Indoor Photovoltaics: Photoactive Material Selection, Greener Ink Formulations, and Slot-Die Coated Active Layers

Application of Metal Halide Perovskite in Internet of Things

The Internet of Things (IoT) technology connects the real and network worlds by integrating sensors and internet technology, which has greatly changed people's lifestyles, showing its broad application prospects. However, traditional materials for the sensors and power components used in the IoT limit its development for high-precision detection, long-term endurance, and multi-scenario applications. Metal halide perovskite, with unique advantages such as excellent photoelectric properties, an adjustable bandgap, flexibility, and a mild process, exhibits enormous potential to meet the requirements for IoT development. This paper provides a comprehensive review of metal halide perovskite's application in sensors and energy supply modules within IoT systems. Advances in perovskite-based sensors, such as for gas, humidity, photoelectric, and optical sensors, are discussed. The application of indoor photovoltaics based on perovskite in IoT systems is also discussed. Lastly, the application prospects and challenges of perovskite-based devices in the IoT are summarized.

Printing and Coating Techniques for Scalable Organic Photovoltaic Fabrication

Within recent years, there has been an increased interest towards organic photovoltaics (OPVs), especially with their significant device performance reaching beyond 19% since 2022. With these advances in the device performance of laboratory-scaled OPVs, there has also been more attention directed towards using printing and coating methods that are compatible with large-scale fabrication. Though large-area (>100 cm2) OPVs have reached an efficiency of 15%, this is still behind that of laboratory-scale OPVs. There also needs to be more focus on determining strategies for improving the lifetime of OPVs that are suitable for scalable manufacturing, as well as methods for reducing material and manufacturing costs. In this paper, we compare several printing and coating methods that are employed to fabricate OPVs, with the main focus towards the deposition of the active layer. This includes a comparison of performances at laboratory (<1 cm2), small (1-10 cm2), medium (10-100 cm2), and large (>100 cm2) active area fabrications, encompassing devices that use scalable printing and coating methods for only the active layer, as well as "fully printed/coated" devices. The article also compares the research focus of each of the printing and coating techniques and predicts the general direction that scalable and large-scale OPVs will head towards.

2.11 - Accurate characterization of indoor photovoltaic performance

Ambient energy harvesting has great potential to contribute to sustainable development and address growing environmental challenges. Converting waste energy from energy-intensive processes and systems (e.g. combustion engines and furnaces) is crucial to reducing their environmental impact and achieving net-zero emissions. Compact energy harvesters will also be key to powering the exponentially growing smart devices ecosystem that is part of the Internet of Things, thus enabling futuristic applications that can improve our quality of life (e.g. smart homes, smart cities, smart manufacturing, and smart healthcare). To achieve these goals, innovative materials are needed to efficiently convert ambient energy into electricity through various physical mechanisms, such as the photovoltaic effect, thermoelectricity, piezoelectricity, triboelectricity, and radiofrequency wireless power transfer. By bringing together the perspectives of experts in various types of energy harvesting materials, this Roadmap provides extensive insights into recent advances and present challenges in the field. Additionally, the Roadmap analyses the key performance metrics of these technologies in relation to their ultimate energy conversion limits. Building on these insights, the Roadmap outlines promising directions for future research to fully harness the potential of energy harvesting materials for green energy anytime, anywhere.

Indoor photovoltaic energy harvesting based on semiconducting π-conjugated polymers and oligomeric materials toward future IoT applications

With the advancement of artificial intelligence computing systems that can collect, analyze, and utilize metadata from our activities and surrounding environments, establishing self-powered electronic systems/networks supported by energy harvesters is strongly desired. With the lowering of power consumption in contemporary IoT electronics such as wireless sensors, indoor organic photovoltaic devices (iOPVs), which can be driven under ambient indoor light, have recently attracted significant interest as self-sustainable eco-friendly power sources. iOPVs based on organic semiconductors have unique advantages, such as light weight, flexibility, solution processability, and feasibility of low-temperature mass production. Additionally, the spectral tunability and high optical absorptivity of organic semiconductors make iOPVs more effective as energy harvesters in indoor lighting environments. With recent intensive research effort, iOPVs have realized the delivery of high power conversion efficiencies exceeding 25% with output power densities of several tens to a hundred μW cm−2, which are sufficient to drive various low-power electronics compatible with the IoT. This review article focuses on recent progress in iOPVs based on π-conjugated polymers and oligomeric materials and outlines their fundamental principles and characterization techniques.

Efficient OLEDs Based on Slot-Die-Coated Multicomponent Emissive Layer

The optimization of multicomponent emissive layer (EML) deposition by slot-die coating for organic light-emitting diodes (OLEDs) is presented. In the investigated EMLs, the yellow-green iridium complex (Ir) was doped in two types of host: a commonly used mixture of poly(N-vinylcarbazole) (PVK) with oxadiazole derivative (PBD) or PVK with thermally activated delayed fluorescence-assisted dopant (10-(4-(4,6-diphenyl-1,3,5-triazin-2-yl)phenyl)-10H-spiro[acridine-9,9′-fluorene], SpiroAC-TRZ). In this article, OLEDs with EML prepared in air by slot-die coating, facilitating industrial manufacturing, are confronted with those with spin-coated EML in nitrogen. OLEDs based on PVK:PBD + 2 wt.% Ir-dopant exhibit comparable performance: ~13 cd A⁻¹, regardless of the used method. The highest current efficiency (21 cd A⁻¹) is shown by OLEDs based on spin-coated PVK with 25 wt.% SpiroAC-TRZ and 2 wt.% Ir-dopant. It is three times higher than the efficiency of OLEDs with slot-die-coated EML in air. The performance reduction, connected with the adverse oxygen effect on the energy transfer from TADF to emitter molecules, is minimized by the rapid EML annealing in a nitrogen atmosphere. This post-treatment causes more than a doubling of the OLED efficiency, from 7 cd A⁻¹ to over 15 cd A⁻¹. Such an approach may be easily implemented in other printing techniques and result in a yield enhancement.

Optimizing the Photovoltaic Performance of Organic Solar Cells for Indoor Light Harvesting

Organic solar cells (OSCs) harvesting indoor light are highly promising for emerging technologies, such as Internet of Things. Here, the photovoltaic performance of the PTB7-Th:PC 71 BM solar cells, constructed using "optimized" and "non-optimized" processing conditions, are compared for indoor and outdoor applications. We find that compared to the "optimized" solar cell, the "non-optimized" solar cell is less efficient under simulated solar light illumination (100 mW cm -2 , spectral range 350-1100 nm), due to the significant bimolecular charge carrier recombination losses. However, under simulated indoor illumination (3.28 mW cm -2 , spectral range 400-700 nm), bimolecular recombination is effective suppressed, thus the power conversion efficiency of the "non-optimized" solar cell was increased to 14.7%, higher than that of the "optimized" solar cell (14.2%). These results suggest that the "common" strategy used to optimize the OSCs could be undesired for indoor OSCs. Then, we demonstrate that the difficulty in realizing the desired "morphology" of the active layer for the outdoor OSCs, could be eased for the indoor OSCs, allowing us to realize high-efficiency indoor OSCs using a non-halogenated solvent.

Recent advances in non-fullerene organic photovoltaics enabled by green solvent processing

Solution-processed organic photovoltaic (OPV) as a new energy device has attracted much attention due to its huge potential in future commercial manufacturing. However, so far, most of the studies on high-performance OPV have been treated with halogenated solvents. Halogenated solvents not only pollute the environment, but are also harmful to human health, which will negatively affect the large-scale production of OPV in the future. Therefore, it is urgent to develop low-toxic or non-toxic non-halogen solvent-processable OPV. Compared with conventional fullerene OPVs, non-fullerene OPVs exist with stronger absorption, better-matched energy levels and lower energy loss. Processing photoactive layers with non-fullerenes as the acceptor material has broad potential advantages in non-halogenated solvents. This review introduces the research progress of non-fullerene OPV treated by three different kinds of green solvents as the non-halogenated and aromatic solvent, the non-halogenated and non-aromatic solvent, alcohol and water. Furthermore, the effects of different optimization strategies on the photoelectric performance and stability of non-fullerene OPV are analyzed in detail. The current optimization strategy can increase the power conversion efficiency of non-fullerene OPV processed with non-halogen solvents up to 17.33%, which is close to the performance of processing with halogen-containing solvents. Finally, the commercial potential of non-halogen solvent processing OPVs is discussed. The green solvent processing of non-fullerene-based OPVs will become a key development direction for the future of the OPV industry.

Energy recycling under ambient illumination for internet-of-things using metal/oxide/metal-based colorful organic photovoltaics

Colorful indoor organic photovoltaics (OPVs) have attracted considerable attention in recent years for their autonomous function in internet-of-things (IoT) devices. In this study, a solution-processed TiO₂layer in a metal-oxide-metal (MOM) color filter electrode is used for light energy recycling in P3HT:ICBA-based indoor OPVs. The MOM electrode allows for tuning of the optical cavity mode to maximize photocurrent production by modulating the thickness of the TiO₂layer in the sandwich structure. This approach preserves the OPVs' optoelectronic properties without damaging the photoactive layer and enables them to display a suitable range of vivid colors. The optimized MOM-OPVs demonstrated an excellent power conversion efficiency (PCE) of 8.8% ± 0.2%, which is approximately 20% higher than that of reference opaque OPVs under 1000 lx light emitting diode illumination. This can be attributed to the high photocurrent density due to the nonresonant light reflected from metals into the photoactive layer. Additionally, the proposed MOM-OPVs exhibited high external quantum efficiency and large parasitic shunt resistances, leading to improved fill factor and PCE values. Thus, the study's MOM electrode provides excellent feasibility for realizing colorful and efficient indoor OPVs for IoT applications.

Slot-Die-Coated Ternary Organic Photovoltaics for Indoor Light Recycling

Efficient organic photovoltaics (OPVs) based on slot-die-coated (SD) ternary blends were developed for low-intensity indoor light harvesting. For active layers processed in air and from eco-friendly solvents, our device performances (under 1 sun and low light intensity) are the highest reported values for fluoro-dithiophenyl-benzothiadiazole donor polymer-based OPVs. The N-annulated perylene diimide dimer acceptor was incorporated into a blend of donor polymer (FBT) and fullerene acceptor (PC₆₁BM) to give ternary bulk heterojunction blends. SD ternary-based devices under 1 sun illumination showed enhanced power conversion efficiency (PCE) from 6.8 to 7.7%. We observed enhancement in the short-circuit current density and open-circuit voltage of the devices. Under low light intensity light-emitting device illumination (ca. 2000 lux), the ternary-based devices achieved a PCE of 14.0% and a maximum power density of 79 μW/cm² compared to a PCE of 12.0% and a maximum power density of 68 μW/cm² for binary-based devices. Under the same illumination conditions, the spin-coated (SC) devices showed a PCE of 15.5% and a maximum power density of 88 μW/cm². Collectively, these results demonstrate the exceptional promise of a SD ternary blend system for indoor light harvesting and the need to optimize active layers based on industry-relevant coating approaches toward mini modules.

Organic Photovoltaic Cells for Indoor Applications: Opportunities and Challenges

With the growing development of the Internet of Things, organic photovoltaic (OPV) cells are highly desirable for indoor applications because of the unique features of light weight, flexibility, and coloration. Emission spectra of the commonly used indoor light sources are much narrower with lower light intensity as compared to the standard solar spectrum. High tunability in optical absorption, insensitivity to series resistance and the active layer thickness, and mild operating conditions make indoor OPV cells promising as a practically relevant technology. Currently, the OPV module has obtained a power conversion efficiency of over 20%, with excellent stability under indoor conditions. However, at the present stage, the device physics investigations and material design strategies developed in an OPV cell for indoor applications lag behind those for outdoor applications. In particular, the emerging characterizations in photovoltaic measurements have severely affected the reliability of reports. This Spotlight on Applications highlights these opportunities and challenges of OPV cells for indoor applications and reviews the recent progress in indoor OPV cells. In addition, we summarize some studies related to accurate measurement and provide some recommendations.

Recent progress in indoor organic photovoltaics

Among various potential applications of organic photovoltaics (OPVs), indoor power generation has great potential because of several advantages over outdoor light harvesting under 1 sun conditions. Commonly used indoor light sources have narrower emission spectra with lower intensity (by 3 orders of magnitude) as compared to the solar spectrum. Highly tunable optical absorption, large absorption coefficients, and small leakage currents under dim lighting conditions make OPVs promising candidates for indoor applications. For optimizing indoor photovoltaic materials and devices, several key issues (different from those under 1 sun conditions), such as developing new indoor photovoltaic materials and devices with suitable absorption spectra, large open-circuit voltages with low energy loss, minimized trap-mediated charge recombination and leakage currents, and device stability under indoor conditions, should be considered carefully. In this review, the recent progress in optimization of indoor photovoltaic materials and devices, and the key strategies to optimize the indoor photovoltaic characteristics will be summarized and discussed.