Solution Blowing Synthesis of Li-Conductive Ceramic Nanofibers

Oriented Crystal Growth of Li0.33La0.557TiO3 Nanowire Induced by One-Dimensional Polymer Sheath toward Rapid Lithium-Ion Transfer

Superionic conductor-based solid-state electrolytes with preferred crystal structures hold great promise for realizing ultrafast lithium-ion (Li+) transfer, which is urgently desired for all-solid-state lithium batteries. However, the precise control of crystal growth of superionic conductors is still challenging since the crystals always spontaneously grow to disordered structures with the lowest internal energy to ensure thermodynamic stability. Herein, a coaxial nanowire with a polyvinylpyrrolidone (PVP) sheath and a Li0.33La0.557TiO3 (LLTO) precursor core (PVP/LLTO-caNW) is prepared through coaxial electrospinning, followed by sintering into LLTO nanowire with an oriented crystal structure (LLTO-caNW). We demonstrate that the one-dimensional PVP sheath as a sacrificial layer generates uniform and the strongest adsorption ability on the (110) phase among different LLTO crystal planes, which induces the crystal to preferentially grow along the c-axis (the fastest Li+ transfer direction) during the nucleation and growth processes. As a result, the prepared LLTO-caNW displays an ultrahigh bulk ionic conductivity of 3.13 × 10-3 S cm-1, exceeding most LLTO crystals and approaching the theoretical conductivity. Meanwhile, the oriented crystal growth imparts to LLTO-caNW significantly reduced grain boundary resistance, and the grain-boundary conductivity reaches up to 1.09 × 10-3 S cm-1. This endows the composite solid electrolyte with high ionic conduction performance and superior cycle stability in the assembled all-solid-state lithium battery.

In Situ Nano-SiO2 Electrospun Polyethylene-Oxide-Based Nano-Fiber Composite Solid Polymer Electrolyte for High-Performance Lithium-Ion Batteries

Polyethylene oxide (PEO)-based composite polymer electrolytes (CPEs) containing in situ SiO₂ fillers are prepared using an electrostatic spinning method at room temperature. Through the in situ hydrolysis of tetraethyl silicate (TEOS), the generated SiO₂ nanospheres are uniformly dispersed in the PEO matrix to form a 3D ceramic network, which enhances the mechanical properties of the electrolyte as a reinforcing phase. The interaction between SiO₂ nanospheres and PEO chains results in chemical bonding with a decrease in the crystallinity of the PEO matrix, as well as the complexation strength of PEO chains with lithium ions during the hydrolysis process. Meanwhile, the addition of SiO₂ nanospheres can disturb the orderliness of PEO chain segments and further suppress the crystallization of the PEO matrix. Therefore, improved mechanical/electrochemical properties can be obtained in the as-spun electrolyte with the unique one-dimensional high-speed ion channels. The electrospun CPE with in situ SiO₂ (10 wt%, ca. 45 nm) has a higher ionic conductivity of 1.03 × 10^-3 S cm^-1 than that of the mechanical blending one. Meanwhile, the upper limit of the electrochemical stability window is up to 5.5 V versus Li⁺/Li, and a lithium-ion migration number can be of up to 0.282 at room temperature. In addition, in situ SiO₂ electrospun CPE achieves a tensile strength of 1.12 MPa, elongation at the break of 488.1%, and it has an excellent plasticity. All in all, it is expected that the electrospun CPE prepared in this study is a promising one for application in an all-solid-state lithium-ion battery (LIB) with a high energy density, long life cycle, and high safety.

Single-Ion Conducting Polymeric Protective Interlayer for Stable Solid Lithium-Metal Batteries

With many reported attempts on fabricating single-ion conducting polymer electrolytes, they still suffer from low ionic conductivity, narrow voltage window, and high cost. Herein, we report an unprecedented approach on improving the cationic transport number (t_Li⁺) of the polymer electrolyte, i.e., single-ion conducting polymeric protective interlayer (SIPPI), which is designed between the conventional polymer electrolyte (PVEC) and Li-metal electrode. Satisfied ionic conductivity (1 mS cm^-1, 30 °C), high t_Li⁺ (0.79), and wide-area voltage stability are realized by coupling the SIPPI with the PVEC electrolyte. Benefiting from this unique design, the Li symmetrical cell with the SIPPI shows stable cycling over 6000 h at 3 mA cm^-2, and the full cell with the SIPPI exhibits stable cycling performance with a capacity retention of 86% over 1000 cycles at 1 C and 25 °C. This incorporated SIPPI on the Li anode presents an alternative strategy for enabling high-energy density, long cycling lifetime, and safe and cost-effective solid-state batteries.

The Research Progress in the Application of Ceramic Nanofibers in Antibacterial Textile Materials

In order to investigate the application effect of ceramic nanofibers in antibacterial textile materials and improve the comprehensive use efficiency of antibacterial textile materials, ceramic nanofibers were introduced firstly and their fabrication methods and specific functions were discussed. Then, the antibacterial textile materials were introduced and their main uses and contributions were discussed. Finally, the application of ceramic nanofibers in antibacterial textile materials was investigated based on CiteSpace software. The results showed that the research on ceramic nanofibers had increased rapidly since 2000. Also, the number of the foreign literature retrieval was about 9,200 at most and 6,300 at least. The number of Chinese literature was about 6,000 at most and 1,000 at least. It can be seen that the current research of ceramic nanofibers is quite mature. But the quantity of the research on ceramic nanofibers in the application of antibacterial materials is relatively small. In the foreign literature retrieval, the number of the literature was about 1,300 at most and about 220 at least. In the Chinese literature retrieval, the number of the literature was about 600 at most and about 30 at least. It can be seen that the current domestic research on the application of ceramic nanofibers in antibacterial textile materials is not mature, but the foreign research is relatively good. The research not only provides a reference for the further research of ceramic nanofibers but also contributes to the improvement of antibacterial textile materials.

Nanoscale interface engineering of inorganic Solid-State electrolytes for High-Performance alkali metal batteries

All-solid-state metal batteries (ASSMBs) have been regarded as the ideal candidate for the next-generation high-energy storage system due to their ultrahigh specific capacity and the lowest redox potential. However, the uncontrollable chemical reactivity during cycling which directly determines the growth behaviour of metal dendrites, the low coulombic efficiency and the safety concerns severely limit their real-world applications.. Crystallographic optimization based on solid-state electrolytes (SSEs) provides an atomic-scale and fundamental solution for the inhibition of dendrite growth in metal anodes, which has attracted widespread attentions. From this perspective, we summarize the recent advance of the crystallographic optimization for various classes of solid-state electrolytes. We highlight the recent experimental findings of crystallographic optimization for a new generation of all-solid-state batteries, including lithium-ion batteries, sodium-ion batteries, magnesium-ion batteries, with the aim of providing a deeper understanding of the crystallographic reactions in ASSMBs. The challenges and prospects for the future design and engineering of crystallographic optimization of SSEs are discussed, providing ideas for further research into crystallographic optimization to improve the performance of rechargeable batteries.

Flexible Ceramic Fibers: Recent Development in Preparation and Application

Flexible ceramic fibers (FCFs) have been developed for various advanced applications due to their superior mechanical flexibility, high temperature resistance, and excellent chemical stability. In this article, we present an overview on the recent progress of FCFs in terms of materials, fabrication methods, and applications. We begin with a brief introduction to FCFs and the materials for preparation of FCFs. After that, various methods for preparation of FCFs are discussed, including centrifugal spinning, electrospinning, solution blow spinning, self-assembly, chemical vapor deposition, atomic layer deposition, and polymer conversion. Recent applications of FCFs in various fields are further illustrated in detail, including thermal insulation, air filtration, water treatment, sound absorption, electromagnetic wave absorption, battery separator, catalytic application, among others. Finally, some perspectives on the future directions and opportunities for the preparation and application of FCFs are highlighted. We envision that this review will provide readers with some meaningful guidance on the preparation of FCFs and inspire them to explore more potential applications.

Novel electroblowing synthesis of tin dioxide and composite tin dioxide/silicon dioxide submicron fibers for cobalt(ii) uptake

Nanoscale SnO2 has many important properties ranging from sorption of metal ions to gas sensing. Using a novel electroblowing method followed by calcination, we synthesized SnO2 and composite SnO2/SiO2 submicron fibers with a Sn : Si molar ratio of 3 : 1. Different calcination temperatures and heating rates produced fibers with varying structures and morphologies. In all the fibers SnO2 was detected by XRD indicating the SnO2/SiO2 fibers to be composite instead of complete mixtures. We studied the Co2+ separation ability of the fibers, since 60Co is a problematic contaminant in nuclear power plant wastewaters. Both SnO2 and SnO2/SiO2 fibers had an excellent Co2+ uptake with their highest uptake/K d values being 99.82%/281 000 mL g-1 and 99.79%/234 000 mL g-1, respectively. Compared to the bare SnO2 fibers, the SiO2 component improved the elasticity and mechanical strength of the composite fibers which is advantageous in dynamic column operation.

Sulfide and Oxide Inorganic Solid Electrolytes for All-Solid-State Li Batteries: A Review

Energy storage materials are finding increasing applications in our daily lives, for devices such as mobile phones and electric vehicles. Current commercial batteries use flammable liquid electrolytes, which are unsafe, toxic, and environmentally unfriendly with low chemical stability. Recently, solid electrolytes have been extensively studied as alternative electrolytes to address these shortcomings. Herein, we report the early history, synthesis and characterization, mechanical properties, and Li+ ion transport mechanisms of inorganic sulfide and oxide electrolytes. Furthermore, we highlight the importance of the fabrication technology and experimental conditions, such as the effects of pressure and operating parameters, on the electrochemical performance of all-solid-state Li batteries. In particular, we emphasize promising electrolyte systems based on sulfides and argyrodites, such as LiPS5Cl and β-Li3PS4, oxide electrolytes, bare and doped Li7La3Zr2O12 garnet, NASICON-type structures, and perovskite electrolyte materials. Moreover, we discuss the present and future challenges that all-solid-state batteries face for large-scale industrial applications.