Distortion of the Coordination Structure and High Symmetry of the Crystal Structure in In4SnS8 Microflowers for Enhancing Visible-Light Photocatalytic CO2 Reduction

Prohibiting the electron-phonon coupling effect in tungsten trioxide nanosheet colloid with enhanced photocatalytic antibacterial capacity

The serious combination of abundant electrons/holes in bulk primarily hinders the efficiency in the photocatalytic reaction. It is crucial to control the spatial charge dynamics through delicately designing the crystal configuration of photocatalyst. In this work, a modified tungsten trioxide nanosheet colloid (M-WO3) was synthesized by an ion exchange method. Compared to pristine WO3 (P-WO3), the crystal lattice vibration frequency of M-WO3 increases from 2.8 meV to 4.3 meV, which effectively prohibits electron-phonon coupling and powerfully accelerates the separation and transfer of photoinduced charge carriers. Irradiated by visible-light, M-WO3 shows much higher photocatalytic bacterial inactivation performance than P-WO3. In addition, this regulation method increases the surface charges of the WO3 colloid to improve its stability, which endows this colloid photocatalyst with broad prospects in practical photocatalytic antibacterial applications. This work offers guidance to construct efficiently separated photoinduced electron/hole pairs of the colloid photocatalyst by designing its crystal structure.

Reinforcing oxygen reduction reaction and accelerating charge migration kinetics on In4SnS8 by polypyrrole for photocatalytic hydrogen peroxide production

Solar light-driven hydrogen peroxide (H2O2) production through the two-electron oxygen reduction reaction (ORR) from the earth-abundant O2 and water is a potential alternative to the energy-consuming anthraquinone oxidation process, although the activity of the common photocatalysts is still insufficient to satisfy the industrial demands. Poor accessibility of O2 to surface/interface and fast carrier recombination is the limiting-factor for catalytic systems. Herein, we develop a nanohybrid photocatalysts by introducing 1D conducting polymer of polypyrrole (PPy) nanotube on In4SnS8 to promote H2O2 evolution under visible light, obtaining up to 254.8 μM in 2 h, which is 2.4- and 13-fold larger than that of individual In4SnS8 and PPy. The detailed characterizations of hybrid structure, O2 adsorption behaviors, charge carrier dynamics over PPy/In4SnS8 in conjunction with computational calculations corroborate that the modification of PPy could enlarge the amount of O2 adsorption amount, expedite the cycle of O2 adsorption/desorption and accelerate the transportation of electrons from In4SnS8 to the interface, eventually speeding up H2O2 photoproduction via indirect 2e- ORR pathway. This work establishes a paradigm of regulating the interfacial microenvironment by polymer for boosting H2O2 photogeneration through high selectivity of ORR.

Matched Redox Kinetics on Triazine-Based Carbon Nitride/Ni(OH)2 for Stoichiometric Overall Photocatalytic CO2 Conversion

Mismatched reaction kinetics of CO2 reduction and H2O oxidation is the main obstacle limiting the overall photocatalytic CO2 conversion. Here, a molten salt strategy is used to construct tubular triazine-based carbon nitride (TCN) with more adsorption sites and stronger activation capability. Ni(OH)2 nanosheets are then grown over the TCN to trigger a proton-coupled electron transfer for a stoichiometric overall photocatalytic CO2 conversion via "3CO2 + 2H2O = CH4 + 2CO + 3O2." TCN reduces the energy barrier of H2O dissociation to promote H2O oxidation to O2 and supply sufficient protons to Ni(OH)2, whereby the CO2 conversion is accelerated due to the enhanced proton-coupled electron transfer process enabled by the sufficient proton supply from TCN. This work highlights the importance of matching the reaction kinetics of CO2 reduction and H2O oxidation by proton-coupled electron transfer on stoichiometric overall photocatalytic CO2 conversion.

Photocatalytic Activity of BaAl2O4 for Water Purification

Degradation of dyes under natural light sources is one of the most active research areas in basic science for greener technology. In this context, the photocatalytic activity of semiconductors has received massive attention in solving water treatment-related issues as these possess enormous potential for degrading organic impurities. Here, we report that barium aluminate (BaAl2O4, BAO), which has been extensively studied for photoluminescence applications, is found to be a highly potent candidate for photocatalytic activities. We have explored the degradation of dyes (meant for water purification) by using the photocatalytic properties of pure and Dy- and Yb-codoped BAO. Crystal structure, electron microscopy, and Raman analysis of the autocombustion-synthesized pure and codoped BAO samples revealed significant morphological changes such as increased particle size and stabilization of rod-like structures. UV-vis absorbance measurements confirm the presence of multiple bandgaps in the BAO samples, which is substantiated by X-ray absorption spectroscopy measurements. Photocatalytic degradation studies of methylene blue (MB) dye (with different catalyst concentrations, dopings, and MB dye concentrations) have been carried out by using BAO. The kinetics of the photocatalytic degradation measurements has been explained by the Boltzmann distribution function, and the fastest (in less than 40 min), with more than 99% degradation of MB impurity, is reported here for the first time in BAO compounds. Synthesized BAO samples show excellent cyclic stability, which is essential for their potential applications in environmental remediation. The trade-off between the enhancement of surface area and increased particle size is considered the key parameter for controlling the photocatalytic performance of the BAO catalyst after Dy and Yb codopings.

Metal to non-metal sites of metallic sulfides switching products from CO to CH4 for photocatalytic CO2 reduction

The active center for the adsorption and activation of carbon dioxide plays a vital role in the conversion and product selectivity of photocatalytic CO2 reduction. Here, we find multiple metal sulfides CuInSnS4 octahedral nanocrystal with exposed (1 1 1) plane for the selectively photocatalytic CO2 reduction to methane. Still, the product is switched to carbon monoxide on the corresponding individual metal sulfides In2S3, SnS2, and Cu2S. Unlike the common metal or defects as active sites, the non-metal sulfur atom in CuInSnS4 is revealed to be the adsorption center for responding to the selectivity of CH4 products. The carbon atom of CO2 adsorbed on the electron-poor sulfur atom of CuInSnS4 is favorable for stabilizing the intermediates and thus promotes the conversion of CO2 to CH4. Both the activity and selectivity of CH4 products over the pristine CuInSnS4 nanocrystal can be further improved by the modification of with various co-catalysts to enhance the separation of the photogenerated charge carrier. This work provides a non-metal active site to determine the conversion and selectivity of photocatalytic CO2 reduction.

Functionalized Regulation of Metal Defects in ln2S3 of p-n Homojunctions

The introduction of metal vacancies into n-type semiconductors could efficiently construct intimate contact interface p-n homojunctions to accelerate the separation of photogenerated carriers. In this work, a cationic surfactant occupancy method was developed to synthesize an indium-vacancy (V_In)-enriched p-n amorphous/crystal homojunction of indium sulfide (A/C-IS) for sodium lignosulfonate (SL) degradation. The amount of V_In in the A/C-IS could be regulated by varying the content of added cetyltrimethylammonium bromide (CTAB). Meanwhile, the steric hindrance of CTAB produced mesopores and macropores, providing transfer channels for SL. The degradation rates of A/C-IS to SL were 8.3 and 20.9 times higher than those of crystalline In₂S₃ and commercial photocatalyst (P25), respectively. The presence of unsaturated dangling bonds formed by V_In reduced the formation energy of superoxide radicals (^•O₂^-). In addition, the inner electric field between the intimate contact interface p-n A/C-IS promoted the migration of electron-hole pairs. A reasonable degradation pathway of SL by A/C-IS was proposed based on the above mechanism. Moreover, the proposed method could also be applicable for the preparation of p-n homojunctions with metal vacancies from other sulfides.

Engineering interface structures for heterojunction photocatalysts

Solar photocatalysis is the most ideal solution to global energy concerns and environmental deterioration nowadays. The heterojunction combination has become one of the most successful and effective strategies to design and manufacture composite photocatalysts. Heterojunction structures are widely documented to markedly improve the photocatalytic behavior of materials by enhancing the separation and transfer of photogenerated charges, widening the light absorption range, and broadening redox potentials, which are attributed to the presence of both build-in electric fields at the interface of two different materials and the complementarity between different electron structures. So far, a large number of heterojunction photocatalytic materials have been reported and applied for water splitting, reduction of carbon dioxide and nitrogen, environmental cleaning, etc. This review outlines the recent accomplishments in the design and modification of interface structures in heterojunction photocatalysts, aiming to provide some useful perspectives for future research in this field.

Interfacial C-S Bonds of g-C3 N4 /Bi19 Br3 S27 S-Scheme Heterojunction for Enhanced Photocatalytic CO2 Reduction

Step-scheme (S-scheme) heterojunctions have been extensively studied in photocatalytic carbon dioxide (CO₂ ) reduction due to their excellent charge separation and high redox ability. The built-in electric field at the interface of a S-scheme heterojunction serves as the driving force for charge transfer, however, the poor interfacial contact greatly restricts the carrier migration rate. Herein, we synthesized the g-C₃ N₄ /Bi₁₉ Br₃ S₂₇ S-scheme heterostructure through in situ deposition of Bi₁₉ Br₃ S₂₇ (BBS) on porous g-C₃ N₄ (P-CN) nanosheets. The C-S bonds formed at the interface help to enhance the built-in electric field, thereby promoting the charge transfer and separation. As a result, the CO₂ reduction reaction performance of 10 %Bi₁₉ Br₃ S₂₇ /g-C₃ N₄ (BBS/P-CN) reaches 32.78 μmol g^-1 h^-1 , which is 341.4 and 18.7 times higher than that of pure BBS and P-CN, respectively. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) prove the presence of chemical bonds (C-S) between the P-CN and BBS. The S-scheme charge-transfer mechanism was analyzed via XPS and density functional theory (DFT) calculations. This work provides a new idea for designing heterojunction photocatalysts with interfacial chemical bonds to achieve high charge-transfer and catalytic activity.

One-pot solvothermal synthesis of flower-like Fe-doped In2S3/Fe3S4 S-scheme hetero-microspheres with enhanced interfacial electric field and boosted visible-light-driven CO2 reduction

S-scheme heterojunctions hold great potential for CO2 photoreduction into solar fuels, but their activities are severely limited by the low efficiency of interfacial charge transfer. In this work, a facile one-pot solvothermal reaction has been developed to dope Fe into flower-like In2S3/Fe3S4 hetero-microspheres (Fe-In2S3/Fe3S4 HMSs), which are demonstrated as an efficient S-scheme photocatalyst for visible-light-driven CO2 photoreduction. The doping of Fe not only reduces the bandgap of In2S3 and thus extends the optical response to the visible-light region, but also increases the densities of donors and sulfur vacancies, which leads to an elevated Fermi level (Ef). The difference of Ef between In2S3 and Fe3S4 is enlarged and their band bending at the interface is therefore enhanced, which results in promoted carriers transfer in the S-scheme pathway due to the reinforced interfacial electric field. Moreover, Fe-doped In2S3 reduces the formation energy of the *CO intermediate, which thermodynamically favors the CO evolution at the surface. As a result, the Fe-In2S3/Fe3S4 HMSs exhibit a significantly boosted CO2 photoreduction activity in comparison with bare In2S3 and Fe-In2S3 samples. This work demonstrates the great potential of heteroatom-engineered S-scheme photocatalysts for CO2 photoreduction.