Preparation of Solid Solution and Layered IrOx–Ni(OH)2 Oxygen Evolution Catalysts: Toward Optimizing Iridium Efficiency for OER

Acidic Oxygen Evolution Reaction: Fundamental Understanding and Electrocatalysts Design

Water electrolysis driven by "green electricity" is an ideal technology to realize energy conversion and store renewable energy into hydrogen. With the development of proton exchange membrane (PEM), water electrolysis in acidic media suitable for many situations with an outstanding advantage of high gas purity has attracted significant attention. Compared with hydrogen evolution reaction (HER) in water electrolysis, oxygen evolution reaction (OER) is a kinetic sluggish process that needs a higher overpotential. Especially in acidic media, OER process poses higher requirements for the electrocatalysts, such as high efficiency, high stability and low costs. This review focuses on the acidic OER electrocatalysis, reaction mechanisms, and critical parameters used to evaluate performance. Especially the modification strategies applied in the design and construction of new-type electrocatalysts are also summarized. The characteristics of traditional noble metal-based electrocatalysts and the noble metal-free electrocatalysts developed in recent decades are compared and discussed. Finally, the current challenges for the most promising acidic OER electrocatalysts are presented, together with a perspective for future water electrolysis.

Improving the electrocatalytic hydrogen evolution reaction through a magnetic field and hydrogen peroxide production co-assisted Ni/Fe3O4@poly(3,4-ethylene-dioxythiophene)/Ni electrode

The production of high-purity hydrogen using surplus electrical energy and abundant water resources has immense potential in mitigating the fossil energy crisis, as hydrogen fuel holds clean, pollution-free, and high-energy characteristics. However, the practical application of large-scale hydrogen production from water faces challenges such as high overpotentials, sluggish dynamics, and limited electrocatalytic lifetime associated with the hydrogen evolution reaction (HER). Here, we fabricated the sandwich structure of a Ni/Fe3O4@poly(3,4-ethylene-dioxythiophene)/Ni (Ni/Fe3O4@PEDOT/Ni) electrode and employed a strong magnet to obtain a magnetic electrode capable of achieving high-activity and durability for HER. Electrochemical analysis reveals that the activated magnetic electrode displays a significantly reduced overpotential and an extended electrocatalytic lifetime of 10 days. Notably, its stability is higher than that of non-magnetic Ni/Fe3O4/Ni and Ni/Fe3O4@PEDOT/Ni electrodes, primarily due to the support from magnetic force and the protective PEDOT layer. Moreover, the minute atomized droplets can form the H2O2 species in a moist environment, facilitating the formation of the NiO layer on the Ni surface, which plays a vital role in boosting catalytic activity. In conclusion, our magnetic electrode strategy, combined with the emergence of the NiO layer, offers valuable insights for the development of advanced HER electrodes.

Reviving Oxygen Evolution Electrocatalysis of Bulk La-Ni Intermetallics via Gaseous Hydrogen Engineering

A hydrogen processing strategy is developed to enable bulk LaNi₅ to attain high activity and long-term stability toward the electrocatalytic oxygen evolution reaction (OER). By a combination of in situ Raman and quasi in situ X-ray absorption (XAS) spectra, secondary-electron-excited scanning transmission electron microscopy (STEM) patterns as well as the Rietveld method and density functional theory (DFT) calculations, it is discovered that hydrogen-induced lattice distortion, grain refinement, and particle cracks dictate the effective reconstruction of the LaNi₅ surface into a porous hetero-nanoarchitecture composed of uniformly confined active γ-NiOOH nanocrystals by La(OH)₃ layer in the alkaline OER process. This significantly optimizes the charge transfer, structural integrity, active-site exposure, and adsorption energy toward the reaction intermediates. Benefiting from these merits, the overpotential (322 mV) at 100 mA cm^-2 for the hydrogen-processed OER catalyst deposited on nickel foam is reduced by 104 mV as compared to the original phase. Notably, it exhibits remarkable stability for 10 days at an industrial-grade current density of more than 560 mA cm^-2 in alkaline media.

Mesoporous crystalline Ti1-xSnxO2 (0 < x < 1) solid solution for a high-performance photocatalyst under visible light irradiation

We report a facile and effective inorganic polycondensation combined with aerosol-spray strategy towards high-performance photocatalyst by fabricating mesoporous Ti_1-xSn_xO₂ (0 < x < 1) solid solution. Such Ti_1-xSn_xO₂ nanocrystals with high Sn-doped contents are self-assembled into mesoporous spheres can effectively promote visible-light harvest and high quantum yield, leading a longer lifetime of the photoelectron-hole pairs and less recombination. Such the photocatalysts enhanced photocatalytic activity for the degradation of Rhodamine B (RhB). The representative Ti_0.9Sn_0.1O₂ and Ti_0.8Sn_0.2O₂ compounds reach an optimum degradation of ≈50% and 70%, respectively, after 120 min irradiation under visible irradiation. The mesoporous Ti_1-xSn_xO₂ solid solution could inhibit the recombination of electron-hole pairs, which promote reaction thermodynamics and kinetics for RhB degradation.

MOF-Derived Ultrathin Cobalt Molybdenum Phosphide Nanosheets for Efficient Electrochemical Overall Water Splitting

The development of high-performance and cost-effective earth-abundant transition metal-based electrocatalysts is of major interest for several key energy technologies, including water splitting. Herein, we report the synthesis of ultrathin CoMoP nanosheets through a simple ion etching and phosphorization method. The obtained catalyst exhibits outstanding electrocatalytic activity and stability towards oxygen and hydrogen evolution reactions (OER and HER), with overpotentials down to 273 and 89 mV at 10 mA cm⁻², respectively. The produced CoMoP nanosheets are also characterized by very small Tafel slopes, 54.9 and 69.7 mV dec⁻¹ for OER and HER, respectively. When used as both cathode and anode electrocatalyst in the overall water splitting reaction, CoMoP-based cells require just 1.56 V to reach 10 mA cm⁻² in alkaline media. This outstanding performance is attributed to the proper composition, weak crystallinity and two-dimensional nanosheet structure of the electrocatalyst.

Boosting oxygen evolution of layered double hydroxide through electronic coupling with ultralow noble metal doping

Electrocatalytic water oxidation is a rate-determining step in the water splitting process; however, its efficiency is significantly hampered by the limitations of cost-effective electrocatalysts. Here, an advanced Co(OH)₂ electrocatalyst with ultralow iridium (Ir) doping is developed to enable outstanding oxygen evolution reaction (OER) properties; that is, in a 1 M KOH medium, an overpotential of only 262 mV is required to achieve a current density of 10 mA cm^-2, and a small Tafel slope of 66.9 mV dec^-1 is achieved, which is markedly superior to that of the commercial IrO₂ catalyst (301 mV@10 mA cm^-2; 66.9 mV dec^-1). Through the combination of experimental data and a mechanism study, it is disclosed that the high intrinsic OER activity results from the synergistic electron coupling of oxidized Ir and Co(OH)₂, which significantly moderate the adsorption energy of the intermediates. Moreover, we have also synthesized Ru-Co(OH)₂ nanosheets and demonstrated the universal syntheses of Ir-doped CoM (M = Ni, Fe, Mn, and Zn) layered double hydroxides (LDHs).

IrOx @In2 O3 Heterojunction from Individually Crystallized Oxides for Weak-Light-Promoted Electrocatalytic Water Oxidation

Multi-field coupling, especially photo-assisted electrocatalysis, has recently been studied to further improve the oxygen evolution reaction (OER). In this study, an n-type cubic In₂ O₃ semiconductor is employed for the first time to load IrO_x species (Ir-In₂ O₃ mass ratio: 17.6 %). Consequently, the IrO_x @In₂ O₃ heterojunction, which exhibits outstanding OER performance promoted by weak-light irradiation, is formed. Notably, IrO_x (approximately 1.7 nm in size) and In₂ O₃ are observed to crystallize independently during heterogeneous nucleation with no Ir atoms doped in the In₂ O₃ lattice. This avoids Ir loss and ensures the full exposure of all Ir-based sites. The IrO_x @In₂ O₃ heterojunction exhibits enhanced electrocatalytic water oxidation with overpotential values of 190 and 231 mV at current densities of 10 and 50 mA cm^-2 , surpassing all IrO_x -based catalyst results reported to date. Nano-sized IrO_x on the surface, irradiated by the weak-light beam of LED-365 (1.8 mW cm^-2 ), can be fully activated as an OER site. Moreover, the overpotential is further reduced to 176 and 210 mV to deliver the corresponding current. This work is anticipated to aid in the design of more efficient multi-field coupling OER systems.

Thermodynamically driven metal diffusion strategy for controlled synthesis of high-entropy alloy electrocatalysts

We report a thermodynamically driven metal diffusion strategy for the controlled synthesis of high-entropy alloy (HEA) nanocrystals using electrospun carbon nanofibers (CNFs) as nanoreactors. This conceptual pathway is resistant to high temperatures and produces a series of medium-entropy alloy (MEA) and HEA nanocrystals supported on CNFs by adjusting the numbers and kinds of elements. The FeCoNiCrMn/CNFs obtained the lowest overpotential of 345 mV at 50 mA cm^-2 compared to MEA. The operando electrochemical Raman results indicate that the enhanced electron transfer from low-electronegativity Fe, Ni, Cr and Mn to the orbit of the Co atom makes Co a local negative charge center, leading to the decrease in absorption energy of OH.

Single-Atom Doping and High-Valence State for Synergistic Enhancement of NiO Electrocatalytic Water Oxidation

The NiO-based electrocatalytic oxygen evolution reaction (OER) of water splitting is recognized as a promising approach to produce clean H₂ fuel. However, the OER performance is still low, and especially, the overpotential is larger than 200 mV at the current density of 10 mA cm^-2 . Herein, an Ir@IrNiO sample is prepared with single-atom (SA) Ir⁴⁺ doping and surface metallic Ir nanoparticles loaded onto the NiO. Owing to the bonding of the loaded Ir with surface-exposed Ni²⁺ , the nearby Ni atoms exist in the +3 valence state, that is, the surface-loaded Ir particles behave like a stabilizer for the Ni³⁺ sites. Under the synergistic effect of SA Ir⁴⁺ and high-valance-state Ni³⁺ , the Ir@IrNiO nanostructure effectively reduces the overpotential to 195 mV at a current density of 10 mA cm^-2 . Moreover, it gives an Ir-content-normalized current density of 0.0457 A mg_Ir ^-1 , 72.1 times higher than that of the best commercialized IrO₂ (6.33 × 10^-4 A mg_Ir ^-1 ), under the condition of 1.5 V versus reversible hydrogen electrode. Operando Raman and X-ray absorption fine-structure (XAFS) measurements reveal that there are more surface-active species of Ni³⁺ , which adsorb and activate water molecules to form Ni³⁺ -*OH at low voltage, the intermediate of Ni⁴⁺ -•O is then formed at a relatively high bias voltage, and then the •O is transferred to the SA Ir⁴⁺ sites to generate Ir⁴⁺ -O-O with OH at increased voltage. This work can help design more SA-based highly active OER materials.

NixCu1−x/CuO/Ni(OH)2 as highly active and stable electrocatalysts for oxygen evolution reaction

Ni–Cu alloy-based nanomaterials are representative cost-effective materials that have been widely used as highly active and stable electrocatalysts for electrochemical energy applications, such as the water oxidation reaction, the methanol/ethanol reaction and many other small molecule oxidation reactions.