Thermal Transformation of Molecular Ni2+–N4 Sites for Enhanced CO2 Electroreduction Activity

Recent progress on nickel phthalocyanine-based electrocatalysts for CO2 reduction

The electrocatalytic reduction of CO2 to high-value fuels by renewable electricity is a sustainable strategy, which can substitute for fossil fuels and circumvent climate changes induced by elevated CO2 emission levels, making the rational design of versatile electrocatalysts highly desirable. Among all the electrocatalytic materials used in the CO2 reduction reaction, nickel phthalocyanine (NiPc)-based electrocatalysts have attracted considerable attention recently because of their high CO selectivity and catalytic activity. Herein, we review the latest advances in CO2 electroreduction to CO catalyzed by immobilized NiPc and its derivatives on diverse surfaces. Specific strategies, the structure-performance relationship and the CO2-to-CO reaction mechanism of these NiPc-based electrocatalysts are analyzed. Future opportunities and challenges for this series of powerful heterogeneous electrocatalysts are also highlighted.

Axially Modified Square-Pyramidal CoN4-F1 Sites Enabling High-Performance Zn-Air Batteries

Cobalt-nitrogen-carbon (Co-N-C) catalysts with a CoN4 structure exhibit great potential for oxygen reduction reaction (ORR), but the imperfect adsorption energy toward oxygen species greatly limits their reduction efficiency and practical application potential. Here, F-coordinated Co-N-C catalysts with square-pyramidal CoN4-F1 configuration are successfully synthesized using F atoms to regulate the axial coordination of Co centers via hydrothermal and chemical vapor deposition methods. During the synthesis process, the geometry structure of the Co atom converts from six-coordinated Co-F6 to square-pyramidal CoN4-F1 in the coordinatively unsaturated state, which provides an open binding site for the O2. The introduction of axial F atoms into the CoN4 plane alters the local atomic environment around Co, significantly improving the ORR activity and Zn-air batteries performance. In situ spectroscopy proves that CoN4-F1 sites strongly combine with the OOH* intermediate and facilitate the splitting of O-O bond, making OOH* readily decompose into O* and OH* via a dissociative pathway. Theoretical calculations confirm that the axial F atom effectively reduces the electronic density of the Co centers and facilitates the desorption of the OH* intermediate, efficiently accelerating the overall ORR kinetics. This work advances a feasible synthesis mechanism of axial ligands and provides a route to construct efficient high-coordination catalysts.

Nickel Single Atom Density-Dependent CO2 Efficient Electroreduction

The transition metal-nitrogen-carbon (M─N─C) with MNx sites has shown great potential in CO2 electroreduction (CO2RR) for producing high value-added C1 products. However, a comprehensive and profound understanding of the intrinsic relationship between the density of metal single atoms and the CO2RR performance is still lacking. Herein, a series of Ni single-atom catalysts is deliberately designed and prepared, anchored on layered N-doped graphene-like carbon (x Ni1@NG-900, where x represents the Ni loading, 900 refers to the temperature). By modulating the precursor, the density of Ni single atoms (DNi) can be finely tuned from 0.01 to 1.19 atoms nm-2. The CO2RR results demonstrate that the CO faradaic efficiency (FECO) predominantly increases from 13.4% to 96.2% as the DNi increased from 0 to 0.068 atoms nm-2. Then the FECO showed a slow increase from 96.2% to 98.2% at -0.82 V versus reversible hydrogen electrode (RHE) when DNi increased from 0.068 to 1.19 atoms nm-2. The theoretical calculations are in good agreement with experimental results, indicating a trade-off relationship between DNi and CO2RR performance. These findings reveal the crucial role of the density of Ni single atoms in determining the CO2RR performance of M─N─C catalysts.

Pulse Electrolysis Turns on CO2 Methanation through N-Confused Cupric Porphyrin

Breaking the D4h symmetry in the square-planar M-N4 configuration of macrocycle molecular catalysts has witnessed enhanced electrocatalytic activity, but at the expense of electrochemical stability. Herein, we hypothesize that the lability of the active Cu-N3 motifs in the N-confused copper (II) tetraphenylporphyrin (CuNCP) could be overcome by applying pulsed potential electrolysis (PPE) during electrocatalytic carbon dioxide reduction. We find that applying PPE can indeed enhance the CH4 selectivity on CuNCP by 3 folds to reach the partial current density of 170 mA cm-2 at >60 % Faradaic efficiency (FE) in flow cell. However, combined ex situ X-ray diffraction (XRD), transmission electron microscope (TEM), and in situ X-ray absorption spectroscopy (XAS), infrared (IR), Raman, scanning electrochemical microscopy (SECM) characterizations reveal that, in a prolonged time scale, the decomplexation of CuNCP is unavoidable, and the promoted water dissociation under high anodic bias with lowered pH and enriched protons facilitates successive hydrogenation of *CO on the irreversibly reduced Cu nanoparticles, leading to the improved CH4 selectivity. As a key note, this study signifies the adaption of electrolytic protocol to the catalyst structure for tailoring local chemical environment towards efficient CO2 reduction.

Ni Single Atoms Embedded in Graphene Nanoribbon Sieves for High-Performance CO2 Reduction to CO

Ni single-atom catalysts (SACs) are appealing for electrochemical reduction CO2 reduction (CO2 RR). However, regulating the balance between the activity and conductivity remains a challenge to Ni SACs due to the limitation of substrates structure. Herein, the intrinsic performance enhancement of Ni SACs anchored on quasi-one-dimensional graphene nanoribbons (GNRs) synthesized is demonstrated by longitudinal unzipping carbon nanotubes (CNTs). The abundant functional groups on GNRs can absorb Ni atoms to form rich Ni-N4 -C sites during the anchoring process, providing a high intrinsic activity. In addition, the GNRs, which maintain a quasi-one-dimensional structure and possess a high conductivity, interconnect with each other and form a conductive porous framework. The catalyst yields a 44 mA cm-2 CO partial current density and 96% faradaic efficiency of CO (FECO ) at -1.1 V vs RHE in an H-cell. By adopting a membrane electrode assembly (MEA) flow cell, a 95% FECO and 2.4 V cell voltage are achieved at 200 mA cm-2 current density. This work provides a rational way to synthesize Ni SACs with a high Ni atom loading, porous morphology, and high conductivity with potential industrial applications.

Temperature-Induced Low-Coordinate Ni Single-Atom Catalyst for Boosted CO2 Electroreduction Activity

Single-atom catalysts (SACs) exhibit remarkable potential for electrochemical reduction of CO2 to value-added products. However, the commonly pursued methods for preparing SACs are hard to scale up, and sometimes, lack general applicability because of expensive raw materials and complex synthetic procedures. In addition, the fine tuning of coordination environment of SACs remains challenging due to their structural vulnerability. Herein, a simple and universal strategy is developed to fabricate Ni SACs with different nitrogen coordination numbers through one-step pyrolysis of melamine, Ni(NO3 )∙6H2 O, and polyvinylpyrrolidone at different temperatures. Experimental measurements and theoretical calculations reveal that the low-coordinate Ni SACs exhibit outstanding CO2 reduction performance and stability, achieving a Faradic efficiency (FECO ) of 98.5% at -0.76 V with CO current density of 24.6 mA cm-2 , and maintaining FECO of over 91.0% at all applied potential windows from -0.56 to -1.16 V, benefiting from its coordinatively unsaturated structure to afford high catalytic activity and low barrier for the formation of *COOH intermediate. No significant performance degradation is observed over 50 h of continuous operation. Additionally, several other metallic single-atom catalysts are successfully prepared by this synthetic method, demonstrating the universality of this strategy.

Asymmetric dinitrogen-coordinated nickel single-atomic sites for efficient CO2 electroreduction

Developing highly efficient, selective and low-overpotential electrocatalysts for carbon dioxide (CO₂) reduction is crucial. This study reports an efficient Ni single-atom catalyst coordinated with pyrrolic nitrogen and pyridinic nitrogen for CO₂ reduction to carbon monoxide (CO). In flow cell experiments, the catalyst achieves a CO partial current density of 20.1 mA cm_geo^-2 at -0.15 V vs. reversible hydrogen electrode (V_RHE). It exhibits a high turnover frequency of over 274,000 site^-1 h^-1 at -1.0 V_RHE and maintains high Faradaic efficiency of CO (FE_CO) exceeding 90% within -0.15 to -0.9 V_RHE. Operando synchrotron-based infrared and X-ray absorption spectra, and theoretical calculations reveal that mono CO-adsorbed Ni single sites formed during electrochemical processes contribute to the balance between key intermediates formation and CO desorption, providing insights into the catalyst's origin of catalytic activity. Overall, this work presents a Ni single-atom catalyst with good selectivity and activity for CO₂ reduction while shedding light on its underlying mechanism.

Edge Coordination of Ni Single Atoms on Hard Carbon Promotes the Potassium Storage and Reversibility

Hard carbon is the most promising anode for potassium-ion batteries (PIBs) due to its low cost and abundance, but its limited storage capacity remains a major challenge. Herein, edge coordination of metal single atoms is proved to be an effective strategy for promoting potassium storage in hard carbon for the first time, taking B, N co-doped hard carbon nanotubes anchored by edge Ni-N₄ -B atomic sites (Ni@BNHC) as an example. It is revealed that edge Ni-N₄ -B can provide active sites for interlayer adsorption of K⁺ and that Ni atoms can facilitate the reversibility of K⁺ storage on N and B atoms. Furthermore, an unprecedentedly reversible K⁺ storage capacity of 694 mAh g^-1 at 0.05 A g^-1 is realized by introducing commercial carbon nanotubes. This work provides a new perspective for the application of single-atom engineering and the design of high-performance carbon anodes for PIBs.

Geometric and Electronic Structural Engineering of Isolated Ni Single Atoms for a Highly Efficient CO2 Electroreduction

Tuning the coordination environment and geometric structures of single atom catalysts is an effective approach for regulating the reaction mechanism and maximize the catalytic efficiency of single-atom centers. Here, a template-based synthesis strategy is proposed for the synthesis of high-density NiN_x sites anchored on the surface of hierarchically porous nitrogen-doped carbon nanofibers (Ni-HPNCFs) with different coordination environments. First-principles calculations and advanced characterization techniques demonstrate that the single Ni atom is strongly coordinated with both pyrrolic and pyridinic N dopants, and that the predominant sites are stabilized by NiN₃ sites. This dual engineering strategy increases the number of active sites and utilization efficiency of each single atom as well as boosts the intrinsic activity of each active site on a single-atom scale. Notably, the Ni-HPNCF catalyst achieves a high CO Faradaic efficiency (FE_CO ) of 97% at a potential of -0.7 V, a high CO partial current density (j_CO ) of 49.6 mA cm^-2 (-1.0 V), and a remarkable turnover frequency of 24 900 h^-1 (-1.0 V) for CO₂ reduction reactions (CO₂ RR). Density functional theory calculations show that compared to pyridinic-type NiN_x , the pyrrolic-type NiN₃ moieties display a superior CO₂ RR activity over hydrogen evolution reactions, resulting in their superior catalytic activity and selectivity.

Promoting CO2 Dynamic Activation via Micro-Engineering Technology for Enhancing Electrochemical CO2 Reduction

Optimizing the coordination structure and microscopic reaction environment of isolated metal sites is promising for boosting catalytic activity for electrocatalytic CO₂ reduction reaction (CO₂ RR) but is still challenging to achieve. Herein, a newly electrostatic induced self-assembly strategy for encapsulating isolated Ni-C₃ N₁ moiety into hollow nano-reactor as I-Ni SA/NHCRs is developed, which achieves FE_CO  of 94.91% at -0.80 V, the CO partial current density of ≈-15.35 mA cm^-2 , superior to that with outer Ni-C₂ N₂ moiety (94.47%, ≈-12.06 mA cm^-2 ), or without hollow structure (92.30%, ≈-5.39 mA cm^-2 ), and high FE_CO of ≈98.41% at 100 mA cm^-2 in flow cell. COMSOL multiphysics finite-element method and density functional theory (DFT) calculation illustrate that the excellent activity for I-Ni SA/NHCRs should be attributed to the structure-enhanced kinetics process caused by its hollow nano-reactor structure and unique Ni-C₃ N₁ moiety, which can enrich electron on Ni sites and positively shift d-band center to the Fermi level to accelerate the adsorption and activation of CO₂ molecule and *COOH formation. Meanwhile, this strategy also successfully steers the design of encapsulating isolated iron and cobalt sites into nano-reactor, while I-Ni SA/NHCRs-based zinc-CO₂ battery assembled with a peak power density of 2.54 mW cm-^-2 is achieved.

Deciphering the Selectivity of the Electrochemical CO2 Reduction to CO by a Cobalt Porphyrin Catalyst in Neutral Aqueous Solution: Insights from DFT Calculations

Density functional theory (DFT) calculations were conducted to investigate the cobalt porphyrin-catalyzed electro-reduction of CO2 to CO in an aqueous solution. The results suggest that CoII -porphyrin (CoII -L) undertakes a ligand-based reduction to generate the active species CoII -L⋅- , where the CoII center antiferromagnetically interacts with the ligand radical anion. CoII -L⋅- then performs a nucleophilic attack on CO2 , followed by protonation and a reduction to give CoII -L-COOH. An intermolecular proton transfer leads to the heterolytic cleavage of the C-O bond, producing intermediate CoII -L-CO. Subsequently, CO is released from CoII -L-CO, and CoII -L is regenerated to catalyze the next cycle. The rate-determining step of this CO2 RR is the nucleophilic attack on CO2 by CoII -L⋅- , with a total barrier of 20.7 kcal mol-1 . The competing hydrogen evolution reaction is associated with a higher total barrier. A computational investigation regarding the substituent effects of the catalyst indicates that the CoPor-R3 complex is likely to display the highest activity and selectivity as a molecular catalyst.

Highly Dispersed Ni on Nitrogen-Doped Carbon for Stable and Selective Hydrogen Generation from Gaseous Formic Acid

Ni supported on N-doped carbon is rarely studied in traditional catalytic reactions. To fill this gap, we compared the structure of 1 and 6 wt% Ni species on porous N-free and N-doped carbon and their efficiency in hydrogen generation from gaseous formic acid. On the N-free carbon support, Ni formed nanoparticles with a mean size of 3.2 nm. N-doped carbon support contained Ni single-atoms stabilized by four pyridinic N atoms (N₄-site) and sub-nanosized Ni clusters. Density functional theory calculations confirmed the clustering of Ni when the N₄-sites were fully occupied. Kinetic studies revealed the same specific Ni mass-based reaction rate for single-atoms and clusters. The N-doped catalyst with 6 wt% of Ni showed higher selectivity in hydrogen production and did not lose activity as compared to the N-free 6 wt% Ni catalyst. The presented results can be used to develop stable Ni catalysts supported on N-doped carbon for various reactions.

Heterogenization of Molecular Electrocatalytic Active Sites through Reticular Chemistry

The electrochemical conversion of small molecules, such as CO₂ , O₂ , and H₂ O, has received significant attention as a potential engine for sustainable life. Metal-organic frameworks (MOFs) are a promising class of electrocatalytic materials for such processes. An attractive aspect of utilizing this class of materials as electrocatalysts is that well-known molecular active sites can be introduced to well-defined crystalline heterogeneous catalytic systems with high tunability. This review offers strategic insights into recent studies on MOF-based electrocatalysts by discussing the notable active sites that have been utilized in both homogeneous and heterogeneous catalysts, while highlighting instances where such active sites have been introduced into MOFs. In addition, material design principles enabling the integration of electrochemically active components with the MOF platform are outlined. Viewpoints on the viability of MOFs as an alternative to currently used electrocatalysts are also discussed. Finally, the future direction of MOF-based electrocatalysis research is established.

Regulating Morphological Features of Nickel Single-Atom Catalysts for Selective and Enhanced Electroreduction of CO2

Single-atom catalysts (SACs) are of interest for chemical transformations of significant energy and environmental relevance because of the envisioned efficient use of active sites and the flexibility in tuning their coordination environment. Future advancement in this vein hinges upon the ability to further increase the number and accessibility of active sites in addition to fine-tuning their chemical environment. In this work, a Ni SAC is reported with a unique hierarchical hollow structure (Ni/HH) that allows increased accessibility of the active sites. The successful obtainment of such a uniquely structured catalyst was enabled by the judiciously chosen solvent mixtures for the preparation of the precursor whose hierarchical feature is maintained during the subsequent pyrolysis and etching of the pyrolysis product. Comparative catalytic and mechanistic studies with reference to three closely related but more compact Ni SACs established the superior performance of Ni/HH for selective electroreduction of CO₂ to CO. Experimental analyses by in situ attenuated total reflection surface-enhanced infrared spectroscopy reveal that it is the facilitated formation of the *COOH intermediate in the rate-determining step that leads to the enhanced reaction kinetics and the overall catalytic performance.

Theoretical Study on the Electro-Reduction of Carbon Dioxide to Methanol Catalyzed by Cobalt Phthalocyanine

Density functional theory (DFT) calculations have been conducted to investigate the mechanism of cobalt(II) tetraamino phthalocyanine (CoPc-NH₂) catalyzed electro-reduction of CO₂. Computational results show that the catalytically active species 1 (⁴[Co^II(H₄L)]⁰) is formed by a four-electron-four-proton reduction of the initial catalyst CoPc-NH₂. Complex 1 can attack CO₂ after a one-electron reduction to give a [Co^III-CO₂^2-]^- intermediate, followed by a protonation and a one-electron reduction to give intermediate [Co^II-COOH]^- (4). Complex 4 is then protonated on its hydroxyl group by a carbonic acid to generate the critical species 6 (Co^III-L^•--CO), which can release the carbon monoxide as an intermediate (and also as a product). In parallel, complex 6 can go through a successive four-electron-four-proton reduction to produce the targeted product methanol without forming formaldehyde as an intermediate product. The high-lying π orbital and the low-lying π* orbital of the phthalocyanine endow the redox noninnocent nature of the ligand, which could be a dianion, a radical monoanion, or a radical trianion during the catalysis. The calculated results for the hydrogen evolution reaction indicate a higher energy barrier than the carbon dioxide reduction. This is consistent with the product distribution in the experiments. Additionally, the amino group on the phthalocyanine ligand was found to have a minor effect on the barriers of critical steps, and this accounts for the experimentally observed similar activity for these two catalysts, namely, CoPc-NH₂ and CoPc.

Steering Catalytic Selectivity with Atomically Dispersed Metal Electrocatalysts for Renewable Energy Conversion and Commodity Chemical Production

Electrocatalysis is a key driver in promoting the paradigm shift from the current fossil-fuel-based hydrocarbon economy to a renewable-energy-driven hydrogen economy. The success of electrocatalysis hinges primarily on achieving high catalytic selectivity along with maximum activity and sustained longevity. Many electrochemical reactions proceed through multiple pathways, requiring highly selective catalysts.Atomically dispersed metal catalysts have emerged as a new frontier in heterogeneous catalysis. In addition to the widely perceived advantages of maximized active site utilization and substantially reduced metal content, they have shown different catalytic selectivities in some electrocatalytic reactions compared to the traditional nanoparticle (NP)-based catalysts. Although there have been significant advances in their synthesis, the highly energetic nature of a single atomic site has made the preparation of atomically dispersed metal catalysts rely on empiricism rather than rational design. Consequently, the structural comprehension of a single atomic site and the understanding of its unusual electrocatalytic selectivity remain largely elusive.In this Account, we describe our endeavors toward developing general synthetic approaches for atomically dispersed metal catalysts for the discovery of new selective and active electrocatalysts and to understand their catalytic nature. We introduce synthetic approaches to produce a wide range of nonprecious- and precious-metal-based atomically dispersed catalysts and control their coordination environments. Metallomacrocyclic-compound-driven top-down and metal salt/heteroatom layer-based bottom-up strategies, coupled with a SiO₂-protective-layer-assisted method, have been developed that can effectively generate single atomic sites while mitigating the formation of metallic NPs. The low-temperature gas-phase ligand exchange method can reversibly tune the coordination structure of the atomically dispersed metal sites. We have used the prepared atomically dispersed metal catalysts as model systems to investigate their electrocatalytic reactivity for renewable energy conversion and commodity chemical production reactions, in which high selectivity is important. The reactions of our interest include the following: (i) the oxygen reduction reaction, where O₂ is reduced to either H₂O or H₂O₂ via the four-electron or two electron pathway, respectively; (ii) the CO₂ reduction reaction, which should suppress the hydrogen evolution reaction; and (iii) the chlorine evolution reaction, which competes with the oxygen evolution reaction. The type of metal center to which the reactant is directly bound is found to be the most important in determining the selectivity, which originates from the dramatic changes in the binding energy of each metal center with the reactants. The coordination structure surrounding the metal center also has a significant effect on the selectivity; its control can modulate the oxidation state of the metal center, thereby altering the binding strength with the reactants.We envisage that future advances in the synthesis of atomically dispersed metal catalysts, combined with the growing power of computational, spectroscopic, and microscopic methods, will bring their synthesis to the level of rational design. Elaborately designed catalysts can overcome the current limits of catalytic selectivity, which will help establish the field of atomically dispersed metal catalysts as an important branch of catalysis.

Electrocatalytic CO2 reduction to alcohols by modulating the molecular geometry and Cu coordination in bicentric copper complexes

Electrocatalytic reduction of CO₂ into alcohols of high economic value offers a promising route to realize resourceful CO₂ utilization. In this study, we choose three model bicentric copper complexes based on the expanded and fluorinated porphyrin structure, but different spatial and coordination geometry, to unravel their structure-property-performance correlation in catalyzing electrochemical CO₂ reduction reactions. We show that the complexes with higher intramolecular tension and coordination asymmetry manifests a lower electrochemical stability and thus more active Cu centers, which can be reduced during electrolysis to form Cu clusters accompanied by partially-reduced or fragmented ligands. We demonstrate the hybrid structure of Cu cluster and partially reduced O-containing hexaphyrin ligand is highly potent in converting CO₂ into alcohols, up to 32.5% ethanol and 18.3% n-propanol in Faradaic efficiencies that have been rarely reported. More importantly, we uncover an interplay between the inorganic and organic phases to synergistically produce alcohols, of which the intermediates are stabilized by a confined space to afford extra O-Cu bonding. This study underlines the exploitation of structure-dependent electrochemical property to steer the CO₂ reduction pathway, as well as a potential generic tactic to target alcohol synthesis by constructing organic/inorganic Cu hybrids.

Electrocatalytic reduction of CO2 into multi-carbon alcohols of high economic merit offers an effective means to close the carbon cycle. Here the authors show the synergy between inorganic and organic phases derived from rationally designed molecular precursors to produce alcohols in high efficiency.

Metal-Coordinated Phthalocyanines as Platform Molecules for Understanding Isolated Metal Sites in the Electrochemical Reduction of CO2

Single-atom catalysts (SACs) of non-precious transition metals (TMs) often show unique electrochemical performance, including the electrochemical carbon dioxide reduction reaction (CO₂RR). However, the inhomogeneity in their structures makes it difficult to directly compare SACs of different TM for their CO₂RR activity, selectivity, and reaction mechanisms. In this study, the comparison of isolated TMs (Fe, Co, Ni, Cu, and Zn) is systematically investigated using a series of crystalline molecular catalysts, namely TM-coordinated phthalocyanines (TM-Pcs), to directly compare the intrinsic role of the TMs with identical local coordination environments on the CO₂RR performance. The combined experimental measurements, in situ characterization, and density functional theory calculations of TM-Pc catalysts reveal a TM-dependent CO₂RR activity and selectivity, with the free energy difference of ΔG(*HOCO) - ΔG(*CO) being identified as a descriptor for predicting the CO₂RR performance.

Microenvironment Modulation in Carbon-Supported Single-Atom Catalysts for Efficient Electrocatalytic CO2 Reduction

The electrocatalytic CO 2 reduction reaction (ECRR) becomes an effective way to reduce excess CO 2 in the air and a promising strategy to maintain carbon balance. Carbon-supported single-atom catalysts (C-SACs) is a kind of cost savings and most promising catalysts for ECRR. For C-SACs, the key to achieving efficient ECRR performance is to adjusting the electronic structure of the central metal atoms by modulating their microenvironment of the catalysts. Not only the coordination numbers and hetero-atom coordination, but also the regulation of diatomic sites have a great influence on the performance of C-SACs. This review mainly focuses on recent studies for the microenvironment modulation in C-SACs for efficient ECRR. We hope that this review can contribute readers a comprehensive insight in the current research status of C-SACs for ECRR, as well as provide help for the rational design of C-SACs with better ECRR performance.

Investigation of the Stability and Hydrogen Evolution Activity of Dual-Atom Catalysts on Nitrogen-Doped Graphene

Single atom catalysts (SACs) have received a lot of attention in recent years for their high catalytic activity, selectivity, and atomic utilization rates. Two-dimensional N-doped graphene has been widely used to stabilize transition metal (TM) SACs in many reactions. However, the anchored SAC could lose its activity because of the too strong metal-N interaction. Alternatively, we studied the stability and activity of dual-atom catalysts (DACs) for 24 TMs on N-doped graphene, which kept the dispersion state but had different electronic structures from SACs. Our results show that seven DACs can be formed directly compared to the SACs. The others can form stably when the number of TMs is slightly larger than the number of vacancies. We further show that some of the DACs present better catalytic activities in hydrogen evolution reaction (HER) than the corresponding SACs, which can be attributed to the optimal charge transfer that is tuned by the additional atom. After the screening, the DAC of Re is identified as the most promising catalyst for HER. This study provides useful information for designing atomically-dispersed catalysts on N−doped graphene beyond SACs.

Proton/Electron Donors Enhancing Electrocatalytic Activity of Supported Conjugated Microporous Polymers for CO2 Reduction

Metal phthalocyanines (MePc) hold great promise in electrochemical reduction of CO₂ to value-added chemicals, whereas the catalytic activity of MePc-containing polymers often suffers from a limited molecular modulation strategy. Herein, we synthesize an ultrathin conjugated microporous polymer sheath around carbon nanotubes by an ionothermal copolymerization of CoPc and H₂ Pc via the Scholl reaction. Given the H₂ Pc-mediated regulation in the synthesis, Co^II metal is well preserved in the form of single atoms on the polymer sheath of the carbon nanotubes. With the synergistic effect of H₂ Pc moieties as proton/electron donors, the composites can selectively reduce CO₂ to CO with a high Faradaic efficiency (max. 97 % at -0.9 V) in broad potential windows, exceptional turnover frequency (97 592 h^-1 at -0.65 V) and large current density (>200 mA cm^-2 ). It is thus desirable to develop a family of heterogeneous polymerized MePc with molecularly regulating electrocatalytic activity.

Electrochemical Reduction of CO2 to CO over Transition Metal/N-Doped Carbon Catalysts: The Active Sites and Reaction Mechanism

Electrochemical CO2 reduction to value-added chemicals/fuels provides a promising way to mitigate CO2 emission and alleviate energy shortage. CO2 -to-CO conversion involves only two-electron/proton transfer and thus is kinetically fast. Among the various developed CO2 -to-CO reduction electrocatalysts, transition metal/N-doped carbon (M-N-C) catalysts are attractive due to their low cost and high activity. In this work, recent progress on the development of M-N-C catalysts for electrochemical CO2 -to-CO conversion is reviewed in detail. The regulation of the active sites in M-N-C catalysts and their related adjustable electrocatalytic CO2 reduction performance is discussed. A visual performance comparison of M-N-C catalysts for CO2 reduction reaction (CO2 RR) reported over the recent years is given, which suggests that Ni and Fe-N-C catalysts are the most promising candidates for large-scale reduction of CO2 to produce CO. Finally, outlooks and challenges are proposed for future research of CO2 -to-CO conversion.

Coordination environment engineering on nickel single-atom catalysts for CO2 electroreduction

Coordination engineering has recently emerged as a promising strategy to boost the activity of single atom catalysts (SACs) in electrocatalytic CO₂ reduction reactions (CO₂RR). Understanding the correlation between activity/selectivity and the coordination environment would enable the rational design of more advanced SACs for CO₂ reduction. Herein, via density functional theory (DFT) computations, we systematically studied the effects of coordination environment regulation on the CO₂RR activity of Ni SACs on C, N, or B co-doped graphene. The results reveal that the coordination environments can strongly affect the adsorption and reaction characteristics. In the C and/or N coordinated Ni-B_XC_YN_Z (B-free, X = 0), only Ni acts as the active site. While in the B, C and/or N coordinated Ni-B_XC_YN_Z (X ≠ 0), the B has transition-metal-like properties, where B and Ni function as dual-site active centers and concertedly tune the adsorption of CO₂RR intermediates. The tunability in the adsorption modes and strengths also results in a weakened linear scaling relationship between *COOH and *CO and causes a significant activity difference. The CO₂RR activity and the adsorption energy of *COOH/*CO are correlated to construct a volcano-type activity plot. Most of the B, C, and/or N-coordinated Ni-B_XC_YN_Z (X ≠ 0) are located in the left region where *CO desorption is the most difficult step, while the C and/or N coordinated Ni-B_XC_YN_Z (X = 0) are located in the right region where *COOH formation is the potential-determining step. Among all the possible Ni-B_XC_YN_Z candidates, Ni-B₀C₃N₁ and Ni-B₁C₁N_2-N-oppo are predicted to be the most active and selective catalysts for the CO₂RR. Our findings provide insightful guidance for developing highly effective CO₂RR catalysts based on a codoped coordination environment.

Atomically Structural Regulations of Carbon-Based Single-Atom Catalysts for Electrochemical CO2 Reduction

The electrochemical carbon dioxide reduction reaction (CO₂ RR) converting CO₂ into value-added chemicals and fuels to realize carbon recycling is a solution to the problem of renewable energy shortage and environmental pollution. Among all the catalysts, the carbon-based single-atom catalysts (SACs) with isolated metal atoms immobilized on conductive carbon substrates have shown significant potential toward CO₂ RR, which intrigues researchers to explore high-performance SACs for fuel and chemical production by CO₂ RR. Especially, regulating the coordination structures of the metal centers and the microenvironments of the substrates in carbon-based SACs has emerged as an effective strategy for the tailoring of their CO₂ RR catalytic performance. In this review, the current in situ/operando study techniques and the fundamental parameters for CO₂ RR performance are first briefly presented. Furthermore, the recent advances in synthetic strategies which regulate the atomic structures of the carbon-based SACs, including heteroatom coordination, coordination numbers, diatomic metal centers, and the microenvironments of substrates are summarized. In particular, the structure-performance relationship of the SACs toward CO₂ RR is highlighted. Finally, the inevitable challenges for SACs are outlined and further research directions toward CO₂ RR are presented from the perspectives.

Single-atom catalysis in advanced oxidation processes for environmental remediation

This review presents the recent advances in synthetic strategies, characterisation, and computations of carbon-based single-atom catalysts, as well as their innovative applications and mechanisms in advanced oxidation technologies.

Heterogeneous Co–CN nanofibers with controlled active terminal N sites for hydrogen evolution reaction

The terminal N sites derived from the thermal fusion process exhibit excellent performance for hydrogen evolution reaction.

A metal-organic framework/polymer derived catalyst containing single-atom nickel species for electrocatalysis

While metal–organic frameworks (MOF) alone offer a wide range of structural tunability, the formation of composites, through the introduction of other non-native species, like polymers, can further broaden their structure/property spectrum. Here we demonstrate that a polymer, placed inside the MOF pores, can support the collapsible MOF and help inhibit the aggregation of nickel during pyrolysis; this leads to the formation of single atom nickel species in the resulting nitrogen doped carbons, and dramatically improves the activity, CO selectivity and stability in electrochemical CO₂ reduction reaction. Considering the vast number of multifarious MOFs and polymers to choose from, we believe this strategy can open up more possibilities in the field of catalyst design, and further contribute to the already expansive set of MOF applications.

A metal–organic framework/polymer derived catalyst containing single-atom nickel species shows good performance for electroreduction of CO₂ to CO.