One-Pass Hydrogenation of CO2 to Multibranched Isoparaffins over Bifunctional Zeolite-Based Catalysts

Tandem catalysts of different crystalline In2O3/sheet HZSM-5 zeolite for CO2 hydrogenation to aromatics

In tandem catalysts, not only good synergy between the two active components is required, but also the precise control of the spatial distribution between the two active components of metal oxides and zeolite is crucial for the migration and conversion of reaction intermediates in the direct conversion of CO2 to hydrocarbons. The correlation between the metal and the acidic site of zeolite has traditionally been simplified as "the closer, the better". However, it should be noted that this principle only holds true for a portion of tandem catalysts. Therefore, this paper studied the effect of different crystalline In2O3 (cubic phase, hexagonal phase, and mixed cubic/hexagonal phase) and sheet HZSM-5 zeolite tandem catalysts on the activity of CO2 hydrogenation reaction under different spatial distribution. The generalized gradient approximation (GGA) of density functional theory (DFT) were used to simulate the adsorption energy of CO2 by oxygen vacancy on c-In2O3(111) and h-In2O3(104) planes, it was found that Ov1 on c-In2O3(111) and Ov4 on h-In2O3(104) had the strongest adsorption energy for CO2. In addition, it has been observed that the proximity of the two active components (e.g., during mortar mixing) results in decreased catalytic performance. This is due to the migration of metal In, which neutralizes the acid sites of zeolites and leads to inefficient conversion of methanol reaction intermediates to aromatics. As a result, CO2 conversion and aromatic selectivity are decreased.

Advanced zeolite and ordered mesoporous silica-based catalysts for the conversion of CO2 to chemicals and fuels

For many years, capturing, storing or sequestering CO₂ from concentrated emission sources or from air has been a powerful technique for reducing atmospheric CO₂. Moreover, the use of CO₂ as a C1 building block to mitigate CO₂ emissions and, at the same time, produce sustainable chemicals or fuels is a challenging and promising alternative to meet global demand for chemicals and energy. Hence, the chemical incorporation and conversion of CO₂ into valuable chemicals has received much attention in the last decade, since CO₂ is an abundant, inexpensive, nontoxic, nonflammable, and renewable one-carbon building block. Nevertheless, CO₂ is the most oxidized form of carbon, thermodynamically the most stable form and kinetically inert. Consequently, the chemical conversion of CO₂ requires highly reactive, rich-energy substrates, highly stable products to be formed or harder reaction conditions. The use of catalysts constitutes an important tool in the development of sustainable chemistry, since catalysts increase the rate of the reaction without modifying the overall standard Gibbs energy in the reaction. Therefore, special attention has been paid to catalysis, and in particular to heterogeneous catalysis because of its environmentally friendly and recyclable nature attributed to simple separation and recovery, as well as its applicability to continuous reactor operations. Focusing on heterogeneous catalysts, we decided to center on zeolite and ordered mesoporous materials due to their high thermal and chemical stability and versatility, which make them good candidates for the design and development of catalysts for CO₂ conversion. In the present review, we analyze the state of the art in the last 25 years and the potential opportunities for using zeolite and OMS (ordered mesoporous silica) based materials to convert CO₂ into valuable chemicals essential for our daily lives and fuels, and to pave the way towards reducing carbon footprint. In this review, we have compiled, to the best of our knowledge, the different reactions involving catalysts based on zeolites and OMS to convert CO₂ into cyclic and dialkyl carbonates, acyclic carbamates, 2-oxazolidones, carboxylic acids, methanol, dimethylether, methane, higher alcohols (C₂₊OH), C₂₊ (gasoline, olefins and aromatics), syngas (RWGS, dry reforming of methane and alcohols), olefins (oxidative dehydrogenation of alkanes) and simple fuels by photoreduction. The use of advanced zeolite and OMS-based materials, and the development of new processes and technologies should provide a new impulse to boost the conversion of CO₂ into chemicals and fuels.

High-yield production of liquid fuels in CO2 hydrogenation on a zeolite-free Fe-based catalyst

Catalytic conversion of CO₂ to long-chain hydrocarbons with high activity and selectivity is appealing but hugely challenging. For conventional bifunctional catalysts with zeolite, poor coordination among catalytic activity, CO selectivity and target product selectivity often limit the long-chain hydrocarbon yield. Herein, we constructed a singly cobalt-modified iron-based catalyst achieving 57.8% C₅₊ selectivity at a CO₂ conversion of 50.2%. The C₅₊ yield reaches 26.7%, which is a record-breaking value. Co promotes the reduction and strengthens the interaction between raw CO₂ molecules and iron species. In addition to the carbide mechanism path, the existence of Co₃Fe₇ sites can also provide sufficient O-containing intermediate species (CO*, HCOO*, CO₃ ²*, and ) for subsequent chain propagation reaction via the oxygenate mechanism path. Reinforced cascade reactions between the reverse water gas shift (RWGS) reaction and chain propagation are achieved. The improved catalytic performance indicates that the KZFe-5.0Co catalyst could be an ideal candidate for industrial CO₂ hydrogenation catalysts in the future.

A review of catalytic hydrogenation of carbon dioxide: From waste to hydrocarbons

With the rapid development of industrial society and humankind’s prosperity, the growing demands of global energy, mainly based on the combustion of hydrocarbon fossil fuels, has become one of the most severe challenges all over the world. It is estimated that fossil fuel consumption continues to grow with an annual increase rate of 1.3%, which has seriously affected the natural environment through the emission of greenhouse gases, most notably carbon dioxide (CO₂). Given these recognized environmental concerns, it is imperative to develop clean technologies for converting captured CO₂ to high-valued chemicals, one of which is value-added hydrocarbons. In this article, environmental effects due to CO₂ emission are discussed and various routes for CO₂ hydrogenation to hydrocarbons including light olefins, fuel oils (gasoline and jet fuel), and aromatics are comprehensively elaborated. Our emphasis is on catalyst development. In addition, we present an outlook that summarizes the research challenges and opportunities associated with the hydrogenation of CO₂ to hydrocarbon products.

Hydrogenation of Carbon Dioxide to Value-Added Liquid Fuels and Aromatics over Fe-Based Catalysts Based on the Fischer–Tropsch Synthesis Route

Hydrogenation of CO2 to value-added chemicals and fuels not only effectively alleviates climate change but also reduces over-dependence on fossil fuels. Therefore, much attention has been paid to the chemical conversion of CO2 to value-added products, such as liquid fuels and aromatics. Recently, efficient catalysts have been developed to face the challenge of the chemical inertness of CO2 and the difficulty of C–C coupling. Considering the lack of a detailed summary on hydrogenation of CO2 to liquid fuels and aromatics via the Fischer–Tropsch synthesis (FTS) route, we conducted a comprehensive and systematic review of the research progress on the development of efficient catalysts for hydrogenation of CO2 to liquid fuels and aromatics. In this work, we summarized the factors influencing the catalytic activity and stability of various catalysts, the strategies for optimizing catalytic performance and product distribution, the effects of reaction conditions on catalytic performance, and possible reaction mechanisms for CO2 hydrogenation via the FTS route. Furthermore, we also provided an overview of the challenges and opportunities for future research associated with hydrogenation of CO2 to liquid fuels and aromatics.

Direct conversion of CO2 to a jet fuel over CoFe alloy catalysts

The direct conversion of carbon dioxide (CO₂) using green hydrogen is a sustainable approach to jet fuel production. However, achieving a high level of performance remains a formidable challenge due to the inertness of CO₂ and its low activity for subsequent C–C bond formation. In this study, we prepared a Na-modified CoFe alloy catalyst using layered double-hydroxide precursors that directly transforms CO₂ to a jet fuel composed of C₈–C₁₆ jet-fuel-range hydrocarbons with very high selectivity. At a temperature of 240°C and pressure of 3 MPa, the catalyst achieves an unprecedentedly high C₈–C₁₆ selectivity of 63.5% with 10.2% CO₂ conversion and a low combined selectivity of less than 22% toward undesired CO and CH₄. Spectroscopic and computational studies show that the promotion of the coupling reaction between the carbon species and inhibition of the undesired CO₂ methanation occur mainly due to the utilization of the CoFe alloy structure and addition of the Na promoter. This study provides a viable technique for the highly selective synthesis of eco-friendly and carbon-neutral jet fuel from CO₂.

•

An alloy is developed for the direct CO₂ hydrogenation to jet-fuel-range hydrocarbons

•

The selectivity of the hydrocarbons (63.5%) exceeds the theoretical maximum value

•

The CoFe alloy is the active phase in the coupling reaction between surface carbons

•

The CoFe alloy is a highly efficient catalyst in the presence of a sodium promoter

Designing a Multifunctional Catalyst for the Direct Production of Gasoline-Range Isoparaffins from CO2

The production of carbon-neutral fuels from CO₂ presents an avenue for causing an appreciable effect in terms of volume toward the mitigation of global carbon emissions. To that end, the production of isoparaffin-rich fuels is highly desirable. Here, we demonstrate the potential of a multifunctional catalyst combination, consisting of a methanol producer (InCo) and a Zn-modified zeolite beta, which produces a mostly isoparaffinic hydrocarbon mixture from CO₂ (up to ∼85% isoparaffin selectivity among hydrocarbons) at a CO₂ conversion of >15%. The catalyst combination was thoroughly characterized via an extensive complement of techniques. Specifically, operando X-ray absorption spectroscopy (XAS) reveals that Zn (which plays a crucial role of providing a hydrogenating function, improving the stability of the overall catalyst combination and isomerization performance) is likely present in the form of Zn₆O₆ clusters within the zeolite component, in contrast to previously reported estimations.

Towards the development of the emerging process of CO2 heterogenous hydrogenation into high-value unsaturated heavy hydrocarbons

The emerging process of CO₂ hydrogenation through heterogenous catalysis into important bulk chemicals provides an alternative strategy for sustainable and low-cost production of valuable chemicals, and brings an important chance for mitigating CO₂ emissions. Direct synthesis of the family of unsaturated heavy hydrocarbons such as α-olefins and aromatics via CO₂ hydrogenation is more attractive and challenging than the production of short-chain products to modern society, suffering from the difficult control between C-O activation and C-C coupling towards long-chain hydrocarbons. In the past several years, rapid progress has been achieved in the development of efficient catalysts for the process and understanding of their catalytic mechanisms. In this review, we provide a comprehensive, authoritative and critical overview of the substantial progress in the synthesis of α-olefins and aromatics from CO₂ hydrogenation via direct and indirect routes. The rational fabrication and design of catalysts, proximity effects of multi-active sites, stability and deactivation of catalysts, reaction mechanisms and reactor design are systematically discussed. Finally, current challenges and potential applications in the development of advanced catalysts, as well as opportunities of next-generation CO₂ hydrogenation techniques for carbon neutrality in future are proposed.

Recent Advances in Catalysis Based on Transition Metals Supported on Zeolites

This article reviews the current state and development of thermal catalytic processes using transition metals (TM) supported on zeolites (TM/Z), as well as the contribution of theoretical studies to understand the details of the catalytic processes. Structural features inherent to zeolites, and their corresponding properties such as ion exchange capacity, stable and very regular microporosity, the ability to create additional mesoporosity, as well as the potential chemical modification of their properties by isomorphic substitution of tetrahedral atoms in the crystal framework, make them unique catalyst carriers. New methods that modify zeolites, including sequential ion exchange, multiple isomorphic substitution, and the creation of hierarchically porous structures both during synthesis and in subsequent stages of post-synthetic processing, continue to be discovered. TM/Z catalysts can be applied to new processes such as CO₂ capture/conversion, methane activation/conversion, selective catalytic NO_x reduction (SCR-deNO_x), catalytic depolymerization, biomass conversion and H₂ production/storage.

Adjusting the CO2 hydrogenation pathway via the synergic effects of iron carbides and iron oxides

The synergic effects of iron carbides and iron oxides were used to adjust the reaction pathway to form alkenes or ethanol.

Improving thermal diffusivity of supported Fe-based Fischer–Tropsch catalysts to enhance long-chain hydrocarbon production

Fischer Tropsch synthesis (FTS) is highly exothermic so heat removal remains crucial. In this study, a rational procedure is examined to remove heat in the FTS by improving the thermal diffusivity on a series of Fe-based catalysts.