Biocompatibility and in Vitro Degradation Behavior of Magnesium–Calcium Alloy Coated with Calcium Phosphate Using an Unconventional Electrolyte

In vitro and in vivo degradation, biocompatibility and bone repair performance of strontium-doped montmorillonite coating on Mg-Ca alloy

Poor bone growth remains a challenge for degradable bone implants. Montmorillonite and strontium were selected as the carrier and bone growth promoting elements to prepare strontium-doped montmorillonite coating on Mg-Ca alloy. The surface morphology and composition were characterized by SEM, EDS, XPS, FT-IR and XRD. The hydrogen evolution experiment and electrochemical test results showed that the Mg-Ca alloy coated with Sr-MMT coating possessed optimal corrosion resistance performance. Furthermore, in vitro studies on cell activity, ALP activity, and cell morphology confirmed that Sr-MMT coating had satisfactory biocompatibility, which can significantly avail the proliferation, differentiation, and adhesion of osteoblasts. Moreover, the results of the 90-day implantation experiment in rats indicated that, the preparation of Sr-MMT coating effectively advanced the biocompatibility and bone repair performance of Mg-Ca alloy. In addition, The Osteogenic ability of Sr-MMT coating may be due to the combined effect of the precipitation of Si4+ and Sr2+ in Sr-MMT coating and the dissolution of Mg2+ and Ca2+ during the degradation of Mg-Ca alloy. By using coating technology, this study provides a late-model strategy for biodegradable Mg alloys with good corrosion resistance, biocompatibility. This new material will bring more possibilities in bone repair.

Biodegradation behavior of micro-arc oxidation coating on magnesium alloy-from a protein perspective

Protein exerts a critical influence on the degradation behavior of absorbable magnesium (Mg)-based implants. However, the interaction mechanism between protein and a micro-arc oxidation (MAO) coating on Mg alloys remains unclear. Hereby, a MAO coating was fabricated on AZ31 Mg alloy. And its degradation behavior in phosphate buffer saline (PBS) containing bovine serum albumin (BSA) was investigated and compared with that of the uncoated alloy. Surface morphologies and chemical compositions were studied using Field-emission scanning electron microscope (FE-SEM), Fourier transform infrared spectrophotometer (FT-IR) and X-ray diffraction (XRD). The degradation behavior of the bare Mg alloy and its MAO coating was studied through electrochemical and hydrogen evolution tests. Cytotoxicity assay was applied to evaluate the biocompatibility of Mg alloy substrate and MAO coating. Results indicated that the presence of BSA decreased the degradation rate of Mg alloy substrate because BSA (RCH(NH₂)COO‾) molecules combined with Mg²⁺ ions to form (RCH(NH₂)COO)₂Mg and thus inhibited the dissolution of Mg(OH)₂ by impeding the attack of Cl‾ ions. In the case of MAO coated Mg alloy, the adsorption of BSA on MAO coating and the formation of (RCH(NH₂)COO)₂Mg exhibited a synergistic effect and enhanced the corrosion resistance of the coated alloy significantly. Furthermore, cell bioactive assay suggested that the MAO coating had good viability for MG63 cells due to its high surface area.

•

BSA reduces degradation of Mg substrate due to the formation of (RCH(NH₂)COO)₂Mg.

•

BSA inhibits degradation of MAO coating by acting as a protective layer.

•

MAO coating promotes cell proliferation due to higher surface area.

•

Cells were rounded shaped on MAO coating owing to the rough surface.

In Vitro and in Vivo Degradation Behavior and Biocompatibility Evaluation of Microarc Oxidation-Fluoridated Hydroxyapatite-Coated Mg-Zn-Zr-Sr Alloy for Bone Application

Magnesium and its alloys are biodegradable materials with great potential for biomedical development; however, their high rate of degradation in biological environments limits the widespread application of these materials. In order to improve the corrosion resistance of magnesium alloy, a functional calcium phosphate coating was prepared on Mg-3Zn-0.5Zr-0.5Sr alloy by microarc oxidation (MAO) combined with chemical deposition of fluoridated hydroxyapatite (FHA). A dense calcium-phosphorus coating 6 μm thick composed of needle-shaped fluoridated hydroxyapatite formed on the surface of the MAO layer. The MAO-FHA coating exhibited good mineralization ability to induce hydroxyapatite deposition on its surface during degradation testing in simulated bodily fluids.

Mechanical and in vitro degradation behavior of magnesium-bioactive glass composites prepared by SPS for biomedical applications

In order to make magnesium (Mg) a successful candidate for fracture fixation devices, it is imperative to control the corrosion rate and enhance its elastic modulus. In the present work, we have prepared bioactive glass (BG) reinforced magnesium composite using spark plasma sintering (SPS). Simultaneous application of heat and pressure during SPS decreased the softening point of BG (600°C), allowing it to coat the Mg particles partially. As a result, BG was found along the Mg particle boundaries, which was confirmed by elemental mapping. Addition of BG improved microhardness and elastic modulus of Mg-BG composites. Corrosion behavior was studied by hydrogen evolution and immersion corrosion in phosphate buffered saline (PBS). After 64 h of immersion, Mg-10 wt % BG composite showed highest corrosion resistance. Quantitative micro-computed tomography (micro-CT) results indicated porosity increase in Mg-BG composites during immersion. The maximum increase in porosity (1.66%) was noticed for pure Mg while the minimum for Mg-10 wt % BG composite. MG63 cell-material interactions, using extract method, showed good cytocompatibility for Mg-10 wt % BG composite. The concentration of Mg ion in cell culture media was measured using atomic absorption spectroscopy after 24 h immersion of Mg/BG composites. The results indicated that using BG as reinforcement and SPS as sintering method; we can prepare corrosion resistant and high modulus Mg-BG composites that can be used for fabricating bone fracture fixation plates. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 107B: 352-365, 2019.

Electrochemical surface engineering of magnesium metal by plasma electrolytic oxidation and calcium phosphate deposition: biocompatibility and in vitro degradation studies

In this study, the surface of magnesium metal was electrochemically engineered for enhanced biocompatibility and controlled degradation in body fluid. Firstly, a plasma electrolytic oxidation (PEO) coating was formed on magnesium, followed by electrochemical deposition of calcium phosphate (CaP) using an unconventional electrolyte. Cytocompatibility tests using L929 cells revealed that the PEO-CaP coating significantly improved the biocompatibility of magnesium. In vitro electrochemical degradation experiments in simulated body fluid (SBF) showed that the PEO-CaP coating improved the degradation resistance of magnesium significantly. The corrosion current density (i_corr) of the PEO-CaP coated magnesium was ∼99% and ∼97% lower than that of bare magnesium and the PEO-only coated magnesium, respectively. Similarly, electrochemical impedance spectroscopy (EIS) results showed that the polarisation resistance (R_P) of the PEO-CaP coated magnesium was one-order of magnitude higher as compared to the PEO-only coated magnesium and two-orders of magnitude higher than the bare magnesium, after 72 h immersion in SBF. Scanning electron microscopy (SEM) analysis revealed no localized degradation in the PEO-CaP coated magnesium. The study demonstrated that the PEO-CaP coating is a promising combination for enhancing the biocompatibility and reducing the degradation of magnesium for potential biodegradable implant applications.

The PEO-CaP coating produced on magnesium metal using an unconventional electrolyte enhanced the degradation resistance and provided excellent cytocompatibility.