In Vivo Optical Performance of a New Class of Near-Infrared-Emitting Conjugated Polymers: Borylated PF8-BT

Post-polymerisation approaches for the rapid modification of conjugated polymer properties

Post-polymerisation functionalisation provides a facile and efficient way for the introduction of functional groups on the backbone of conjugated polymers. Using post-polymerisation functionalisation approaches, the polymer chain length is usually not affected, meaning that the resulting polymers only differ in their attached functional groups or side chains, which makes them particularly interesting for investigating the influence of the different groups on the polymer properties. For such functionalisations, highly efficient and selective reactions are needed to avoid the formation of complex mixtures or permanent defects in the polymer backbone. A variety of suitable synthetic approaches and reactions that fulfil these criteria have been identified and reported. In this review, a thorough overview is given of the post-polymerisation functionalisations reported to date, with the methods grouped based on the type of reaction used: cycloaddition, oxidation/reduction, nucleophilic aromatic substitution, or halogenation and subsequent cross-coupling reaction. Instead of modifications on the aliphatic side chains of the conjugated polymers, we focus on modifications directly on the conjugated backbones, as these have the most pronounced effect on the optical and electronic properties. Some of the discussed materials have been used in applications, ranging from solar cells to bioelectronics. By providing an overview of this versatile and expanding field for the first time, we showcase post-polymerisation functionalisation as an exciting pathway for the creation of new conjugated materials for a range of applications.

Controlling Energy Gaps of π-Conjugated Polymers by Multi-Fluorinated Boron-Fused Azobenzene Acceptors for Highly Efficient Near-Infrared Emission

We demonstrate that multi-fluorinated boron-fused azobenzene (BAz) complexes can work as a strong electron acceptor in electron donor-acceptor (D-A) type π-conjugated polymers. Position-dependent substitution effects were revealed, and the energy level of the lowest unoccupied molecular orbital (LUMO) was critically decreased by fluorination. As a result, the obtained polymers showed near-infrared (NIR) emission (λ_PL =758-847 nm) with high absolute photoluminescence quantum yield (Φ_PL =7-23%) originating from low-lying LUMO energy levels of the BAz moieties (-3.94 to -4.25 eV). Owing to inherent solid-state emissive properties of the BAz units, deeper NIR emission (λ_PL =852980 nm) was detected in film state. Clear solvent effects prove that the NIR emission is from a charge transfer state originating from a strong D-A interaction. The effects of fluorination on the frontier orbitals are well understandable and predictable by theoretical calculation with density functional theory. This study demonstrates the effectiveness of fluorination to the BAz units for producing a strong electron-accepting unit through fine-tuning of energy gaps, which can be the promising strategy for designing NIR absorptive and emissive materials.

Different PEG-PLGA Matrices Influence In Vivo Optical/Photoacoustic Imaging Performance and Biodistribution of NIR-Emitting π-Conjugated Polymer Contrast Agents

The π-conjugated polymer poly[2,6-(4,4-bis-(2-ethylhexyl)-4H-cyclopenta[2,1-b;3,4-b0]-dithiophene)-alt-4,7-(2,1,3-benzothiadiazole)] (PCPDTBT) with deep-red/near-infrared (NIR) absorption and emission has been investigated as a contrast agent for in vivo optical and photoacoustic imaging. PCPDTBT is encapsulated within poly(ethylene glycol) methyl ether-block-poly(lactide-co-glycolide) (PEG_2kDa -PLGA_4kDa or PEG_5kDa -PLGA_55kDa ) micelles or enveloped by the phospholipid, 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(polyethylene glycol)-2000] (PEG_2kDa -DPPE), to investigate the formulation effect on imaging performance, biodistribution, and biocompatibility. Nanoparticles that meet the quality requirements for parenteral administration are generated with similar physicochemical properties. Optical phantom imaging reveals that both PEG-PLGA systems exhibit a 30% higher signal-to-background ratio (SBR) than PEG_2kDa -DPPE. This trend cannot be observed in a murine HeLa xenograft model following intravenous administration since dramatic differences in biodistribution are observed. PEG_2kDa -PLGA_4kDa systems accumulate more rapidly in the liver compared to other formulations and PEG_2kDa -DPPE demonstrates a higher tumor localization. Protein content in the "hard" corona differs between formulations (PEG_2kDa -DPPE < PEG_2kDa -PLGA_4kDa < PEG_5kDa -PLGA_55kDa ), although this observation alone does not explain biodistribution patterns. PEG_2kDa -PLGA_4kDa systems show the highest photoacoustic amplitude in a phantom, but also a lower signal in the tumor due to differences in biodistribution. This study demonstrates that formulations for conjugated polymer contrast agents can have significant impact on both imaging performance and biodistribution.

Complexation of 2,7-diazapyrene with boron for structural and electronic tuning

Complexation of tetra(hydroxyphenyl)-2,7-diazapyrene with boron provided the boron complexes as anti- and syn-isomers. The structural difference induces self-association behaviour of the syn-isomer and isomerisation of the anti-isomer in the solution and solid states.

The effect of alkyl chain lengths on the red-to-near-infrared emission of boron-fused azomethine conjugated polymers and their film-state stimuli-responsivities

We present systematic studies of the dependence of the red-to-near-infrared emission and stimuli-responsive properties of boron-fused azomethine conjugated copolymers on the lengths of the alkyl chains.

Investigating conjugated polymer nanoparticle formulations for lateral flow immunoassays

Lateral flow immunoassays (LFI) are valuable tools for point-of-care testing. However, their sensitivity is limited and can be further improved. Nanoparticles (NP) of conjugated polymers (CPNs), also known as Pdots, are reported to be highly sensitive fluorescent probes, but a direct comparison with conventional colloidal gold-based (Au-NP) LFI using the same antibody–antigen pair is missing to date. Furthermore, the influence of brightness and Stokes shift of CPs on the signal : background ratio (SBR) needs to be evaluated. In this study, we encapsulated two different CPs, poly-(9,9-di-n-octyl-fluorenyl-2,7-diyl) (PDOF) and poly-(2,5-di-hexyloxy-cyanoterephthalylidene) (CN-PPV) in silica shell-crosslinked Pluronic© micelles (Si-NP) and Pdots and investigated the NP brightness with respect to CP loading dose. The brightest formulation of each NP system was conjugated to rabbit IgG as a model antigen and the SBR was investigated in an ELISA-like microplate assay and LFI. Two reference particles, Au-NP and a polystyrene NP (PS-NP) loaded with a small-molecule fluorescent dye were conjugated to IgG and compared to the Si-NP and Pdots. The mass of Pdots required for detection in LFI was at least two orders of magnitude lower than that of Si-NP and the reference NP. The SBR of CN-PPV (moderate brightness, large Stokes shift) was two to three times higher than the SBR of PDOF (high brightness, small Stokes shift). To combine the favourable properties of both CPs, a polymer blend of PDOF and CN-PPV was encapsulated in Pdots, and resulted in further increase of SBR in the microplate assay and LFI. In summary, combining two CPs with different properties can lead to fluorescent signal-transducers for applications such as ELISA and LFIs, which can enhance the detection limit of the assay by 2–3 orders of magnitude.

Conjugated polymer nanoparticles are sensitive signal transducers in lateral flow immunoassays.

Dual-modal imaging-guided theranostic nanocarriers based on 2-methoxyestradiol and indocyanine green

Drug toxicity and insufficient drug dosing place a limit on the effect of chemotherapy. Optimal efficacy is achieved by exposing tumor cells to the maximum tolerated dose of a chemotherapeutic drug. In this study, we developed a strategy (graphic summary) for enhancing the therapeutic and diagnostic capabilities of known chemotherapeutics. We used a dual-mode near-infrared (NIR) fluorescence/photoacoustic imaging technology to achieve actively guided tumor targeting of the photothermal therapeutic agent indocyanine green (ICG) and the chemotherapeutic drug 2-methoxyestradiol (2-ME), which were loaded into thermosensitive liposomes (TSLs) with surface-grafted tumor-targeting peptide cRGDyk (cRGDyk-2-ME@ICG-TSLs). In vitro studies demonstrated that cRGDyk-2-ME@ICG-TSLs effectively induced drug accumulation and cytotoxicity in NIR laser-irradiated B16-F10 melanoma cells using dual targeting based on the cRGDyk peptide and temperature sensitivity. An in vivo study showed that 24 h after intravenously injecting cRGDyk-2-ME@ICG-TSLs into melanoma tumor-bearing mice, the dual-mode NIR fluorescence/photoacoustic imaging could accurately identify tumors and normal tissues. In addition, the combination of cRGDyk-2-ME@ICG-TSLs and NIR radiation suppressed tumor growth in tumor-bearing nude mice and was associated with a low risk of side effects on normal organs. Our results indicate that TSLs are a suitable drug delivery system for diagnostic and chemotherapeutic agents guided by dual-mode imaging.

Enhanced optical imaging properties of lipid nanocapsules as vehicles for fluorescent conjugated polymers

Conjugated polymer nanoparticles (CPNs) have emerged as highly photostable probes for optical and photoacoustic imaging. However, the aggregation of conjugated polymer (CP) molecules upon nanoparticle formation is associated with fluorescence quenching, poor yields and mutable particle sizes. This study investigated whether the CP encapsulation within the liquid midchain triglyceride (MCT) core of lipid nanocapsules (LNCs) may achieve reduced packing of CP chains leading to a stable system with enhanced optical features. The red- and near infrared-emitting CPs, CN-PPV and PCPDTBT, showed precipitation and aggregation-induced quenching with concentrations >~25 µg/mL in MCT alone. Despite this, CP encapsulation within LNCs abolished quenching at concentrations up to 1500 µg/mL. PCPDTBT-LNCs exhibited a quantum yield of 2.8% and a higher signal:background ratio in an optical imaging phantom compared to literature reports of PCPDTBT encapsulated in PEG-PLGA nanoparticles. In contrast, PCPDTBT-LNCs had slightly lower photoacoustic amplitudes than reported PEG-PLGA systems. CP-LNCs were also stable in size (32 ± 0.7 nm) and photoluminescence over 21 days at 4 °C, 25 °C and 37 °C. In summary, encapsulation of CP within the liquid core of lipid nanocapsules enhances the optical properties of fluorescent CP.

Biological studies of an ICG-tagged aptamer as drug delivery system for malignant melanoma

Malignant melanoma accounts for about 1% of all skin malignant tumors and represents the most aggressive and lethal form of skin cancer. Clinically, there exist different therapeutic options for melanoma treatment, such as surgery, chemotherapy, radiotherapy, photodynamic therapy and immunotherapy. However, serious adverse effects usually arise, and survival rates are still low because a high number of patients present relapses within 6-9 months after therapy. AS1411 is a G-quadruplex (G4) aptamer capable of tumor-specific recognition, since it binds to nucleolin, a multi-functional protein expressed in many different types of cancer cells. In this work, we present a novel drug delivery system composed of AS1411 and indocyanine green (ICG) to track its accumulation in tumoral cells in a melanoma mouse model. Using a simple supramolecular strategy, we conjugated the complex AS1411-ICG with C₈ ligand, an acridine orange derivative with potential anticancer ligand. Then, we performed in vitro cytotoxicity experiments using the B16 mouse melanoma cell line, and in vivo experiments using a B16 mouse melanoma model to study biodistribution and histological changes. The circular dichroism (CD) data suggest that C₈ does not affect the parallel G4 topology of AS1411-ICG, whereas it increases its thermal stability. Incubation of B16 melanoma cells with the AS1411-ICG complex associated with C₈ increases the cytotoxicity compared with AS1411-ICG alone. From the in vivo studies, we conclude that both AS1411-ICG and AS1411-ICG-C₈ presented the potential to accumulate preferentially in tumor tissues. Moreover, these compounds seem to be efficiently removed from the mice's bodies through kidney clearance. In summary, these results suggest that these complexes derived from AS1411 aptamer could act as a delivery system of ligands with antitumoral activity for in vivo melanoma therapy.

Recent Advances in π-Conjugated N^C-Chelate Organoboron Materials

Boron-containing π-conjugated materials are archetypical candidates for a variety of molecular scale applications. The incorporation of boron into the π-conjugated frameworks significantly modifies the nature of the parent π-conjugated systems. Several novel boron-bridged π-conjugated materials with intriguing structural, photo-physical and electrochemical properties have been reported over the last few years. In this paper, we review the properties and multi-dimensional applications of the boron-bridged fused-ring π-conjugated systems. We critically highlight the properties of π-conjugated N^C-chelate organoboron materials. This is followed by a discussion on the potential applications of the new materials in opto-electronics (O-E) and other areas. Finally, attempts will be made to predict the future direction/outlook for this class of materials.