Revealing Lectin-Sugar Interactions with a Single Au@Ag Nanocube

Plasmonic nanoprobes on single AuNTs for evaluating and monitoring the dynamic release of 2D drug carriers

The use of nanomaterials in drug delivery has gained significant attention in recent years. In this project, we developed a novel localized surface plasmon resonance (LSPR) nanoprobe on single gold triangular nanoplates (AuNTs) for dynamic monitoring of the drug carrier release process. Graphene, as the drug carrier, could be immobilized on the AuNT surface through the π-π* stacking effect. Upon loading or releasing the model drug (doxorubicin, DOX), subtle changes in the local microenvironment's dielectric constant around the AuNTs induced notable red-shifts or blue-shifts in the LSPR scattering spectra of single AuNTs. Furthermore, the spectral shifts led to a continuous enhancement in the red channel of the dark field microscopy (DFM) images during the drug release process in vitro, demonstrating that the drug release system is not susceptible to potential confounding factors. These release kinetics results under different conditions could be well-fitted using the Higuchi desorption model, further proving that this nanoprobe could be employed for evaluating the controlled release ability of 2D nanocarriers. These findings are expected to inspire new ideas and technologies in the preparation of more effective drug carriers, making a significant contribution to the development of drug delivery nanosystems and nanomedicine.

Plasmonic Nanomaterials in Dark Field Sensing Systems

Plasma nanoparticles offer promise in data storage, biosensing, optical imaging, photoelectric integration, etc. This review highlights the local surface plasmon resonance (LSPR) excitation mechanism of plasmonic nanoprobes and its critical significance in the control of dark-field sensing, as well as three main sensing strategies based on plasmonic nanomaterial dielectric environment modification, electromagnetic coupling, and charge transfer. This review then describes the component materials of plasmonic nanoprobes based on gold, silver, and other noble metals, as well as their applications. According to this summary, researchers raised the LSPR performance of composite plasmonic nanomaterials by combining noble metals with other metals or oxides and using them in process analysis and quantitative detection.

Sericin-Based Bio-Inspired Nano-Engineering of Heterometallic AgAu Nanocubes for Attomolar Mefenamic Acid Sensing in the Mobile Phone-Based Surface Plasmon-Coupled Interface

Engineering photo-plasmonic platforms with heterometallic nanohybrids are of paramount significance for realizing augmented sensitivity in fluorescence-based analytical detection. Although myriad nanomaterials with versatile functionalities have been explored in this regard in the surface plasmon-coupled emission (SPCE) interface, light harvesting using nano-antennas synthesized via sustainable bio-inspired routes still remains a high priority in current research. Our study provides a rational design for in situ fabrication of nanoparticles of silver, gold, and their plasmonic hybrids using biocompatible, non-hazardous sericin protein (obtained Bombyx mori) as the reducing and capping agent. The one-pot, user-eco-friendly technology demonstrated here utilizes UV irradiation to promote the photo-induced electron transfer mechanism, thereby yielding nanomaterials of tunable optoelectronic functionalities. The resulting homometallic and heterometallic nanohybrids with robust localized surface plasmon resonances (LSPR) showed strong light-confining attributes when interfaced with the propagating surface plasmon polaritons (SPPs) of the SPCE platform, thereby yielding tunable, highly directional, polarized, and amplified fluorescence emission. The experimentally obtained emission profiles displayed an excellent correlation with the theoretically obtained dispersion diagrams validating the spectro-plasmonic results. The abundant hotspots from AgAu nanocubes presented in excess of 1300-fold dequenched fluorescence enhancement and were utilized for cost-effective and real-time mobile phone-based sensing of biologically relevant mefenamic acid at an attomolar limit of detection. We believe that this superior biosensing performance accomplished using the frugal bioinspired nano-engineering at hybrid interfaces would open new doors for developing nanofabrication protocols with the quintessential awareness of the principles of green nanotechnology, consequently eliminating hazardous chemicals and solvents in the development of point-of-care diagnostic tools.

Protein-structure-dependent spectral shifts of near-infrared photoluminescence from locally functionalized single-walled carbon nanotubes based on avidin-biotin interactions

Single-walled carbon nanotubes (SWCNTs) emit photoluminescence (PL) in the near-infrared (NIR) region (>900 nm). To enhance their PL properties, defect doping via local chemical functionalization has been developed. The locally functionalized SWCNTs (lf-SWCNTs) emit red-shifted and bright E₁₁* PL originating from the excitons localized at the defect-doped sites. Here, we observe the E₁₁* PL energy shifts induced by protein adsorption via the avidin-biotin interactions at the doped sites of lf-SWCNTs. We establish that the difference in the structures of the avidin derivatives notably influences the energy shifts. First, lf-SWCNT-tethering biotin groups (lf-SWCNTs-b) are synthesized based on diazonium chemistry, followed by post-modification. The responsiveness of the lf-SWCNTs-b to different microenvironments is investigated, and a correlation between the E₁₁* PL energy shift and the induction-polarity parameters of surrounding solvents is established. The adsorption of neutravidin onto the lf-SWCNTs-b induces an increase in the induction-polarity parameters around the biotin-doped sites, resulting in the red-shift of the E₁₁* PL peak. The E₁₁* PL shift behaviors of the lf-SWCNTs-b change noticeably when avidin and streptavidin are introduced compared to the case with neutravidin. This is due to the different microenvironments formed at the biotin-doped sites, attributed to the difference in the structural features of the introduced avidin derivatives. Moreover, we successfully enhance the detection signals of lf-SWCNTs-b (>three fold) for streptavidin detection using a fabricated film device. Therefore, lf-SWCNTs exhibit significant promise for application in advanced protein detection/recognition devices based on NIR PL.

SERS-active nanocellulose substrate via in-situ photochemical synthesis

Surface-enhanced Raman scattering spectroscopy (SERS) is a highly-sensitive technology to detect trace target analytes. Herein, a series of flexible SERS substrate for the detection of malachite green (MG) bactericide were developed via in situ photochemical synthesis of silver nanoparticles (AgNPs) based on two dimentional (2D) nanocellulose film without additional reducing agent. For the first time, silver nanocubes (AgNCs) with sharp edges and corners, which are conductive to the formation of hot spots, were successfully prepared and uniformly loaded on the nanocellulose film by controlling the reaction conditions. The obtained composite SERS substrate showed high sensitivity to Rhodamine 6G (R6G) and MG with limit of detection (LOD) of 4.7 × 10^-12 and 1.2 × 10^-8 g/L, respectively. In addition, the relative standard deviation (RSD) was calculated lower than 15 %, demonstrating the good detection reproducibility. The nanocellulose-based 2D SERS substrate shows the potential as a detection platform in the rapid and sensitive identification of various toxic and harmful pollutants.

Long Spiky Au-Ag Nanostar Based Fiber Probe for Surface Enhanced Raman Spectroscopy

The detection performances of noble metal-based surface enhanced Raman spectroscopy (SERS) devices are determined by the compositions and geometries of the metal nanostructures, as well as the substrates. In the current study, long spiky Au-Ag alloy nanostars were synthesized, and both core diameters and spike lengths were controlled by Lauryl sulfobetaine concentrations (as the nanostructure growth skeleton). The long spiky star geometries were confirmed by transmission electron micrograph images. Elements energy dispersive spectrometer mapping confirmed that Au and Ag elements were inhomogeneously distributed in the nanostructures and demonstrated a higher Ag content at surface for potential better SERS performance. Selected synthesized spiky nanostars were uniformly assembled on multi-mode silica fiber for probe fabrication by silanization. The SERS performance were characterized using crystal violet (CV) and rhodamine 6G (R6G) as analyte molecules. The lowest detection limit could reach as low as 10^-8 M, with a 6.23 × 10⁶ enhancement factor, and the relationship between analyte concentrations and Raman intensities was linear for both CV and R6G, which indicated the potential qualitative and quantitative molecule detection applications. Moreover, the fiber probes also showed good reproducibility and stability in the ambient atmosphere.

Flexible 2D nanocellulose-based SERS substrate for pesticide residue detection

Nanocellulose holds considerable promise as an effective surface-enhanced Raman scattering (SERS) substrate for sensitive detection of trace targets. Flexible and high-sensitivity two-dimensional (2D) SERS substrates based on nanocrystalline cellulose (CNC) film were successfully developed via self assembly of two plasma nanoparticles: gold nanoflowers (AuNFs) and silver-coated gold nanocubes (Au@AgNCs). The loading process allows the precise control of nanoparticle distribution density and uniformity on CNC film, which are closely related to the plasma coupling effect between particles. The obtained CNC/Au@AgNC flexible two-dimensional substrate could sensitively detect pesticide residues on apple surface, and the detection limits (LOD) of dimethoate and acetamiprid were 4.1 and 10.7 μg/L, respectively. In addition, Raman signal intensity showed a good linear relationship with pesticide concentration in the range of 10-100 μg/L, which provided great potential for high sensitivity and field detection of dangerous targets.

Synthesis of bimetallic silver-gold nanoparticle composites using a cellulose dope: Tunable nanostructure and its biological activity

Introducing functional metal nanoparticles (NPs) into flexible substrate is being increasingly attempted to expand their application. Here, we extend the synthesis of cellulose to its unmodified dope achieving freestanding nanocomposite decorated with bimetallic Ag-Au NPs through the one pot reaction. In the procedure, cellulose chain not only acts as a reducing agent but also a biocompatible support for NPs with a mean size of 7.9-9.7 nm. Meanwhile, changing the addition order of Ag⁺ and AuCl₄^- generated different atom arrangement in the bimetallic NPs. Moreover, the correlation of bioactivity to NP atom arrangement was studied. The result revealed that the nanocomposite containing NPs with an ultrathin Ag-rich outermost shell around an Au-rich core showed better bactericidal ability while lower cytotoxicity. In addition, the nanocomposite exhibited a sensitive SERS property for determination of R6G with a high enhancement factor of 10⁸.

Glycan Nanobiosensors

This review paper comprehensively summarizes advances made in the design of glycan nanobiosensors using diverse forms of nanomaterials. In particular, the paper covers the application of gold nanoparticles, quantum dots, magnetic nanoparticles, carbon nanoparticles, hybrid types of nanoparticles, proteins as nanoscaffolds and various nanoscale-based approaches to designing such nanoscale probes. The article covers innovative immobilization strategies for the conjugation of glycans on nanoparticles. Summaries of the detection schemes applied, the analytes detected and the key operational characteristics of such nanobiosensors are provided in the form of tables for each particular type of nanomaterial.