Perovskite LaCoxMn1-xO3-σ with Tunable Defect and Surface Structures as Cathode Catalysts for Li-O2 Batteries

Electron and surface engineering of Ni2P/MnP4 heterojunction as high performance bifunctional electrocatalyst for amperage-level overall water splitting

Producing hydrogen through electrocatalytic overall water splitting with ampere-level current density is still limited by the high cost and poor stability of electrocatalysts. In this work, a new type Ni2P/MnP4 heterojunction composite material was designed and prepared as bifunctional electrocatalyst. Based on XPS spectra and theoretical calculation, the formation of Ni2P/MnP4 heterojunction successfully modulates the local electronic structure of Ni2P and enhances the ionization of H and Ni by increasing the electron transfer rate. Moreover, the special nanovilli structure and superhydropholic/superaerophobic surface of Ni2P/MnP4 heterojunction accelerates the transfer of electrolyte and gaseous products. Benefiting from these advantages, the as-prepared Ni2P/MnP4/CF not only exhibits superior electrocatalytic performance, which can release 10 mA/cm2 current density with a low overpotential of 69 mV and 247 mV for HER and OER respectively, but also shows admirable stability of continuous overall water splitting to drive 1000 mA/cm2 for 180 h without notable activity degradation. We believe this material possesses outstanding potential for industrial applications, and our strategy may provide a new pathway to design relative materials.

Light Enables the Cathodic Interface Reaction Reversibility in Solid-State Lithium-Oxygen Batteries

Limited triple-phase boundaries arising from the accumulation of solid discharge product(s) in solid-state cathodes (SSCs) pose a challenge to high-property solid-state lithium-oxygen batteries (SSLOBs). Light-assisted SSLOBs have been gradually explored as an ingenious system; however, the fundamental mechanisms of the SSCs interface behavior remain unclear. Here, we discovered that light assistance can enhance the fast inner-sphere charge transfer in SSCs and regulate the discharge products with spherical particles generated via the surface growth model. Moreover, the high photoelectron excitation and transportation capabilities of SSCs can retard cathodic catalytic decay by avoiding structural degradation of the cathode with a reduced charge voltage. The light-induced SSLOBs exhibited excellent stability (170 cycles) with a low discharge-charge polarization overpotential (0.27 V). Furthermore, transparent SSLOBs with exceptional flexibility, mechanical stability, and multiform shapes were fabricated for theory-to-practical applications in sunlight-induced batteries. Our study opens new opportunities for the introduction of solar energy into energy storage systems.

A facile coprecipitation approach for synthesizing LaNi0.5Co0.5O3 as the cathode for a molten-salt lithium-oxygen battery

The cathode of a lithium-oxygen battery (LOB) should be well designed to deliver high catalytic activity and long stability, and to provide sufficient space for accommodating the discharge product. Herein, a facile coprecipitation approach is employed to synthesize LaNi0.5Co0.5O3 (LNCO) perovskite oxide with a low annealing temperature. The assembled LOB exhibits superior electrochemical performance with a low charge overpotential of 0.03-0.05 V in the current density range of 0.1-0.5 mA cm-2. The battery ran stably for 119 cycles at a high coulombic efficiency. The superior performance is ascribed to (i) the high catalytic activity of LNCO towards oxygen reduction/evolution reactions; (ii) the increased temperature enabling fast kinetics; and (iii) the LiNO3-KNO3 molten salt enhancing the stability of the LOB operating at high temperature.

Enhanced Redox Electrocatalysis in High-Entropy Perovskite Fluorides by Tailoring d-p Hybridization

High-entropy catalysts featuring exceptional properties are, in no doubt, playing an increasingly significant role in aprotic lithium-oxygen batteries. Despite extensive effort devoted to tracing the origin of their unparalleled performance, the relationships between multiple active sites and reaction intermediates are still obscure. Here, enlightened by theoretical screening, we tailor a high-entropy perovskite fluoride (KCoMnNiMgZnF3-HEC) with various active sites to overcome the limitations of conventional catalysts in redox process. The entropy effect modulates the d-band center and d orbital occupancy of active centers, which optimizes the d-p hybridization between catalytic sites and key intermediates, enabling a moderate adsorption of LiO2 and thus reinforcing the reaction kinetics. As a result, the Li-O2 battery with KCoMnNiMgZnF3-HEC catalyst delivers a minimal discharge/charge polarization and long-term cycle stability, preceding majority of traditional catalysts reported. These encouraging results provide inspiring insights into the electron manipulation and d orbital structure optimization for advanced electrocatalyst.

Freestanding MOF-Derived Honeycomb-Shape Porous MnOC@CC as an Electrocatalyst for Reversible LiOH Chemistry in Li-O2 Batteries

In rechargeable Li-O₂ batteries, the electrolyte and the electrode are prone to be attacked by aggressive intermediates (O₂^- and LiO₂) and products (Li₂O₂), resulting in low energy efficiency. It has been reported that in the presence of water, the formation of low-activity LiOH is more stable for electrolyte and electrode, effectively reducing the production of parasitic products. However, the reversible formation and decomposition of LiOH catalyzed by solid catalysts is still a challenge. Here, a freestanding metal-organic framework (MOF)-derived honeycomb-shape porous MnOC@CC cathode was prepared for Li-O₂ batteries by in situ growth of urchin-like Mn-MOFs on carbon cloth (CC) and carbonization. The battery with the MnOC@CC cathode exhibits an ultrahigh practical discharge specific capacity of 22,838 mAh g^-1 at 200 mA g^-1, high-rate capability, and more stable cycling, which is superior to the MnOC powder cathode. X-ray diffraction and Fourier transform infrared results identify that the discharge product of the batteries is LiOH rather than highly active Li₂O₂, and no parasitic products were found during operation. The MnOC@CC cathode can induce the formation of flower-like LiOH in the presence of water due to its unique porous structure and directional alignment of Mn-O centers. This work achieves the reversible formation and decomposition of LiOH in the presence of water, offering some insights into the practical application of semiopen Li-O₂ batteries.

Stepping Up the Kinetics of Li-O2 Batteries by Shrinking Down the Li2O2 Granules through Concertedly Enhanced Catalytic Activity and Photoactivity of Se-Doped LaCoO3

Owing to their structural tunability for furnishing high catalytic activity and photoactivity, perovskite oxides are a class of promising materials for high-performance photocathode catalysts in a photoassisted lithium oxygen battery (LOB), which is still in its infancy. Herein, single-crystalline LaCoO3 (LCO) is successfully synthesized through a microwave-assisted approach and selenylated to simultaneously introduce anionic doping and oxygen vacancies, boosting not only the electrocatalytic activity toward reversible Li2O2 formation/decomposition, but also the photoactivity to further reduce the charge/discharge polarization. As a result, LOBs utilizing Se-doped LCO as the photocathode catalyst demonstrate a superior performance under illumination in all aspects of energy efficiency, specific capacity, and cycling stability, ranking among the best reported in the literature for perovskite oxides. The photoenhanced charge kinetics is found to be correlated with the accelerated Li2O2 nucleation with lowered granule size, which is key to both the improved charge/discharge capacity and reversibility. The results underscore the tailoring of perovskite structure to aggrandize both the catalytic activity and photoactivity for concertedly promoting the kinetics of LOBs.

π-Conjugation Induced Anchoring of Ferrocene on Graphdiyne Enable Shuttle-Free Redox Mediation in Lithium-Oxygen Batteries

Soluble redox mediators (RMs), an alternative to conventional solid catalysts, have been considered an effective countermeasure to ameliorate sluggish kinetics in the cathode of a lithium-oxygen battery recently. Nevertheless, the high mobility of RMs leads to serious redox shuttling, which induces an undesired lithium-metal degeneration and RM decomposition during trade-off catalysis against the sustainable operation of batteries. Here, a novel carbon family of graphdiyne matrix is first proposed to decouple the charge-carrying redox property of ferrocene and the shuttle effects. It is demonstrated that a ferrocene-anchored graphdiyne framework can function as stationary RM, not only preserving the redox-mediating capability of ferrocene, but also promoting the local orientated three-dimensional (3D) growth of Li₂ O₂ . As a result, the RM-assisted catalysis in lithium-oxygen battery remains of remarkable efficiency and stability without the depletion of oxidized RMs or lithium degradation, resulting in a significantly enhanced electrochemical performance.

Defect engineering of oxide perovskites for catalysis and energy storage: synthesis of chemistry and materials science

Oxide perovskites have emerged as an important class of materials with important applications in many technological areas, particularly thermocatalysis, electrocatalysis, photocatalysis, and energy storage. However, their implementation faces numerous challenges that are familiar to the chemist and materials scientist. The present work surveys the state-of-the-art by integrating these two viewpoints, focusing on the critical role that defect engineering plays in the design, fabrication, modification, and application of these materials. An extensive review of experimental and simulation studies of the synthesis and performance of oxide perovskites and devices containing these materials is coupled with exposition of the fundamental and applied aspects of defect equilibria. The aim of this approach is to elucidate how these issues can be integrated in order to shed light on the interpretation of the data and what trajectories are suggested by them. This critical examination has revealed a number of areas in which the review can provide a greater understanding. These include considerations of (1) the nature and formation of solid solutions, (2) site filling and stoichiometry, (3) the rationale for the design of defective oxide perovskites, and (4) the complex mechanisms of charge compensation and charge transfer. The review concludes with some proposed strategies to address the challenges in the future development of oxide perovskites and their applications.

Oxygen Vacancy-Rich RuO2-Co3O4 Nanohybrids as Improved Electrocatalysts for Li-O2 Batteries

Lithium oxygen (Li-O₂) batteries have shown great potential as new energy-storage devices due to the high theoretical energy density. However, there are still substantial problems to be solved before practical application, including large overpotential, low energy efficiency, and poor cycle life. Herein, we have successfully synthesized a RuO₂-Co₃O₄ nanohybrid with a rich oxygen vacancy and large specific surface area. The Li-O₂ batteries based on the RuO₂-Co₃O₄ nanohybrid shown obviously reduced overpotential and improved circulatory property, which can cycle stably for more than 100 cycles at a current density of 200 mA g^-1. Experimental results and density function theory calculation prove that the introduction of RuO₂ can increase oxygen vacancy concentration of Co₃O₄ and accelerate the charge transfer. Meanwhile, the hollow and porous structure leads to a large specific surface area about 104.5 m² g^-1, exposing more active sites. Due to the synergistic effect, the catalyst of the RuO₂-Co₃O₄ nanohybrid can significantly reduce the adsorption energy of the LiO₂ intermediate, thereby reducing the overpotential effectively.

Adjusting the Covalency of Metal-Oxygen Bonds in LaCoO3 by Sr and Fe Cation Codoping to Achieve Highly Efficient Electrocatalysts for Aprotic Lithium-Oxygen Batteries

Developing high-efficiency dual-functional catalysts to promote oxygen electrode reactions is critical for achieving high-performance aprotic lithium-oxygen (Li-O₂) batteries. Herein, Sr and Fe cation-codoped LaCoO₃ perovskite (La_0.8Sr_0.2Co_0.8Fe_0.2O_3-σ, LSCFO) porous nanoparticles are fabricated as promising electrocatalysts for Li-O₂ cells. The results demonstrate that the LSCFO-based Li-O₂ batteries exhibit an extremely low overpotential of 0.32 V, ultrahigh specific capacity of 26 833 mA h g^-1, and superior long-term cycling stability (200 cycles at 300 mA g^-1). These prominent performances can be partially attributed to the existence of abundant coordination unsaturated sites caused by oxygen vacancies in LSCFO. Most importantly, density functional theory (DFT) calculations reveal that codoping of Sr and Fe cations in LaCoO₃ results in the increased covalency of Co 3d-O 2p bonds and the transition of Co³⁺ from an ordinary low-spin state to an intermediate-spin state, eventually resulting in the transformation from nonconductor LCO to metallic LSCFO. In addition, based on the theoretical calculations, it is found that the inherent adsorption capability of LSCFO toward the LiO₂ intermediate is reduced due to the increased covalency of Co 3d-O 2p bonds, leading to the formation of large granule-like Li₂O₂, which can be effectively decomposed on the LSCFO surface during the charging process. Notably, this work demonstrates a unique insight into the design of advanced perovskite oxide catalysts via adjusting the covalency of transition-metal-oxygen bonds for high-performance metal-air batteries.

The Influence of Porous Co/CeO1.88-Nitrogen-Doped Carbon Nanorods on the Specific Capacity of Li-O2 Batteries

Li-O₂ batteries are attracting considerable attention as a promising power source for electric vehicles as they have the highest theoretical energy density among reported rechargeable batteries. However, the low energy density and efficiency of Li-O₂ batteries still act as limiting factors in real cell implementations. This study proposes the cathode structure engineering strategy by tuning the thickness of a catalyst layer to enhance the Li-O₂ battery performance. The construction of the Li-O₂ battery with a thinner porous cathode leads less parasitic reactions at the solid electrolyte interface, maximization of the catalyst utilization, and facile transport of oxygen gas into the cathode. A remarkably high specific capacity of 33,009 mAh g^-1 and the extended electrochemical stability for 75 cycles at a 1000 mAh g^-1 limited capacity and 100 mA g^-1 were achieved when using the porous Co/CeO_1.88-nitrogen-doped carbon nanorod cathode. Further, a high discharge capacity of 20,279 mAh g^-1 was also achieved at a relatively higher current density of 300 mA g^-1. This work suggests the ideal cathode structure and the feasibility of the Co/CeO_1.88-nitrogen-doped carbon nanorod as the cathode material, which can minimize the areal cathode catalyst loading and maximize the gravimetric energy density.