Structure Determination of Boron-Based Oxidative Dehydrogenation Heterogeneous Catalysts with Ultra-High Field 35.2 T 11B Solid-State NMR Spectroscopy

The Synthesis of Three-Dimensional Hexagonal Boron Nitride as the Reinforcing Phase of Polymer-Based Electrolyte for All-Solid-State Li Metal Batteries

Powdery hexagonal boron nitride (h-BN), as an important material for electrochemical energy storage, has been typically synthesized in bulk and one/two-dimensional (1/2D) nanostructured morphologies. However, until now, no method has been developed to synthesize powdery three-dimensional (3D) h-BN. This work introduces a novel NaCl-glucose-assisted strategy to synthesize micron-sized 3D h-BN with a honeycomb-like structure and its proposed formation mechanism. We propose that NaCl acts as the template of 3D structure and promotes the nitridation reaction by adsorbing NH3 . Glucose facilitates the homogeneous coating of boric acid onto the NaCl surface via functionalizing the NaCl surface. During the nitridation reaction, boron oxides (BO4 and BO3 ) form from a dehydration reaction of boric acid, which is then reduced to O2 -B-N and O-B-N2 intermediates before finally being reduced to BN3 by NH3 . When incorporated into polyethylene oxide-based electrolytes for Li metal batteries, 5 wt % of 3D h-BN significantly enhances ionic conductivity and mechanical strength. Consequently, this composite electrolyte demonstrates superior electrochemical stability. It delivers 300 h of stable cycles in the Li//Li cell at 0.1 mA cm-2 and retains 89 % of discharge capacity (138.9 mAh g-1 ) after 100 cycles at 1 C in the LFP//Li full cell.

Tracking Active Phase Behavior on Boron Nitride during the Oxidative Dehydrogenation of Propane Using Operando X-ray Raman Spectroscopy

Hexagonal boron nitride (hBN) is a highly selective catalyst for the oxidative dehydrogenation of propane (ODHP) to propylene. Using a variety of ex situ characterization techniques, the activity of the catalyst has been attributed to the formation of an amorphous boron oxyhydroxide surface layer. The ODHP reaction mechanism proceeds via a combination of surface mediated and gas phase propagated radical reactions with the relative importance of both depending on the surface-to-void-volume ratio. Here we demonstrate the unique capability of operando X-ray Raman spectroscopy (XRS) to investigate the oxyfunctionalization of the catalyst under reaction conditions (1 mm outer diameter reactor, 500 to 550 °C, P = 30 kPa C3H8, 15 kPa O2, 56 kPa He). We probe the effect of a water cofeed on the surface of the activated catalyst and find that water removes boron oxyhydroxide from the surface, resulting in a lower reaction rate when the surface reaction dominates and an enhanced reaction rate when the gas phase contribution dominates. Computational description of the surface transformations at an atomic-level combined with high precision XRS spectra simulations with the OCEAN code rationalize the experimental observations. This work establishes XRS as a powerful technique for the investigation of light element-containing catalysts under working conditions.

Rationalizing kinetic behaviors of isolated boron sites catalyzed oxidative dehydrogenation of propane

Boron-based catalysts exhibit high alkene selectivity in oxidative dehydrogenation of propane (ODHP) but the mechanistic understanding remains incomplete. In this work, we show that the hydroxylation of framework boron species via steaming not only enhances the ODHP rate on both B-MFI and B-BEA, but also impacts the kinetics of the reaction. The altered activity, propane reaction order and the activation energy could be attributed to the hydrolysis of framework [B(OSi≡)3] unit to [B(OSi≡)3-x(OH···O(H)Si≡)x] (x = 1, 2, "···" represents hydrogen bonding). DFT calculations confirm that hydroxylated framework boron sites could stabilize radical species, e.g., hydroperoxyl radical, further facilitating the gas-phase radical mechanism. Variations in the contributions from gas-phase radical mechanisms in ODHP lead to the linear correlation between activation enthalpy and entropy on borosilicate zeolites. Insights gained in this work offer a general mechanistic framework to rationalize the kinetic behavior of the ODHP on boron-based catalysts.

Mechanistic Insights into Radical-Induced Selective Oxidation of Methane over Nonmetallic Boron Nitride Catalysts

Boron-based nonmetallic materials (such as B₂O₃ and BN) emerge as promising catalysts for selective oxidation of light alkanes by O₂ to form value-added products, resulting from their unique advantage in suppressing CO₂ formation. However, the site requirements and reaction mechanism of these boron-based catalysts are still in vigorous debate, especially for methane (the most stable and abundant alkane). Here, we show that hexagonal BN (h-BN) exhibits high selectivities to formaldehyde and CO in catalyzing aerobic oxidation of methane, similar to Al₂O₃-supported B₂O₃ catalysts, while h-BN requires an extra induction period to reach a steady state. According to various structural characterizations, we find that active boron oxide species are gradually formed in situ on the surface of h-BN, which accounts for the observed induction period. Unexpectedly, kinetic studies on the effects of void space, catalyst loading, and methane conversion all indicate that h-BN merely acts as a radical generator to induce gas-phase radical reactions of methane oxidation, in contrast to the predominant surface reactions on B₂O₃/Al₂O₃ catalysts. Consequently, a revised kinetic model is developed to accurately describe the gas-phase radical feature of methane oxidation over h-BN. With the aid of in situ synchrotron vacuum ultraviolet photoionization mass spectroscopy, the methyl radical (CH₃^•) is further verified as the primary reactive species that triggers the gas-phase methane oxidation network. Theoretical calculations elucidate that the moderate H-abstraction ability of predominant CH₃^• and CH₃OO^• radicals renders an easier control of the methane oxidation selectivity compared to other oxygen-containing radicals generally proposed for such processes, bringing deeper understanding of the excellent anti-overoxidation ability of boron-based catalysts.

Antiexfoliating h-BN⊃In2O3 Catalyst for Oxidative Dehydrogenation of Propane in a High-Temperature and Water-Rich Environment

Hexagonal boron nitride (h-BN) is regarded as one of the most efficient catalysts for oxidative dehydrogenation of propane (ODHP) with high olefin selectivity and productivity. However, the loss of the boron component under a high concentration of water vapor and high temperature seriously hinders its further development. How to make h-BN a stable ODHP catalyst is one of the biggest scientific challenges at present. Herein, we construct h-BN⊃xIn₂O₃ composite catalysts through the atomic layer deposition (ALD) process. After high-temperature treatment in ODHP reaction conditions, the In₂O₃ nanoparticles (NPs) are dispersed on the edge of h-BN and observed to be encapsulated by ultrathin boron oxide (BO_x) overlayer. A novel strong metal oxide-support interaction (SMOSI) effect between In₂O₃ NPs and h-BN is observed for the first time. The material characterization reveals that the SMOSI not only improves the interlayer force between h-BN layers with a pinning model but also reduces the affinity of the B-N bond toward O^• for inhibiting oxidative cutting of h-BN into fragments at a high temperature and water-rich environment. With the pinning effect of the SMOSI, the catalytic stability of h-BN⊃70In₂O₃ has been extended nearly five times than that of pristine h-BN, and the intrinsic olefin selectivity/productivity of h-BN is well maintained.

Subsurface nickel boosts the low-temperature performance of a boron oxide overlayer in propane oxidative dehydrogenation

Oxidative dehydrogenation of propane is a promising technology for the preparation of propene. Boron-based nonmetal catalysts exhibit remarkable selectivity toward propene and limit the generation of CO_x byproducts due to unique radical-mediated C-H activation. However, due to the high barrier of O-H bond cleavage in the presence of O₂, the radical initialization of the B-based materials requires a high temperature to proceed, which decreases the thermodynamic advantages of the oxidative dehydrogenation reaction. Here, we report that the boron oxide overlayer formed in situ over metallic Ni nanoparticles exhibits extraordinarily low-temperature activity and selectivity for the ODHP reaction. With the assistance of subsurface Ni, the surface specific activity of the BO_x overlayer reaches 93 times higher than that of bare boron nitride. A mechanistic study reveals that the strong affinity of the subsurface Ni to the oxygen atoms reduces the barrier of radical initiation and thereby balances the rates of the BO-H cleavage and the regeneration of boron hydroxyl groups, accounting for the excellent low-temperature performance of Ni@BO_x/BN catalysts.

An Atomistic Picture of Boron Oxide Catalysts for Oxidative Dehydrogenation Revealed by Ultrahigh Field 11B-17O Solid-State NMR Spectroscopy

Boron oxide/hydroxide supported on oxidized activated carbon (B/OAC) was shown to be an inexpensive catalyst for the oxidative dehydrogenation (ODH) of propane that offers activity and selectivity comparable to boron nitride. Here, we obtain an atomistic picture of the boron oxide/hydroxide layer in B/OAC by using 35.2 T ¹¹B and ¹⁷O solid-state NMR experiments. NMR spectra measured at 35.2 T resolve the boron and oxygen sites due to narrowing of the central-transition powder patterns. A 35.2 T 2D ¹¹B{¹⁷O} dipolar heteronuclear correlation NMR spectrum revealed the structural connectivity between boron and oxygen atoms. The approach outlined here should be generally applicable to determine atomistic structures of heterogeneous catalysts containing quadrupolar nuclei.

Engineering O-O Species in Boron Nitrous Nanotubes Increases Olefins for Propane Oxidative Dehydrogenation

Boron nitride (BN) has been widely studied as an efficient catalyst for oxidative propane dehydrogenation (OPDH). Oxygen-containing boron species (e.g., BO·, B(OH)_xO_3-x) are generally considered as the active centers in BN for OPDH. Here, we show an effective progressive substitution strategy toward the development of boron-oxygen-nitrogen nanotubes (BONNTs) enriched with O-O species as a highly active, selective, and stable catalyst for OPDH. At 525 °C, an olefin yield of 48.6% is achieved over BONNTs with a propane conversion of 64.4%, 2.8 times that of boron nitrogen nanotubes (BNNTs). Even after reaction for 150 h (475 °C), BONNTs exhibit good olefin yield. Both the B(OH)_xO_3-x and O-O species that coexist in the BONNT catalyst are demonstrated as active centers, which differs from the B(OH)_xO_3-x one in BNNTs. Based on catalytic results, propane and oxygen alternate treatment experiments, and theoretical calculations, the O-O center is more favorable for producing both propylene (C₃₌) and ethylene (C₂₌), which experiences a dehydration pathway and two possible reaction paths with a lower energy barrier to yield olefins, while B(OH)_xO_3-x is mainly responsible for producing few C₃₌.

The chemical evolution of solid electrolyte interface in sodium metal batteries

The solid electrolyte interface (SEI) formed on the anode is one of the key factors that determine the life span of sodium metal batteries (SMBs). However, the continuous evolution of SEI during charging/discharging processes complicates the fundamental understanding of its chemistry and structure. In this work, we studied the underlying mechanisms of the protection effect offered by the SEI derived from sodium difluoro(oxalato)borate (NaDFOB). In situ nuclear magnetic resonance (NMR) shows that the prior reduction of DFOB anion contributes to the SEI formation, and it suppresses the decomposition of carbonate solvents. Depth-profiling x-ray photoelectron spectroscopy and high-resolution solid-state NMR reveal that the DFOB anion is gradually turned into borate and fluoride-rich SEI with cycling. The protection effect of SEI reaches the optimum at 50 cycles, which triples the life span of SMB. The detailed investigations provide valuable guidelines for the SEI engineering.

Application of solid-state NMR techniques for structural characterization of metal-organic frameworks

Solid-state NMR can afford the structural information about the chemical composition, local environment, and spatial coordination at the atomic level, which has been extensively applied to characterize the detailed structure and host-guest interactions in metal-organic frameworks (MOFs). In this review, recent advances for the structural characterizations of MOFs using versatile solid-state NMR techniques were briefly introduced. High-field sensitivity-enhanced solid-state NMR method enabled the direct observation of metal centers in MOFs containing low-γ nuclei. Two-dimensional (2D) homo- and hetero-nuclear correlation MAS NMR experiments provided the spatial proximity among linkers, metal clusters and the introduced guest molecules. Moreover, quantitative measurement of inter-nuclear distances using solid-state NMR provided valuable structural information about the connectivity geometry as well as the host-guest interactions within MOFs. Furthermore, solid-state NMR has exhibited great potential for unraveling the structure property of MOFs containing paramagnetic metal centers.

Water-Tolerant Boron-Substituted MCM-41 for Oxidative Dehydrogenation of Propane

Boron-based catalysts for oxidative dehydrogenation of propane (ODHP) have displayed excellent olefin selectivity. However, the drawback of deboronation leading to catalyst deactivation limited their scalable applications. Hereby, a series of mesoporous B-MCM-41 (BM-x, B/Si = 0.015-0.147) catalysts for ODHP were prepared by a simple hydrothermal synthesis method. It was found that propane conversion was increased and the initial reaction temperature was reduced with an increase of boron content, and the optimal values appeared on BM-2.0 (B/Si = 0.062), while olefins' (ethylene and propylene) selectivity was maintained at ca. 70-80%. Most importantly, BM-1.0 (B/Si = 0.048) exhibited favorable activity, stability, and water tolerance after washing treatment or long-time operation (e.g., propane conversion of ca. 15% and overall olefin selectivity of ca. 80% at 550 °C) because its high structural stability prevented boron leaches. These features were identified by X-ray diffraction (XRD), N₂ physisorption, inductively coupled plasma-mass spectrometry (ICP-MS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and solid-state magic-angle-spinning nuclear magnetic resonance (MAS NMR) spectroscopy studies. The tri-coordinated B-OH species incorporated into the mesoporous silica framework are considered to be the active sites for ODHP.

NMR spectroscopy probes microstructure, dynamics and doping of metal halide perovskites

Solid-state magic-angle spinning NMR spectroscopy is a powerful technique to probe atomic-level microstructure and structural dynamics in metal halide perovskites. It can be used to measure dopant incorporation, phase segregation, halide mixing, decomposition pathways, passivation mechanisms, short-range and long-range dynamics, and other local properties. This Review describes practical aspects of recording solid-state NMR data on halide perovskites and how these afford unique insights into new compositions, dopants and passivation agents. We discuss the applicability, feasibility and limitations of ¹H, ¹³C, ¹⁵N, ¹⁴N, ¹³³Cs, ⁸⁷Rb, ³⁹K, ²⁰⁷Pb, ¹¹⁹Sn, ¹¹³Cd, ²⁰⁹Bi, ¹¹⁵In, ¹⁹F and ²H NMR in typical experimental scenarios. We highlight the pivotal complementary role of solid-state mechanosynthesis, which enables highly sensitive NMR studies by providing large quantities of high-purity materials of arbitrary complexity and of chemical shifts calculated using density functional theory. We examine the broader impact of solid-state NMR on materials research and how its evolution over seven decades has benefitted structural studies of contemporary materials such as halide perovskites. Finally, we summarize some of the open questions in perovskite optoelectronics that could be addressed using solid-state NMR. We, thereby, hope to stimulate wider use of this technique in materials and optoelectronics research.

Dual Active Sites on Molybdenum/ZSM-5 Catalyst for Methane Dehydroaromatization: Insights from Solid-State NMR Spectroscopy

Methane dehydroaromatization (MDA) on Mo/ZSM-5 zeolite catalyst is promising for direct transformation of natural gas. Understanding the nature of active sites on Mo/ZSM-5 is a challenge for applications. Herein, using 1 H{95 Mo} double-resonance solid-state NMR spectroscopy, we identify proximate dual active sites on Mo/ZSM-5 catalyst by direct observation of internuclear spatial interaction between Brønsted acid site and Mo species in zeolite channels. The acidic proton-Mo spatial interaction is correlated with methane conversion and aromatics formation in the MDA process, an important factor in determining the catalyst activity and lifetime. The evolution of olefins and aromatics in Mo/ZSM-5 channels is monitored by detecting their host-guest interactions with both active Mo sites and Brønsted acid sites via 1 H{95 Mo} double-resonance and two-dimensional 1 H-1 H correlation NMR spectroscopy, revealing the intermediate role of olefins in hydrocarbon pool process during the MDA reaction.