Developing Indium-based Ternary Spinel Selenides for Efficient Solid Flexible Zn-Air Batteries and Water Splitting

Intermetallic Cobalt Indium Nanoparticles as Oxygen Evolution Reaction Precatalyst: A Non-Leaching p-Block Element

Merely all transition-metal-based materials reconstruct into similar oxyhydroxides during the electrocatalytic oxygen evolution reaction (OER), severely limiting the options for a tailored OER catalyst design. In such reconstructions, initial constituent p-block elements take a sacrificial role and leach into the electrolyte as oxyanions, thereby losing the ability to tune the catalyst's properties systematically. From a thermodynamic point of view, indium is expected to behave differently and should remain in the solid phase under alkaline OER conditions. However, the structural behavior of transition metal indium phases during the OER remains unexplored. Herein, are synthesized intermetallic cobalt indium (CoIn3) nanoparticles and revealed by in situ X-ray absorption spectroscopy and scanning transmission microscopy that they undergo phase segregation to cobalt oxyhydroxide and indium hydroxide. The obtained cobalt oxyhydroxide outperforms a metallic-cobalt-derived one due to more accessible active sites. The observed phase segregation shows that indium behaves distinctively differently from most p-block elements and remains at the electrode surface, where it can form lasting interfaces with the active metal oxo phases.

A Review of Rechargeable Zinc-Air Batteries: Recent Progress and Future Perspectives

Zinc-air batteries (ZABs) are gaining attention as an ideal option for various applications requiring high-capacity batteries, such as portable electronics, electric vehicles, and renewable energy storage. ZABs offer advantages such as low environmental impact, enhanced safety compared to Li-ion batteries, and cost-effectiveness due to the abundance of zinc. However, early research faced challenges due to parasitic reactions at the zinc anode and slow oxygen redox kinetics. Recent advancements in restructuring the anode, utilizing alternative electrolytes, and developing bifunctional oxygen catalysts have significantly improved ZABs. Scientists have achieved battery reversibility over thousands of cycles, introduced new electrolytes, and achieved energy efficiency records surpassing 70%. Despite these achievements, there are challenges related to lower power density, shorter lifespan, and air electrode corrosion leading to performance degradation. This review paper discusses different battery configurations, and reaction mechanisms for electrically and mechanically rechargeable ZABs, and proposes remedies to enhance overall battery performance. The paper also explores recent advancements, applications, and the future prospects of electrically/mechanically rechargeable ZABs.

Transition metal chalcogenides carbon-based as bifunctional cathode electrocatalysts for rechargeable zinc-air battery: An updated review

The rechargeable alkaline aqueous zinc-air batteries (ZABs) are prospective candidates to supply the energy demand for their high theoretical energy density, inherent safety, and environmental friendliness. However, their practical application is mainly restricted by the unsatisfactory efficiency of the air electrode, leading to an intense search for high-efficient oxygen electrocatalysts. In recent years, the composites of carbon materials and transition metal chalcogenides (TMC/C) have emerged as promising alternatives because of the unique properties of these single compounds and the synergistic effect between them. In this sense, this review presented the electrochemical properties of these composites and their effects on the ZAB performance. The operational fundamentals of the ZABs were described. After elucidating the role of the carbon matrix in the hybrid material, the latest developments in the ZAB performance of the monometallic structure and spinel of TMC/C were detailed. In addition, we report topics on doping and heterostructure due to the large number of studies involving these specific defects. Finally, a critical conclusion and a brief overview sought to contribute to the advancement of TMC/C in the ZABs.

A comprehensive review on the electrochemical parameters and recent material development of electrochemical water splitting electrocatalysts

Electrochemical splitting of water is an appealing solution for energy storage and conversion to overcome the reliance on depleting fossil fuel reserves and prevent severe deterioration of the global climate. Though there are several fuel cells, hydrogen (H2) and oxygen (O2) fuel cells have zero carbon emissions, and water is the only by-product. Countless researchers worldwide are working on the fundamentals, i.e. the parameters affecting the electrocatalysis of water splitting and electrocatalysts that could improve the performance of the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) and overall simplify the water electrolysis process. Noble metals like platinum for HER and ruthenium and iridium for OER were used earlier; however, being expensive, there are more feasible options than employing these metals for all commercialization. The review discusses the recent developments in metal and metalloid HER and OER electrocatalysts from the s, p and d block elements. The evaluation perspectives for electrocatalysts of electrochemical water splitting are also highlighted.

Niobium-Incorporated CoSe2 Nanothorns with Electronic Structural Alterations for Efficient Alkaline Oxygen Evolution Reaction at High Current Density

Developing cost-effective, highly active, and robust electrocatalysts for oxygen evolution reaction (OER) at high current density is a critical challenge in water electrolysis since the sluggish kinetics of the OER significantly impedes the energy conversion efficiency of overall water splitting. Here, a 1D nanothorn-like Nb-CoSe₂ /CC (CC=carbon cloth) structure was developed as an efficient OER catalyst. The optimized Nb-CoSe₂ /CC catalyst exhibited remarkable OER performance with the low overpotentials of 220 mV at 10 mA cm^-2 and 297 mV 200 mA cm^-2 and a small Tafel slope (54.1 mV dec^-1 ) in 1.0 m KOH electrolyte. More importantly, the Nb-CoSe₂ /CC electrode displayed superior stability after 60 h of continuous operation. In addition, cell voltages of 1.52 and 1.93 V were required to achieve 10 and 500 mA cm^-2 for the electrolyzer made of Nb-CoSe₂ /CC (anode) and the Pt/C (cathode). Density functional theory (DFT) calculations combined with experimental results revealed that incorporating niobium into the CoSe₂ could optimize the adsorption free energy of the reaction intermediates and enhance the conductivity to improve the catalytic activity further. Additionally, the super-hydrophilicity of Nb-CoSe₂ /CC resulting from the surface defects increased the surface wettability and facilitated reaction kinetics. These results indicate that Nb-CoSe₂ /CC intrinsically enhances OER performance and possesses potential practical water electrolysis applications.

Enhancing the bifunctional activity of CoSe2 nanocubes by surface decoration of CeO2 for advanced zinc-air batteries

The coupling of oxygen evolution and reduction reactions (OER and ORR) plays a key role in rechargeable Zn-air batteries (ZABs). However, both OER and ORR still suffer from sluggish kinetics, even when using the mainstream precious metal-based catalysts. Herein, oxygen vacancies-rich CeO₂ decorated CoSe₂ nanocubes are proposed as a novel air electrode to drive OER and ORR for ZABs. The resultant CeO₂ coupled CoSe₂ nanocubes (CeO₂@CoSe₂-NCs) catalyst exhibits a significantly enhanced bifunctional activity relative to the pristine CoSe₂-NCs and the pristine CeO₂. Moreover, an assembled ZABs using this CeO₂@CoSe₂-NCs electrode delivers a high output power density of 153 mW cm^-2 and a long-life stability over 400 cycles, superior to the benchmark Pt/C-IrO₂ electrode. Theoretical calculations reveal that the electronic interaction and oxygen vacancies in CeO₂@CoSe₂-NCs contribute to efficient oxygen electrocatalysis. This protocol provides a promising approach of constructing oxygen vacancies in hybrid catalysts for energy conversion and storage devices.

Recent Advancements in Chalcogenides for Electrochemical Energy Storage Applications

Energy storage has become increasingly important as a study area in recent decades. A growing number of academics are focusing their attention on developing and researching innovative materials for use in energy storage systems to promote sustainable development goals. This is due to the finite supply of traditional energy sources, such as oil, coal, and natural gas, and escalating regional tensions. Because of these issues, sustainable renewable energy sources have been touted as an alternative to nonrenewable fuels. Deployment of renewable energy sources requires efficient and reliable energy storage devices due to their intermittent nature. High-performance electrochemical energy storage technologies with high power and energy densities are heralded to be the next-generation storage devices. Transition metal chalcogenides (TMCs) have sparked interest among electrode materials because of their intriguing electrochemical properties. Researchers have revealed a variety of modifications to improve their electrochemical performance in energy storage. However, a stronger link between the type of change and the resulting electrochemical performance is still desired. This review examines the synthesis of chalcogenides for electrochemical energy storage devices, their limitations, and the importance of the modification method, followed by a detailed discussion of several modification procedures and how they have helped to improve their electrochemical performance. We also discussed chalcogenides and their composites in batteries and supercapacitors applications. Furthermore, this review discusses the subject’s current challenges as well as potential future opportunities.

Defective Bimetallic Selenides for Selective CO2 Electroreduction to CO

CO₂ electroreduction (CO₂ RR) to CO is promising for the carbon cycle but still remains challenging. Au is regarded as the most selective catalyst for CO₂ RR, but its high cost significantly hinders its industrial application. Herein, the bimetallic CuInSe₂ is found to exhibit an Au-like catalytic feature: i) the interaction of Cu and In orbitals induces a moderate adsorption strength of CO₂ RR intermediates and favors the reaction pathway; and ii) the hydrogen evolution is energetically unfavorable on CuInSe₂ , as a surface reconstruction along with high energy change will occur after hydrogen adsorption. Furthermore, the Se vacancy is found to induce an electron redistribution, slightly tune the band structure, and optimize the CO₂ RR route of bimetallic selenide. Consequently, the Se-defective CuInSe₂ (V-CuInSe₂ ) achieves a highly selective CO production ability that is comparable to noble metals in aqueous electrolyte, and the V-CuInSe₂ cathode shows a satisfactory performance in an aqueous Zn-CO₂ cell. This work demonstrates that designing cost-effective catalysts with noble-metal-like properties is an ideal strategy for developing efficient electrocatalysts. Moreover, the class of transition bimetallic selenides has shown promising prospects as active and cost-effective electrocatalysts owing to their unique structural, electronic, and catalytic properties.

In situ encapsulation engineering boosts the electrochemical performance of highly graphitized N-doped porous carbon-based copper-cobalt selenides for bifunctional oxygen electrocatalysis

Transition-metal selenides are gaining prominence as promising electrode materials for energy storage applications owing to their low electronegativity and environment-friendliness compared with metal sulfides/oxides. Herein, a CuCoSe@NC nanocomposite with copper-cobalt selenides embedded in highly graphitized N-doped porous carbon was synthesized by an in situ encapsulation strategy with metal-organic framework crystals (CuCo-BDC) as templates followed by selenization, and used as a bifunctional electrocatalyst for Zn-air batteries in lye. The result shows that the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) catalytic activity of the optimal CuCoSe@NC-2 was enhanced, and the assembled Zn-air batteries exhibited a remarkable electrochemical performance with the use of the CuCoSe@NC-2 electrode, including a high power density (137.1 mW cm^-2) and excellent charge-discharge cycling stability, which were better than those of the Pt/C + RuO₂ electrocatalyst. Such improvement is attributed not only to the higher porosity and larger specific surface area (342 m² g^-1) of the carbon matrix, which increased the contact area with oxygen-containing species, but also the encapsulation effect of the highly graphitized N-doped carbon layer and the high content of pyridine-N species also further improved the conductivity of selenide composites. This work has introduced N-doped bimetallic selenides as an ideal candidate for bifunctional electrocatalysts.