplet state of the O₂, where the spin-polarized d and oxygen p orbitals lower the Gibbs free energy for every reaction step in OER. This study offers experimental evidence on comprehending the spin degree in the OER process, meanwhile benefiting the further design and engineering of the promising magnetic electrochemistry catalysts.

Cationic Defect Engineering in Perovskite La2CoMnO6 for Enhanced Electrocatalytic Oxygen Evolution

The urgent need to promote the development of sustainable energy conversion requires exploration of highly efficient oxygen evolution reaction (OER) electrocatalysts. Defect engineering is a promising approach to address the inherent low electrical conductivity of metal oxides and limited reaction sites, for use in clean air applications and as electrochemical energy-storage electrocatalysts. In this article, oxygen defects are introduced into La₂CoMnO_6-δ perovskite oxides through the A-site cation defect strategy. By tuning the content of the A-site cation, oxygen defect concentration and corresponding electrochemical OER performance have been greatly improved. As a result, the defective La_1.8CoMnO_6-δ (L_1.8CMO) catalyst exhibits exceptional OER activity with an overpotential of 350 mV at 10 mA cm^-2, approximately 120 mV lower than that of the pristine perovskite. This enhancement can be attributed to the increase in surface oxygen vacancies, optimized e_g occupation of transition metal at the B-site, and enlarged Brunauer-Emmett-Teller surface area. The reported strategy facilitates the development of novel defect-mediated perovskites in electrocatalysis.

Spherical Fe7S8@rGO nanoflowers as electrodes with high electrocatalytic performance in dye-sensitized solar cells

Dye-sensitized solar cells (DSSCs) can directly convert solar energy into electricity, and have aroused great research interest from researchers. Here, the spherical Fe₇S₈@rGO nanocomposites were expediently fabricated by facile methods, and applied in DSSCs as counter electrodes (CEs). The morphological features show the porous structure of Fe₇S₈@rGO, and it is beneficial to enhance the permeability of ions. Reduced graphene oxide (rGO) has a large specific surface area and good electrical conductivity, shortening the electron transfer path. The presence of rGO promotes the catalytic reduction of I₃^- ions to I^- ions and reduces the charge transfer resistance (R_ct). The experimental findings show that the power conversion efficiency (PCE) of Fe₇S₈@rGO as CEs for DSSCs can reach 8.40% (20 wt% for rGO), significantly higher than Fe₇S₈ (7.60%) and Pt (7.69%). Therefore, Fe₇S₈@rGO nanocomposite is expected to be an efficient and cost-effective CE material for DSSCs.

Advances in Spin Catalysts for Oxygen Evolution and Reduction Reactions

Searching for high effective catalysts has been an endless effort to improve the efficiency of green energy harvesting and degradation of pollutants. In the past decades, tremendous strategies are explored to achieve high effective catalysts, and various theoretical understandings are proposed for the improved activity. As the catalytic reaction occurs at the surface or edge, the unsaturated ions may lead to the fluctuation of spin. Meanwhile, transition metals in catalysts have diverse spin states and may yield the spin effects. Therefore, the role of spin or magnetic moment should be carefully examined. In this review, the recent development of spin catalysts is discussed to give an insightful view on the origins for the improved catalytic activity. First, a brief introduction on the applications and advances in spin-related catalytic phenomena, is given, and then the fundamental principles of spin catalysts and magnetic fields-radical reactions are introduced in the second part. The spin-related catalytic performance reported in oxygen evolution/reduction reaction (OER/ORR) is systematically discussed in the third part, and general rules are summarized accordingly. Finally, the challenges and perspectives are given. This review may provide an insightful understanding of the microscopic mechanisms of catalytic phenomena and guide the design of spin-related catalysts.

Ab initio study of changing the oxygen reduction activity of Co-Fe-based perovskites by tuning the B-site composition

Perovskite oxides are promising low-cost and stable alternative electrocatalysts for the oxygen reduction reaction (ORR), relative to the precious metal-based electrocatalysts. Despite the experimental research on substituting various transition metals into the B-site of perovskite catalysts to improve the ORR performance, the detailed ORR mechanism due to the substitution process is rarely studied. In this paper, the ORR activity of La_0.5Sr_0.5Co_xFe_1-xO₃ perovskites (x = 0, 0.25, 0.5, 0.75, and 1) is studied by density functional theory (DFT). The ORR mechanism in alkaline solution is theoretically examined as a function of the Co/Fe composition at different potentials. The substitution of Co for Fe at the B-site of the perovskites dramatically changes the theoretical overpotential and enhances the activity. The HOO* formation is the potential-determining step for all the Co/Fe compositions. In comparison with the other compositions, the Co_0.5/Fe_0.5 composition exhibits the lowest overpotential and bonding with the reaction intermediates moderately. Furthermore, the oxygen binding energy is correlated with the bulk oxygen p-band center relative to the Fermi level. Among all the Co/Fe compositions, the Co_0.5/Fe_0.5 composition shows neither too low nor too high oxygen p-band center value. These results provide deep insights into the ORR mechanism on B-site substituted perovskites and guidelines for the design of cost-effective and Pt-free electrocatalysts for oxygen reduction.

Perovskite-based electrocatalysts for oxygen evolution reaction in alkaline media: A mini review

Water electrolysis is one of the attractive technologies for producing clean and sustainable hydrogen fuels with high purity. Among the various kinds of water electrolysis systems, anion exchange membrane water electrolysis has received much attention by combining the advantages of alkaline water electrolysis and proton exchange membrane water electrolysis. However, the sluggish kinetics of the oxygen evolution reaction, which is based on multiple and complex reaction mechanisms, is regarded as a major obstacle for the development of high-efficiency water electrolysis. Therefore, the development of high-performance oxygen evolution reaction electrocatalysts is a prerequisite for the commercialization and wide application of water electrolysis systems. This mini review highlights the current progress of representative oxygen evolution reaction electrocatalysts that are based on a perovskite structure in alkaline media. We first summarize the research status of various kinds of perovskite-based oxygen evolution reaction electrocatalysts, reaction mechanisms and activity descriptors. Finally, the challenges facing the development of perovskite-based oxygen evolution reaction electrocatalysts and a perspective on their future are discussed.

Rapidly reconstructing the active surface of cobalt-based perovskites for alkaline seawater splitting

As a potential oxygen evolution reaction (OER) catalyst, Co-based perovskites have received intensive attention. However, Sr readily accumulates on their surface, and makes them inert toward the OER. Herein, we propose a simple but versatile electrochemical reduction method to reconstruct the active surface of Co-based perovskites within a few seconds. By this method, Sr rapidly precipitates from Co-based perovskites, accompanied by the introduction of Sr and oxygen vacancies. After reconstruction, the electrochemical active surface areas of Co-based perovskites greatly increase, and the OER overpotential of the optimized SrNb_0.1Co_0.7Fe_0.2O_3-δ (ER-SNCF-20s) reaches 278 mV at 10 mA cm^-2. This can be explained by the decrease of overpotentials at the rate-determining step. Using ER-SNCF-20s, the splitting voltage of alkaline natural seawater can reach 1.56 V at 10 mA cm^-2, and remains steady for 300 h. This effort offers a feasible method for reconstructing the active surface of Co-based perovskites.

A yolk-shell structure construction for metal-organic frameworks toward an enhanced electrochemical water splitting catalysis

NiFe-based transition metal catalysts are widely used in electrocatalysis, especially in the field of water splitting, due to their excellent electrochemical performance. Herein, a simple method was designed to synthesize a Ni MOF based on nickel foam and it was modified with Fe. After the introduction of Fe, the resulting material exhibits an obvious yolk-shell structure, which greatly increases the specific surface area and facilitates the construction of active sites. At the same time, the synergy between Ni and Fe is conducive to optimizing the electronic structure and effectively improving the poor stability of the MOF. As a result, the synthesized Ni MOF-Fe-2 only needs an overpotential of 229 mV to achieve the OER at a current density of 10 mA cm^-2, which is better than most reported transition metal-based electrocatalysts. To our surprise, it showed extraordinary stability under the voltage used for water splitting.

Modulating anion defect in La0.6Sr0.4Co0.8Fe0.2O3-δ for enhanced catalytic performance on peroxymonosulfate activation: Importance of hydrated electrons and metal-oxygen covalency

Perovskite oxides are promising catalysts in peroxymonosulfate (PMS) activation for wastewater treatment, attributed to their flexible structures. In this study, halogen anion (F^- or Cl^-) was doped in La_0.6Sr_0.4Co_0.8Fe_0.2O_3-δ (LSCF) for PMS activation, showing that appropriate anion doping enhances the catalytic performances. La_0.6Sr_0.4Co_0.8Fe_0.2O_2.75-δCl_0.25 (LSCFCl_0.25) exhibits a superior catalytic activity to pristine LSCF and La_0.6Sr_0.4Co_0.8Fe_0.2O_2.75-δF_0.25 (LSCFF_0.25), attributed to the strong surface acidity, sufficient oxygen vacancies, and improved B-site metal-oxygen bonding. The rich acidic sites favor PMS adsorption on the catalyst surface. The sufficient hydrated electrons (e_aq^-) in the oxygen vacancies participated in the generation of free radicals (SO₄^•- and O₂^•-) and singlet oxygen (¹O₂). The enlarged B-site metal-oxygen covalency could boost the electron transfer between PMS and Co^(III)/Fe^(III), and thus accelerate the redox reaction. SO₄^•- and ¹O₂ are the dominating species for the degradation. This study deepens the catalytic mechanism and uncovers the active sites of perovskite catalysts for PMS activation, providing an inspiring modification strategy to improve the catalytic performances.

Recent Advances in Perovskite Catalysts for Efficient Overall Water Splitting

Hydrogen is considered a promising clean energy vector with the features of high energy capacity and zero-carbon emission. Water splitting is an environment-friendly and effective route for producing high-purity hydrogen, which contains two important half-cell reactions, namely, the anodic oxygen evolution reaction (OER) and the cathodic hydrogen evolution reaction (HER). At the heart of water splitting is high-performance electrocatalysts that efficiently improve the rate and selectivity of key chemical reactions. Recently, perovskite oxides have emerged as promising candidates for efficient water splitting electrocatalysts owing to their low cost, high electrochemical stability, and compositional and structural flexibility allowing for the achievement of high intrinsic electrocatalytic activity. In this review, we summarize the present research progress in the design, development, and application of perovskite oxides for electrocatalytic water splitting. The emphasis is on the innovative synthesis strategies and a deeper understanding of structure–activity relationships through a combination of systematic characterization and theoretical research. Finally, the main challenges and prospects for the further development of more efficient electrocatalysts based on perovskite oxides are proposed. It is expected to give guidance for the development of novel non-noble metal catalysts in electrochemical water splitting.

Coupling LaNiO3 Nanorods with FeOOH Nanosheets for Oxygen Evolution Reaction

Perovskite-based electrocatalysts with compositional flexibility and tunable electronic structures have emerged as one of the promising non-noble metal candidates for oxygen evolution reaction (OER). Here, we propose a heterostructure comprising perovskite oxide (LaNiO3) nanorods and iron oxide hydroxide (FeOOH) nanosheets as an effective electrochemical catalyst for OER. The optimized 0.25Fe-LNO catalyst with an interesting 1D-2D hierarchical structure shows a low overpotential of 284 mV at 10 mA cm−2 and a small Tafel slope of 69 mV dec−1. The enhanced performance can be explained by the synergistic effect between LaNiO3 and FeOOH, resulting in an improved electrochemically active surface area, facilitated charge transfer and the optimized adsorption of OH intermediates.

Phosphorous Doped Two-dimensional CoFe2O4 Nanobelt Decorated with Ru Nanoclusters and Co-Fe Hydroxide as Efficient Electrocatalysts Toward Hydrogen Generation

Developing efficient and durable hydrogen evolution reaction (HER) electrocatalysts has attracted considerable concerns for large-scale hydrogen generation. In this work, phosphorous doped two-dimensional (2D) CoFe2O4 nanobelt decorated with Ru and...

Development of Perovskite Oxide-Based Electrocatalysts for Oxygen Evolution Reaction

Perovskite oxides are studied as electrocatalysts for oxygen evolution reactions (OER) because of their low cost, tunable structure, high stability, and good catalytic activity. However, there are two main challenges for most perovskite oxides to be efficient in OER, namely less active sites and low electrical conductivity, leading to limited catalytic performance. To overcome these intrinsic obstacles, various strategies are developed to enhance their catalytic activities in OER. In this review, the recent developments of these strategies is comprehensively summarized and systematically discussed, including composition engineering, crystal facet control, morphology modulation, defect engineering, and hybridization. Finally, perspectives on the design of perovskite oxide-based electrocatalysts for practical applications in OER are given.

Defect engineering of oxide perovskites for catalysis and energy storage: synthesis of chemistry and materials science

Oxide perovskites have emerged as an important class of materials with important applications in many technological areas, particularly thermocatalysis, electrocatalysis, photocatalysis, and energy storage. However, their implementation faces numerous challenges that are familiar to the chemist and materials scientist. The present work surveys the state-of-the-art by integrating these two viewpoints, focusing on the critical role that defect engineering plays in the design, fabrication, modification, and application of these materials. An extensive review of experimental and simulation studies of the synthesis and performance of oxide perovskites and devices containing these materials is coupled with exposition of the fundamental and applied aspects of defect equilibria. The aim of this approach is to elucidate how these issues can be integrated in order to shed light on the interpretation of the data and what trajectories are suggested by them. This critical examination has revealed a number of areas in which the review can provide a greater understanding. These include considerations of (1) the nature and formation of solid solutions, (2) site filling and stoichiometry, (3) the rationale for the design of defective oxide perovskites, and (4) the complex mechanisms of charge compensation and charge transfer. The review concludes with some proposed strategies to address the challenges in the future development of oxide perovskites and their applications.

Comprehensive Understandings into Complete Reconstruction of Precatalysts: Synthesis, Applications, and Characterizations

Reconstruction induced by external environment (such as applied voltage bias and test electrolytes) changes catalyst component and catalytic behaviors. Investigations of complete reconstruction in energy conversion recently receive intensive attention, which promote the targeted design of top-performance materials with maximum component utilization and good stability. However, the advantages of complete reconstruction, its design strategies, and extensive applications have not achieved the profound understandings and summaries it deserves. Here, this review systematically summarizes several important advances in complete reconstruction for the first time, which includes 1) fundamental understandings of complete reconstruction, the characteristics and advantages of completely reconstructed catalysts, and their design principles, 2) types of reconstruction-involved precatalysts for oxygen evolution reaction catalysis in wide pH solution, and origins of limited reconstruction degree as well as design strategies/principles toward complete reconstruction, 3) complete reconstruction for novel material synthesis and other electrocatalysis fields, and 4) advanced in situ/operando or multiangle/level characterization techniques to capture the dynamic reconstruction processes and real catalytic contributors. Finally, the existing major challenges and unexplored/unsolved issues on studying the reconstruction chemistry are summarized, and an outlook for the further development of complete reconstruction is briefly proposed. This review will arouse the attention on complete reconstruction materials and their applications in diverse fields.

Precursor accumulation on nanocarbons for the synthesis of LaCoO3 nanoparticles as electrocatalysts for oxygen evolution reaction

Oxygen evolution reaction (OER) is a key step in energy storage devices. Lanthanum cobaltite (LaCoO₃) perovskite is an active catalyst for OER in alkaline solutions, and it is expected to be a low-cost alternative to the state-of-the-art catalysts (IrO₂ and RuO₂) because transition metals are abundant and inexpensive. For efficient catalysis with LaCoO₃, nanosized LaCoO₃ with a high surface area is desirable for increasing the number of catalytically active sites. In this study, we developed a novel synthetic route for LaCoO₃ nanoparticles by accumulating the precursor molecules over nanocarbons. This precursor accumulation (PA) method for LaCoO₃ nanoparticle synthesis is simple and involves the following steps: (1) a commercially available carbon powder is soaked in a solution of the nitrate salts of lanthanum and cobalt and (2) the sample is dried and calcined in air. The LaCoO₃ nanoparticles prepared by the PA method have a high specific surface area (12 m² g⁻¹), comparable to that of conventional LaCoO₃ nanoparticles. The morphology of the LaCoO₃ nanoparticles is affected by the nanocarbon type, and LaCoO₃ nanoparticles with diameters of less than 100 nm were obtained when carbon black (Ketjen black) was used as the support. Further, the sulfur impurities in nanocarbons significantly influence the formation of the perovskite structure. The prepared LaCoO₃ nanoparticles show excellent OER activity owing to their high surface area and perovskite structure. The Tafel slope of these LaCoO₃ nanoparticles is as low as that of the previously reported active LaCoO₃ catalyst. The results strongly suggest that the PA method provides nanosized LaCoO₃ without requiring the precise control of chemical reactions, harsh conditions, and/or special apparatus, indicating that it is promising for producing active OER catalysts at a large scale.

A simple synthetic process for LaCoO₃ nanoparticles based on the accumulation of precursors on nanocarbon supports was presented. The LaCoO₃ nanoparticles showed excellent OER activity owing to their high surface area and perovskite structure.

Correlation between Oxygen Vacancies and Oxygen Evolution Reaction Activity for a Model Electrode: PrBaCo2 O5+δ

The role of the perovskite lattice oxygen in the oxygen evolution reaction (OER) is systematically studied in the PrBaCo₂ O_5+δ family. The reduced number of physical/chemical variables combined with in-depth characterizations such as neutron dif-fraction, O K-edge X-ray absorption spectroscopy (XAS), electron energy loss spectroscopy (EELS), magnetization and scanning transmission electron microscopy (STEM) studies, helps investigating the complex correlation between OER activity and a single perovskite property, such as the oxygen content. Larger amount of oxygen vacancies appears to facilitate the OER, possibly contributing to the mechanism involving the oxidation of lattice oxygen, i.e., the lattice oxygen evolution reaction (LOER). Furthermore, not only the number of vacancies but also their local arrangement in the perovskite lattice influences the OER activity, with a clear drop for the more stable, ordered stoichiometry.

Phase-Segregated SrCo0.8Fe0.5-xO3-δ/FexOy Heterostructured Catalyst Promotes Alkaline Oxygen Evolution Reaction

Perovskite oxide is a promising alternative to noble metal electrocatalysts for the oxygen evolution reaction (OER). However, as one of the most active oxide catalysts, cubic SrCoO₃ presents poor OER performance relative to the theoretically predicted activity. Appropriate introduction of a guest component in the lattice and surface could largely promote the OER activity. Herein, we present a thermal-induced phase-segregation strategy to synthesize a heterostructured SrCo_0.8Fe_0.5-xO_3-δ/Fe_xO_y (SC8F5) catalyst for OER. This novel perovskite/Fe₃O₄ heterostructure allows us to enhance the electrical conductivity ability, increase the Co oxidation state, and activate the surface oxygen to active oxygen species (O₂^2-/O^-) for efficient OER. In contrast to the poor stability of SrCo_0.8Fe_0.2O_3-δ, we found that the SC8F5 heterostructure with segregated Fe₃O₄ on the surface can mitigate surface reconstruction and stabilize the catalyst structure, thereby increasing catalytic stability.

A three-dimensional flower-like NiCo-layered double hydroxide grown on nickel foam with an MXene coating for enhanced oxygen evolution reaction electrocatalysis

Electrolysis of water is currently one of the cleanest and most efficient ways to produce high-purity hydrogen. The oxygen evolution reaction (OER) at the anode of electrolysis is the key factor affecting the reaction efficiency, which involves the transfer of four electrons and can slow down the overall reaction process. In this work, using nickel foam coated with MXene (Ti3C2T x ) as the carrier, a three-dimensional flower-shaped layered double hydroxide (NiCo-LDH) is grown on Ti3C2T x by a hydrothermal method to fabricate a NiCo-LDH/Ti3C2T x /NF hybrid electrocatalyst for enhanced OER performance. The results reveal that the hybrid electrocatalyst has excellent OER activity in alkaline solution, in which a low overpotential of 223 mV and a small Tafel slope of 47.2 mV dec-1 can be achieved at a current density of 100 mA cm-2. The interface interaction and charge transfer between Ti3C2T x and NiCo-LDH can accelerate the electron transfer rate during the redox process and improve the catalytic activity of the overall reaction. This NiCo-LDH/Ti3C2T x /NF hybrid electrocatalyst may have important research significance and great application potential in catalytic electrolysis of water.