pH Responsive Carboxymethyl Chitosan/Poly(amidoamine) Molecular Gate Membrane for CO2/N2 Separation

pH-responsive membranes: Mechanisms, fabrications, and applications

Understanding the mechanisms of pH-responsiveness allows researchers to design and fabricate membranes with specific functionalities for various applications. The pH-responsive membranes (PRMs) are particular categories of membranes that have an amazing aptitude to change their properties such as permeability, selectivity and surface charge in response to changes in pH levels. This review provides a brief introduction to mechanisms of pH-responsiveness in polymers and categorizes the applied polymers and functional groups. After that, different techniques for fabricating pH-responsive membranes such as grafting, the blending of pH-responsive polymers/microgels/nanomaterials, novel polymers and graphene-layered PRMs are discussed. The application of PRMs in different processes such as filtration membranes, reverse osmosis, drug delivery, gas separation, pervaporation and self-cleaning/antifouling properties with perspective to the challenges and future progress are reviewed. Lastly, the development and limitations of PRM fabrications and applications are compared to provide inclusive information for the advancement of next-generation PRMs with improved separation and filtration performance.

Process Operability Analysis of Membrane-Based Direct Air Capture for Low-Purity CO2 Production

Addressing climate change constitutes one of the major scientific challenges of this century, and it is widely acknowledged that anthropogenic CO2 emissions largely contribute to this issue. To achieve the "net-zero" target and keep the rise in global average temperature below 1.5 °C, negative emission technologies must be developed and deployed at a large scale. This study investigates the feasibility of using membranes as direct air capture (DAC) technology to extract CO2 from atmospheric air to produce low-purity CO2. In this work, a two-stage hollow fiber membrane module process is designed and modeled using the AVEVA Process Simulation platform to produce a low-purity (≈5%) CO2 permeate stream. Such low-purity CO2 streams could have several possible applications such as algae growth, catalytic oxidation, and enhanced oil recovery. An operability analysis is performed by mapping a feasible range of input parameters, which include membrane surface area and membrane performance metrics, to an output set, which consists of CO2 purity, recovery, and net energy consumption. The base case for this simulation study is generated considering a facilitated transport membrane with high CO2/N2 separation performance (CO2 permeance = 2100 GPU and CO2/N2 selectivity = 1100), when tested under DAC conditions. With a constant membrane area, both membranes' intrinsic performances are found to have a considerable impact on the purity, recovery, and energy consumption. The area of the first module plays a dominant role in determining the recovery, purity, and energy demands, and in fact, increasing the area of the second membrane has a negative impact on the overall energy consumption, without improving the overall purities. The CO2 capture capacity of DAC units is important for implementation and scale-up. In this context, the performed analysis showed that the m-DAC process could be appropriate as a small-capacity system (0.1-1 Mt/year of air), with reasonable recoveries and overall purity. Finally, a preliminary CO2 emissions analysis is carried out for the membrane-based DAC process, which leads to the conclusion that the overall energy grid must be powered by renewable sources for the technology to qualify within the negative emissions category.

Carbon Dioxide Capture by Emerging Innovative Polymers: Status and Perspectives

A significant amount of research has been conducted in carbon dioxide (CO2) capture, particularly over the past decade, and continues to evolve. This review presents the most recent advancements in synthetic methodologies and CO2 capture capabilities of diverse polymer-based substances, which includes the amine-based polymers, porous organic polymers, and polymeric membranes, covering publications in the last 5 years (2019-2024). It aims to assist researchers with new insights and approaches to develop innovative polymer-based materials with improved capturing CO2 capacity, efficiency, sustainability, and cost-effective, thereby addressing the current obstacles in carbon capture and storage to sooner meeting the net-zero CO2 emission target.

A Strategical Improvement in the Performance of CO2/N2 Gas Permeation via Conjugation of L-Tyrosine onto Chitosan Membrane

Rubbery polymeric membranes, containing amine carriers, have received much attention in CO₂ separation because of their easy fabrication, low cost, and excellent separation performance. The present study focuses on the versatile aspects of covalent conjugation of L-tyrosine (Tyr) onto the high molecular weight chitosan (CS) accomplished by using carbodiimide as a coupling agent for CO₂/N₂ separation. The fabricated membrane was subjected to FTIR, XRD, TGA, AFM, FESEM, and moisture retention tests to examine the thermal and physicochemical properties. The defect-free dense layer of tyrosine-conjugated-chitosan, with active layer thickness within the range of ~600 nm, was cast and employed for mixed gas (CO₂/N₂) separation study in the temperature range of 25-115 °C in both dry and swollen conditions and compared to that of a neat CS membrane. An enhancement in the thermal stability and amorphousness was displayed by TGA and XRD spectra, respectively, for the prepared membranes. The fabricated membrane showed reasonably good CO₂ permeance of around 103 GPU and CO₂/N₂ selectivity of 32 by maintaining a sweep/feed moisture flow rate of 0.05/0.03 mL/min, respectively, an operating temperature of 85 °C, and a feed pressure of 32 psi. The composite membrane demonstrated high permeance because of the chemical grafting compared to the bare chitosan. Additionally, the excellent moisture retention capacity of the fabricated membrane accelerates high CO₂ uptake by amine carriers, owing to the reversible zwitterion reaction. All the features make this membrane a potential membrane material for CO₂ capture.

Heterogeneity Regulation of Bilayer Polysaccharide Hydrogels for Integrating pH- and Humidity-Responsive Actuators and Sensors

Bilayer hydrogel-based actuators have attracted much interest because inhomogeneous structures are easily constructed in hydrogels. We used three kinds of polysaccharides, including anionic carboxymethyl cellulose (CMC), cationic chitosan (CS), and amphoteric carboxymethyl chitosan (CMCS), as both structure-constructing units and actuation-controlling units in this work to fabricate physically crosslinked poly(vinyl alcohol) bilayer hydrogels. The spatial heterogeneity was tuned by changing the types and concentrations of polysaccharides in different layers, to regulate pH- and humidity-driven actions of bilayer hydrogels. Based on the distortion of the ionic channel during the humidity-motivated deformation of bilayer hydrogels, a two-in-one flexible device integrating a humidity-driven actuator and humidity-responsive sensor was then developed, which could detect the alterations of environmental humidity in real time. Moreover, good tensile toughness and interfacial bonding as well as the strain-resistance effect endowed the bilayer hydrogels with the capability of identifying human motion as a strain sensor, unlocking more application scenarios. This work provides an overall insight into the heterogeneity regulation of bilayer hydrogels using polysaccharides as stimulus-responsive units and also proposes an interesting strategy of manufacturing hydrogel-based flexible devices with both actuating and sensing capabilities.

Polymeric composite membranes in carbon dioxide capture process: a review

Carbon dioxide (CO₂) emission to the atmosphere is the prime cause of certain environmental issues like global warming and climate change, in the present day scenario. Capturing CO₂ from various stationary industrial emission sources is one of the initial steps to control the aforementioned problems. For this concern, a variety of resources, such as liquid absorbents, solid adsorbents, and membranes, have been utilized for CO₂ capturing from various emission sources. Focused on membrane-based CO₂ capture, polymeric membranes with composite structure (polymeric composite membrane) offer a better performance in CO₂ capturing process than other membranes, due to the composite structure it offers higher gas flux and less material usage, thus facile to use high performed expensive material for membrane fabrication and achieved good efficacy in CO₂ capture. This compressive review delivers the utilization of different polymeric composite membranes in CO₂ capturing applications. Further, the types of polymeric materials used and the different physicochemical modifications of those membrane materials and their CO₂ capturing ability are briefly discussed in the text. In conclusion, the current status and possible perspective ways to improve the CO₂ capture process in industrial CO₂ gas separation applications are described in this review.

Carbon Dioxide Chemically Responsive Switchable Gas Valves with Protonation-Induced Liquid Gating Self-Adaptive Systems

Carbon dioxide (CO₂ ) capture and storage technologies are promising to limit CO₂ emission from anthropogenic activities, to achieve carbon neutrality goals. CO₂ capture requires one to separate CO₂ from other gases, and therefore a gas flow system that exhibits discernible gating behaviors for CO₂ would be very useful. Here we propose a self-adaptive CO₂ gas valve composed of chemically responsive liquid gating systems. The transmembrane critical pressures of the liquid gate vary upon the presence of CO₂ , due to the superamphiphiles assembled by poly(propylene glycol) bis(2-aminopropyl ether) and oleic acid in gating liquids that are protonated specifically by CO₂ . It is shown that the valve can perform self-adaptive regulation for specific gases and different concentrations of CO₂ . This protonation-induced liquid gating mechanism opens a potential platform for applications of CO₂ separators, detectors, sensors and beyond.

Recent developments in polymeric nano-based separation membranes

Polymeric nanomaterials, which have tuneable chemical structures, versatile functionalities, and good compatibility with polymeric matrices, have attracted increasing interest from researchers for the construction of polymeric nano-based separation membranes. With their distinctive nanofeatures, polymeric nano-based membranes show great promise in overcoming bottlenecks in polymer membranes, namely, the trade-off between permeability and selectivity, low stability, and fouling issues. Accordingly, recent studies have focused on tuning the structures and tailoring the surface properties of polymeric nano-based membranes via exploitation of membrane fabrication techniques and surface modification strategies, with the objective of pushing the performance of polymeric nano-based membranes to a new level. In this review, first, the approaches for fabricating polymeric nano-based mixed matrix membranes and homogeneous membranes are summarized, such as surface coating, phase inversion, interfacial polymerization, and self-assembly methods. Next, the manipulation strategies of membrane surface properties, namely, the hydrophilicity/hydrophobicity, charge characteristics, and surface roughness, and interior microstructural properties, namely, the pore size and content, channel construction and regulation, are comprehensively discussed. Subsequently, the separation performances of liquid ions/molecules and gas molecules through polymeric nano-based membranes are systematically reported. Finally, we conclude this review with an overview of various unsolved scientific and technical challenges that are associated with new opportunities in the development of advanced polymeric nano-based membranes.

A review on chitosan-based membranes for sustainable CO2 separation applications: Mechanism, issues, and the way forward

Effective carbon dioxide (CO₂) separation by nominal energy utilization is the factual attempt in the present era of energy scarcity and environmental calamity. In this perspective, the membrane- based gas separation technology is a budding endeavour owing to its cost -effectiveness, ease of operational maintenance and compact modular design. Among various membrane materials, bio-based polymers are of interest as they are abundant and can be obtained from renewable resources, and can also reduce our dependency on exhaustible fossil fuel-based sources. In this review, the structure-property relationship of chitosan and some of its film-forming derivatives has been critically studied for the first time in view of the fundamental properties required for gas separation applications. Various factors affecting the gas permeation performance of chitosan-based membranes have been highlighted along with prospects and propositions for the design of a few novel bio-based membranes based on the exhaustive analyses.

Decoupled pH- and Thermo-Responsive Injectable Chitosan/PNIPAM Hydrogel via Thiol-Ene Click Chemistry for Potential Applications in Tissue Engineering

Stimuli-responsive chitosan (CS) hydrogels exhibit great potential for drug delivery and tissue engineering; however, the structure of these stimuli-responsive CS hydrogels, such as dual pH- and thermo-responsive hydrogels, is difficult to control or needs additional crosslinking agents. Here, a new dual pH- and thermo-responsive hydrogel system is developed by combining pH-responsive C₆ -OH allyl-modified CS (OAL-CS) with thermo-responsive poly(N-isopropylacrylamide) (PNIPAM). The thiol groups in PNIPAM and the allyl groups in OAL-CS can rapidly form crosslinking hydrogel network by "thiol-ene" click chemistry under UV irradiation. As expected, the swelling ratio of the OAL-CS/PNIPAM hydrogel can be controlled by changing pH and temperature. Moreover, the hydrogel displays non-cytotoxic nature toward human bone marrow mesenchymal stem cells, and the histological analyses reveal the subcutaneous tissue with no signs of inflammation after 5 days of injection in vivo. The results indicate that the new OAL-CS/PNIPAM hydrogel has potential to serve as a smart injectable platform for application in drug delivery and tissue engineering.