Bionic Preparation of CeO2-Encapsulated Nitrogen Self-Doped Biochars for Highly Efficient Oxygen Reduction

In Situ Symbiosis of Cerium Oxide Nanophase for Enhancing the Oxygen Electrocatalysis Performance of Single-Atom Fe─N─C Catalyst with Prolonged Stability for Zinc-Air Batteries

The Fenton reaction, induced by the H2O2 formed during the oxygen reduction reaction (ORR) process leads to significant dissolution of Fe, resulting in unsatisfactory stability of the iron-nitrogen-doped carbon catalysts (Fe-NC). In this study, a strategy is proposed to improve the ORR catalytic activity while eliminating the effect of H2O2 by introducing CeO2 nanoparticles. Transmission electron microscopy and subsequent characterizations reveal that CeO2 nanoparticles are uniformly distributed on the carbon substrate, with atomically dispersed Fe single-atom catalysts (SACs) adjacent to them. CeO2@Fe-NC achieves a half-wave potential of 0.89 V and a limiting current density of 6.2 mA cm-2, which significantly outperforms Fe-NC and commercial Pt/C. CeO2@Fe-NC also shows a half-wave potential loss of only 1% after 10 000 CV cycles, which is better than that of Fe-NC (7%). Further, H2O2 elimination experiments show that the introduction of CeO2 significantly accelerate the decomposition of H2O2. In situ Raman spectroscopy results suggest that CeO2@Fe-NC significantly facilitates the formation of ORR intermediates compared with Fe-NC. The Zn-air batteries utilizing CeO2@Fe-NC cathodes exhibit satisfactory peak power density and open-circuit voltage. Furthermore, theoretical calculations show that the introduction of CeO2 enhances the ORR activity of Fe-NC SAC. This study provides insights for optimizing SAC-based electrocatalysts with high activity and stability.

A state-of-art review on the redox activity of persistent free radicals in biochar

Biochar-bound persistent free radicals (biochar-PFRs) attract much attention because they can directly or indirectly mediate the transformation of contaminants in large-scale wastewater treatment processes. Despite this, a comprehensive top-down understanding of the redox activity of biochar-PFRs, particularly consumption and regeneration mechanisms, as well as challenges in redox activity assessment, is still lacking. To tackle this challenge, this review outlines the identification and determination methods of biochar-PFRs, which serve as a prerequisite for assessing the redox activity of biochar-PFRs. Recent developments concerning biochar-PFRs are discussed, with a main emphasis on the reaction mechanisms (both non-free radical and free radical pathways) and their effectiveness in removing contaminants. Importantly, the review delves into the mechanism of biochar-PFRs regeneration, triggered by metal cations, reactive oxygen species, and ultraviolet radiations. Furthermore, this review thoroughly explores the dilemma in appraising the redox activity of biochar-PFRs. Components with unpaired electrons (particular defects and metal ions) interfere with biochar-PFRs signals in electron paramagnetic resonance spectra. Scavengers and extractants of biochar-PFRs also inevitably modify the active ingredients of biochar. Based on these analyses, a practical strategy is proposed to precisely determine the redox activity of biochar-PFRs. Finally, the review concludes by presenting current gaps in knowledge and offering suggestions for future research. This comprehensive examination aims to provide new and significant insights into the redox activity of biochar-PFRs.

Rare earth oxide based electrocatalysts: synthesis, properties and applications

As an important strategic resource, rare earths (REs) constitute 17 elements in the periodic table, namely 15 lanthanides (Ln) (La-Lu, atomic numbers from 57 to 71), scandium (Sc, atomic number 21) and yttrium (Y, atomic number 39). In the field of catalysis, the localization and incomplete filling of 4f electrons endow REs with unique physical and chemical properties, including rich electronic energy level structures, variable coordination numbers, etc., making them have great potential in electrocatalysis. Among various RE catalytic materials, rare earth oxide (REO)-based electrocatalysts exhibit excellent performances in electrocatalytic reactions due to their simple preparation process and strong structural variability. At the same time, the electronic orbital structure of REs exhibits excellent electron transfer ability, which can reduce the band gap and energy barrier values of rate-determining steps, further accelerating the electron transfer in the electrocatalytic reaction process; however, there is a lack of systematic review of recent advances in REO-based electrocatalysis. This review systematically summarizes the synthesis, properties and applications of REO-based nanocatalysts and discusses their applications in electrocatalysis in detail. It includes the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), hydrogen oxidation reaction (HOR), oxygen reduction reaction (ORR), carbon dioxide reduction reaction (CO2RR), methanol oxidation reaction (MOR), nitrogen reduction reaction (NRR) and other electrocatalytic reactions and further discusses the catalytic mechanism of REs in the above reactions. This review provides a timely and comprehensive summary of the current progress in the application of RE-based nanomaterials in electrocatalytic reactions and provides reasonable prospects for future electrocatalytic applications of REO-based materials.

Fe-N-C catalysts decorated with oxygen vacancies-rich CeOx to increase oxygen reduction performance for Zn-air batteries

Platinum group metal (PGM)-free catalysts represented by nitrogen and iron co-doped carbon (Fe-N-C) catalysts are desirable and critical for metal-air batteries, but challenges still exist in performance and stability. Here, cerium oxides (CeO_x) are incorporated into a two-dimensional Fe-N-C catalyst (FeNC-Ce-950) via a host-guest strategy. The Ce⁴⁺/Ce³⁺ redox system creates a large number of oxygen vacancies for rapid O₂ adsorption to accelerate the kinetics of oxygen reduction reaction (ORR). Consequently, the as-synthesized FeNC-Ce-950 catalyst exhibits a half-wave potential (E_1/2) of 0.921 V and negligible decay (<2 mV for ΔE_1/2) after 5,000 accelerated durability cycles, significantly outperforming most of ORR catalysts reported in recent years and precious metal counterparts. When applied in a zinc-air battery, it demonstrates a peak power density of 175 mW cm^-2 and a specific capacity of 757 mAh g_Zn^-1. This study also provides a reference for the exploration of Fe-N-C catalysts decorated with variable valence metal oxides.

Apparent activity and specific activity of lanthanides (La, Ce, Nd) decorated Co-MOF derivatives for electrocatalytic water splitting

Lanthanide (Ln) rare Earth (RE) elements are often used to incorporate and regulate the local coordination environment and electronic configuration of transition metal based electrocatalysts for acquiring improved electrocatalytic performance. But for a given pristine electrode, is a Ln element concentrated more on promoting the apparent activity of original electrode or on enhancing its specific activity? To address this issue, Ln (La, Ce and Nd) decorated ZIF-67 derivative electrodes (Ln/Co/NC) were fabricated following with the detailed experimental testing of apparent activity and specific activity of assembled electrodes. X-ray photoelectron spectroscopy data confirmed that Ce, Nd and La have played their own role in regulating the coordination electronic structure of the surface atoms of the derived Co/NC by forming different types of chemical bonds. Electrochemical (EC) results confirmed that Ce is concentrated more on the apparent activity of derived Co/NC electrode with the smallest overpotential at 50 mA cm^-2(η₅₀), while Nd contributes more to its reaction kinetic property with the smallest value of Tafel slope in alkaline hydrogen evolution reaction process. But for oxygen evolution reaction, all of La, Ce and Nd deteriorate the apparent activity of the pristine Co/NC electrode. Comparatively, La shows a greater ability to modulate the specific activity of Co/NC with a larger electrochemical active surface area normalized current density, while Nd exhibits the best ability to re-establish the properties of reaction centers. This work illustrates the difference influence of La, Ce and Nd on the apparent activity and specific activity of the ZIF-67 derivative Co/NC electrode. It will do some favors in engineering RE elements modified composite electrodes for EC applications.

Study on persulfate activated by Ce-modified tea waste biochar to degrade tetracycline

In this study, the Ce-modified tea residue biochar (Ce-TBC) was successfully generated and applied to the biochar/persulfate system (Ce-TBC/PDS), the mechanism of the removal of tetracycline (TC) using Ce-TBC/PDS was elaborated. Under the optimal experimental conditions (Ce-TBC = 0.8 g L^-1, PDS = 4 mM, TC = 10 mg L^-1), the removal efficiency of TC was 91.28%, and after 5 cycles, the elimination rate of Ce-TBC/PDS still reached up to 80%. The mechanism of TC removal by Ce-TBC/PDS was analyzed by scanning electron microscopy (SEM), X-ray diffractometer (XRD), Fourier infrared transform spectrometer (FT-IR), and X-ray photoelectron spectrometer (XPS) characterization, and influence factor experiments. The results showed that the introduction of CeO_x increased the oxygen vacancies on the TBC surface and promoted the interconversion between Ce³⁺ and Ce⁴⁺ for better activation of PDS and generation of active species. Free radical quenching experiments and paramagnetic resonance spectrometry (EPR) analysis showed that the non-radical pathway ¹O₂ played a dominant role in the Ce-TBC/PDS system. The present work provided an efficient means of PDS activator and recycling of tea waste.

Biomass-Based Oxygen Reduction Reaction Catalysts from the Perspective of Ecological Aesthetics—Duckweed Has More Advantages than Soybean

Ecological aesthetics encourages the harmonization of humans and nature. In this paper, we integrate ecological aesthetics into the development of oxygen reduction reaction (ORR) catalysts of H2/O2 fuel cells. Moldy soybean and duckweed as raw materials are adopted to prepare biomass-based ORR catalysts, both of which have advantages in activity, stability, environmental protection and resource richness over the conventional expensive and scarce noble metal-based catalysts. Therefore, duckweed is more environmentally friendly, entails a simpler preparation process and has a better catalytic performance, ultimately being more in line with ecological aesthetics.

Biomimetic synthesis technology for preparation of Fe3O4-encapsulated biochar using in highly efficient peroxodisulfate activation

The background value of iron in red soil is superior, primarily absorbed and homogeneously encapsulated in harvested biomass. However, this property on the high-value utilization of bionic iron-encapsulated biomass remains unknown. In this study, special biochar (Fe@BC) was obtained from this kind of biomass by one-step pyrolysis method, which was further used to activate peroxydisulfate (PDS) and degrade 2,4-dichlorophenol (2,4-DCP). The results showed that Fe₃O₄ was formed and homogeneously embedded in biochar at 500^oC. Comparing to catalysts prepared by impregnation pyrolysis (Fe/BC), Fe@BC exhibited excellent degradation performance (90.9%, k = 0.0037 min⁻¹) for 2,4-DCP. According to the free radicals quenching studies, hydroxyl radicals (·OH) and superoxide radicals (·O₂⁻) were the dominant reactive oxygen species (ROS) in Fe@BC/PDS system. Importantly, a PDS adsorption model was established, and the electron transport and PDS activation in the core-shell structure were demonstrated by DFT calculations. Therefore, this study could supply a high-performance catalyst and significant implications for high-value biomass utilization in red soil.

Metal-Supported Biochar Catalysts for Sustainable Biorefinery, Electrocatalysis and Energy Storage Applications: A Review

Biochar (BCH) is a carbon-based bio-material produced from thermochemical conversion of biomass. Several activation or functionalization methods are usually used to improve physicochemical and functional properties of BCHs. In the context of green and sustainable future development, activated and functionalized biochars with abundant surface functional groups and large surface area can act as effective catalysts or catalyst supports for chemical transformation of a range of bioproducts in biorefineries. Above the well-known BCH applications, their use as adsorbents to remove pollutants are the mostly discussed, although their potential as catalysts or catalyst supports for advanced (electro)catalytic processes has not been comprehensively explored. In this review, the production/activation/functionalization of metal-supported biochar (M-BCH) are scrutinized, giving special emphasis to the metal-functionalized biochar-based (electro)catalysts as promising catalysts for bioenergy and bioproducts production. Their performance in the fields of biorefinery processes, and energy storage and conversion as electrode materials for oxygen and hydrogen evolutions, oxygen reduction, and supercapacitors, are also reviewed and discussed.

Hybrid Biochar/Ceria Nanomaterials: Synthesis, Characterization and Activity Assessment for the Persulfate-Induced Degradation of Antibiotic Sulfamethoxazole

Biochar from spent malt rootlets was employed as the template to synthesize hybrid biochar-ceria materials through a wet impregnation method. The materials were tested for the activation of persulfate (SPS) and subsequent degradation of sulfamethoxazole (SMX), a representative antibiotic, in various matrices. Different calcination temperatures in the range 300-500 °C were employed and the resulting materials were characterized by means of N2 adsorption and potentiometric mass titration as well as TGA, XRD, SEM, FTIR, DRS, and Raman spectroscopy. Calcination temperature affects the biochar content and the physicochemical properties of the hybrid materials, which were tested for the degradation of 500 μg L-1 SMX with SPS (in the range 200-500 mg L-1) in various matrices including ultrapure water (UPW), bottled water, wastewater, and UPW spiked with bicarbonate, chloride, or humic acid. Materials calcined at 300-350 °C, with a surface area of ca. 120 m2 g-1, were the most active, yielding ca. 65% SMX degradation after 120 min of reaction in UPW; materials calcined at higher temperatures as well as bare biochar were less active. Degradation decreased with increasing matrix complexity due to the interactions amongst the surface, the contaminant, and the oxidant. Experiments in the presence of scavengers (i.e., methanol, t-butanol, and sodium azide) revealed that sulfate and hydroxyl radicals as well as singlet oxygen were the main oxidative species.

Enhanced Electrocatalytic Activity of Cobalt-Doped Ceria Embedded on Nitrogen, Sulfur-Doped Reduced Graphene Oxide as an Electrocatalyst for Oxygen Reduction Reaction

N, S-doped rGO was successfully synthesized and embedded Co-doped CeO2 via hydrothermal synthesis. The crystal structure, surface morphology and elemental composition of the prepared catalyst were studied by XRD, Raman spectra, SEM, TEM and XPS analyses. The synthesized electrocatalyst exhibits high onset and halfwave potential during the ORR. This result shows that a combination of N- and S-doped rGO and Co-doped CeO2 leads to a synergistic effect in catalyzing the ORR in alkaline media. Co–CeO2/N, S–rGO displays enhanced ORR performance compared to bare CeO2. The superior stability of the prepared catalyst implies its potential applications beyond fuel cells and metal–air batteries.

Facile preparation and highly efficient sorption of magnetic composite graphene oxide/Fe3O4/GC for uranium removal

In this work, we reported for the first time a novel magnetic composite graphene oxide/Fe3O4/glucose-COOH (GO/Fe3O4/GC) that was facilely prepared from glucose through the hydrothermal carbonization and further combination with graphene oxide (GO). The chemical and structural properties of the samples were investigated. By the batch uranium adsorption experiments, the magnetic composite GO/Fe3O4/GC exhibits an excellent adsorption performance and fast solid-liquid separation for uranium from aqueous solution. GO/Fe3O4/GC (the maximum adsorption capacity (Qm) was 390.70 mg g-1) exhibited excellent adsorption capacity and higher removal rate (> 99%) for U(VI) than those of glucose-COOH (GC) and magnetic GC (MGC). The effect of the coexisting ions, such as Na+, K+, Mg2+, Ca2+, and Al3+, on the U(VI) removal efficiency of GO/Fe3O4/GC was examined. The equilibrium sorption and sorption rate for the as-prepared adsorbents well fit the Langmuir model and pseudo second-order kinetic model, respectively. The thermodynamic parameters (ΔH0 = 11.57 kJ mol-1 and ΔG0 < 0) for GO/Fe3O4/GC indicate that the sorption process of U(VI) was exothermic and spontaneous. Thus, this research provides a facile strategy for the preparation of the magnetic composite with low cost, high efficiency and fast separation for the U(VI) removal from aqueous solution.

Activated biochar derived from peanut shells as the electrode materials with excellent performance in Zinc-air battery and supercapacitance

The use of activated biochar-based electrode derived from waste biomass in energy technologies, such as metal-air batteries and supercapacitors, is an important strategy for realizing energy and environmental sustainability in the future. Herein, peanut shells (waste biomass) were employed to prepare activated biochar materials by pyrolysis in molten KCl and heat-treatment. The effective dispersion and corrosion effects of molten salt for the pyrolysis products during pyrolysis obviously increase defects and specific surface area of the activated biochar materials. The prepared activated biochar material (PS-800-1000) by pyrolysis in molten KCl at 800 °C and heat-treatment at 1000 °C exhibits excellent catalytic activity with half-wave potential of 0.84 V vs. RHE, comparable to commercial Pt/C for oxygen reduction reaction (ORR) in 0.1 M KOH and outstanding supercapacitance performance in 6 M KOH with high specific capacitance (355 F g^-1 at 0.5 A g^-1), which exceeds all reported biochar derived from peanut shells. The PS-800-1000-based zinc-air battery (ZAB) displays higher peak power density (141 mW cm^-2), specific capacity (767 mAh g_Zn^-1) and cycling stability than Pt/C-based ZAB. The activated biochar prepared by pyrolysis in molten KCl and heat-treatment method from peanut shells can be a promising candidate for replacing precious metals in energy conversion/storage devices.

N-Doped porous biocarbon materials derived from soya peptone as efficient electrocatalysts for the ORR

A non-noble metal oxygen reduction catalyst was designed and fabricated via a facile carbonization of soya peptone and ZnCl₂.

Elucidating the Role of Oxide-Oxide/Carbon Interfaces of CuOx-CeO2/C in Boosting Electrocatalytic Performance

Herein, we report the synthesis and bifunctional oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) activities of a CuO_x-CeO₂/C electrocatalyst (EC) with rich oxide-oxide and oxide-carbon interfaces. It not only demonstrates a smaller Tafel slope (65 mV dec^-1) and higher limiting current density (-5.03 mA cm^-2) but also exhibits an onset potential (-0.10 V vs Ag/AgCl) comparable to that of benchmark Pt/C. Besides undergoing the favorable direct four-electron ORR pathway, it unveils a loss of 23% of its initial current after 6 h of a stability test and a negative shift of 4 mV in the half-wave potential after the accelerated durability test compared to the corresponding current loss of 28% and negative shift of 20 mV for Pt/C. It also reveals remarkable OER activity in an alkaline medium with a low onset potential (0.20 V) and a smaller Tafel slope (177 mV dec^-1). The bifunctional ORR/OER activity of CuO_x-CeO₂/C EC can be ascribed to the synergistic effects, its unique structure with enriched oxygen vacancies owing to the presence of Ce⁴⁺/Ce³⁺, robust oxide-oxide and oxide-carbon heterointerfaces, and homogeneous dispersion of oxides over the carbon bed, which facilitates faster electronic conduction.