Synergistic Redox Reaction for Value-Added Organic Transformation via Dual-Functional Photocatalytic Systems

Inorganic-Organic Dual-Ligand-Regulated Photocatalysis of CdS@ZnxCd1-xS@ZnS Quantum Dots for Lignin Valorization

In a dual-functional lignin valorization system, a harmonious oxidation and reduction rate is a prerequisite for high photocatalytic performance. Herein, an efficient and facile ligand manipulating strategy to balance the redox reaction process is exploited via decorating the surface of the CdS@ZnxCd1-xS@ZnS gradient-alloyed quantum dots with both inorganic ligands of hexafluorophosphate (PF6-) and organic ligands of mercaptopropionic acid (MPA). Inorganic ion ligands in this system provide a promotion for intermediator reduction reactions. By optimizing the ligand composition on the quantum dot surface, we achieve precise control over the extent of oxidation and reduction, enabling selective modification of reaction products; that is, the conversion rate of 2-phenoxy-1-phenylethanol reached 99%. Surface engineering by regulating the ligand type demonstrates that PF6- and thiocyanate (SCN-) inorganic ion ligands contribute significantly toward electron transfer, while MPA ligands have beneficial effects on the hole-transfer procedure, which is predominantly dependent on their steric hindrance, electrostatic action, and passivation effect. The present study offers insights into the development of efficient quantum dot photocatalysts for dual-functional biomass valorization through ligand design.

S-vacancy-assisted fast charge transport and oriented ReS2 growth in twin crystal ZnxCd1-xS: an atomic-level heterostructure for dual-functional photocatalytic conversion

The achievement of dual-functional photocatalytic technology requires a photocatalyst with accelerated charge flow and purposeful active-site arrangement. In this study, we developed an oriented embedding strategy to induce ReS2 growth at the S vacancy in twin-crystal Zn0.5Cd0.5S solid solution (Sv-ZCS), obtaining an atomic-level heterostructure (ReS2/Sv-ZCS). The electronic structure calculations demonstrate that the charge density of the Zn atom around the S vacancy is higher than for other Zn atoms and the introduced S vacancy establishes a high-speed channel for electron transport via formed Zn-S-Re bonds at the interface between ReS2 and Sv-ZCS. Photogenerated electrons and holes gathered on Re atoms and Sv-ZCS, respectively, which achieves spatial charge separation and separated arrangement for redox sites. As a result, the optimized ReS2/Sv-ZCS heterostructure possesses high efficiency of electron injection (2.6-fold) and charge separation (8.44-fold), as well as excellent conductivity capability (20.16-fold). The photocatalytic performance of the ReS2/Sv-ZCS composite exhibits highly improved dual-functional activity with simultaneous H2 evolution and selective oxidation of benzyl alcohol. The reaction rate of benzaldehyde and H2 evolution reaches 125 mmol gcat-1 h-1 and 159 mmol gcat-1 h-1, which is the highest efficiency achieved so far for simultaneous coproduction of H2 fuel and organic chemicals on ReS2-based composites. This work enriches the application of ReS2-modified composites in a dual-functional photoredox system and also gives insight into the role of defects in electronic structure modification and activity improvement.

Electronic configuration inversion in CdIn2S4 for efficient photocatalytic hydrogen peroxide generation coupled with selective benzylamine oxidation

Vacancies engineering has sparked a huge interest in enhancing photocatalytic activity, but monovacancy simultaneously conducts as either electron or hole acceptor and redox reaction, worsening charge transfer and catalytic performance. Here, the concept of electronic inversion has been proposed through the simultaneous introduction of surface oxygen and S vacancies in CdIn2S4 (OSv-CIS). Consequently, under mild conditions, the well-designed OSv-CIS-200 demonstrated a strong rate of N-benzylidenebenzylamine production (2972.07 µmol g-1 h-1) coupled with Hydrogen peroxide (H2O2) synthesis (2362.33 µmol g-1 h-1) (PIH), which is 12.4 times higher than that of CdIn2S4. Density functional theory (DFT) simulation and characterization studies demonstrate that oxygen is introduced into the lattice on the surface of the material, reversing the charge distribution of the S vacancy and enhancing the polarity of the total charge distribution. It not only provides a huge built-in electric field (BEF) for guiding the orientation of the charge transfer, but also acts as a long-distance active site to accelerate reaction and prevent H2O2 decomposition. Our work offers a straightforward connection between the atomic defect and intrinsic properties for designing high-efficiency materials.

Efficient purification of a nitrate and chlorate mixture in water via photoredox activated intermediate coupling-decoupling pathway

Nitrate (NO3-) is a widespread contaminant that threatens human health and ecological safety. Meanwhile, the disinfection byproducts chlorate (ClO3-) is generated inevitably in conventional wastewater treatment. Therefore, the contaminants mixture of NO3- and ClO3- are universal in common emission units. Photocatalysis technology is a feasible approach for the synergistic abatement of contaminant mixture, where matching suitable oxidation reactions is a potential strategy to improve the photocatalytic reduction reactions. Herein, formate (HCOOH) oxidation is introduced to facilitate the photocatalytic reduction of the NO3- and ClO3- mixture. As a result, high purification efficiency of NO3- and ClO3- mixture are achieved, evidenced by 84.6% e--dependent removal of the mixture at a reaction time of 30 min, with 94.5% N2 selectivity and 100% Cl- selectivity, respectively. Specifically, by the close combination of in-situ characterizations and theoretical calculations, the detailed reaction mechanism is revealed, in which the intermediate coupling-decoupling route from NO3- reduction and HCOOH oxidation is established by the chlorate-induced photoredox activation, leading to the significantly enhanced efficiency for the wastewater mixture purification. The practical application of this pathway is established for simulated wastewater to show its wide applicability. This work provides new insights into photoredox catalysis technology for its environmental application.

Superexchange-induced Pt-O-Ti3+ site on single photocatalyst for efficient H2 production with organics degradation in wastewater

Efficient photocatalytic H2 production from wastewater instead of pure water is a dual solution to the environmental and energy crisis, but due to the rapid recombination of photoinduced charge in the photocatalyst and inevitable electron depletion caused by organic pollutants, a significant challenge of dual-functional photocatalysis (simultaneous oxidative and reductive reactions) in single catalyst is designing spatial separation path for photogenerated charges at atomic level. Here, we designed a Pt-doped BaTiO3 single catalyst with oxygen vacancies (BTPOv) that features Pt-O-Ti3+ short charge separation site, which enables excellent H2 production performance (1519 μmol·g-1·h-1) while oxidizing moxifloxacin (k = 0.048 min-1), almost 43 and 98 times than that of pristine BaTiO3 (35 μmol·g-1·h-1 and k = 0.00049 min-1). The efficient charge separation path is demonstrated that the oxygen vacancies extract photoinduced charge from photocatalyst to catalytic surface, and the adjacent Ti3+ defects allow rapid migration of electrons to Pt atoms through the superexchange effect for H* adsorption and reduction, while the holes will be confined in Ti3+ defects for oxidation of moxifloxacin. Impressively, the BTPOv shows an exceptional atomic economy and potential for practical applications, a best H2 production TOF (370.4 h-1) among the recent reported dual-functional photocatalysts and exhibiting excellent H2 production activity in multiple types of wastewaters.

Construction of ZnIn2 S4 /CdS/PdS S-Scheme Heterostructure for Efficient Photocatalytic H2 Production

It is facing a tremendous challenge to develop the desirable hybrids for photocatalytic H₂ generation by integrating the advantages of a single semiconductor. Herein, an all-sulfide ZnIn₂ S₄ /CdS/PdS heterojunction is constructed for the first time, where CdS and PdS nanoparticles anchor in the spaces of ZnIn₂ S₄ micro-flowers due to the confinement effects. The morphology engineering can guarantee rapid charge transfer owing to the short carrier migration distances and the luxuriant reactive sites provided by ZnIn₂ S₄ . The S-scheme mechanism between ZnIn₂ S₄ and CdS assisted by PdS cocatalyst is testified by in situ irradiated X-ray photoelectron spectroscopy and electron paramagnetic resonance (EPR), where the electrons and holes move in reverse driven by work function difference and built-in electric field at the interfaces. The optimal ZnIn₂ S₄ /CdS/PdS performs a glaring photocatalytic activity of 191.9 µmol h^-1 (10 mg of catalyst), and the largest AQE (apparent quantum efficiency) can reach a high value of 26.26%. This work may afford progressive tactics to design multifunctional photocatalysts.

Controlling the Photocatalytic Activity and Benzylamine Photooxidation Selectivity of Bi2WO6 via Ion Substitution: Effects of Electronegativity

Doping or ion substitution is often used as an effective strategy to improve photocatalytic activities of several semiconductors. Most frequently, the dopants provide extra states to increase light absorption, alter the electronic structure, or lower the carrier recombination. This work focuses on ion substitution in Bi₂WO₆, where the dopants modify band-edge potentials of the catalysts. Specifically, we investigate how the electronegativity (EN) of the dopant could be used to tune the band-edge potentials and how such changes influence the photocatalytic mechanism. Compared to Te that has a lower EN, I lowers the band-edge potentials. While substitutions with both ions enhance Rh B photodegradation and benzylamine photooxidation, the modified band potentials of I-doped Bi₂WO₆ influence the benzylamine photooxidation pathway, resulting in higher selectivity. Additionally, substitution of I⁷⁺ in the Bi₂WO₆ lattice improves the morphologies, decreases the band-gap energy, and reduces the carrier recombination. As a result, I-doped Bi₂WO₆ shows almost 3 times higher %conversion while maintaining 100% selectivity in the oxidative coupling of benzylamine. The findings here signify the importance of the choices of dopants on the photocatalytic reactions and would benefit the design of other related materials for such applications.

Crystal phase engineering of Ru for simultaneous selective photocatalytic oxidations and H2 production

Noble metal nanoparticles are often used as cocatalysts to enhance the photocatalytic efficiency. While the effect of cocatalyst nanoparticle size and shape has widely been explored, the effect of the crystal phase is largely overlooked. In this work, we investigate the effect of Ru nanoparticle crystal phase, specifically regular hexagonal close-packed (hcp) and allotropic face-centered cubic (fcc) crystal phases, as cocatalyst decorated onto the surface of TiO₂ photocatalysts. As reference photocatalytic reaction the simultaneous photocatalytic production of benzaldehyde (BAD) and H₂ from benzyl alcohol was chosen. Both the fcc Ru/TiO₂ and hcp Ru/TiO₂ composites exhibit enhanced BAD and H₂ production rates compared to pristine TiO₂ due to the formation of a Schottky barrier promoting the photogenerated charge separation. Moreover, a 1.9-fold photoactivity enhancement of the fcc Ru/TiO₂ composite is achieved as compared to the hcp Ru/TiO₂ composite, which is attributed to the fact that the fcc Ru NPs are more efficient in facilitating the charge transfer as compared to hcp Ru NPs, thus inhibiting the recombination of electron-hole pairs and enhancing the overall photoactivity.

Photochemistry Journey to Multielectron and Multiproton Chemical Transformation

The odyssey of photochemistry is accompanied by the journey to manipulate "electrons" and "protons" in time, in space, and in energy. Over the past decades, single-electron (1e^-) photochemical transformations have brought marvelous achievements. However, as each photon absorption typically generates only one exciton pair, it is exponentially challenging to accomplish multielectron and proton photochemical transformations. The multistep differences in thermodynamics and kinetics urgently require us to optimize light harvesting, expedite consecutive electron transfer, manipulate the interaction of catalysts with substrates, and coordinate proton transfer kinetics to furnish selective bond formations. Tandem catalysis enables orchestrating different photochemical events and catalytic transformations from subpicoseconds to seconds, which facilitates multielectron redox chemistries and brings consecutive, value-added reactivities. Joint efforts in molecular and material design, mechanistic understanding, and theoretical modeling will bring multielectron and proton synthetic opportunities for fuels, fertilizers, and chemicals with enhanced versatility, efficiency, selectivity, and scalability, thus taking better advantage of photons (i.e., sunlight) for our sustainable society.

Photocatalytic Anaerobic Dehydrogenation of Alcohols over Metal Halide Perovskites: A New Acid-Free Scheme for H2 Production

Photocatalytic H₂ evolution from haloid acid (HX) solution by metal halide perovskites (MHPs) has been intensively investigated; however, the corrosive acid solution severely restricts its practical operability. Therefore, developing acid-free schemes for H₂ evolution using MHPs is highly desired. Here, we investigate the photocatalytic anaerobic dehydrogenation of alcohols over a series of MHPs (APbX₃, A = Cs⁺, CH₃NH₃⁺ (MA), CH(NH₂)₂⁺ (FA); X = Cl^-, Br^-, I^-) to simultaneously produce H₂ and aldehydes. Via the coassembly of Pt and rGO nanosheets on MAPbBr₃ microcrystals, the optimal MAPbBr₃/rGO-Pt reaches a H₂ evolution rate of 3150 μmol g^-1 h^-1 under visible light irradiation (780 nm ≥ λ ≥ 400 nm), which is more than 105-fold higher than pure MAPbBr₃ (30 μmol g^-1 h^-1). The present work not only brings new ample opportunities toward photocatalytic H₂ evolution but also opens up new avenues for more effective utilization of MHPs in photocatalysis.

Metal Halide Perovskite Based Heterojunction Photocatalysts

With fascinating photophysical properties and a strong potential to utilize solar energy, metal halide perovskites (MHPs) have become a prominent feature within photocatalysis research. However, the effectiveness of single MHP photocatalysts is relatively poor. The introduction of a second component to form a heterojunction represents a well-established route to accelerate carrier migration and boost reaction rates, thus increasing the photoactivity. Recently, there have been several scientific advances related to the design of MHP-based heterojunction photocatalysts, including Schottky, type II, and Z-scheme heterojunctions. In this Review, we systematically discuss and critically appraise recent developments in MHP-based heterojunction photocatalysis. In addition, the techniques for identifying the type of active heterojunctions are evaluated and we conclude by briefly outlining the ongoing challenges and future directions for promising photocatalysts based on MHP heterojunctions.

Application of aluminosilicate clay mineral-based composites in photocatalysis

Aluminosilicate clay mineral (ACM) is a kind of typical raw materials that used widely in manufacturing industry owing to the abundant reserve and low-cost exploring. In past two decades, in-depth understanding on unique layered structure and abundant surface properties endows ACM in the emerging research and application fields. In field of solar-chemical energy conversion, ACM has been widely used to support various semiconductor photocatalysts, forming the composites and achieving efficient conversion of reactants under sunlight irradiation. To date, classic ACM such as kaolinite and montmorillonite, loaded with semiconductor photocatalysts has been widely applied in photocatalysis. This review summaries the recent works on ACM-based composites in photocatalysis. Focusing on the properties of surface and layered structure, we elucidate the different features in the composition with various functional photocatalysts on two typical kinds of ACM, i.e., type 1:1 and type 2:1. Not only large surface area and active surface hydroxyl group assist the substrate adsorption, but also the layered structure provides more space to enlarge the application of ACM-based photocatalysts. Besides, we overview the modifications on ACM from both external surface and the inter-layer space that make the formation of composites more efficiently and boost the photo-chemical process. This review could inspire more upcoming design and synthesis for ACM-based photocatalysts, leading this kind of economic and eco-friendly materials for more practical application in the future.

Photocatalytic Anaerobic Oxidation of Aromatic Alcohols Coupled With H2 Production Over CsPbBr3/GO-Pt Catalysts

Metal halide perovskites (MHPs) have been widely investigated for various photocatalytic applications. However, the dual-functional reaction system integrated selective organic oxidation with H₂ production over MHPs is rarely reported. Here, we demonstrate for the first time the selective oxidation of aromatic alcohols to aldehydes integrated with hydrogen (H₂) evolution over Pt-decorated CsPbBr₃. Especially, the functionalization of CsPbBr₃ with graphene oxide (GO) further improves the photoactivity of the perovskite catalyst. The optimal amount of CsPbBr₃/GO-Pt exhibits an H₂ evolution rate of 1,060 μmol g⁻¹ h⁻¹ along with high selectivity (>99%) for benzyl aldehyde generation (1,050 μmol g⁻¹ h⁻¹) under visible light (λ > 400 nm), which is about five times higher than the CsPbBr₃-Pt sample. The enhanced activity has been ascribed to two effects induced by the introduction of GO: 1) GO displays a structure-directing role, decreasing the particle size of CsPbBr₃ and 2) GO and Pt act as electron reservoirs, extracting the photogenerated electrons and prohibiting the recombination of the electron–hole pairs. This study opens new avenues to utilize metal halide perovskites as dual-functional photocatalysts to perform selective organic transformations and solar fuel production.

Simultaneous photocatalytic H2 generation and organic synthesis over crystalline-amorphous Pd nanocube decorated Cs3Bi2Br9

Cs3Bi2Br9 decorated with crystalline-amorphous Pd nanocubes as cocatalyst is reported to photocatalytically coproduce ca. 1400 μmol h−1 g−1 of H2 and benzaldehyde from the selective benzyl alcohol oxidation. This route...

Selective photocatalytic oxidation of cyclohexene coupled with hydrogen evolution from water splitting over Ni/NiO/CdS and mechanism insight

The reaction process of photocatalytic oxidation of cyclohexene including the oxidation products and oxidation active substance.

Effect of Defects on Optical, Electronic, and Interface Properties of NiO/SnO2 Heterostructures: Dual-Functional Solar Photocatalytic H2 Production and RhB Degradation

Photocatalytic H₂ evolution and organic pollutant oxidation have witnessed a radical surge in recent times. However, this integration demands spatial charge separation and unique interface properties for a trade-off between oxidation and reduction reactions. In the current work, defect engineering of NiO/SnO₂ nanoparticles aided in altering the optoelectronics and interface properties and enhanced photocatalytic activity. After annealing the catalysts in a N₂ atmosphere, the hydroxyl groups were replaced by water molecules through surface modification. The photoexcited holes accumulated on SnO₂ break the water molecules and facilitate the reduction of protons on NiO; this is known as spatial separation. Meanwhile, direct hole oxidation, an oxygen reduction reaction, ensures the degradation activity in this 2-fold system. By defect engineering, the limitations of SnO₂ such as higher H₂O adsorption, wide bandgap (reduced from 3.02 to 1.88 eV), and electronic properties were addressed. The H₂ production in the current work has attained a value of 3732 μmol/(g h), which is 2.9 times that of the previous best reported under sunlight. Recyclability tests confirmed the stability of vacancies by promoting the reoxidation of defect states during photocatalytic activity. Additionally, efforts were made to study the effect of defect density on the photocurrent, the electrical resistance, and the mechanism of photocatalytic reactions. Electrochemical characterizations, UPS, XPS, UV-DRS, and PL were employed to understand the influence of defects on the bandgap, charge recombination, charge transport, charge carrier lifetime, and the interface properties that are responsible for photocatalytic activity. In this regard, it was understood that maintaining the optimal defect concentration is important for higher photocatalytic efficiencies, as the defect optimality preserves key photocatalytic properties. Apart from characterizations, the photocatalytic results suggest that excess defect density triggers the undesired thermodynamically favored back reactions, which greatly hampered the H₂ yield of the process.

Donor-Acceptor Pairs in Covalent Organic Frameworks Promoting Electron Transfer for Metal-Free Photocatalytic Organic Synthesis

The donor-acceptor-type covalent organic frameworks (COFs) have recently gained increasing interest in photocatalysis, but the photoinduced electron-transfer regimes in the COFs are underexplored. Herein, we demonstrate a designed porphyrinic COF possessing a donor-acceptor structure together with its photocatalytic performance in aerobic coupling of primary amines. The COF could be photoexcited by the full range of visible light to generate electron-hole pairs that could be separated by donor-acceptor pairs. Electron transfer as the mechanism of the reaction from anthracene unit to porphyrin unit was revealed by natural transition orbitals analyses. The electrons migrate to the adsorbed O₂ to generate reactive oxidative species. The COF displays remarkable photocatalytic activities in the coupling of amines to imines, which can be explained mainly by the sufficient charge separation and mobility, benefiting from the donor-acceptor pairs in the COF and their interactions to the reactants and intermediates.

Recent Advancements in Photocatalytic Valorization of Plastic Waste to Chemicals and Fuels

The continuous rise in plastic waste raises serious concerns about the ensuing effects on the pollution of global environment and loss of valuable resources. Developing efficient approach to recycle the plastic has been an urgent demand for realizing a sustainable circular economy. Photocatalytic valorization directly utilizes solar energy to transform plastic pollutant into chemicals and fuels, which is hardly implemented by traditional mechanical recycling and incineration strategies, thus offering a promising approach to address the contemporary waste and energy challenges. Here, we focus on the recent advances in the high-value utilization of plastic waste through photocatalysis. The basic principle and different reaction pathways for the photocatalytic valorization of plastic waste are presented. Then, the developed representative photocatalyst systems and converted products are elaborately discussed. At last, the review closes with critical thoughts on research challenges along with some perspectives for further development of this emerging and fascinating filed.