Three-Dimensional Microfibrous Bundle Structure Fabricated Using an Electric Field-Assisted/Cell Printing Process for Muscle Tissue Regeneration

Gel-Based Suspension Medium Used in 3D Bioprinting for Constructing Tissue/Organ Analogs

Constructing tissue/organ analogs with natural structures and cell types in vitro offers a valuable strategy for the in situ repair of damaged tissues/organs. Three-dimensional (3D) bioprinting is a flexible method for fabricating these analogs. However, extrusion-based 3D bioprinting faces the challenge of balancing the use of soft bioinks with the need for high-fidelity geometric shapes. To address these challenges, recent advancements have introduced various suspension mediums based on gelatin, agarose, and gellan gum microgels. The emergence of these gel-based suspension mediums has significantly advanced the fabrication of tissue/organ constructs using 3D bioprinting. They effectively stabilize and support soft bioinks, enabling the formation of complex spatial geometries. Moreover, they provide a stable, cell-friendly environment that maximizes cell viability during the printing process. This minireview will summarize the properties, preparation methods, and potential applications of gel-based suspension mediums in constructing tissue/organ analogs, while also addressing current challenges and providing an outlook on the future of 3D bioprinting.

Light-based 3D bioprinting technology applied to repair and regeneration of different tissues: A rational proposal for biomedical applications

3D bioprinting technology, a subset of 3D printing technology, is currently witnessing widespread utilization in tissue repair and regeneration endeavors. In particular, light-based 3D bioprinting technology has garnered significant interest and favor. Central to its successful implementation lies the judicious selection of photosensitive polymers. Moreover, by fine-tuning parameters such as light irradiation time, choice of photoinitiators and crosslinkers, and their concentrations, the properties of the scaffolds can be tailored to suit the specific requirements of the targeted tissue repair sites. In this comprehensive review, we provide an overview of commonly utilized bio-inks suitable for light-based 3D bioprinting, delving into the distinctive characteristics of each material. Furthermore, we delineate strategies for bio-ink selection tailored to diverse repair locations, alongside methods for optimizing printing parameters. Ultimately, we present a coherent synthesis aimed at enhancing the practical application of light-based 3D bioprinting technology in tissue engineering, while also addressing current challenges and future prospects.

Biofabrication's Contribution to the Evolution of Cultured Meat

Cultured Meat (CM) is a growing field in cellular agriculture, driven by the environmental impact of conventional meat production, which contributes to climate change and occupies ≈70% of arable land. As demand for meat alternatives rises, research in this area expands. CM production relies on tissue engineering techniques, where a limited number of animal cells are cultured in vitro and processed to create meat-like tissue comprising muscle and adipose components. Currently, CM is primarily produced on a small scale in pilot facilities. Producing a large cell mass based on suitable cell sources and bioreactors remains challenging. Advanced manufacturing methods and innovative materials are required to subsequently process this cell mass into CM products on a large scale. Consequently, CM is closely linked with biofabrication, a suite of technologies for precisely arranging cellular aggregates and cell-material composites to construct specific structures, often using robotics. This review provides insights into contemporary biomedical biofabrication technologies, focusing on significant advancements in muscle and adipose tissue biofabrication for CM production. Novel materials for biofabricating CM are also discussed, emphasizing their edibility and incorporation of healthful components. Finally, initial studies on biofabricated CM are examined, addressing current limitations and future challenges for large-scale production.

Bioprinting: From Technique to Application in Tissue Engineering and Regenerative Medicine

Among the different approaches present in regenerative medicine and tissue engineering, the one that has attracted the most interest in recent years is the possibility of printing functional biological tissues. Bioprinting is a technique that has been applied to create cellularized three-dimensional structures that mimic biological tissues and thus allow their replacement. Hydrogels are interesting materials for this type of technique. Hydrogels based on natural polymers are known due to their biocompatible properties, in addition to being attractive biomaterials for cell encapsulation. They provide a threedimensional aqueous environment with biologically relevant chemical and physical signals, mimicking the natural environment of the extracellular matrix (ECM). Bioinks are ink formulations that allow the printing of living cells. The controlled deposition of biomaterials by bioinks needs to maintain cell viability and offer specific biochemical and physical stimuli capable of guiding cell migration, proliferation, and differentiation. In this work, we analyze the theoretical and practical issues of bioprinting, citing currently used methods, their advantages, and limitations. We present some important molecules that have been used to compose bioinks, as well as the cellular responses that have been observed in different tissues. Finally, we indicate future perspectives of the method.

Highly Bioactive Cell-laden Hydrogel Constructs Bioprinted Using an Emulsion Bioink for Tissue Engineering Applications

The insufficient pore structure of cell-laden hydrogel scaffolds has limited their application in various tissue regeneration applications owing to low cell-to-cell/matrix interactions and low transfer of nutrients and metabolic wastes. Herein, we designed a highly porous cell-laden hydrogel scaffold fabricated using an emulsion bioink consisting of methacrylated collagen (CMA), mineral oil (MO), and human adipose stem cells (hASCs) to induce efficient cell infiltration and cellular activities. By selecting the most appropriate concentration of CMA and MO, the emulsion bioink can be successfully formulated with proper yield stress and printability. The cell-laden scaffold exhibited significantly greater cell growth and cytoskeletal reorganization than the normally printed cell-laden CMA scaffold. Furthermore, two bioactive components (kartogenin and bone morphogenetic protein 2) were physically encapsulated in the oil droplets of the cell construct, and the molecules in the cell constructs enhanced chondrogenic or osteogenic differentiation of hASCs in the printed structure. Based on these results, the cell-printed structure using an emulsion bioink can not only provide a good cellular microenvironment but also be a new potential method to accelerate stem cell differentiation by combining bioactive molecules and cell-laden scaffolds.

Bioinks and Bioprinting Strategies for Skeletal Muscle Tissue Engineering

Skeletal muscles play important roles in critical body functions and their injury or disease can lead to limitation of mobility and loss of independence. Current treatments result in variable functional recovery, while reconstructive surgery, as the gold-standard approach, is limited due to donor shortage, donor-site morbidity, and limited functional recovery. Skeletal muscle tissue engineering (SMTE) has generated enthusiasm as an alternative solution for treatment of injured tissue and serves as a functional disease model. Recently, bioprinting has emerged as a promising tool for recapitulating the complex and highly organized architecture of skeletal muscles at clinically relevant sizes. Here, skeletal muscle physiology, muscle regeneration following injury, and current treatments following muscle loss are discussed, and then bioprinting strategies implemented for SMTE are critically reviewed. Subsequently, recent advancements that have led to improvement of bioprinting strategies to construct large muscle structures, boost myogenesis in vitro and in vivo, and enhance tissue integration are discussed. Bioinks for muscle bioprinting, as an essential part of any bioprinting strategy, are discussed, and their benefits, limitations, and areas to be improved are highlighted. Finally, the directions the field should expand to make bioprinting strategies more translational and overcome the clinical unmet needs are discussed.

Hydrogel-Based Fiber Biofabrication Techniques for Skeletal Muscle Tissue Engineering

The functional capabilities of skeletal muscle are strongly correlated with its well-arranged microstructure, consisting of parallelly aligned myotubes. In case of extensive muscle loss, the endogenous regenerative capacity is hindered by scar tissue formation, which compromises the native muscle structure, ultimately leading to severe functional impairment. To address such an issue, skeletal muscle tissue engineering (SMTE) attempts to fabricate in vitro bioartificial muscle tissue constructs to assist and accelerate the regeneration process. Due to its dynamic nature, SMTE strategies must employ suitable biomaterials (combined with muscle progenitors) and proper 3D architectures. In light of this, 3D fiber-based strategies are gaining increasing interest for the generation of hydrogel microfibers as advanced skeletal muscle constructs. Indeed, hydrogels possess exceptional biomimetic properties, while the fiber-shaped morphology allows for the creation of geometrical cues to guarantee proper myoblast alignment. In this review, we summarize commonly used hydrogels in SMTE and their main properties, and we discuss the first efforts to engineer hydrogels to guide myoblast anisotropic orientation. Then, we focus on presenting the main hydrogel fiber-based techniques for SMTE, including molding, electrospinning, 3D bioprinting, extrusion, and microfluidic spinning. Furthermore, we describe the effect of external stimulation (i.e., mechanical and electrical) on such constructs and the application of hydrogel fiber-based methods on recapitulating complex skeletal muscle tissue interfaces. Finally, we discuss the future developments in the application of hydrogel microfibers for SMTE.

Replace and repair: Biomimetic bioprinting for effective muscle engineering

The debilitating effects of muscle damage, either through ischemic injury or volumetric muscle loss (VML), can have significant impacts on patients, and yet there are few effective treatments. This challenge arises when function is degraded due to significant amounts of skeletal muscle loss, beyond the regenerative ability of endogenous repair mechanisms. Currently available surgical interventions for VML are quite invasive and cannot typically restore function adequately. In response to this, many new bioengineering studies implicate 3D bioprinting as a viable option. Bioprinting for VML repair includes three distinct phases: printing and seeding, growth and maturation, and implantation and application. Although this 3D bioprinting technology has existed for several decades, the advent of more advanced and novel printing techniques has brought us closer to clinical applications. Recent studies have overcome previous limitations in diffusion distance with novel microchannel construct architectures and improved myotubule alignment with highly biomimetic nanostructures. These structures may also enhance angiogenic and nervous ingrowth post-implantation, though further research to improve these parameters has been limited. Inclusion of neural cells has also shown to improve myoblast maturation and development of neuromuscular junctions, bringing us one step closer to functional, implantable skeletal muscle constructs. Given the current state of skeletal muscle 3D bioprinting, the most pressing future avenues of research include furthering our understanding of the physical and biochemical mechanisms of myotube development and expanding our control over macroscopic and microscopic construct structures. Further to this, current investigation needs to be expanded from immunocompromised rodent and murine myoblast models to more clinically applicable human cell lines as we move closer to viable therapeutic implementation.

Towards bioengineered skeletal muscle: recent developments in vitro and in vivo

Skeletal muscle is a functional tissue that accounts for approximately 40% of the human body mass. It has remarkable regenerative potential, however, trauma and volumetric muscle loss, progressive disease and aging can lead to significant muscle loss that the body cannot recover from. Clinical approaches to address this range from free-flap transfer for traumatic events involving volumetric muscle loss, to myoblast transplantation and gene therapy to replace muscle loss due to sarcopenia and hereditary neuromuscular disorders, however, these interventions are often inadequate. The adoption of engineering paradigms, in particular materials engineering and materials/tissue interfacing in biology and medicine, has given rise to the rapidly growing, multidisciplinary field of bioengineering. These methods have facilitated the development of new biomaterials that sustain cell growth and differentiation based on bionic biomimicry in naturally occurring and synthetic hydrogels and polymers, as well as additive fabrication methods to generate scaffolds that go some way to replicate the structural features of skeletal muscle. Recent advances in biofabrication techniques have resulted in significant improvements to some of these techniques and have also offered promising alternatives for the engineering of living muscle constructs ex vivo to address the loss of significant areas of muscle. This review highlights current research in this area and discusses the next steps required towards making muscle biofabrication a clinical reality.

3D Electrospun Nanofiber-Based Scaffolds: From Preparations and Properties to Tissue Regeneration Applications

Electrospun nanofibers have been frequently used for tissue engineering due to their morphological similarities with the extracellular matrix (ECM) and tunable chemical and physical properties for regulating cell behaviors and functions. However, most of the existing electrospun nanofibers have a closely packed two-dimensional (2D) membrane with the intrinsic shortcomings of limited cellular infiltration, restricted nutrition diffusion, and unsatisfied thickness. Three-dimensional (3D) electrospun nanofiber-based scaffolds can provide stem cells with 3D microenvironments and biomimetic fibrous structures. Thus, they have been demonstrated to be good candidates for in vivo repair of different tissues. This review summarizes the recent developments in 3D electrospun nanofiber-based scaffolds (ENF-S) for tissue engineering. Three types of 3D ENF-S fabricated using different approaches classified into electrospun nanofiber 3D scaffolds, electrospun nanofiber/hydrogel composite 3D scaffolds, and electrospun nanofiber/porous matrix composite 3D scaffolds are discussed. New functions for these 3D ENF-S and properties, such as facilitated cell infiltration, 3D fibrous architecture, enhanced mechanical properties, and tunable degradability, meeting the requirements of tissue engineering scaffolds were discovered. The applications of 3D ENF-S in cartilage, bone, tendon, ligament, skeletal muscle, nerve, and cardiac tissue regeneration are then presented with a discussion of current challenges and future directions. Finally, we give summaries and future perspectives of 3D ENF-S in tissue engineering and clinical transformation.

Promoting endogenous repair of skeletal muscle using regenerative biomaterials

Skeletal muscles normally have a remarkable ability to repair themselves; however, large muscle injuries and several myopathies diminish this ability leading to permanent loss of function. No clinical therapy yet exists that reliably restores muscle integrity and function following severe injury. Consequently, numerous tissue engineering techniques, both acellular and with cells, are being investigated to enhance muscle regeneration. Biomaterials are an essential part of these techniques as they can present physical and biochemical signals that augment the repair process. Successful tissue engineering strategies require regenerative biomaterials that either actively promote endogenous muscle repair or create an environment supportive of regeneration. This review will discuss several acellular biomaterial strategies for skeletal muscle regeneration with a focus on those under investigation in vivo. This includes materials that release bioactive molecules, biomimetic materials and immunomodulatory materials.

Bioinks for 3D Bioprinting: A Scientometric Analysis of Two Decades of Progress

This scientometric analysis of 393 original papers published from January 2000 to June 2019 describes the development and use of bioinks for 3D bioprinting. The main trends for bioink applications and the primary considerations guiding the selection and design of current bioink components (i.e., cell types, hydrogels, and additives) were reviewed. The cost, availability, practicality, and basic biological considerations (e.g., cytocompatibility and cell attachment) are the most popular parameters guiding bioink use and development. Today, extrusion bioprinting is the most widely used bioprinting technique. The most reported use of bioinks is the generic characterization of bioink formulations or bioprinting technologies (32%), followed by cartilage bioprinting applications (16%). Similarly, the cell-type choice is mostly generic, as cells are typically used as models to assess bioink formulations or new bioprinting methodologies rather than to fabricate specific tissues. The cell-binding motif arginine-glycine-aspartate is the most common bioink additive. Many articles reported the development of advanced functional bioinks for specific biomedical applications; however, most bioinks remain the basic compositions that meet the simple criteria: Manufacturability and essential biological performance. Alginate and gelatin methacryloyl are the most popular hydrogels that meet these criteria. Our analysis suggests that present-day bioinks still represent a stage of emergence of bioprinting technology.

Recent progress in extrusion 3D bioprinting of hydrogel biomaterials for tissue regeneration: a comprehensive review with focus on advanced fabrication techniques

Over the last decade, 3D bioprinting has received immense attention from research communities to bridge the divergence between artificially engineered tissue constructs and native tissues.

Silkworm Silk Fiber Bundles as Improved In Vitro Scaffolds for Skeletal Muscle

To mimic skeletal muscle tissues in vitro, native and transgenic spider silk/silkworm silks were seeded with C2C12 myoblasts to observe if these three-dimensional substrates are preferable to a traditional two-dimensional polystyrene cell culture surface. Silks were wound around an acrylic chassis to produce a novel, three-dimensional cell culture device with suspended muscle fibers that genetically and morphologically resemble native skeletal muscle tissue. The transgenic spider silk/silkworm silk has never before been studied for this application. Genetic expression verified skeletal muscle lineage and differentiation, while fluorescent imaging verified contractile protein synthesis. Genetic analysis also revealed an increase in expression of the Myh2 contractile protein gene on silkworm silks, particularly on the transgenic silk. Mechanical properties and protein secondary structure content of the silks indicated correlation between substrate properties and Myh2 gene expression. This increase in contractile protein gene expression suggests that biologically derived silk substrates that are suspended may be a preferable substrate for in vitro muscle modeling because of the proteinaceous character and mechanical flexibility of the silk.

3D Bioprinting in Skeletal Muscle Tissue Engineering

Skeletal muscle tissue engineering (SMTE) aims at repairing defective skeletal muscles. Until now, numerous developments are made in SMTE; however, it is still challenging to recapitulate the complexity of muscles with current methods of fabrication. Here, after a brief description of the anatomy of skeletal muscle and a short state-of-the-art on developments made in SMTE with "conventional methods," the use of 3D bioprinting as a new tool for SMTE is in focus. The current bioprinting methods are discussed, and an overview of the bioink formulations and properties used in 3D bioprinting is provided. Finally, different advances made in SMTE by 3D bioprinting are highlighted, and future needs and a short perspective are provided.

Micropatterned Cell Orientation of Cyanobacterial Liquid-Crystalline Hydrogels

Control of cell extension direction is crucial for the regeneration of tissues, which are generally composed of oriented molecules. The scaffolds of highly oriented liquid crystalline polymer chains were fabricated by casting cyanobacterial mega-saccharides, sacran, on parallel-aligned micrometer bars of polystyrene (PS). Polarized microscopy revealed that the orientation was in transverse direction to the longitudinal axes of the PS bars. Swelling behavior of the micropatterned hydrogels was dependent on the distance between the PS bars. The mechanical properties of these scaffolds were dependent on the structural orientation; additionally, the Young's moduli in the transverse direction were higher than those in the parallel direction to the major axes of the PS bars. Further, fibroblast L929 cells were cultivated on the oriented scaffolds to be aligned along the orientation axis. L929 cells cultured on these scaffolds exhibited uniaxial elongation.

Anisotropically Aligned Cell-Laden Nanofibrous Bundle Fabricated via Cell Electrospinning to Regenerate Skeletal Muscle Tissue

For muscle regeneration, a uniaxially arranged micropattern is important to mimic the structure of the natural extracellular matrix. Recently, cell electrospinning (CE) has been tested to fabricate cell-laden fibrous structures by embedding cells directly into micro/nanofibers. Although homogenous cell distribution and a reasonable cell viability of the cell-laden fibrous structure fabricated using the CE process are achieved, unique topographical cues formed by an aligned fibrous structure have not been applied. In this study, a CE process to achieve not only homogeneous cell distribution with a high cell viability, but also highly aligned cells, which are guided by aligned alginate fibers is employed. To attain the aligned cell-laden fibrous structure, various processing conditions are examined. The selected condition is applied using C2C12 myoblast cells to ensure the biocompatibility and guidance of cell elongation and alignment. As a control, a cell-printed scaffold using a 3D bioprinter is used to compare the efficiency of cell alignment and differentiation of myoblasts. Highly arranged, multinucleated cell morphology is confirmed in the CE scaffold, which successively facilitates myogenic differentiation. It is believed that this study will be a new platform for obtaining cell alignment and will significantly benefit the efforts on muscle regeneration.