A Facile and Universal Method to Efficiently Fabricate Diverse Protein Capsules for Multiple Potential Applications

Pickering emulsion templated proteinaceous microparticles as glutathione-responsive carriers for endocytosis in tumor cells

The use of glucose oxidase (GOx) to disrupt glucose supply has been identified as a promising strategy in cancer starvation therapy. However, independent delivery of GOx is prone to degradation upon exposure to biological conditions and may cause damage to blood vessels and normal organs during transportation. Although some carriers can protect GOx from the surrounding environment, the harsh preparation conditions may compromise its activity. Moreover, the commonly used materials often exhibit poor biocompatibility and possess certain cytotoxicity. To address this issue, we developed a gentle and efficient method based on Pickering emulsion templates to synthesize protein-based microparticles using zein as the matrix material. These microparticles have high stability and can be tailored to efficiently encapsulate biomolecules while preserving their activity. Moreover, the zein-based microparticles can be triggered to release biomolecules in tumor cells under high glutathione levels, demonstrating excellent responsiveness, biocompatibility, and low cytotoxicity. Additionally, when loaded with GOx, these protein-based microparticles effectively deprive tumor cells of nutrients and induce apoptosis by generating high levels of H2O2, thereby exhibiting enhanced anticancer properties.

Engineering Matrix-Free Drug Protein Nanoparticles with Promising Penetration through Biobarriers for Treating Corneal Neovascularization

Protein drugs have been widely used in treating various clinical diseases because of their high specificity, fewer side effects, and favorable therapeutic effect, but they greatly suffer from their weak permeability through tissue barriers, high sensitivity to microenvironments, degradation by proteases, and rapid clearance by the immune system. Herein, we disrupted the standard protocol where protein drugs must be delivered as the cargo via a delivery system and innovatively developed a free entrapping matrix strategy by simply mixing bevacizumab (Beva) with zinc ions to generate Beva-NPs (Beva-Zn2+), where Beva is coordinatively cross-linked by zinc ions with a loading efficiency as high as 99.2% ± 0.41%. This strategy was universal to generating various protein NPs, with different metal ions (Cu2+, Fe3+, Mg2+, Sr2+). The synthetic conditions of Beva-NPs were optimized, and the generated mechanism was investigated in detail. The entrapment, releasing profile, and the bioactivities of released Beva were thoroughly studied. By using in situ doping of the fourth-generation polyamindoamine dendrimer (G4), the Beva-G4-NPs exhibited extended ocular retention and penetration through biobarriers in the anterior segment through transcellular and paracellular pathways, effectively inhibiting corneal neovascularization (CNV) from 91.6 ± 2.03% to 13.5 ± 1.87% in a rat model of CNV. This study contributes to engineering of protein NPs by using a facile strategy for overcoming the weaknesses of protein drugs and protein NPs, such as weak tissue barrier permeability, low encapsulation efficiency, poor loading capacity, and susceptibility to inactivation.

Mussel-Inspired Lego Approach for Controlling the Wettability of Surfaces with Colorless Coatings

The control of surface wettability with polyphenol coatings has been at the forefront of materials research since the late 1990s, when robust underwater adhesion was linked to the presence of L-DOPA-a catecholic amino acid-in unusually high amounts, in the sequences of several mussel foot proteins. Since then, several successful approaches have been reported, although a common undesired feature of most of them is the presence of a remnant color and/or the intrinsic difficulty in fine-tuning and controlling the hydrophobic character. We report here a new family of functional catechol-based coatings, grounded in the oxidative condensation of readily available pyrocatechol and thiol-capped functional moieties. The presence of at least two additional thiol groups in their structure allows for polymerization through the formation of disulfide bonds. The synthetic flexibility, together with its modular character, allowed us to: (I) develop coatings with applications exemplified by textiles for oil-spill water treatment; (II) develop multifunctional coatings, and (III) fine-tune the WCA for flat and textile surfaces. All of this was achieved with the application of colorless coatings.

Recent advances in surface modification of micro- and nano-scale biomaterials with biological membranes and biomolecules

Surface modification of biomaterial can improve its biocompatibility and add new biofunctions, such as targeting specific tissues, communication with cells, and modulation of intracellular trafficking. Here, we summarize the use of various natural materials, namely, cell membrane, exosomes, proteins, peptides, lipids, fatty acids, and polysaccharides as coating materials on micron- and nano-sized particles and droplets with the functions imparted by coating with different materials. We discuss the applicability, operational parameters, and limitation of different coating techniques, from the more conventional approaches such as extrusion and sonication to the latest innovation seen on the microfluidics platform. Methods commonly used in the field to examine the coating, including its composition, physical dimension, stability, fluidity, permeability, and biological functions, are reviewed.

Structure-function relationships in polymeric multilayer capsules designed for cancer drug delivery

The targeted delivery of cancer drugs to tumor-specific molecular targets represents a major challenge in modern personalized cancer medicine. Engineering of micron and submicron polymeric multilayer capsules allows the obtaining of multifunctional theranostic systems serving as controllable stimulus-responsive tools with a high clinical potential to be used in cancer therapy and detection. The functionalities of such theranostic systems are determined by the design and structural properties of the capsules. This review (1) describes the current issues in designing cancer cell-targeting polymeric multilayer capsules, (2) analyzes the effects of the interactions of the capsules with the cellular and molecular constituents of biological fluids, and (3) presents the key structural parameters determining the effectiveness of capsule targeting. The influence of the morphological and physicochemical parameters and the origin of the structural components and surface ligands on the functional activity of polymeric multilayer capsules at the molecular, cellular, and whole-body levels are summarized. The basic structural and functional principles determining the future trends of theranostic capsule development are established and discussed.

Hierarchical Structures in Macromolecule-assembled Synthetic Cells

Various models of synthetic cells have been developed as researchers have sought to explore the origin of life. Based on the fact that structural complexity is the foundation of higher-order functions, this review will focus on hierarchical structures in synthetic cell models that are inspired by living systems, in which macromolecules are the dominant participants. We discuss the underlying advantages and functions provided by biomimetic higher-order structures from four perspectives, including hierarchical structures in membranes, in the composite construction of membrane-coated artificial cytoplasm, in organelle-like subcellular compartments, as well as in synthetic cell-cell assembled synthetic tissues. In parallel, various feasible driving forces and approaches for the fabrication of such higher-order structures are showcased. Furthermore, we highlight both the implemented and potential applications of biomimetic systems, bottom-up biosynthesis, biomedical tissue engineering, and disease therapy. This thriving field is gradually narrowing the gap between fundamental research and applied science. This article is protected by copyright. All rights reserved.

Biocatalytic self-assembled synthetic vesicles and coacervates: From single compartment to artificial cells

Compartmentalization is an intrinsic feature of living cells that allows spatiotemporal control over the biochemical pathways expressed in them. Over the years, a library of compartmentalized systems has been generated, which includes nano to micrometer sized biomimetic vesicles derived from lipids, amphiphilic block copolymers, peptides, and nanoparticles. Biocatalytic vesicles have been developed using a simple bag containing enzyme design of liposomes to multienzymes immobilized multi-vesicular compartments for artificial cell generation. Additionally, enzymes were also entrapped in membrane-less coacervate droplets to mimic the cytoplasmic macromolecular crowding mechanisms. Here, we have discussed different types of single and multicompartment systems, emphasizing their recent developments as biocatalytic self-assembled structures using recent examples. Importantly, we have summarized the strategies in the development of the self-assembled structure to improvise their adaptivity and flexibility for enzyme immobilization. Finally, we have presented the use of biocatalytic assemblies in mimicking different aspects of living cells, which further carves the path for the engineering of a minimal cell.

Effect of the stiffness of one-layer protein-based microcapsules on dendritic cell uptake and endocytic mechanism

Microcapsules are one of the most promising microscale drug carriers due to their facile fabrication, excellent deformability, and high efficacy in drug storage and delivery. Understanding the effects of their physicochemical properties (size, shape, rigidity, charge, surface chemistry, etc.) on both in vitro and in vivo performance is not only highly significant and interesting but also very challenging. Stiffness, an important design parameter, has been extensively explored in recent years, but how the rigidity of particles influences cellular internalization and uptake mechanisms remains controversial. Here, one-layered lysozyme-based microcapsules with well-controlled stiffness (modulus ranging from 3.49 ± 0.18 MPa to 26.14 ± 1.09 MPa) were prepared and used to investigate the effect of stiffness on the uptake process in dendritic cells and the underlying mechanism. The cellular uptake process and endocytic mechanism were investigated with laser scanning confocal microscopy, mechanism inhibitors, and pathway-specific antibody staining. Our data demonstrated that the stiffness of protein-based microcapsules could be a strong regulator of intracellular uptake and endocytic kinetics but had no obvious effect on the endocytic mechanism. We believe our results will provide a basic understanding of the intracellular uptake process of microcapsules and the endocytic mechanism and inspire strategies for the further design of potential drug delivery microcarriers.

Chemical communication at the synthetic cell/living cell interface

Although the complexity of synthetic cells has continued to increase in recent years, chemical communication between protocell models and living organisms remains a key challenge in bottom-up synthetic biology and bioengineering. In this Review, we discuss how communication channels and modes of signal processing can be established between living cells and cytomimetic agents such as giant unilamellar lipid vesicles, proteinosomes, polysaccharidosomes, polymer-based giant vesicles and membrane-less coacervate micro-droplets. We describe three potential modes of chemical communication in consortia of synthetic and living cells based on mechanisms of distributed communication and signal processing, physical embodiment and nested communication, and network-based contact-dependent communication. We survey the potential for applying synthetic cell/living cell communication systems in biomedicine, including the in situ production of therapeutics and development of new bioreactors. Finally, we present a short summary of our findings.

Insight into the mechanism and formation process of bioinspired poly(amino acid)/polyphenol capsules engineered with fast pH switchable permeability

Capsules have hollow cores and closed wall structures, and they have attracted considerable interest due to their wide applications and significance in life science. The engineering process of bioinspired capsules and related applications have earned heavy concerns. However, the mechanism of capsule formation is often ignored. Herein, based on polyornithine (POR) and tannic acid (TA), two facile strategies to engineer bioinspired capsules were proposed, and the formation mechanisms were deeply explored. We found that the oxidized state of TA had a profound influence not on the thickness or permeability of the formed capsule but on the mechanism and generation process. Compared to TA/POR capsules produced from TA without oxidization (TA/POR), capsules produced from TA with preoxidization (oTA/POR) had thicker shells with higher impermeability. The dominant construction mode in the shells of TA/POR capsules was electrostatic interactions but became Schiff base bonds in oTA/POR capsules. The permeability of oTA/POR displayed pH reversibility and strong pH dependence, with 100% permeability at lower pH and 100% impermeability at pH 7, completing loading/releasing kinetics in minutes at pH 4. We believe these findings contribute to knowledge of bioinspired capsules from engineering processes and formation mechanisms, extending their applications in various fields, such as in drug delivery, artificial cells, and sensors.

Deliver protein across bio-barriers via hexa-histidine metal assemblies for therapy: a case in corneal neovascularization model

Because of their high specificity and low side effects, protein drugs possess a substantial global market. However, the low bioavailability of protein is still a major obstacle to their expanded applications, which is expected to be answered with proper protein formulations. Taking corneal neovascularization (CNV) as an example, we demonstrated a co-assembled system of hexa-histidine and Ava (Avastin) with metal ions (HmA@Ava) could cross the cornea, the most important bio-barrier during the treatment of most diseases of the anterior segment in clinics. We found that the nanosized HmA@Ava efficiently encapsulated Ava with impressive loading capacity without destroying the bioactivity of Ava and assisted Ava penetration through the corneal barriers to effectively inhibit CNV development in an alkali burn rat model with sustained and pH-dependent Ava release. Our results suggested that the co-assembled strategy of protein and HmA is a proper formulation to protein drugs, with promising penetration ability to deliver protein across bio-barriers, which could open a path for topical administration of protein drugs for treatment of various ocular diseases and hold enormous potential for delivery of therapeutic proteins not only for ocular diseases but also for other diseases that require protein treatment.

•

HmA@Ava can bring protein drug, Ava, across over the primary bio-barrier of the anterior segment ​and efficiently treat CNV.

•

HmA@Ava was nanoparticles, with impressive loading capacity without destroying bioactivity of Ava ​and strong pH-dependent release.

•

HmA can open a path for the treatment of eye diseases and hold huge potential to protein drugs to other diseases.

Enzyme-catalyzed cascade reactions on multienzyme proteinosomes

In this research, to mimic the structures and the functionalities of the organelles in living cells multienzyme proteinosomes with β-galactosidase (β-gal), glucose oxidase (GOx) and horseradish peroxidase (HRP) on the surfaces are fabricated by hydrophobic-interaction induced self-assembly approach. To investigate the mechanism of the formation of proteinosomes, poly(di(ethylene glycol) methyl ether methacrylate) (PDEGMA) and bovine serum albumin are employed in a model system and the study demonstrates that the hydrophobic interaction between the dehydrated polymer chains and the hydrophobic patches on the proteins plays a key role in the fabrication of the proteinosomes. Based on the model system, multienzyme proteinosomes with β-gal, GOx and HRP on the surfaces are fabricated through hydrophobic interaction between PDEGMA and enzyme molecules. Enzyme-catalyzed cascade reactions are performed on the surfaces of the proteinosomes, and the immobilized enzymes show higher bioactivities than the "free" enzymes, due to the direct transfer of the product as a substrate from one enzyme molecule to another. This research provides a unique method for the synthesis of multienzyme proteinosomes with improved bioactivities, and the biofunctional structures will find promising applications in medical and biological science.

Polymerization-induced proteinosome formation

In recent years, the fabrication of well-organized proteinosomes has been a popular topic due to the potential applications of the structures in materials science and nanotechnology. A big challenge in the fabrication of proteinosomes is to maintain the structures and the functionalities of proteins on the proteinosomes. In this research, a new concept of polymerization-induced formation of proteinosomes is proposed. In thermal dispersion polymerization of N-isopropyl acrylamide (NIPAM) in the presence of bovine serum albumin (BSA), the growing PNIPAM chains experience phase transition from hydrated coils to dehydrated globules, and the dehydrated PNIPAM chains have hydrophobic interaction with BSA, leading to the formation of hollow proteinosomes. Kinetics studies indicate that there is a transition from the homogeneous polymerization of NIPAM in solution to the heterogeneous polymerization in the proteinosomes. Transmission electron microscopy, atomic force microscopy, confocal laser scanning microscopy and dynamic light scattering all demonstrate the formation of hollow structures. The results of circular dichroism spectroscopy indicate that the secondary structure of BSA remains unchanged in the polymerization process. The formation of proteinosomes is reversible. Upon cooling of the solution to a temperature below the phase transition temperature of PNIPAM, the proteinosomes are dissociated due to the absence of the hydrophobic interaction. The proteinosomes can be used in the encapsulation of hydrophilic compounds in aqueous solution. In this research, not only BSA but also ovalbumin (OVA) is used as a model protein for the fabrication of proteinosomes by the polymerization-induced approach.

Electrostatic assisted fabrication and dissociation of multi-component proteinosomes

Self-assembly of proteins into well-organized proteinosomes has attracted great interest due to the potential medical and biological applications of the structures. Herein, a new concept of electrostatic assisted fabrication of proteinosomes is proposed. The self-assembly is performed by using multi-step dialysis approach, where negatively charged bovine serum albumin-poly(N-isopropylacrylamide) (BSA-PNIPAM) bioconjugate and positively charged enzyme (lysozyme or trypsin) are initially dissolved in phosphate buffer (PB) solution at a high salt concentration, and subsequently the protein solution is dialyzed against PB solutions at low salt concentrations, resulting in the formation of biofunctional proteinosomes. Transmission electron microscopy (TEM), cryo-TEM and light scattering results all demonstrate the formation of hollow structures. The wall of a proteinosome is composed of BSA and enzyme (lysozyme or trypsin), and PNIPAM chains of the bioconjugate are in the corona stabilizing the structure. In comparison with the native enzymes, the enzyme molecules in the assemblies basically retain their bioactivities. The proteinosomes formed by BSA-PNIPAM and lysozyme can be dissociated in the presence of trypsin, and those self-assembled by BSA-PNIPAM and trypsin are able to be self-hydrolyzed, resulting in the dissociation of the structures in aqueous solution. The size and morphology changes of the proteinosomes in the hydrolysis are studied.

Biomimicry of Cellular Motility and Communication Based on Synthetic Soft-Architectures

Cells, sophisticated membrane-bound units that contain the fundamental molecules of life, provide a precious library for inspiration and motivation for both society and academia. Scientists from various disciplines have made great endeavors toward the understanding of the cellular evolution by engineering artificial counterparts (protocells) that mimic or initiate structural or functional cellular aspects. In this regard, several works have discussed possible building blocks, designs, functions, or dynamics that can be applied to achieve this goal. Although great progress has been made, fundamental-yet complex-behaviors such as cellular communication, responsiveness to environmental cues, and motility remain a challenge, yet to be resolved. Herein, recent efforts toward utilizing soft systems for cellular mimicry are summarized-following the main outline of cellular evolution, from basic compartmentalization, and biological reactions for energy production, to motility and communicative behaviors between artificial cell communities or between artificial and natural cell communities. Finally, the current challenges and future perspectives in the field are discussed, hoping to inspire more future research and to help the further advancement of this field.

Bioinspired Protein-Based Assembling: Toward Advanced Life-Like Behaviors

The ability of living organisms to perform structure, energy, and information-related processes for molecular self-assembly through compartmentalization and chemical transformation can possibly be mimicked via artificial cell models. Recent progress in the development of various types of functional microcompartmentalized ensembles that can imitate rudimentary aspects of living cells has refocused attention on the important question of how inanimate systems can transition into living matter. Hence, herein, the most recent advances in the construction of protein-bounded microcompartments (proteinosomes), which have been exploited as a versatile synthetic chassis for integrating a wide range of functional components and biochemical machineries, are critically summarized. The techniques developed for fabricating various types of proteinosomes are discussed, focusing on the significance of how chemical information, substance transportation, enzymatic-reaction-based metabolism, and self-organization can be integrated and recursively exploited in constructed ensembles. Therefore, proteinosomes capable of exhibiting gene-directed protein synthesis, modulated membrane permeability, spatially confined membrane-gated catalytic reaction, internalized cytoskeletal-like matrix assembly, on-demand compartmentalization, and predatory-like chemical communication in artificial cell communities are specially highlighted. These developments are expected to bridge the gap between materials science and life science, and offer a theoretical foundation for developing life-inspired assembled materials toward various applications.

Synthesis of orthogonally reactive multilayered microcapsules

An orthogonally chemically reactive microcapsule is derived from a single polymer following a layer-by-layer-deposition process, where a 1,4 conjugate addition reaction provided a basis for sequential deposition of a chemically reactive nanocomplex.