Carbon-Free, High-Capacity and Long Cycle Life 1D-2D NiMoO4 Nanowires/Metallic 1T MoS2 Composite Lithium-Ion Battery Anodes

In Situ Electrophoretic Decorated Cactus-Type Metallic-Phase MoS2 on CaMn2O4 Nanofibers for Binder-Free Next-Generation LIBs

Ternary manganese-based oxides, such as CaMn2O4 (CMO) nanofibers fabricated via the electrospinning technique, have the potential to offer higher reversible capacity through conversion reactions in comparison to that of carbon-based anodes. However, its poor electrical conductivity hinders its usage in lithium-ion batteries (LIBs). Hence, to mitigate this issue, controlled single-step in situ decoration of highly conducting metallic-phase MoS2@CMO nanofibers has been achieved for the first time via the electrophoretic deposition (EPD) technique and utilized as a binder-free nanocomposite anode for LIBs. Further, the composition of MoS2@CMO nanofibers has also been optimized to attain better electronic and ionic conductivity. The morphological investigation revealed that the flakes of MoS2 nanoflowers are successfully and uniformly decorated over the CMO nanofibers' surface, forming a cactus-type morphology. As a binder-free nanocomposite LIB anode, CMOMS-7 (7 wt % MoS2@CMO) demonstrates a specific capacity of 674 mA h g-1 after 60 cycles at 50 mA g-1 and maintains a capacity of 454 mA h g-1 even after 300 cycles at 1000 mA g-1. Further, the good rate performance (102 mA h g-1 at 5000 mA g-1) of CMOMS-7 can be ascribed to the enhanced electrical conductivity provided by the metallic-phase MoS2. Moreover, the feasibility of CMOMS-7 is thoroughly investigated by using a full Li-ion cell incorporating a binder-free cathode of LiNi0.3Mn0.3Co0.3O2 (NMC). This configuration showcases an impressive energy density of 154 Wh kg-1. Thus, the hierarchical and aligned structure of CMO nanofibers combined with highly conductive MoS2 nanoflowers facilitates charge transportation within the composite electrodes. This synergistic effect significantly enhances the energy density of the conversion-based nanocomposites, making them highly promising anodes for advanced LIBs.

A Review on MoS2 Energy Applications: Recent Developments and Challenges

Molybdenum disulfide (MoS2) is a promising transition metal dichalcogenide (TMD) that has exceptional electronic, magnetic, optical, and mechanical properties. It can be semiconducting, superconducting, or an insulator according to its polymorph. Its bandgap structure changes from indirect to direct when moving towards its nanostructures, which opens a door to bandgap engineering for MoS2. Its supercapacitive and catalytic activity was recently noticed and studied, in order to include this material in a wide range of energy applications. In this work, we present MoS2 as a future material for energy storage and generation applications, especially solar cells, which are a cornerstone for a clean and abundant source of energy. Its role in water splitting reactions can be utilized for energy generation (hydrogen evolution) and water treatment at the same time. Although MoS2 seems to be a breakthrough in the energy field, it still faces some challenges regarding its structure stability, production scalability, and manufacturing costs.

Stabilization of Organic Cathodes by a Temperature-Induced Effect Enabling Higher Energy and Excellent Cyclability

To face the challenge of all-climate application, organic rechargeable batteries must hold the capability of efficiently operating both at high temperatures (>50 °C) and low temperatures (-20 °C). However, the low electronic conductivity and high solubility of organic molecules significantly impede the development in electrochemical energy storage. This issue can be effectively diminished using functionalized porphyrin complex-based organic cathodes by the in-situ electropolymerization of electrodes at elevating temperatures during electrochemical cycling. [5,15-bis(ethynyl)-10,20-diphenylporphinato]copper(II) (CuDEPP)- and 5,15-bis(ethynyl)-10,20-diphenylporphinato (DEPP)-based cathodes are proposed as models, and it is proved that a largely improved electrochemical performance is observed in both cathodes at a high operating temperature. Reversible capacities of 249 and 105 mA h g^-1 are obtained for the CuDEPP and DEPP cathodes after 1000 cycles at 50 °C, respectively. The result indicates that the temperature-induced in situ electropolymerization strategy responds to the enhanced electrochemical performance. This study would open new opportunities for developing highly stable organic cathodes for electrochemical energy storage even at high temperatures.

Stable Potassium Metal Anodes with an All-Aluminum Current Collector through Improved Electrolyte Wetting

This is the first report of successful potassium metal battery anode cycling with an aluminum-based rather than copper-based current collector. Dendrite-free plating/stripping is achieved through improved electrolyte wetting, employing an aluminum-powder-coated aluminum foil "Al@Al," without any modification of the support surface chemistry or electrolyte additives. The reservoir-free Al@Al half-cell is stable at 1000 cycles (1950 h) at 0.5 mA cm^-2 , with 98.9% cycling Coulombic efficiency and 0.085 V overpotential. The pre-potassiated cell is stable through a wide current range, including 130 cycles (2600 min) at 3.0 mA cm^-2 , with 0.178 V overpotential. Al@Al is fully wetted by a 4 m potassium bis(fluorosulfonyl)imide-dimethoxyethane electrolyte (θ_CA  = 0°), producing a uniform solid electrolyte interphase (SEI) during the initial galvanostatic formation cycles. On planar aluminum foil with a nearly identical surface oxide, the electrolyte wets poorly (θ_CA  = 52°). This correlates with coarse irregular SEI clumps at formation, 3D potassium islands with further SEI coarsening during plating/stripping, possibly dead potassium metal on stripped surfaces, and rapid failure. The electrochemical stability of Al@Al versus planar Al is not related to differences in potassiophilicity (nearly identical) as obtained from thermal wetting experiments. Planar Cu foils are also poorly electrolyte-wetted and become dendritic. The key fundamental takeaway is that the incomplete electrolyte wetting of collectors results in early onset of SEI instability and dendrites.

Unveiling a bimetallic FeCo-coupled MoS2 composite for enhanced energy storage

Sodium and potassium-ion batteries are promising for energy storage owing to their source abundance and low cost; however, most active materials still suffer from sluggish kinetics, huge volume variations, and poor conductivity and cycle stability. It remains a great challenge to explore appropriate electrode materials for scaled practical applications. Herein, mesoporous FeCo-incorporated MoS₂ nanosheets encapsulated into a porous carbon framework (FeCo@C@MoS₂) are smartly designed, artistically fabricated and evaluated for sodium and potassium storage. The FeCo@C@MoS₂ electrode displays high reversible capacities of 380 mA h g^-1 and 147 mA h g^-1 at 500 mA g^-1 for sodium and potassium storage, respectively. FeCo derived from a Prussian blue analogue promotes fast reaction kinetics of Na⁺/K⁺ transport, introduces the formation of a stable solid electrolyte interphase layer (SEI) in both the interior and exterior of the cube-like porous nanostructure and controls the Na⁺/K⁺ fluxes, suppressing the growth of metal dendrites. The porous carbon framework with large interstitial voids can effectively buffer volume variations and mitigate mechanical stress, contributing significantly to alleviate strain intensification on the surface layer between MoS₂ and FeCo during repeated plating/stripping processes. Density functional theoretical calculations (DFT) further confirm that the synthesized nanostructure shows an intensified electron state, elevated anti-stress ability, high-quality SEI film and preferable Na⁺/K⁺ adsorption energies. This in-depth investigation of the electrochemical performance and the extended energy storage mechanism based on metal alloy/sulfide nanostructures for sodium and potassium storage provides guidance for the smart design of heterojunctions for remarkable energy storage.