Aminomalononitrile-Assisted Multifunctional Antibacterial Coatings

A surface-independent bioglue using photo-crosslinkable benzophenone moiety

Surface coating technology is broadly demanded across various fields, including marine and biomedical materials; therefore, a facile and versatile approach is desired. This study proposed an attractive surface coating strategy using photo-crosslinkable benzophenone (BP) moiety for biomaterials application. BP-containing "bioglue" polymer can effectively crosslink with all kinds of surfaces and biomolecules. Upon exposure to ultraviolet (UV) light, free radical reaction from the BP glue facilitates the immobilization of diverse molecules onto different substrates in a straightforward and user-friendly manner. Through either one-step, mixing the bioglue with targeted biomolecules, or two-step methods, pre-coating the bioglue and then adding targeted biomolecules, polyacrylic acid (PAA), cyclic RGD-containing peptides, and proteins (gelatin, collagen, and fibronectin) were successfully immobilized on substrates. After drying the bioglue, targeted biomolecules can still be immobilized on the surfaces preserving their bioactivity. Cell culture on biomolecule-immobilized surfaces using NIH 3T3 fibroblasts and human bone marrow stem cells (hBMSCs) showed significant improvement of cell adhesion and activity compared to the unmodified control in serum-free media after 24 hours. Furthermore, hBMSCs on the fibronectin-immobilized surface showed an increased calcium deposition after 21 days of osteogenic differentiation, suggesting that the immobilized fibronectin is highly bioactive. Given the straightforward protocol and substrate-independent bioglue, the proposed coating strategy is promising in broad-range fields.

Antibiofilm Activity of Eugenol-Loaded Chitosan Coatings against Common Medical-Device-Contaminating Bacteria

The formation of pathogenic biofilms on medical devices is a major public health concern accounting for over 65% of healthcare-associated infections and causing high infection morbidity, mortality, and a great burden to patients and the healthcare system due to its resistance to treatment. In this study, we developed a chitosan-based antimicrobial coating with embedded mesoporous silica nanoparticles (MSNs) to load and deliver eugenol, an essential oil component, to inhibit the biofilm formation of common bacteria in medical-device-related infections. The eugenol-loaded MSNs were dispersed in a chitosan solution, which was then cross-linked with glutaraldehyde and drop-casted to obtain coatings. The MSNs and coatings were characterized by dynamic light scattering, Brunauer-Emmett-Teller analysis, attenuated-total-reflectance Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, 3D optical profilometry, and scanning electron microscopy. The release behavior of eugenol-loaded MSNs and coatings and the antibiofilm and antimicrobial activity of the coatings against adherent Staphylococcus aureus, methicillin-resistant S. aureus, and Pseudomonas aeruginosa were investigated. Eugenol was released from the MSNs and coatings in aqueous conditions in a controlled manner with an initial low release, followed by a peak release, a decrease, and a plateau. While the chitosan coatings alone or with unloaded MSNs demonstrated limited antimicrobial effects and still supported biofilm formation after 24 h, the coating containing eugenol not only reduced biofilm formation but also killed the majority of the attached bacteria. It also showed biocompatibility in indirect contact with NIH/3T3 fibroblasts and a high percentage of live cells in direct contact. However, further investigations into cell proliferation in direct contact are recommended. The findings indicated that the chitosan-based coating with eugenol-loaded MSNs could be developed into an effective strategy to inhibit biofilm formation on medical devices.

Preparation and Evaluation of Aminomalononitrile-Coated Ca-Sr Metal-Organic Frameworks as Drug Delivery Carriers for Antibacterial Applications

After orthopedic surgery, antibiotics are usually employed to reduce the risk of infection. If it is possible to enhance antimicrobial functionality and incorporate antimicrobial agents into the bone-filling matrix, not only it can promote bone tissue regeneration, but it can also enable localized administration of medication to elevate antibacterial efficacy. Meanwhile, previous studies have shown that calcium and strontium can support the growth of osteoblastic cells and diminish bone resorption or deterioration. In the past few years, metal-organic frameworks (MOFs) have been widely used as drug carriers owing to their characteristic advantages. In this study, a MOF was prepared in an aqueous solution by a simple coprecipitation method with the organic ligand 1,3,5-tricarboxylic benzene (H3BTC) as a linker to form Ca-Sr-MOF. Furthermore, the Ca-Sr-MOF was coated with aminomalononitrile (AMN), which adhered through the electrostatic interactions between H3BTC and AMN. With this MOF (Ca-Sr-AMN-MOF), AMN polymerization reactions can occur in aqueous environments, and a polymer layer was observed on the MOF surface with moderate hydrophilicity. The prepared Ca-Sr-MOF and Ca-Sr-AMN-MOF were characterized by Fourier transform infrared spectroscopy, powder X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, and UV-visible spectroscopy. Finally, tetracycline (TC) was selected as the model drug to measure the drug loading efficiency, release profile, and antibiotic activity. The percent cumulative drug release of TC from Ca-Sr-MOF and Ca-Sr-AMN-MOF was 55.15 and 9.1%, respectively. The antibacterial effectiveness of TC-loaded MOF against Gram-negative Escherichia coli bacteria was evaluated, revealing the remarkable antimicrobial performance of these substances.

Fabrication of Transparent PEGylated Antifouling Coatings via One-Step Pyrogallol Deposition

Antifouling coatings are critical for many biomedical devices. A simple and universal technique used to anchor antifouling polymers is important in order to expand its applications. In this study, we introduced the pyrogallol (PG)-assisted immobilization of poly(ethylene glycol) (PEG) to deposit a thin antifouling layer on biomaterials. Briefly, biomaterials were soaked in a PG/PEG solution and PEG was immobilized onto the biomaterial surfaces via PG polymerization and deposition. The kinetics of PG/PEG deposition started with the deposition of PG on the substrates, followed by the addition of a PEG-rich adlayer. However, prolonged coating added a top-most PG-rich layer, which deteriorated the antifouling efficacy. By controlling the amounts of PG and PEG and the coating time, the PG/PEG coating was able to reduce more than 99% of the adhesion of L929 cells and the adsorption of fibrinogen. The ultrathin (tens of nanometers) and smooth PG/PEG coating was easily deposited onto a wide variety of biomaterials, and the deposition was robust enough to survive harsh sterilization conditions. Furthermore, the coating was highly transparent and allowed most of the UV and Vis light to pass through. The technique has great potential to be applied to biomedical devices that need a transparent antifouling coating, such as intraocular lenses and biosensors.

Acrylonitrile adducts: design, synthesis and biological evaluation as antimicrobial, haemolytic and thrombolytic agent

In this work, five acrylonitrile adducts were screened for antibacterial activity against Gram-positive Bacillus subtilis, Microbial Type Culture Collection and Gene Bank (MTCC 1305) and Gram-negative Escherichia coli (MTCC 443). Synthesis was followed by aza-Michael addition reaction, where the acrylonitrile accepts an electron pair from the respective amines and results in the formation of n-alkyliminobis-propionitrile and n-alkyliminopropionitrile under microwave irradiation. Characterization of the compounds were performed using Fourier Transform Infrared (FTIR), Proton Nuclear Magnetic Resonance (¹H NMR) and Electrospray Ionisation Mass Spectrometry (ESI-MS). The particle size characterization was done by Dynamic Light Scattering (DLS) technique. The antibacterial study showed higher inhibition rate for both Gram-positive and Gram-negative bacteria. The antibacterial ability was found to be dose dependent. The minimum inhibitory concentration against both bacteria were found to be 1, 3, 0.4, 1, 3 µl/ml for E. coli and 6, 6, 0.9, 0.5, 5 µl/ml for B. subtilis. Time-kill kinetics evaluation showed that the adducts possess bacteriostatic action. Further it was evaluated for high-throughput in vitro assays to determine the compatibility of the adducts for drug delivery. The haemolytic and thrombolytic activity was analysed against normal mouse erythrocytes. The haemolytic activity showed prominent results, and thereby projecting this acrylonitrile adducts as potent antimicrobial and haemolytic agent.

Nanoparticle surface stabilizing agents influence antibacterial action

The antibacterial properties of nanoparticles are of particular interest because of their potential to serve as an alternative therapy to combat antimicrobial resistance. Metal nanoparticles such as silver and copper nanoparticles have been investigated for their antibacterial properties. Silver and copper nanoparticles were synthesized with the surface stabilizing agents cetyltrimethylammonium bromide (CTAB, to confer a positive surface charge) and polyvinyl pyrrolidone (PVP, to confer a neutral surface charge). Minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC), and viable plate count assays were used to determine effective doses of silver and copper nanoparticles treatment against Escherichia coli, Staphylococcus aureus and Sphingobacterium multivorum. Results show that CTAB stabilized silver and copper nanoparticles were more effective antibacterial agents than PVP stabilized metal nanoparticles, with MIC values in a range of 0.003 μM to 0.25 μM for CTAB stabilized metal nanoparticles and 0.25 μM to 2 μM for PVP stabilized metal nanoparticles. The recorded MIC and MBC values of the surface stabilized metal nanoparticles show that they can serve as effective antibacterial agents at low doses.

Multivariate Analysis Applied to Microwave-Driven Cyanide Polymerization: A Statistical View of a Complex System

For the first time, chemometrics was applied to the recently reported microwave-driven cyanide polymerization. Fast, easy, robust, low-cost, and green-solvent processes are characteristic of these types of reactions. These economic and environmental benefits, originally inspired by the constraints imposed by plausible prebiotic synthetic conditions, have taken advantage of the development of a new generation of HCN-derived multifunctional materials. HCN-derived polymers present tunable properties by temperature and reaction time. However, the apparently random behavior observed in the evolution of cyanide polymerizations, assisted by microwave radiation over time at different temperatures, leads us to study this highly complex system using multivariate analytical tools to have a proper view of the system. Two components are sufficient to explain between 84 and 98% of the total variance in the data in all principal component analyses. In addition, two components explain more than 91% of the total variance in the data in the case of principal component analysis for categorical data. These consistent statistical results indicate that microwave-driven polymerization is a more robust process than conventional thermal syntheses but also that plausible prebiotic chemistry in alkaline subaerial environments could be more complex than in the aerial part of these systems, presenting a clear example of the "messy chemistry" approach of interest in the research about the origins of life. In addition, the methodology discussed herein could be useful for the data analysis of extraterrestrial samples and for the design of soft materials, in a feedback view between prebiotic chemistry and materials science.

Positively charged membranes for dye/salt separation based on a crossover combination of Mannich reaction and prebiotic chemistry

With the advent of increasingly loose nanofiltration membranes for dye desalination, synthesis methods based on interfacial polymerization and bio-inspired materials such as polydopamine (pDA) have been investigated. However, the long polymerization time of pDA greatly limits the synthesis and application of fast dye/salt separation membranes. In this work, prebiotic chemistry-inspired aminomalononitrile (AMN) was used as a binder to co-deposit the Mannich reaction of tetrakis(hydroxymethyl)phosphonium chloride (THPC) and polyethyleneimine (PEI) to form the positively charged selective layer rapidly. The optimum membrane had a water permeance of 30.7 LMH bar^-1 and a rejection of positively charged Victoria blue B (VBB, 200 ppm) and Na₂SO₄ (1 g/L) of 99.5 % and 9.9 %, respectively. Moreover, the results of a practical application test showed that it had excellent separation performance towards various positively charged dyes and salts. In addition, the actual application test results show that the membrane has good long-term stability during application. In terms of antifouling and antibacterial, the membrane has excellent antibacterial and antifouling properties., Further antibacterial tests were carried out, and the inactivation effect of the membrane on E. coli was also confirmed. The preparation method proposed in this work provides technical support for developing new dye/salt separation membranes.

Semiconducting Soft Submicron Particles from the Microwave-Driven Polymerization of Diaminomaleonitrile

The polymers based on diaminomaleonitrile (DAMN polymers) are a special group within an extensive set of complex substances, namely HCN polymers (DAMN is the formal tetramer of the HCN), which currently present a growing interest in materials science. Recently, the thermal polymerizability of DAMN has been reported, both in an aqueous medium and in bulk, offering the potential for the development of capacitors and biosensors, respectively. In the present work, the polymerization of this plausible prebiotic molecule has been hydrothermally explored using microwave radiation (MWR) via the heating of aqueous DAMN suspensions at 170–190 °C. In this way, polymeric submicron particles derived from DAMN were obtained for the first time. The structural, thermal decomposition, and electrochemical properties were also deeply evaluated. The redox behavior was characterized from DMSO solutions of these highly conjugated macromolecular systems and their potential as semiconductors was described. As a result, new semiconducting polymeric submicron particles were synthetized using a very fast, easy, highly robust, and green-solvent process. These results show a new example of the great potential of the polymerization assisted by MWR associated with the HCN-derived polymers, which has a dual interest both in chemical evolution and as functional materials.

Enhancing the antibacterial property of chitosan through synergistic alkylation and chlorination

Chitosan exhibits moderate antimicrobial properties. Here, we enhanced the antimicrobial properties of chitosan through alkylation and chlorination and evaluated the effect of alkylation on chitosan's hydrophobicity, bacterial attachment, chlorination, biocidal property, and stability. First, chitosan films were prepared through casting and were then immersed in a hexanal solution of different concentrations. The aldehyde groups of hexanal reacted with the amino group in chitosan through a Schiff base reaction. Next, the hexanal-modified chitosan films were soaked in 10 % bleach to form N-halamine. The results demonstrated that the surface became more hydrophobic, and chitosan films with increased hexanal-grafting concentrations exhibited less bacterial attachment. However, the degree of chlorination decreased as the degree of alkylation increased, further reducing the diameter of the zone of inhibition. Nevertheless, all chlorinated samples could kill ~5 log of Staphylococcus aureus and Escherichia coli within 30 min. Unlike previous results for chlorinated chitosan, in this study, alkylation before chlorination enhanced antibacterial properties and bactericidal ability and decelerated the degradation of chlorinated samples. The results of a systematic evaluation indicated that a hexanal-grafting concentration of approximately 80 mM maintains the equilibrium of the various properties of chitosan. Alkylated and chlorinated chitosan has considerable potential application as mask filter layers.

Fabrication of Polysulfobetaine Gradient Coating via Oxidation Polymerization of Pyrogallol To Modulate Biointerfaces

A surface with a gradient physical or chemical feature, such as roughness, hardness, wettability, and chemistry, serves as a powerful platform for high-throughput investigation of cell responses to a biointerface. In this work, we developed a continuous antifouling gradient surface using pyrogallol (PG) chemistry. A copolymer of a zwitterionic monomer, sulfobetaine methacrylate, and an amino monomer, aminoethyl methacrylate, were synthesized (pSBAE) and deposited on glass slides via the deposition of self-polymerized PG. A gradient of pSBAE was fabricated on glass slides in 7 min in the presence of an oxidant, ammonium persulfate, by withdrawing the reaction solution. The modified glass slide showed a wettability gradient, determined by measuring the water contact angle. Cell adhesion and protein adsorption were well correlated with surface wettability. We expect that this simple and faster method for the fabrication of a continuous chemical gradient is applicable for high-throughput screening of surface properties to modulate biointerfaces.

An XPS study of HCN-derived films on pyrite surfaces: a prebiotic chemistry standpoint towards the development of protective coatings

Traditionally, the effect of mineral surfaces on increasing molecular complexity has been considered a major issue in studies about the origin of life. In contrast, herein, the effects of organic films derived from cyanide over an important prebiotic mineral, pyrite, are considered. An XPS spectroscopy study was carried out to understand the surface chemistry of the HCN-derived polymer/pyrite system. As a result, the simulation of a plausible prebiotic alkaline hydrothermal environment led to the identification of an NH₄CN-based film with protective corrosion properties that immediately prevented the oxidation of the highly reactive pyrite surface. In addition, the effect of coating with antioxidant properties was preserved over a relatively long time, and the polymeric film was very stable under ambient conditions. These results increase the great potential of HCN polymers for development as a cheap and easily produced new class of multifunctional polymeric materials that also show promising and attractive insights into prebiotic chemistry.

Alkaline hydrothermal environment led to a NH₄CN-based film with protective corrosion properties on the highly reactive pyrite surface.

A Comprehensive Review of HCN-Derived Polymers

HCN-derived polymers are a heterogeneous group of complex substances synthesized from pure HCN; from its salts; from its oligomers, specifically its trimer and tetramer, amino-nalono-nitrile (AMN) and diamino-maleo-nitrile (DAMN), respectively; or from its hydrolysis products, such as formamide, under a wide range of experimental conditions. The characteristics and properties of HCN-derived polymers depend directly on the synthetic conditions used for their production and, by extension, their potential applications. These puzzling systems have been known mainly in the fields of prebiotic chemistry and in studies on the origins of life and astrobiology since the first prebiotic production of adenine by Oró in the early years of the 1960s. However, the first reference regarding their possible role in prebiotic chemistry was mentioned in the 19th century by Pflüger. Currently, HCN-derived polymers are considered keys in the formation of the first and primeval protometabolic and informational systems, and they may be among the most readily formed organic macromolecules in the solar system. In addition, HCN-derived polymers have attracted a growing interest in materials science due to their potential biomedical applications as coatings and adhesives; they have also been proposed as valuable models for multifunctional materials with emergent properties such as semi-conductivity, ferroelectricity, catalysis and photocatalysis, and heterogeneous organo-synthesis. However, the real structures and the formation pathways of these fascinating substances have not yet been fully elucidated; several models based on either computational approaches or spectroscopic and analytical techniques have endeavored to shed light on their complete nature. In this review, a comprehensive perspective of HCN-derived polymers is presented, taking into account all the aspects indicated above.

Conjugation of Polysulfobetaine via Poly(pyrogallol) Coatings for Improving the Antifouling Efficacy of Biomaterials

Antifouling treatment is critical to certain biomedical devices for their functions and patients' life. Facial, versatile, and universal coating methods to conjugate antifouling materials on a wide variety of biomaterials are beneficial for the fabrication of low-fouling biomedical devices. We developed a simple one-step coating method for surface conjugation of zwitterionic poly(sulfobetaine) via deposition of self-polymerized pyrogallol (PG). Poly(pyrogallol) could deposit copolymers of sulfobetaine methacrylate and aminoethyl methacrylate (pSBAE) on various biomaterials. pSBAE coatings inhibited as high as 99.8% of the adhesion of L929 cells and reduced protein adsorption significantly. The resistance against L929 cell adhesion was increased with increasing coating time and was positively correlated with the surface hydrophilicity and film thickness. Such a coating was robust to resist harsh sterilization conditions and stable for long-term storage in phosphate-buffered saline. We expect that the simple low-fouling pSBAE coating is applicable to the manufacture of medical devices.

Films and Materials Derived from Aminomalononitrile

In recent years major advances in surface chemistry and surface functionalization have been performed through the development, most often inspired by living organisms, of versatile methodologies. Among those, the contact of substrates with aminomalononitrile (AMN) containing solutions at pH = 8.5 allows a conformal coating to be deposited on the surface of all known classes of material. Since AMN is a molecule probably formed in the early atmosphere of our planet and since HCN-based compounds have been detected on many comets and Titan (Saturn’s largest moon) it is likely that such molecules will open a large avenue in surface functionalization mostly for bio-applications. This mini review describes the state of the art of AMN-based coatings from their deposition kinetics, composition, chemical reactivity, hypothetical structure to their first applications as biomaterials. Finally, the AMN-based versatile coatings are compared to other kinds of versatile coating based on catecholamines and polyphenols.

A dual perspective on the microwave-assisted synthesis of HCN polymers towards the chemical evolution and design of functional materials

In this paper, the first study on NH4CN polymerization induced by microwave radiation is described, where a singular kinetic behaviour, especially when this reaction is conducted in the absence of air, is found. As a result, a complex conjugated N-heterocyclic polymer system is obtained, whose properties are very different, and even improved according to morphological features, characterized by their X-ray diffraction patterns and scanning electron microscopy analysis, with respect to those produced under conventional thermal treatment. In addition, a wide variety of relevant bioorganics have been identified, such as amino acids, nucleobases, co-factors, etc., from the synthetized NH4CN polymers. These particular families of polymers are of high interest in the fields of astrobiology and prebiotic chemistry and, more recently, in the development of smart multifunctional materials. From an astrobiological perspective, microwave-driven syntheses may simulate hydrothermal environments, which are considered ideal niches for increasing organic molecular complexity, and eventually as scenarios for an origin of life. From an industrial point of view and for potential applications, a microwave irradiation process leads to a notable decrease in the reaction times, and tune the properties of these new series macromolecular systems. The characteristics found for these materials encourage the development of further systematic research on this alternative HCN polymerization.