High-Performance Acellular Tissue Scaffold Combined with Hydrogel Polymers for Regenerative Medicine

3D Printing of Polysaccharide-Based Hydrogel Scaffolds for Tissue Engineering Applications: A Review

In tissue engineering, 3D printing represents a versatile technology employing inks to construct three-dimensional living structures, mimicking natural biological systems. This technology efficiently translates digital blueprints into highly reproducible 3D objects. Recent advances have expanded 3D printing applications, allowing for the fabrication of diverse anatomical components, including engineered functional tissues and organs. The development of printable inks, which incorporate macromolecules, enzymes, cells, and growth factors, is advancing with the aim of restoring damaged tissues and organs. Polysaccharides, recognized for their intrinsic resemblance to components of the extracellular matrix have garnered significant attention in the field of tissue engineering. This review explores diverse 3D printing techniques, outlining distinctive features that should characterize scaffolds used as ideal matrices in tissue engineering. A detailed investigation into the properties and roles of polysaccharides in tissue engineering is highlighted. The review also culminates in a profound exploration of 3D polysaccharide-based hydrogel applications, focusing on recent breakthroughs in regenerating different tissues such as skin, bone, cartilage, heart, nerve, vasculature, and skeletal muscle. It further addresses challenges and prospective directions in 3D printing hydrogels based on polysaccharides, paving the way for innovative research to fabricate functional tissues, enhancing patient care, and improving quality of life.

Enhancing the mechanical properties of hydrogels with vinyl-functionalized nanocrystalline cellulose as a green crosslinker

Hydrogels have gained significant attention in scientific communities for their versatile applications, but several challenges need to be addressed to exploit their potential fully. Conventional hydrogels suffer from poor mechanical strength, limiting their use in many applications. Moreover, the crosslinking agents used to produce them are often toxic, carcinogenic, and not bio-friendly. This study presents a novel approach to overcome these limitations by using bio-friendly modified nanocrystalline cellulose as a crosslinker to prepare highly stretchable and tough thermosensitive hydrogels. The surface of nanocrystalline cellulose was modified with 3-methacryloxypropyltrimethoxysilane (MPTS) to obtain modified nanocrystalline cellulose (M-NCC) crosslinker and used during free radical polymerization of thermosensitiveN-isopropyl acrylamide (NIPA) monomer to synthesize NIPA/M-NCC hydrogel. The resulting nanocomposite hydrogels exhibit superior mechanical, thermal, and temperature-responsive swelling properties compared to conventional hydrogels prepared with traditional bi-functionalN,N'-methylene bis (acrylamide) (MBA) as a crosslinker. The elongation at break, tensile strength, and toughness of the NIPA/M-NCC hydrogels significantly increase and Young's modulus decrease than conventional hydrogel. The designed M-NCC crosslinker could be utilized to improve the mechanical strength of any polymeric elastomer or hydrogel systems produced through chain polymerization.

Whole Liver Derived Acellular Extracellular Matrix for Bioengineering of Liver Constructs: An Updated Review

Biomaterial templates play a critical role in establishing and bioinstructing three-dimensional cellular growth, proliferation and spatial morphogenetic processes that culminate in the development of physiologically relevant in vitro liver models. Various natural and synthetic polymeric biomaterials are currently available to construct biomimetic cell culture environments to investigate hepatic cell-matrix interactions, drug response assessment, toxicity, and disease mechanisms. One specific class of natural biomaterials consists of the decellularized liver extracellular matrix (dECM) derived from xenogeneic or allogeneic sources, which is rich in bioconstituents essential for the ultrastructural stability, function, repair, and regeneration of tissues/organs. Considering the significance of the key design blueprints of organ-specific acellular substrates for physiologically active graft reconstruction, herein we showcased the latest updates in the field of liver decellularization-recellularization technologies. Overall, this review highlights the potential of acellular matrix as a promising biomaterial in light of recent advances in the preparation of liver-specific whole organ scaffolds. The review concludes with a discussion of the challenges and future prospects of liver-specific decellularized materials in the direction of translational research.

Chitosan and cellulose-based composite hydrogels with embedded titanium dioxide nanoparticles as candidates for biomedical applications

Hydrogel based matrices and titanium dioxide (TiO₂) nanoparticles (NPs) are well established materials in bone tissue engineering. Nevertheless, there is still a challenge to design appropriate composites with enhanced mechanical properties and improved cell growth. Progressing in this direction, we synthesized nanocomposite hydrogels by impregnating TiO₂ NPs in a chitosan and cellulose-based hydrogel matrix containing polyvinyl alcohol (PVA), to enhance the mechanical stability and swelling capacity. Although, TiO₂ has been incorporated into single and double component matrix systems, it has rarely been combined with a tri-component hydrogel matrix system. The doping of NPs was confirmed by Fourier transform infrared spectroscopy, Raman spectroscopy, scanning electron microscopy and small- and wide-angle X-ray scattering. Our results showed that incorporation of TiO₂ NPs improved the tensile properties of the hydrogels significantly. Furthermore, we performed biological evaluation of scaffolds, swelling degree, bioactivity assessment, and hemolytic tests to prove that all types of hydrogels were safe for use in the human body. The culturing of human osteoblast-like cells MG-63 on hydrogels showed better adhesion of cells in the presence of TiO₂ and showed increasing proliferation with increasing amount of TiO₂. Our results showed that the sample with the highest TiO₂ concentration, CS/MC/PVA/TiO₂ (1 %) had the best biological properties.

Isolation and identification of extracellular matrix proteins from oil-based CASPERized mouse brains for matrisomal analysis

The extracellular matrix (ECM) components present within all tissues and organs help to maintain the cytoskeletal architecture and tissue morphology. Although the ECM plays a role in cellular events and signaling pathways, it has not been well studied due its insolubility and complexity. Brain tissue has a higher cell density and weaker mechanical strength than other tissues in the body. When removing cells using a general decellularization method to produce scaffolds and obtain ECM proteins, various problems must be considered because tissues are easily damaged. To retain the brain shape and ECM components, we performed decellularization in combination with polymerization. We immersed mouse brains in oil for polymerization and decellularization via O-CASPER (Oil-based Clinically and Experimentally Applicable Acellular Tissue Scaffold Production for Tissue Engineering and Regenerative Medicine) and then isolated ECM components using sequential matrisome preparation reagents (SMPRs), namely, RIPA, PNGase F, and concanavalin A. Adult mouse brains were preserved with our decellularization method. Western blot and LC-MS/MS analyses revealed that ECM components, including collagen and laminin, were isolated efficiently from decellularized mouse brains using SMPRs. Our method will be useful to obtain matrisomal data and perform functional studies using adult mouse brains and other tissues.

MAX: a simple, affordable, and rapid tissue clearing reagent for 3D imaging of wide variety of biological specimens

Transparency of biological specimens is crucial to obtaining detailed 3-dimensional images and understanding the structure and function of biological specimens. This transparency or tissue clearing can be achieved by adjusting the refractive index (RI) with embedding media and removing light barriers such as lipids, inorganic deposits, and pigments. Many currently available protocols consist of multiple steps to achieve sufficient transparency, making the process complex and time-consuming. Thus, in this study, we tailored the recipe for RI adjustment media named MAX based on the recently reported MACS protocol to achieve a single-step procedure, especially for ECM-rich tissues. This was achieved by the improvement of the tissue penetrability of the RI-matching reagent by combining MXDA with sucrose or iodixanol. While this was sufficient for the 3D imaging in many applications, MAX can also be combined with modular processes for de-lipidation, de-coloration, and de-calcification to further maximize the transparency depending on the special features of the tissues. Our approach provides an easy alternative for tissue clearing and 3D imaging.

Neural Epidermal Growth Factor-Like Like Protein 2 Is Expressed in Human Oligodendroglial Cell Types

Neural epidermal growth factor-like like 2 (NELL2) is a cytoplasmic and secreted glycosylated protein with six epidermal growth factor-like domains. In animal models, NELL2 is predominantly expressed in neural tissues where it regulates neuronal differentiation, polarization, and axon guidance, but little is known about the role of NELL2 in human brain development. In this study, we show that rostral neural stem cells (rNSC) derived from human-induced pluripotent stem cell (hiPSC) exhibit particularly strong NELL2 expression and that NELL2 protein is enriched at the apical side of neural rosettes in hiPSC-derived brain organoids. Following differentiation of human rostral NSC into neurons, NELL2 remains robustly expressed but changes its subcellular localization from >20 small cytoplasmic foci in NSC to one–five large peri-nuclear puncta per neuron. Unexpectedly, we discovered that in human brain organoids, NELL2 is readily detectable in the oligodendroglia and that the number of NELL2 puncta increases as oligodendrocytes mature. Artificial intelligence-based machine learning further predicts a strong association of NELL2 with multiple human white matter diseases, suggesting that NELL2 may possess yet unexplored roles in regulating oligodendrogenesis and/or myelination during human cortical development and maturation.

Decellularised extracellular matrix-based biomaterials for repair and regeneration of central nervous system

The central nervous system (CNS), consisting of the brain and spinal cord, regulates the mind and functions of the organs. CNS diseases, leading to changes in neurological functions in corresponding sites and causing long-term disability, represent one of the major public health issues with significant clinical and economic burdens worldwide. In particular, the abnormal changes in the extracellular matrix under various disease conditions have been demonstrated as one of the main factors that can alter normal cell function and reduce the neuroregeneration potential in damaged tissue. Decellularised extracellular matrix (dECM)-based biomaterials have been recently utilised for CNS applications, closely mimicking the native tissue. dECM retains tissue-specific components, including proteoglycan as well as structural and functional proteins. Due to their unique composition, these biomaterials can stimulate sensitive repair mechanisms associated with CNS damages. Herein, we discuss the decellularisation of the brain and spinal cord as well as recellularisation of acellular matrix and the recent progress in the utilisation of brain and spinal cord dECM.

Preconditioning process for dermal tissue decellularization using electroporation with sonication

Decellularization to produce bioscaffolds composed of the extracellular matrix (ECM) uses enzymatic, chemical and physical methods to remove antigens and cellular components from tissues. Effective decellularization methods depend on the characteristics of tissues, and in particular, tissues with dense, complex structure and abundant lipid content are difficult to completely decellularize. Our study enables future research on the development of methods and treatments for fabricating bioscaffolds via decellularization of complex and rigid skin tissues, which are not commonly considered for decellularization to date as their structural and functional characteristics could not be preserved after severe decellularization. In this study, decellularization of human dermal tissue was done by a combination of both chemical (0.05% trypsin-EDTA, 2% SDS and 1% Triton X-100) and physical methods (electroporation and sonication). After decellularization, the content of DNA remaining in the tissue was quantitatively confirmed, and the structural change of the tissue and the retention and distribution of ECM components were evaluated through histological and histochemical analysis, respectively. Conditions of the chemical pretreatment that increase the efficiency of physical stimulation as well as decellularization, and conditions for electroporation and sonication without the use of detergents, unlike the methods performed in previous studies, were established to enable the complete decellularization of the skin tissue. The combinatorial decellularization treatment formed micropores in the lipid bilayers of the skin tissues while removing all cell and cellular residues without affecting the ECM properties. Therefore, this procedure can be widely used to fabricate bioscaffolds by decellularizing biological tissues with dense and complex structures.

Pro-angiogenic decellularized vessel matrix gel modified by silk fibroin for rapid vascularization of tissue engineering scaffold

Current pro-angiogenic methods in the fields of tissue engineering always aim to enrich the vascular network but neglect to provide an appropriate environment for cells, which may lead to incomplete endothelium or thrombosis. Decellularized matrix gels derived from specific tissue are expected to be suitable for targeted tissue regeneration because they preserve the biochemical properties of the native tissue. Decellularized vascular matrix gel (DVMG) has shown promise for rapid vascularization. However, DVMG is difficult to directly apply due to its weak mechanical properties and rapid degradation. In this work, silk fibroin (SF) was introduced to the DVMG to improve the physical properties of the hybrid scaffolds. The performances of the SF/DVMG scaffolds were characterized, and the results showed that SF effectively improved the overall mechanical properties of the scaffold and decreased the degradation rate. SF/DVMG scaffolds also showed good cell growth promotion effects in vitro. After the scaffolds were subcutaneously implanted in the dorsa of rats, more CD34-positive endothelial cells were expressed in the DVMG-containing scaffolds, and the number of vascular loops significantly increased compared to that of the pure SF scaffold control. The development of DVMG creates more possibilities for the rapid vascular network generation of clinically engineered scaffolds.

Klotho inhibits neuronal senescence in human brain organoids

Aging is a major risk factor for many neurodegenerative diseases. Klotho (KL) is a glycosylated transmembrane protein that is expressed in the choroid plexus and neurons of the brain. KL exerts potent anti-aging effects on multiple cell types in the body but its role in human brain cells remains largely unclear. Here we show that human cortical neurons, derived from human pluripotent stem cells in 2D cultures or in cortical organoids, develop the typical hallmarks of senescent cells when maintained in vitro for prolonged periods of time, and that moderate upregulation or repression of endogenous KL expression in cortical organoids inhibits and accelerates senescence, respectively. We further demonstrate that KL expression alters the expression of senescence-associated genes including, extracellular matrix genes, and proteoglycans, and can act in a paracrine fashion to inhibit neuronal senescence. In summary, our results establish an important role for KL in the regulation of human neuronal senescence and offer new mechanistic insight into its role in human brain aging.

Photocrosslinkable liver extracellular matrix hydrogels for the generation of 3D liver microenvironment models

Liver extracellular matrix (ECM)-based hydrogels have gained considerable interest as biomimetic 3D cell culture environments to investigate the mechanisms of liver pathology, metabolism, and toxicity. The preparation of current liver ECM hydrogels, however, is based on time-consuming thermal gelation and limits the control of mechanical properties. In this study, we used detergent-based protocols to produce decellularized porcine liver ECM, which in turn were solubilized and functionalized with methacrylic anhydride to generate photocrosslinkable methacrylated liver ECM (LivMA) hydrogels. Firstly, we explored the efficacy of two protocols to decellularize porcine liver tissue using varying combinations of commonly used chemical agents such as Triton X-100, Sodium Dodecyl Sulphate (SDS) and Ammonium hydroxide. Then, we demonstrated successful formation of stable, reproducible LivMA hydrogels from both the protocols by photocrosslinking. The LivMA hydrogels obtained from the two decellularization protocols showed distinct mechanical properties. The compressive modulus of the hydrogels was directly dependent on the hydrogel concentration, thereby demonstrating the tuneability of mechanical properties of these hydrogels. Immortalized Human Hepatocytes cells were encapsulated in the LivMA hydrogels and cytocompatibility of the hydrogels was demonstrated after one week of culture. In summary, the LivMA hydrogel system provides a simple, photocrosslinkable platform, which can potentially be used to simulate healthy versus damaged liver for liver disease research, drug studies and cancer metastasis modelling.

Pulmonary tissue-mimetic hydrogel niches for small cell lung cancer cell culture

Although small cell lung cancer (SCLC) is characterized by early metastasis and high resistance to most anti-cancer therapeutics, resulting in poor prognosis, surgical treatment is unavailable for most patients. Instead, clinical treatment for SCLC patients relies largely on chemotherapy. Therefore, an analysis platform supporting research into the physiology of SCLC cells and novel anti-cancer drugs is strongly needed. Decellularized extracellular matrix (dECM) hydrogel is a promising candidate cell-culture system that could provide a tissue-specific environment. However, dECM-based hydrogels have limited property control, poor mechanical properties, and loss of components during decellularization. In this study, porcine decellularized lung tissue and hyaluronic acid (HA) were hybridized via photopolymerization to form a pulmonary tissue-mimetic hydrogel. dECM solution was obtained by decellularization and pepsin digestion. The dECM and HA were then modified with methacrylic moieties, which produced dECM-methacrylate (dECM-MA) and HA methacrylate (HA-MA). dECM-MA/HA-MA hydrogels were fabricated by photopolymerization using a photoinitiator under UV light irradiation. The mechanical properties of the dECM-based hydrogel were compared with those of native tissue. SCLC cells (NCI-H69) were encapsulated in multiple types of dECM-based hydrogels, and they exhibited higher cell proliferation, drug resistance, and CD44 expression in the presence of dECM-MA and HA-MA than in the control condition.

Spatiotemporal contribution of neuromesodermal progenitor-derived neural cells in the elongation of developing mouse spinal cord

AIMS

During vertebrate development, the posterior end of the embryo progressively elongates in a head-to-tail direction to form the body plan. Recent lineage tracing experiments revealed that bi-potent progenitors, called neuromesodermal progenitors (NMPs), produce caudal neural and mesodermal tissues during axial elongation. However, their precise location and contribution to spinal cord development remain elusive.

MAIN METHODS

Here we used NMP-specific markers (Sox2 and BraT) and a genetic lineage tracing system to localize NMP progeny in vivo.

KEY FINDINGS

Sox2 and BraT double positive cells were initially located at the tail tip, but were later found in the caudal neural tube, which is a unique feature of mouse development. In the neural tube, they produced neural progenitors (NPCs) and contributed to the spinal cord gradually along the AP axis during axial elongation. Interestingly, NMP-derived NPCs preferentially contributed to the ventral side first and later to the dorsal side at the lumbar spinal cord level, which may be associated with atypical junctional neurulation in mice.

SIGNIFICANCE

Our current observations detail the contribution of NMP progeny to spinal cord elongation and provide insights into how different species uniquely execute caudal morphogenesis.

Rapid and Efficient Generation of Myelinating Human Oligodendrocytes in Organoids

Human stem cell derived brain organoids are increasingly gaining attention as an ideal model system for investigating neurological diseases, particularly those that involve myelination defects. However, current protocols for generating brain organoids with sufficiently mature oligodendrocytes that deposit myelin on endogenously produced neurons are lengthy and complicated. Taking advantage of a human pluripotent stem cell line that reports on SOX10 expression, we developed a protocol that involves a 42 day exposure of neuroectoderm-derived organoids to a cocktail of growth factors and small molecules that collectively foster oligodendrocyte specification and survival. Importantly, the resulting day 42 brain organoids contain both myelinating oligodendrocytes, cortical neuronal cells and astrocytes. These oligodendrocyte brain organoids therefore constitute a valuable and tractable platform for functional neurogenomics and drug screening for white matter diseases.

Unlocking mammalian regeneration through hypoxia inducible factor one alpha signaling

Historically, the field of regenerative medicine has aimed to heal damaged tissue through the use of biomaterials scaffolds or delivery of foreign progenitor cells. Despite 30 years of research, however, translation and commercialization of these techniques has been limited. To enable mammalian regeneration, a more practical approach may instead be to develop therapies that evoke endogenous processes reminiscent of those seen in innate regenerators. Recently, investigations into tadpole tail regrowth, zebrafish limb restoration, and the super-healing Murphy Roths Large (MRL) mouse strain, have identified ancient oxygen-sensing pathways as a possible target to achieve this goal. Specifically, upregulation of the transcription factor, hypoxia-inducible factor one alpha (HIF-1α) has been shown to modulate cell metabolism and plasticity, as well as inflammation and tissue remodeling, possibly priming injuries for regeneration. Since HIF-1α signaling is conserved across species, environmental or pharmacological manipulation of oxygen-dependent pathways may elicit a regenerative response in non-healing mammals. In this review, we will explore the emerging role of HIF-1α in mammalian healing and regeneration, as well as attempts to modulate protein stability through hyperbaric oxygen treatment, intermittent hypoxia therapy, and pharmacological targeting. We believe that these therapies could breathe new life into the field of regenerative medicine.

Multi-responsive, self-healing and adhesive PVA based hydrogels induced by the ultrafast complexation of Fe3+ ions

Herein, a PVA (polyvinyl alcohol)-based multi-responsive hydrogel was prepared by introducing the dynamic and reversible supramolecular complexation between polyvinyl alcohol acetoacetate (PVAA) and Fe3+ ions within 20 s at room temperature. PVAA-Fe hydrogels could be achieved by the simple mixing process of a PVAA aqueous solution with FeCl3 aqueous solution. The soluble PVAA was synthesized by the reaction of PVA with tert-butyl acetoacetate (t-BAA) via transesterification in dimethyl sulfoxide (DMSO). The chemical structure of PVAA was systematically characterized by FT-IR and 1H NMR spectroscopy. The resulting hydrogel showed excellent self-healing behavior without other external stimuli. It was also demonstrated that the PVAA-Fe hydrogel exhibited multi-responsive properties, such as responsiveness to pH, redox, light irradiation and temperature. In addition, the presence of Fe3+ ions and Cl- ions in the gel imparted the PVAA-Fe hydrogel with favorable conductivity. Therefore, the strategy for the facile preparation of the hydrogel in this work could provide a benign and versatile method for achieving multi-functional soft materials for various applications such as smart devices, logic gates, and sensors.