Pt Catalysts Supported on H2 and O2 Plasma-Treated Al2O3 for Hydrogenation and Dehydrogenation of the Liquid Organic Hydrogen Carrier Pair Dibenzyltoluene and Perhydrodibenzyltoluene

Advances in liquid organic hydrogen carriers: developing efficient dehydrogenation strategies

In pursuit of global carbon neutrality, countries are intensifying their efforts to harness clean energy sources. Hydrogen emerges as a superior alternative to traditional fossil fuels and plays a crucial role in the global energy shift. Liquid Organic Hydrogen Carrier (LOHC) systems are lauded for their high hydrogen storage capacity, ease of handling, and safe and efficient transportation, positioning them as effective solutions for extensive hydrogen storage and international distribution. Nevertheless, the dehydrogenation of hydrogen-rich LOHCs is slow, requiring high temperatures and substantial energy inputs. Addressing these challenges by reducing energy demands and improving dehydrogenation rates is essential for advancing LOHC technology. This paper comprehensively examines various LOHC systems, focusing on the selection of carriers and dehydrogenation catalysts, and their dehydrogenation efficacy. It also highlights our recent contributions in photocatalytic LOHC and outlines future research directions to enhance LOHC technology.

Oxygen Vacancy Enabled Electronic Structure Engineering of Pt-WO3 Nanosheets toward Highly Efficient BTEX Sensing

A Pt nanoparticle-immobilized WO3 material is a promising candidate for catalytic reactions, and the surface and electronic structure can strongly affect the performance. However, the effect of the intrinsic oxygen vacancy of WO3 on the d-band structure of Pt and the synergistic effect of Pt and the WO3 matrix on reaction performance are still ambiguous, which greatly hinders the design of advanced materials. Herein, Pt-decorated WO3 nanosheets with different electronic metal-support interactions are successfully prepared by finely tuning the oxygen vacancy structure of WO3 nanosheets. Notably, Pt-modified WO3 nanosheets annealed at 400 °C exhibit excellent benzene series (BTEX) sensing performance (S = 377.33, 365.21, 348.45, and 319.23 for 50 ppm ethylbenzene, benzene, toluene, and xylene, respectively, at 140 °C), fast response and recovery dynamics (10/7 s), excellent reliability (σ = 0.14), and sensing stability (φ = 0.08%). Detailed structural characterization and DFT results reveal that interfacial Ptδ+-Ov-W5+ sites are recognized as the active sites, and the oxygen vacancies of the WO3 matrix can significantly affect the d-band structure of Pt nanoparticles. Notably, Pt/WO3-400 with improved surface oxygen mobility and medium electronic metal-support interaction facilitates the activation and desorption of BTEX, which contributes to the highly efficient BTEX sensing performance. Our work provides a new insight for the design of high-performance surface reaction materials for advanced applications.

Liberating C-H Bond Activation: Achieving 56% Quantum Efficiency in Photocatalytic Cyclohexane Dehydrogenation

The technology of liquid organic hydrogen carriers presents great promise for large-scale hydrogen storage. Nevertheless, the activation of inert C(sp3)-H bonds in hydrocarbon carriers poses formidable challenges, resulting in a sluggish dehydrogenation process and necessitating high operating temperatures. Here, we break the shackles of C-H bond activation under visible light irradiation by fabricating subnanometer Pt clusters on defective Ce-Zr solid solutions. We achieved an unprecedented hydrogen production rate of 2601 mmol gcat.-1 h-1 (turnover frequency >50,000 molH2 molPt-1 h-1) from cyclohexane, surpassing the most advanced thermo- and photocatalysts. By optimizing the temperature-dominated hydrogen transfer process, achievable by harnessing hitherto wasted infrared light in sunlight, an astonishing 56% apparent quantum efficiency and a 5.2% solar-to-hydrogen efficiency are attained at 353 K. Our research stands as one of the most effective photocatalytic processes to date, holding profound practical significance in the utilization of solar energy and the exploitation of alkanes.

Recent Advances in Reversible Liquid Organic Hydrogen Carrier Systems: From Hydrogen Carriers to Catalysts

Liquid organic hydrogen carriers (LOHCs) have gained significant attention for large-scale hydrogen storage due to their remarkable gravimetric hydrogen storage capacity (HSC) and compatibility with existing oil and gas transportation networks for long-distance transport. However, the practical application of reversible LOHC systems has been constrained by the intrinsic thermodynamic properties of hydrogen carriers and the performances of associated catalysts in the (de)hydrogenation cycles. To overcome these challenges, thermodynamically favored carriers, high-performance catalysts, and catalytic procedures need to be developed. Here, significant advances in recent years have been summarized, primarily centered on regular LOHC systems catalyzed by homogeneous and heterogeneous catalysts, including dehydrogenative aromatization of cycloalkanes to arenes and N-heterocyclics to N-heteroarenes, as well as reverse hydrogenation processes. Furthermore, with the development of metal complexes for dehydrogenative coupling, a new family of reversible LOHC systems based on alcohols is described that can release H2 under relatively mild conditions. Finally, views on the next steps and challenges in the field of LOHC technology are provided, emphasizing new resources for low-cost hydrogen carriers, high-performance catalysts, catalytic technologies, and application scenarios.

Zincophilic Interfacial Manipulation against Dendrite Growth and Side Reactions for Stable Zn Metal Anodes

Constructing multifunctional interphases to suppress the rampant Zn dendrite growth and detrimental side reactions is crucial for Zn anodes. Herein, a phytic acid (PA)-ZnAl coordination compound is demonstrated as a versatile interphase layer to stabilize Zn anodes. The zincophilic PA-ZnAl layer can manipulate Zn2+ flux and promote rapid desolvation kinetics, ensuring the uniform Zn deposition with dendrite-free morphology. Moreover, the robust PA-ZnAl protective layer can effectively inhibit the hydrogen evolution reaction and formation of byproducts, further contributing to the reversible Zn plating/stripping with high Coulombic efficiency. As a result, the Zn@PA-ZnAl electrode shows a lower Zn nucleation overpotential and higher Zn2+ transference number compared with bare Zn. The Zn@PA-ZnAl symmetric cell exhibits a prolonged lifespan of 650 h tested at 5 mA cm-2 and 5 mAh cm-2 . Furthermore, the assembled Zn battery full cell based on this Zn@PA-ZnAl anode also delivers decent cycling stability even under harsh conditions.

Identifying Noble Metal Catalysts for the Hydrogenation and Dehydrogenation of Dibenzyltoluene: A Combined Theoretical-Experimental Study

We present a comprehensive theoretical and experimental investigation of the hydrogenation and dehydrogenation of dibenzyltoluene (DBT) using Pd-, Pt-, Ru-, and Rh-supported metal catalysts to identify the optimal catalysts for hydrogen storage and release processes. Our results demonstrated significant variation in the catalytic activity of the metal catalysts. 5 wt % Rh/Al2O3 and 5 wt % Pt/Al2O3 showed the highest activity for hydrogenation and dehydrogenation with the highest selectivity and turnover frequency (TOF), respectively. Conversely, 5 wt % Pd/Al2O3 and 5 wt % Ru/Al2O3 exhibited lower catalytic activity toward full hydrogenation and dehydrogenation. Rh/Al2O3 showed the best catalytic hydrogenation activity with a TOF of 26.49 h-1 and a hydrogenation degree of 92.69% in 2 h, while Pt/Al2O3 exhibited the best catalytic dehydrogenation activity with a released H2 volume of 3755 mL, a dehydrogenation degree of 78.23%, and a TOF of 39.56 h-1 in 2 h. Additionally, we estimated the activation energies for hydrogenation and dehydrogenation to be 67.20 and 82.78 kJ/mol, respectively. Notably, the produced hydrogen gas was of high purity and suitable for use in fuel cells. Density functional theory (DFT) calculations were used to analyze the adsorption structure and reaction energy changes of all intermediate products of DBT on the surface of the chosen catalysts. Our research provides valuable insights into developing efficient catalysts for liquid organic hydrogen carriers.

Electronic Interactions on Platinum/(Metal-Oxide)-Based Photocatalysts Boost Selective Photoreduction of CO2 to CH4

By supporting platinum (Pt) and cadmium sulfide (CdS) nanoparticles on indium oxide (In2 O3 ), we fabricated a CdS/Pt/In2 O3 photocatalyst. Selective photoreduction of carbon dioxide (CO2 ) to methane (CH4 ) was achieved on CdS/Pt/In2 O3 with electronic Pt-In2 O3 interactions, with CH4 selectivity reaching to 100 %, which is higher than that on CdS/Pt/In2 O3 without electronic Pt-In2 O3 interactions (71.7 %). Moreover, the enhancement effect of electronic Pt-(metal-oxide) interactions on selective photoreduction of CO2 to CH4 also occurs by using other common metal oxides, such as photocatalyst supports, including titanium oxide, gallium oxide, zinc oxide, and tungsten oxide. The electronic Pt-(metal-oxide) interactions separate photogenerated electron-hole pairs and convert CO2 into CO2 δ- , which can be easily hydrogenated into CH4 via a CO2 δ- →HCOO*→HCO*→CH*→CH4 path, thus boosting selective photoreduction of CO2 to CH4 . This offers a new way to achieve selective photoreduction of CO2 .

Preparation of SBA-15 supported Ru nanocatalysts by electrostatic adsorption-ultrasonic in situ reduction method and its catalytic performance for hydrogen storage of N-ethylcarbazole

N-ethylcarbazole (NEC) is an ideal liquid organic hydrogen storage carrier. The development of efficient hydrogen storage catalysts can promote the large-scale application of this process. In this paper, SBA-15 supported Ru nanocatalysts (Ru/S15-SU) were synthesized by strong electrostatic adsorption (SEA)-ultrasonic in situ reduction method (UR). Ru/S15-SU was characterized by N2 adsorption-desorption, TEM, H2 temperature program reduction, FT-IR, XRD, and XPS analysis measures. The results showed that ultrafine Ru NPs were evenly distributed on the surface of SBA-15, and ultrasonic in situ reduction not only reduced Ru3+ to Ru0, but also produced a coordination effect between Ru and O, enhancing the interaction between Ru NPs and the carrier. Ru/S15-SU exhibited excellent catalytic performance in the hydrogenation reaction of NEC, and the hydrogen storage efficiency reached 99.31% at 130°C and 6 MPa H2 pressure, which is superior to that of commercial 5wt%Ru/Al2O3. The excellent catalytic hydrogenation performance can be attributed to the selective anchoring of ruthenium ions on the surface of SBA-15 via electrostatic adsorption, preventing the aggregation of Ru NPs and enhancing the interaction between SBA-15 and Ru NPs by ultrasonic in situ reduction. Ru/S15-SU had a lower NEC hydrogenation apparent activated energy (Ea) of 68.45 kJ/mol than 5wt%Ru/Al2O3 catalyst. This method provides a new approach for the green preparation of nanocatalysts without using any chemical reducing agents.

Process coupling of CO2 reduction and 5-HMF oxidation mediated by defect-enriched layered double hydroxides

Aiming at the comprehensive utilization of waste carbon resources and renewable carbon resources, we put forward the photocatalytic coupling process of CO₂ reduction and 5-hydroxymethylfurfural (5-HMF) oxidation mediated by the anionic compound of layered double hydroxides (LDHs). Specifically, a ZnNiFe-LDH was synthesized by co-precipitation method, during which CO₂ was stored between LDH layers in the form of carbonate. Then, a certain amount of metal vacancies were introduced into LDH nanosheets by selectively etching Zn²⁺ ions. ICP-AES, EPR and XPS showed that the concentration of Zn vacancies gradually increased with the etching time prolonging, which thus optimized the electronic structure of LDH layers. Under the catalysis of the electron-rich metal cations and hydroxyl groups on the layers, the interlayer carbonate was in situ reduced into CO coupled accompanied with the 5-HMF oxidation to 2.5-furandiformaldehyde (DFF). Compared with the unetched ZnNiFe-LDHs, the CO and DFF yields over the LDHs etched for 3 h were increased by 2.84 and 2.82 times under UV-vis irradiation with a density of 500 mW cm^-2. Finally, combined with isotope-labeled ¹³CO₂ experiments and in situ FTIR characterization, we revealed the possible coupling mechanism and defect-induced performance enhancement mechanism.

A review of the advances in catalyst modification using nonthermal plasma: Process, Mechanism and Applications

With the continuous development of catalytic processes in chemistry, biology, organic synthesis, energy generation and many other fields, the design of catalysts with novel properties has become a new paradigm in both science and industry. Nonthermal plasma has aroused extensive interest in the synthesis and modification of catalysts. An increasing number of researchers are using plasma for the modification of target catalysts, such as modifying the dispersion of active sites, regulating electronic properties, enhancing metal-support interactions, and changing the morphology. Plasma provides an alternative choice for catalysts in the modification process of oxidation, reduction, etching, coating, and doping and is especially helpful for unfavourable thermodynamic processes or heat-sensitive reactions. This review focuses on the following points: (i) the fundamentals behind the nonthermal plasma modification of catalysts; (ii) the latest research progress on the application of plasma modified catalysts; and (iii) main challenges in the field and a vision for future development.

Dielectric barrier discharge plasma grafting carboxylate groups on Pt/Al2O3 catalysts for highly efficient hydrogen release from perhydro-dibenzyltoluene

The carboxylate groups on Pt/Al2O3 catalysts increase the proportion of Pt (1 1 1) and Pt (1 0 0) planes that facilitate H18-DBT dehydrogenation.

Synthesis of Bifunctional Ru-Pd Catalysts Following the Double Reduction Method: Hydrogenation/Dehydrogenation of Liquid Organic Hydrogen Carriers

Catalytic hydrogenation and dehydrogenation of liquid organic hydrogen carriers (LOHCs) have attracted immense attention as this is the most attractive strategy for the storage and release of hydrogen. Heterogeneous catalysts...

Recent Trends on the Dehydrogenation Catalysis of Liquid Organic Hydrogen Carrier (LOHC): A Review

Considering the expansion of the use of renewable energy in the future, the technology to store and transport hydrogen will be important. Hydrogen is gaseous at an ambient condition, diffuses easily, and its energy density is low. So liquid organic hydrogen carriers (LOHCs) have been proposed as a way to store hydrogen in high density. LOHC can store, transport, and use hydrogen at high density by hydrogenation and dehydrogenation cycles. In this review, we will focus on typical LOHCs, methylcyclohexane (MCH), 18H-dibenzyltoluene (DBT), and 12H-N-ethylcarbazole (NECZ), and summarize recent developments in dehydrogenation catalytic processes, which are key in this cycle.