Propylene Epoxidation using Molecular Oxygen over Copper- and Silver-Based Catalysts: A Review

Electrifying oxidation of ethylene and propylene

Ethylene and propylene, as essential precursors in the chemical industry, have been playing a pivotal role in the production of various value-added chemicals that find wide applications in diverse sectors, such as polymer synthesis, lithium-ion battery electrolytes, antifreeze agents and pharmaceuticals. Nevertheless, traditional methods for olefin functionalization including chlorohydrination and epoxidation involve energy-intensive steps and environment-detrimental by-products. In contrast, electrocatalysis is emerging as a promising and sustainable approach for olefin oxidation via utilizing renewable electricity. Recent advancements in energy storage and conversion technologies have intensified the research efforts toward designing efficient electrocatalysts for the selective oxidation of ethylene and propylene, highlighting the shift towards more sustainable production methods. Herein, we summarize recent progress in the electrocatalytic oxidation of ethylene and propylene, focusing on achievement in catalyst design, reaction system selection and mechanism exploration. We figure out the advantages of different oxidation methods for improved performance and discuss the various types of catalysts like noble metals, non-noble metals, metal oxides and carbon-based materials, in facilitating the electrochemical oxidation of ethylene and propylene. Finally, we also provide an overview of current challenges and problems requiring further works.

Spatial decoupling of bromide-mediated process boosts propylene oxide electrosynthesis

The electrochemical synthesis of propylene oxide is far from practical application due to the limited performance (including activity, stability, and selectivity). In this work, we spatially decouple the bromide-mediated process to avoid direct contact between the anode and propylene, where bromine is generated at the anode and then transferred into an independent reactor to react with propylene. This strategy effectively prevents the side reactions and eliminates the interference to stability caused by massive alkene input and vigorously stirred electrolytes. As expected, the selectivity for propylene oxide reaches above 99.9% with a remarkable Faradaic efficiency of 91% and stability of 750-h (>30 days). When the electrode area is scaled up to 25 cm2, 262 g of pure propylene oxide is obtained after 50-h continuous electrolysis at 6.25 A. These findings demonstrate that the electrochemical bromohydrin route represents a viable alternative for the manufacture of epoxides.

Experimental Evidences on Magnetism-Covalent Bonding Interplay in Structural Properties of Solids and during Chemisorption

Valence electrons are one of the main players in solid catalysts and in catalytic reactions, since they are involved in several correlated phenomena like chemical bonding, magnetism, chemisorption, and bond activation. This is particularly true in the case of solid catalysts containing d-transition metals, which exhibit a wide range of magnetic phenomena, from paramagnetism to collective behaviour. Indeed, the electrons of the outer d-shells are, on one hand, involved in the formation of bonds within the structure of a catalyst and on its surface, and, on the other, they are accountable for the magnetic properties of the material. For this reason, the relationship between magnetism and heterogeneous catalysis has been a source of great interest since the mid-20th century. The subject has gained a lot of attention in the last decade, thanks to the orbital engineering of quantum spin-exchange interactions and to the widespread application of external magnetic fields as boosting tools in several catalytic reactions. The topic is discussed here through experimental examples and evidences of the interplay between magnetism and covalent bonding in the structure of solids and during the chemisorption process. Covalent bonding is discussed since it represents one of the strongest contributions to bonds encountered in materials.

Investigation of the oxygen coverage effect on the direct epoxidation of propylene over copper through DFT calculations

The direct epoxidation of propylene is one of the most important selective oxidation reactions in industry. The development of high-performance copper-based catalysts is the key to the selective oxidation technology and scientific research of propylene. The mechanism of propylene's partial oxidation catalyzed by Cu(111) under different oxygen coverage conditions was studied using density functional theory calculations and microkinetic modeling. We report here in detail two parallel reaction pathways: dehydrogenation and epoxidation. The transition states and energy distributions of the intermediates and products were calculated. The present results showed that propylene oxide (PO) selectivity was high under low oxygen coverage, and increasing the oxygen coverage would decrease the PO selectivity but increase the PO activity, and there was an inverse relationship between PO selectivity and activity. Increasing oxygen coverage would reduce the energy barrier for the C-O bond formation of C3H5O due to the weaker adsorption strength of C3H5, thus decreasing the PO formation selectivity. On the other hand, increasing oxygen coverage would reduce the energy barrier for the possible reaction steps of propylene epoxidation in general, and thus increasing the catalytic activity. It might be proposed that the active site for propylene epoxidation is the metallic copper or partially oxidized copper in terms of the change of PO formation selectivity with oxygen coverage.

Neutron Scattering Studies of Heterogeneous Catalysis

Understanding the structural dynamics/evolution of catalysts and the related surface chemistry is essential for establishing structure-catalysis relationships, where spectroscopic and scattering tools play a crucial role. Among many such tools, neutron scattering, though less-known, has a unique power for investigating catalytic phenomena. Since neutrons interact with the nuclei of matter, the neutron-nucleon interaction provides unique information on light elements (mainly hydrogen), neighboring elements, and isotopes, which are complementary to X-ray and photon-based techniques. Neutron vibrational spectroscopy has been the most utilized neutron scattering approach for heterogeneous catalysis research by providing chemical information on surface/bulk species (mostly H-containing) and reaction chemistry. Neutron diffraction and quasielastic neutron scattering can also supply important information on catalyst structures and dynamics of surface species. Other neutron approaches, such as small angle neutron scattering and neutron imaging, have been much less used but still give distinctive catalytic information. This review provides a comprehensive overview of recent advances in neutron scattering investigations of heterogeneous catalysis, focusing on surface adsorbates, reaction mechanisms, and catalyst structural changes revealed by neutron spectroscopy, diffraction, quasielastic neutron scattering, and other neutron techniques. Perspectives are also provided on the challenges and future opportunities in neutron scattering studies of heterogeneous catalysis.

Copper-Catalyzed Synthesis of 3-Aryl-9H-imidazo[1,5-a]indol-9-ones Using Oxygen as the Sole Oxidant

A three-component strategy was developed for 3-phenyl-9H-imidazo[1,5-a]indol-9-one preparation from indole-2-carboxaldehydes, aromatic aldehydes, and ammonium acetate under copper catalysis conditions. In this process, a new five-membered ring was formed and the C3 position in the indole substrate was selectively oxidized into a ketone skeleton using oxygen as the sole oxidant and ammonium acetate as the nitrogen source. Furthermore, same products also could be achieved from indole-2-carboxaldehydes and benzyl amines under similar reaction conditions.

Plasma-Induced Selective Propylene Epoxidation Using Water as the Oxygen Source

Propylene oxide (PO) is a critical gateway chemical used in large-scale production of plastics and many other compounds. In addition, PO is also used in many smaller-scale applications that require lower PO concentrations and volumes. These include its usage as a fumigant and disinfectant for food, a sterilizer for medical equipment, as well as in producing modified food such as starch and alginate. While PO is currently mostly produced in a large-scale propylene epoxidation chemical process, due to its toxic nature and high transport and storage costs, there is a strong incentive to develop PO production strategies that are well-suited for smaller-scale on-site applications. In this contribution, we designed a plasma-liquid interaction (PLI) catalytic process that uses only water and C₃H₆ as reactants to form PO. We show that hydrogen peroxide (H₂O₂) generated in the interactions of water with plasma serves as a critical oxidizing agent that can epoxidize C₃H₆ over a titanium silicate-1 (TS-1) catalyst dispersed in a water solution with a carbon-based selectivity of more than 98%. As the activity of this plasma C₃H₆ epoxidation system is limited by the rate of H₂O₂ production, strategies to improve H₂O₂ production were also investigated.

Remarkably Selective Propylene-Propane Separation Using a Copper Scorpionate

Propylene is a crucial building block to produce many industrial-scale chemicals including polypropylene. The separation of propylene from propane to reach the high-purity levels needed for downstream applications is a difficult task due to the close similarities in their physical properties. The olefin/paraffin separation including that involving propylene mainly relies on highly energy-intensive distillation processes and accounts for nearly 0.3% of the global energy consumption. The utility of a copper complex supported by a fluorinated bis(pyrazolyl)borate is demonstrated to accomplish the separation of propylene from propane repeatedly, under mild conditions with high selectivity. Complete characterization of a rare, copper(I) propylene complex is also reported including the molecular structure.

Recent applications of nanoparticles in organic transformations

A variation in the size of metal nanoparticles leads to a difference in their properties. As the size of metal nanoparticles decreases, the surface area increases which leads to an increase in the reactivity of metal nanoparticles. Metals like Au, Ag, Pd, and Pt have interesting properties when used in nanometric dimensions. They function efficiently in significant industrial processes as electrocatalysts and photocatalysts in various organic reactions. Recently, the green biosynthesis of nanoparticles has attracted the attention of researchers. With environmental pollution rising over the past few decades, metal nanoparticle catalysts could be the key to subdue the toxic effects. Being versatile, they can be used to degrade pollutants, develop solar cells, convert toxic nitroaromatic compounds, significantly reduce CO₂ emissions per unit of energy, and many more. Owing to their unique properties, nanoparticles have wide applications in biomedicine, for example, gold cages are promising agents for cancer diagnosis and therapy. Transition metal-oxide nanoparticles have been considered one of the best supercapacitor electrodes with high electrochemical performance. In this review, we have summarised fundamental concepts of metal nanoparticles over the last decade's main emphasis from 2010 to 2021. It focuses on the exceptional use of these nanocatalysts in various organic reactions. Additionally, we have also discussed the utility of these reactions and their crucial role in solving the problems of today. Through this article, we hope to provide the necessary framework needed to further advance the applications of metal nanoparticles as catalysts.

Facile Synthesis of Micro-Mesoporous Copper Phyllosilicate Supported on a Commercial Carrier and Its Application for Catalytic Hydrogenation of Nitro-Group in Trinitrobenzene

Development of novel Cu-based catalysts has become one of the frontiers in the catalytic production of platform chemicals and in environment protection. However, the known methods of their synthesis are too complicated and result in materials that cannot be used instantly as commercial catalysts. In the present work, a novel material has been synthesized by the facile method of deposition-precipitation using thermal hydrolysis of urea. The conditions for Cu phyllosilicate formation have been revealed (molar ratio urea:copper = 10, 92 °C, 8-11 h). The prepared Cu-based materials were studied by TG-DTA, SEM, TEM, XRD, N₂ adsorption and TPR-H₂ methods, and it was found that the material involves nanoparticles of micro-mesoporous copper phyllosilicate phase with a chrysocolla-like structure inside the pores of a commercial meso-macroporous silica carrier. The chrysocolla-like phase is first shown to be catalytically active in the selective reduction of the nitro-group in trinitrobenzene to an amino-group with molecular hydrogen. Complete conversion of trinitrobenzene with a high yield of amines has been achieved in short time under relatively mild conditions (170 °C, 1.3 MPa) of nitroarene hydrogenation over a copper catalyst.

Enhanced Selectivity of the Propylene Epoxidation Reaction on a Cu Monolayer Surface via Eley-Rideal Mechanism

The aerobic oxidation of propylene to selectively achieve propylene oxide (PO) is a challenging reaction in catalysis. Therefore, an active catalyst which shows enhanced PO selectivity is extremely desired. In the present investigation, an attempt has been made to explore the catalytic activity of a mono-atomically thin two-dimensional (2D) hexagonal (HX) Cu layer for selective propylene epoxidation using molecular O₂ with the aid of density functional theory calculations. The results reveal that the conversion of propylene to PO via Eley-Rideal mechanism is an exoergic and barrierless reaction on the O₂ pre-adsorbed Cu monolayer. The Pauli energy component plays a decisive role for barrierless reaction whereas the electrostatic and orbital contribution governs the energetic stability of PO. Car-Parrinello molecular dynamics (CPMD) simulation reinforces the outcomes of climbing image nudged elastic band (CI-NEB) calculation. Further, the formation of oxametallacycle OMC-2 (0.47 eV) is kinetically favourable over OMC-1 (0.87 eV) and AHS (0.50 eV) on O pre-adsorbed 2D HX Cu. Interestingly, the energy barrier for the conversion of OMC-2 to PO (0.70 eV) is considerably low in comparison with the acetone formation (0.90 eV). Therefore, it is worth to mention that the 2D HX Cu surface provides a promising platform for selective propylene epoxidation.

Determining the inherent selectivity for carbon radical hydroxylation versus halogenation with high-spin oxoiron(iv)-halide complexes: a concerted rebound step

A synthetic iron model can process both halogenation and hydroxylation with vague selectivity, which is different from halogenase even though these structures are used for the simulation of halogenase. The key factor of the synthetic oxo-iron model mediated hydroxylation or the halogenation is still under debate. Herein density functional theory calculation is used to investigate the hydroxylation versus halogenation of propylene by the complex [Fe^IV(O)(TQA)(X)]⁺ (X = F, Cl, Br). Our results suggest that a concerted rebound mechanism (between the -X and the hydroxyl ligands after the hydrogen abstraction) leads to the formation of two different kinds of products.

DFT calculation for the hydroxylation versus halogenation of propylene by [Fe^IV(O)(TQA)X]⁺ (X = F, Cl and Br) reveals that after hydrogen abstraction, halogen and oxygen rebound reactions are a synergistic process.

Opportunities and Challenges in Electrolytic Propylene Epoxidation

Propylene oxide (PO) is an important chemical. So far, its synthesis protocol relies on expensive oxidants. In contrast, direct epoxidation of propylene (DEP) using molecular oxygen is considered ideal for PO synthesis. Unfortunately, DEP has not met industrial demands due to the low propylene conversion and high side-product selectivity for known catalysts. Instead of a thermal process using molecular oxygen, electrolytic propylene oxidation can synthesize PO at room temperature, using the atomic oxygen generated from water-splitting. Herein, using density functional theory, surface Pourbaix analysis, scaling relation analysis, and microkinetic modeling, we show that (i) propylene epoxidation is facile on weak-binding catalysts if reactive atomic oxygen preexists; (ii) electrolytic epoxidation is facile to provide atomic oxygen for epoxidation, while hydroperoxyl formation does not overwhelm the epoxidation process at the potential of interest; (iii) propylene dehydrogenation is a competing step that forms side products. Finally, we discuss the opportunities and challenges of this green PO synthesis method.

Direct Propylene Epoxidation with Molecular Oxygen over Cobalt-Containing Zeolites

Direct propylene epoxidation with molecular oxygen is a dream reaction with 100% atom economy, but aerobic epoxidation is challenging because of the undesired over-oxidation and isomerization of epoxide products. Herein, we report the construction of uniform cobalt ions confined in faujasite zeolite, namely, Co@Y, which exhibits unprecedented catalytic performance in the aerobic epoxidation of propylene. Propylene conversion of 24.6% is achieved at propylene oxide selectivity of 57% at 773 K, giving a state-of-the-art propylene oxide production rate of 4.7 mmol/g_cat/h. The catalytic performance of Co@Y is very stable, and no activity loss can be observed for over 200 h. Spectroscopic analyses reveal the details of molecular oxygen activation on isolated cobalt ions, followed by interaction with propylene to produce epoxide, in which the Co²⁺-Co^δ+-Co²⁺ (2 < δ < 3) redox cycle is involved. The reaction pathway of propylene oxide and byproduct acrolein formation from propylene epoxidation is investigated by density functional theory calculations, and the unique catalytic performance of Co@Y is interpreted. This work presents an explicit example of constructing specific transition-metal ions within the zeolite matrix toward selective catalytic oxidations.

Facet-dependent electrooxidation of propylene into propylene oxide over Ag3PO4 crystals

The electrooxidation of propylene into propylene oxide under ambient conditions represents an attractive approach toward propylene oxide. However, this process suffers from a low yield rate over reported electrocatalysts. In this work, we develop an efficient electrocatalyst of Ag₃PO₄ for the electrooxidation of propylene into propylene oxide. The Ag₃PO₄ cubes with (100) facets exhibit the highest yield rate of 5.3 g_PO m⁻² h⁻¹ at 2.4 V versus reversible hydrogen electrode, which is 1.6 and 2.5 times higher than those over Ag₃PO₄ rhombic dodecahedra with (110) facets and tetrahedra with (111) facets, respectively. The theoretical calculations reveal that the largest polarization of propylene on Ag₃PO₄ (100) facets is beneficial to break the symmetric π bonding and facilitate the formation of C-O bond. Meanwhile, Ag₃PO₄(100) facets exhibit the lowest adsorption energies of ^*C₃H₆ and ^*OH, inducing the lowest energy barrier of the rate-determining step and thus accounting for the highest catalytic performance.

The electrooxidation of propylene into propylene oxide is important in many industrial sectors. Here, the authors demonstrate efficient and facet-selective formation of propylene oxide using Ag₃PO₄ cubes and investigate the reaction mechanism.

Peroxide activation by selenium-doped graphite

Selenium-doped graphitic material has shown GPx-like activity and carried out epoxidation of various aromatic and aliphatic alkenes using H2O2, a green oxidant.

Selective formation of propan-1-ol from propylene via a chemical looping approach

A novel chemical looping approach for propan-1-ol production from propylene.

Effect of Potassium for Propylene Epoxidation on Cu2O(111) by Molecular Oxygen: A DFT Study

In the present work, spin-polarized density functional theory (DFT) calculations with a Hubbard U correction were employed to investigate the effect of potassium for propylene epoxidation on Cu2O(111) surface by...

Activation of molecular oxygen over Mn-doped La2CuO4 perovskite for direct epoxidation of propylene

The synergetic interaction between manganese and copper in LaMn0.5Cu0.5O3 significantly promoted the epoxidation of propylene at lower temperature by converting the active sites from oxygen vacancies to Cu active sites of Cu–O–Mn.

Silver nanomaterials: synthesis and (electro/photo) catalytic applications

In view of their unique characteristics and properties, silver nanomaterials (Ag NMs) have been used not only in the field of nanomedicine but also for diverse advanced catalytic technologies. In this comprehensive review, light is shed on general synthetic approaches encompassing chemical reduction, sonochemical, microwave, and thermal treatment among the preparative methods for the syntheses of Ag-based NMs and their catalytic applications. Additionally, some of the latest innovative approaches such as continuous flow integrated with MW and other benign approaches have been emphasized that ultimately pave the way for sustainability. Moreover, the potential applications of emerging Ag NMs, including sub nanomaterials and single atoms, in the field of liquid-phase catalysis, photocatalysis, and electrocatalysis as well as a positive role of Ag NMs in catalytic reactions are meticulously summarized. The scientific interest in the synthesis and applications of Ag NMs lies in the integrated benefits of their catalytic activity, selectivity, stability, and recovery. Therefore, the rise and journey of Ag NM-based catalysts will inspire a new generation of chemists to tailor and design robust catalysts that can effectively tackle major environmental challenges and help to replace noble metals in advanced catalytic applications. This overview concludes by providing future perspectives on the research into Ag NMs in the arena of electrocatalysis and photocatalysis.

Fine cubic Cu2O nanocrystals as highly selective catalyst for propylene epoxidation with molecular oxygen

Propylene epoxidation with O₂ to propylene oxide is a very valuable reaction but remains as a long-standing challenge due to unavailable efficient catalysts with high selectivity. Herein, we successfully explore 27 nm-sized cubic Cu₂O nanocrystals enclosed with {100} faces and {110} edges as a highly selective catalyst for propylene epoxidation with O₂, which acquires propylene oxide selectivity of more than 80% at 90–110 °C. Propylene epoxidation with weakly-adsorbed O₂ species at the {110} edge sites exhibits a low barrier and is the dominant reaction occurring at low reaction temperatures, leading to the high propylene oxide selectivity. Such a weakly-adsorbed O₂ species is not stable at high reaction temperatures, and the surface lattice oxygen species becomes the active oxygen species to participate in propylene epoxidation to propylene oxide and propylene partial oxidation to acrolein at the {110} edge sites and propylene combustion to CO₂ at the {100} face sites, which all exhibit high barriers and result in decreased propylene oxide selectivity.

Direct propylene epoxidation with O₂ to form propylene oxide (PO) selectively is a challenge. Here, the authors explore 27 nm-sized cubic Cu₂O nanocrystals as thermocatalysts for this reaction which facilitate PO production with high selectivity, >80%, at moderate temperatures of 90–110 °C.

Role of Organic Fluoride Salts in Stabilizing Niobium Oxo-Clusters Catalyzing Epoxidation

We present here that easily available organic salts can stabilize/modify niobium (Nb) oxo-clusters. The as-synthesized Nb oxo-clusters have been characterized by various methods. These Nb oxo-clusters were catalytically active for the epoxidation of allylic alcohols and olefins with H₂O₂ as an oxidant. Notably, Nb-OC@TBAF-0.5 appeared as highly dispersed nanosized particles and showed the highest catalytic activity, which can be attributed to the following reasons on the basis of characterization. First, the strong coordination of fluorine ions with Nb sites and the steric protection with bulky organic cations led to high stabilization and dispersion of the oxo-clusters in the course of the reaction. Second, a hydrogen-bond interaction between the coordinated fluorine atom and the -OH group of allylic alcohol favored the epoxidation reaction. Third, the electron density of Nb sites decreased due to the strong electron-withdrawing ability of F^- adjacent to Nb sites, thus promoting the electrophilic oxygen transfer to the C═C bond.

Precisely Engineered Supported Gold Clusters as a Stable Catalyst for Propylene Epoxidation

Designing a stable and selective catalyst with high H₂ utilisation is of pivotal importance for the direct gas-phase epoxidation of propylene. This work describes a facile one-pot methodology to synthesise ligand-stabilised sub-nanometre gold clusters immobilised onto a zeolitic support (TS-1) to engineer a stable Au/TS-1 catalyst. A non-thermal O₂ plasma technique is used for the quick removal of ligands with limited increase in particle size. Compared to untreated Au/TS-1 catalysts prepared using the deposition precipitation method, the synthesised catalyst exhibits improved catalytic performance, including 10 times longer lifetime (>20 days), increased PO selectivity and hydrogen efficiency in direct gas phase epoxidation. The structure-stability relationship of the catalyst is illustrated using multiple characterisation techniques, such as XPS, ³¹ P MAS NMR, DR-UV/VIS, HRTEM and TGA. It is hypothesised that the ligands play a guardian role in stabilising the Au particle size, which is vital in this reaction. This strategy is a promising approach towards designing a more stable heterogeneous catalyst.

Directing transition metal-based oxygen-functionalization catalysis

This review presents the recent progress of oxygen functionalization reactions based on non-electrochemical (conventional organic synthesis) and electrochemical methods. Although both methods have their advantages and limitations, the former approach has been used to synthesize a broader range of organic substances as the latter is limited by several factors, such as poor selectivity and high energy cost. However, because electrochemical methods can replace harmful terminal oxidizers with external voltage, organic electrosynthesis has emerged as greener and more eco-friendly compared to conventional organic synthesis. The progress of electrochemical methods toward oxygen functionalization is presented by an in-depth discussion of different types of electrically driven-chemical organic synthesis, with particular attention to recently developed electrochemical systems and catalyst designs. We hope to direct the attention of readers to the latest breakthroughs of traditional oxygen functionalization reactions and to the potential of electrochemistry for the transformation of organic substrates to useful end products.

The Lord of the Chemical Rings: Catalytic Synthesis of Important Industrial Epoxide Compounds

The epoxidized group, also known as the oxirane group, can be considered as one of the most crucial rings in chemistry. Due to the high ring strain and the polarization of the C–O bond in this three-membered ring, several reactions can be carried out. One can see such a functional group as a crucial intermediate in fuels, polymers, materials, fine chemistry, etc. Literature covering the topic of epoxidation, including the catalytic aspect, is vast. No review articles have been written on the catalytic synthesis of short size, intermediate and macro-molecules to the best of our knowledge. To fill this gap, this manuscript reviews the main catalytic findings for the production of ethylene and propylene oxides, epichlorohydrin and epoxidized vegetable oil. We have selected these three epoxidized molecules because they are the most studied and produced. The following catalytic systems will be considered: homogeneous, heterogeneous and enzymatic catalysis.

Mesoporogen-Free Strategy to Construct Hierarchical TS-1 in a Highly Concentrated System for Gas-Phase Propene Epoxidation with H2 and O2

Hierarchical TS-1 has attracted enormous attention from both academia and industry due to its remarkable catalytic performance in epoxidation reactions. However, sustainable synthesis of hierarchical-nanosized TS-1 without mesoporogens is still challenging. In this work, we report a facile and mesoporogen-free strategy to simultaneously manipulate pore structure and particle size of TS-1 employing the concentrated system. Taking advantage of the suspended nuclei in the concentrated system as confirmed by the DLS-PSD and atomic force microscopy, the novel TS-1 is demonstrated to have higher Ti concentration on surface, higher surface area (539 m²/g), abundant mesopores, and reduced crystal size (ca. 150 nm). Moreover, this Au-Ti bifunctional catalyst shows a good PO formation rate with enhanced catalytic stability due to the hierarchical structure. This strategy opens a novel way for the green synthesis of hierarchical-nanosized TS-1 and facilitates industrial development of the Au/TS-1 catalyst for propene epoxidation.

Atomically dispersed Ru in Pt3Sn intermetallic alloy as an efficient methanol oxidation electrocatalyst

We successfully fabricate a novel concave nanostructure that is composed of atomically dispersed Ru atoms in Pt₃Sn nanoconcaves (Ru-Pt₃Sn NCs), which shows enhanced performance in methanol electroxidation compared to commercial Pt/C. This could be ascribed to the stable intermetallic structure and active surface structure, as well as the synergy among Pt, Sn and Ru.

The effect of size, charge state and composition on the binding of propene to yttrium-doped gold clusters

The catalytic activity of metal clusters can be easily tuned by their size, charge state, or the introduction of dopant atoms. Here, the dopant-, charge- and size-dependent propene adsorption on gold (Au_n⁺) and yttrium doped gold (Au_n−1Y⁺) clusters (n = 4–20) was investigated using combined gas-phase reaction studies and density functional theory computations. The increased charge transfer between the cluster and propene in the cationic clusters considerably enhances the propene binding on both pure and yttrium-doped species, compared to their neutral cluster counterparts, while yttrium-doping lowers the propene binding strength in a size-dependent way compared to the pure gold clusters. Chemical bonding and energy decomposition analysis indicate that there is no covalent bond between the cluster and propene. The preferred propene binding site on a cluster is indicated by the large lobes of its LUMO, together with the low coordination number of the adsorption site. In small yttrium-doped gold clusters propene can not only bind to the electron-deficient yttrium atom, but also to the partially positively-charged gold atoms. Therefore, by controlling the charge of the clusters, as well as by introducing yttrium dopants, the propene binding strength can be tuned, opening the route for new catalytic applications.

The catalytic activity of metal clusters can be easily tuned by their size, charge state, or the introduction of dopant atoms.

Crystal-plane-controlled selectivity and activity of copper catalysts in propylene oxidation with O2

The selectivity of PO is inversely proportional to its activity on copper catalysts.